Error in system logs of the abap engine
Hello All,
I got a incident for "error in system logs of the abap engine".When i checked in SM21,
13:50:18 BTC 024 001 SETUPADMIN SM59 Q0 W
SETUPADMIN deletes RFC destination
0000000000011DECBA9958E212E09B2C
05782 Background Processor No. 024 SETUPADMIN
1 SM59 /ITSC/DSA_PERIODICAL T Transaction Problem STSK
A destination has been deleted in SM59, destination
maintenance of RFC.
Problems can occur if this destination is still used in existing
ABAP
I checked in sm37,the job /ITSAM/HEALTHCHECK which
runs under the program /ITSC/DSA_PERIODICAL with frequency
10 mins is in finished state.
Kindly help me out, why this logs is always written in sm21 even if
the job got finished .
Thanks & Regards,
Harshavardhan
i have the same error but my first select is
SELECT QMNUM QMTXT QMDAT AUFNR OBJNR QMNAM QMART BTPLN IWERK BEBER INGRP EQUNR SERIALNR MATNR
INTO TABLE GT_VIQMEL
FROM VIQMEL
WHERE QMNUM IN S_QMNUM .
please tell me how to solve this error when i run 24000 raw this select dump.
ASAP
thanks
Eman elgammal.
Similar Messages
-
regarding mountain lion server: clients experience intermittent service connections. the server system log has the following error- Client handshake failed (6):113: Server not accepting client connections. any suggestions would be greatly appreciated - thank you
Hi Jason
I was getting the same behavior after Apple support had me delete some plist files to get Airplay going. I was also getting the following error:
the error occurred while processing a command of type 'writesettings' in the plug-in 'server vpn'
I went into ~/Library/Preferences/ and /Library/Preferences/ and deleted every plist contating the word server. I had to re-set up my server (meaning walk through some intial steps) but all of my settings were still there after that and everything started working again.
Just a thought, obviously try at your own risk but it worked for me.
Kellen -
I looked at system.log in the system profiler today and see lots of activity at 2 a.m. when I was fast asleep, should I worry? It seems to reset hostname and mentions frequent transitions for interface, looks weird to me (I'm not a teckie!)
This is a section:
May 12 02:05:10 wendy-drapers-macbook configd[14]: setting hostname to "wendy-drapers-macbook.local"
May 12 02:05:29 wendy-drapers-macbook kernel[0]: Auth result for: 00:26:44:14:17:a3 MAC AUTH succeeded
May 12 02:05:29 wendy-drapers-macbook kernel[0]: AirPort: Link Up on en1
May 12 02:05:29 wendy-drapers-macbook mDNSResponder[16]: Note: Frequent transitions for interface en1 (192.168.1.92); network traffic reduction measures in effect
May 12 02:05:29 macbook configd[14]: setting hostname to "macbook.lan"
May 12 02:05:31 macbook mDNSResponder[16]: Note: Frequent transitions for interface en1 (FE80:0000:0000:0000:021E:C2FF:FEB3:1A3E); network traffic reduction measures in effect
May 12 02:05:34 macbook com.apple.launchd[1] (org.samba.nmbd): Throttling respawn: Will start in 5 secondsI've been seeing messages exactly like that (and many, many other kinds) in the Console since the first version of OS X. They look menacing but are harmless.
You don't need any kind of security software.
Just surf the web carefully, pay attention to where you're going and don't install anything that you don't recognize. If you are asked to enter an admin user name and password, DON'T. Unless you know for sure that you initiated the installation from a known and reliable source (like Apple).
Mac malware relies on social engineering. No amount of security/anti-virus, blah, blah, blah software is going to help. -
Performance of XSL Mapping in the ABAP Engine
Hi All,
Is the performance of XSL Mapping in the ABAP Engine better than java and graphical mapping. XSLT on the java stack has performance issue handling large documents.I want to know how far XSL Mapping in the ABAP Engine performs when compared to java/graphical mapping in the context of large inputs(>1MB).
Anticipating your valuable inputs.
Regards,
Sudharshan N AHi Sudarshan,
Please go through the below link for a very clear understanding of the performance of the Mapping techniques...
/people/udo.martens/blog/2006/08/23/comparing-performance-of-mapping-programs
Hope this helps
Regards
Kiran.. -
How to access the java stack table "xi_af_msg" from the ABAP engine.
Hello Guys,
How to access the java stack table "xi_af_msg" from the ABAP engine.
I need to access this table.These 3 are the tables that are for XI Adapter in ABAP Stack.
SWFRXICNT
SWFRXIHDR
SWFRXIPRC
You can also try the following tables.
SXMSAEADPMOD XI: Adapter and Module Information
SXMSAEADPMODCHN XI: Adapter Module Chains
SXMSAEAGG XI: Adapter Runtime Data (Aggregated)
SXMSAERAW XI: Adapter Runtime Data (Raw Data)
Cheers,
Sarath.
Award if helpful. -
Restrict the number of users logging onto the JAVA engine
hi
IS it possible to restrict the number of users logging on the JAVA Engine, if YES, how ?
Thanks
Jonu JoyThanks for the replies, here's a little more info...
We're working on project which allows a company to buy user licenses to access our portal. So if a company has bought 5 licenses, the 6th user for that company will not be able to login.
*Note: We treat each Access Key in the portal as a company.
The way we determine if the user belongs to a company is by the AccessKey that is assigned to that user. We're not depending on IP addresses at all.
Hope this clears the issue !
I think we'll have to write some custom code to accomplish this.
Thanks,
harman -
HI all,
this is not a security query, but I need help in this regard.
Following error msg i showing in system log. I'm getting this error whenever i'm trying to read the Job in SM37. And in some cases I'm unable to see the spool list which is generated by the bg jobs. what coul be the reason?
<b>> Error reading job log JOBLGX15165600X64603
Error 2 for write/read access to a file. File = /usr/sap/PRD/SYS/global/999JOBLG/0001X15165600X64603
BP_JOBLOG_SHOW: Failed to display jobs. Reason:</b>Thanks Jose
Porblem is solved.
/sapmnt/PRD/global and profile are not mounted on that server.
Thnak u so much for ur cooperation.
Regards,
Raja -
Error: A document processed by the JRC engine cannot be opened in the C++
Hi,
I developed a Web Application, wich have some Crystal Reports. I am using VS2010, C#, Framework 4 and I installed the last version of CR.
The thing is that if I run the application with Visual Studio it works fine, it show the reportes without errors, but when I deploy it (in the same machine, just to try), I am getting the error:
Unsupported Operation. A document processed by the JRC engine cannot be opened in the C++ stack
[COMException (0x80041811): Unsupported Operation. A document processed by the JRC engine cannot be opened in the C+ stack+
+CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options) 0
+CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options) 147
+CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() 422
[CrystalReportsException: Could not load the report.]
+CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() 549
+CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob) 1613
+CrystalDecisions.CrystalReports.Engine.ReportClass.Load(String reportName, OpenReportMethod openMethod, Int16 parentJob) 161
+CrystalDecisions.CrystalReports.Engine.ReportDocument.EnsureLoadReport() 168
+CrystalDecisions.CrystalReports.Engine.ReportDocument.get_ReportDefinition() 73
+AplicacionWeb.Shared.PrintReports.ImprimirReservaEvento(Int32 idEvento, Int32 idTipoEvento, String rutaNombreReporte) 143
+System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) 154
+System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 3707
This is the portion of code that calls the report.
protected void btnImprimirReserva_Click(object sender, EventArgs e)
{ PrintReports printReports = new PrintReports();
string ruta = string.Empty;
int idEvento = int.Parse(hdnIdEvento.Value);
int idTipoEvento= int.Parse(ddlTipoDeEvento.SelectedValue);
ruta = Server.MapPath("/Reportes
rptEvento.rpt");
printReports.ImprimirReservaEvento(idEvento, idTipoEvento, ruta);
public void ImprimirReservaEvento(int idEvento, int idTipoEvento, string rutaNombreReporte)
{ int cantCopias = (idTipoEvento == TiposEvento.Egreso.GetHashCode() ? 3 : 2);
TextObject originalDuplicado;
rptEvento oReporte = new rptEvento();
oReporte.FileName = rutaNombreReporte;
originalDuplicado = (TextObject)oReporte.ReportDefinition.ReportObjects["txtOriginalDuplicado"];
for (int i = 0; i < cantCopias; i++)
oReporte.SetParameterValue("@id_evento", idEvento);
if (i == 0)
originalDuplicado.Text = "Original";
if (i == 1)
originalDuplicado.Text = "Duplicado";
if (i==2)
originalDuplicado.Text = "Triplicado";
oReporte.PrintToPrinter(1, false, 0, 0);
I tried several things but I can not solve the problem. Could you please help me with that issue?
Edited by: frangambino on Feb 15, 2012 4:20 AMHi,
Take a look at below threads where this issue is discussed,
[http://forums.sdn.sap.com/thread.jspa?threadID=2011850|http://forums.sdn.sap.com/thread.jspa?threadID=2011850]
[http://forums.sdn.sap.com/thread.jspa?threadID=1975259|http://forums.sdn.sap.com/thread.jspa?threadID=1975259]
[http://forums.sdn.sap.com/thread.jspa?threadID=2031409|http://forums.sdn.sap.com/thread.jspa?threadID=2031409]\
Also, is it a 64 bit machine? check the target platform of the application and set it accordingly.
Few things to try
- Check if the reports exist and are accessible by the application (permissions, filepath,)
- Do not publish the report using the publish option, just as a test copy them manually.
See if this helps,
- Bhushan. -
Mcxd.app reports errors in system.log
Hello!
On every startup of my mac os x server I get the following entries in system.log from mcxd.app.
Oct 9 20:34:45 sebastian /System/Library/CoreServices/mcxd.app/Contents/MacOS/mcxd: DSGetLocallyHostedNodeNames(): dsFindDirNode() == -14008
Oct 9 20:34:45 sebastian /System/Library/CoreServices/mcxd.app/Contents/MacOS/mcxd: DSGetSearchPath(): DSGetLocallyHostedNodeNames() == -14956
Oct 9 20:34:45 sebastian /System/Library/CoreServices/mcxd.app/Contents/MacOS/mcxd: DSGetCurrentConfigInfo(): DSGetSearchPath() == -14956
Oct 9 20:34:45 sebastian /System/Library/CoreServices/mcxd.app/Contents/MacOS/mcxd: DSGetCacheInfo(): DSGetCurrentConfigInfo() == -14956
Oct 9 20:34:45 sebastian /System/Library/CoreServices/mcxd.app/Contents/MacOS/mcxd: * MCXD.getComputerInfo: Couldn't get cache info -14956
How can I get rid off them? Any hints?
Thanx in advance
GerhardNigel,
While the error messages you are seeing might not be anything to worry about (you will see some of these even in the best of circumstances, but I cannot speak to yours, specifically), you shouldn't be seeing any "wonky" behavior. The fact that you are indicates that something might, indeed, be wrong.
My best advice to you would be to start with a clean slate. I just received a new machine, myself (this beautiful new 17" Powerbook), and I spent the past day doing just that: starting "clean."
What I mean by this is formatting the drive right out of the box, then reinstalling. And, not just any format, but a "zeroing" of the entire drive. This took about 45 minutes on my PB, but the process will "map out"any potential bad blocks on the drive, thereby reducing the possibility of encountering disk errors for the near future. Another good reason to reinstall yourself, even if you don't "zero" the drive, is that Apple often ends up installing the wrong version of an OS to a given machine, especially if that machine has just been released. We see many cases where a user will find, by reinstalling from the disks that come with new Mac models, that the OS is slightly different than the one that was originally installed, and that the disk-installed version works without problems. Hmmm.
Unless and until you do this yourself, you will not have a firm foundation from which to troubleshoot any problems you might be having. If, after having done this, you find that you still have problems, the next thing to look for is a bad RAM module. If you rule out a bad RAM module, only then should you consider the possibility that something is wrong with the machine, itself.
Scott -
OK, so I'm relatively new to Mac OS X, but that's on the back of some 20 years of working with UNIX, so I'm well placed to handle Mac OS X.... or so I thought!
In fact, compared to generic UNIX systems, there's so much added to Mac OS X that it might as well be a totally different system.
Anyway, I've got this iMac G5 (iSight) 2.1 GHz, which came with 10.4.2 installed, and which I've fully updated (using Software Update) to 10.4.3. After the update, a few glitches have revealed themselves - like the Dock will sometimes just apparently lock up - clicking back on the desktop seems to be a fairly reliable way of unfeezing the Dock, but it's annoying nonetheless.
The glitches prompted me to look further into the system, and in particular, when I look at the system log, via Console, right after rebooting, I see some messages there that may or may not be of significance:
- SystemStarter[879]: authentication service (887) did not complete successfully
- localhost kernel[0]: AppleU3: WARNING: platform-chip-fault expected, but not found
- launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[65]: exited abnormally: Hangup
I must admit, the second of those seems a bit odd to me!
But, can anyone tell me how 'bad' these errors are? Do I need to delve further into their causes, or do Aqua and Darwin handle such 'events' quite gracefully (which I'll accept is more than possible)?
Whilst I was talking with one of the AppleCare guys earlier today, I tried to ask him about these syslog messages, but the response I got was that I should consult http://www.apple.com/support/mac101 !!! Right, very helpful!
AppleCare is great, I think, for users who simply need a bit of hand-holding and instruction in how to use their Mac. That's fine, as long as everything is working as it should - but when we're more advanced as users than that, and we have a more technical issue to resolve, whereand how are we supposed to get help from even more knowledgable support personnel?
Or are these discussion forums the best bet?
NigelNigel,
While the error messages you are seeing might not be anything to worry about (you will see some of these even in the best of circumstances, but I cannot speak to yours, specifically), you shouldn't be seeing any "wonky" behavior. The fact that you are indicates that something might, indeed, be wrong.
My best advice to you would be to start with a clean slate. I just received a new machine, myself (this beautiful new 17" Powerbook), and I spent the past day doing just that: starting "clean."
What I mean by this is formatting the drive right out of the box, then reinstalling. And, not just any format, but a "zeroing" of the entire drive. This took about 45 minutes on my PB, but the process will "map out"any potential bad blocks on the drive, thereby reducing the possibility of encountering disk errors for the near future. Another good reason to reinstall yourself, even if you don't "zero" the drive, is that Apple often ends up installing the wrong version of an OS to a given machine, especially if that machine has just been released. We see many cases where a user will find, by reinstalling from the disks that come with new Mac models, that the OS is slightly different than the one that was originally installed, and that the disk-installed version works without problems. Hmmm.
Unless and until you do this yourself, you will not have a firm foundation from which to troubleshoot any problems you might be having. If, after having done this, you find that you still have problems, the next thing to look for is a bad RAM module. If you rule out a bad RAM module, only then should you consider the possibility that something is wrong with the machine, itself.
Scott -
Errors in system.log since leopard upgrade
I have a mac mini core duo 1.83, with 2gb ram.
It was running Tiger until I upgraded it to Leopard about October 27th.
I used the archive and install installation method.
It has been running fine. The only "glitch" I have noticed is a very occasional
pause in music playing in iTunes.
While investigating the cause of that, I realised that the system.log file is very large, and there are many many instances of this error in it.
Dec 10 15:42:11 macmini Unknown[36394]: Error loading /System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/IOUSBLib.bundle/Co ntents/MacOS/IOUSBLib: dlopen(/System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/IOUSBLib.bu ndle/Contents/MacOS/IOUSBLib, 262): no suitable image found. Did find:\n /System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/IOUSBLib.bundle/Co ntents/MacOS/IOUSBLib: mach-o, but wrong architecture
Dec 10 15:42:11 macmini Unknown[36394]: Cannot find function pointer IOUSBLibFactory for factory 4547A8AA-9EF3-11D4-A9BD-000A27052861 in CFBundle/CFPlugIn 0x262580 </System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/IOUSBLib.bundle> (bundle, not loaded)
The latest log file is over 500mb
-rw-r----- 1 root admin 607343865 Dec 10 15:49 system.log
Also I see these errors
Dec 10 15:50:01 macmini com.apple.launchd[1] (org.postfix.master): Throttling respawn: Will start in 9 seconds
Dec 10 15:50:10 macmini postfix/master[67855]: fatal: open lock file pid/master.pid: unable to set exclusive lock: Resource temporarily unavailable
Dec 10 15:50:11 macmini com.apple.launchd[1] (org.postfix.master[67855]): Exited with exit code: 1
Dec 10 15:50:11 macmini com.apple.launchd[1] (org.postfix.master): Throttling respawn: Will start in 9 seconds
Am I likely to see any problems other than the large log files?Large log files are potential problems. The larger they get the greater the probability they will become corrupted. You should use some software to clear out the logs regularly by running the built-in Unix scripts. See my maintenance FAQ for helpful suggestions:
Kappy's Personal Suggestions for OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.0 is now Intel Mac compatible. TechTool Pro provides additional repair options including file repair and recovery, system diagnostics, and disk defragmentation. TechTool Pro 4.5.2 is Intel Mac compatible; Drive Genius is similar to TechTool Pro in terms of the various repair services provided. The current version, 1.5.1, is Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep.
OS X automatically defrags files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems.
I would also recommend downloading the shareware utility TinkerTool System that you can use for periodic maintenance such as removing old logfiles and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the commandline.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Retrospect Desktop (Commercial - not yet universal binary)
2. Synchronize! Pro X (Commercial)
3. Synk (Backup, Standard, or Pro)
4. Deja Vu (Shareware)
5. PsynchX 2.1.1 and RsyncX 2.1 (Freeware)
6. Carbon Copy Cloner (Freeware - 3.0 is a Universal Binary)
7. SuperDuper! (Commercial)
The following utilities can also be used for backup, but cannot create bootable clones:
1. Backup (requires a .Mac account with Apple both to get the software and to use it.)
2. Toast
3. Impression
4. arRSync
Apple's Backup is a full backup tool capable of also backing up across multiple media such as CD/DVD. However, it cannot create bootable backups. It is primarily an "archiving" utility as are the other two.
Impression and Toast are disk image based backups, only. Particularly useful if you need to backup to CD/DVD across multiple media.
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac Maintenance Quick Assist.
Referenced software can be found at www.versiontracker.com and www.macupdate.com.
I'm only supposing, here, but I think your log errors are generated by left over elements of Tiger not removed when you installed Leopard. This is always a potential problem with upgrade installs and Archive and Install when moving to a new major OS version. I generally recommend doing an Erase and Install. -
Netinfod errors in system.log
These errors appear in my system.log every 30 minutes:
Jan 8 09:18:03 bd netinfod local[54]: notify's udp binder connection to localhost[255.255.255.255]/local failed during opening (UDP) - socket_open failed
Jan 8 09:18:03 bd netinfod local[54]: notify's tcp binder connection to localhost[255.255.255.255]/local failed during opening (TCP) - socket_connect failed
Jan 8 09:18:03 bd netinfod local[54]: update 0 to localhost[255.255.255.255]/local failed during binder contacting - couldn't getregister
Anyway to fix them?
...ReneNigel,
While the error messages you are seeing might not be anything to worry about (you will see some of these even in the best of circumstances, but I cannot speak to yours, specifically), you shouldn't be seeing any "wonky" behavior. The fact that you are indicates that something might, indeed, be wrong.
My best advice to you would be to start with a clean slate. I just received a new machine, myself (this beautiful new 17" Powerbook), and I spent the past day doing just that: starting "clean."
What I mean by this is formatting the drive right out of the box, then reinstalling. And, not just any format, but a "zeroing" of the entire drive. This took about 45 minutes on my PB, but the process will "map out"any potential bad blocks on the drive, thereby reducing the possibility of encountering disk errors for the near future. Another good reason to reinstall yourself, even if you don't "zero" the drive, is that Apple often ends up installing the wrong version of an OS to a given machine, especially if that machine has just been released. We see many cases where a user will find, by reinstalling from the disks that come with new Mac models, that the OS is slightly different than the one that was originally installed, and that the disk-installed version works without problems. Hmmm.
Unless and until you do this yourself, you will not have a firm foundation from which to troubleshoot any problems you might be having. If, after having done this, you find that you still have problems, the next thing to look for is a bad RAM module. If you rule out a bad RAM module, only then should you consider the possibility that something is wrong with the machine, itself.
Scott -
Error while viewing log in the portal
Hi,
When i try to access the log files in the portal, i get this error.
Portal Runtime Error
An exception occurred while processing a request for :
iView : com.sap.portal.logviewer620.logviewer
Component Name : com.sap.portal.logviewer620.logviewer
The exception was logged. Inform your system administrator..
Exception id: 04:31_12/05/06_0030_4049850
See the details for the exception ID in the log file
Any clues as what the problem must be. Please do let me know.
Regards,
AkashHi James,
This component is not available in EP7. To view the logs use the url http://<host>:<port>/nwa > Monitoring.
Cheers!! -
Httpd spewing errors into system.log...
Hi,
I just noticed that httpd is having problems in Mountain Lion...
Jul 26 15:09:40 eagle com.apple.launchd[1] (org.apache.httpd[4576]): Exited with code: 1
Jul 26 15:09:40 eagle com.apple.launchd[1] (org.apache.httpd): Throttling respawn: Will start in 10 seconds
Jul 26 15:09:50 eagle com.apple.launchd[1] (org.apache.httpd[4577]): Exited with code: 1
Jul 26 15:09:50 eagle com.apple.launchd[1] (org.apache.httpd): Throttling respawn: Will start in 10 seconds
The system.log file is growing ;(
I am having the same problem on another machine but in addition it is continuously removing a certificate.
Nothing is appearing in the Apache logs....
Any suggestions?
JerryHey. Thanks for the advice thus far but I have the same problem on 10.9 with no resolution... the above solutions don't apply. (No funny apple stuff in apache conf, no permissions problems, logfiles exist, writable, working... and most odd of all... apache is in fact running and working.)
I just don't like the errors in the console... it disturbs me. Any other ideas? TIA.
2014/09/15 7:31:10,462 PM com.apple.launchd[1]: (org.apache.httpd[74008]) Exited with code: 1
2014/09/15 7:31:10,462 PM com.apple.launchd[1]: (org.apache.httpd) Throttling respawn: Will start in 9 seconds
2014/09/15 7:31:15,828 PM 1PasswordAgent[430]: Failed to return databaseID, encryption key is not loaded
2014/09/15 7:31:23,562 PM com.apple.launchd[1]: (org.apache.httpd[74009]) Exited with code: 1
2014/09/15 7:31:23,562 PM com.apple.launchd[1]: (org.apache.httpd) Throttling respawn: Will start in 6 seconds
2014/09/15 7:31:31,613 PM com.apple.launchd[1]: (org.apache.httpd[74010]) Exited with code: 1
2014/09/15 7:31:31,613 PM com.apple.launchd[1]: (org.apache.httpd) Throttling respawn: Will start in 8 seconds
2014/09/15 7:31:42,430 PM com.apple.launchd[1]: (org.apache.httpd[74011]) Exited with code: 1
2014/09/15 7:31:42,430 PM com.apple.launchd[1]: (org.apache.httpd) Throttling respawn: Will start in 8 seconds
2014/09/15 7:31:51,435 PM com.apple.launchd[1]: (org.apache.httpd[74012]) Exited with code: 1
2014/09/15 7:31:51,435 PM com.apple.launchd[1]: (org.apache.httpd) Throttling respawn: Will start in 9 seconds
2014/09/15 7:32:04,516 PM com.apple.launchd[1]: (org.apache.httpd[74014]) Exited with code: 1
2014/09/15 7:32:04,516 PM com.apple.launchd[1]: (org.apache.httpd) Throttling respawn: Will start in 6 seconds
2014/09/15 7:32:10,611 PM com.apple.launchd[1]: (org.apache.httpd[74015]) Exited with code: 1
2014/09/15 7:32:10,611 PM com.apple.launchd[1]: (org.apache.httpd) Throttling respawn: Will start in 10 seconds
2014/09/15 7:32:21,306 PM com.apple.launchd[1]: (org.apache.httpd[74017]) Exited with code: 1
2014/09/15 7:32:21,307 PM com.apple.launchd[1]: (org.apache.httpd) Throttling respawn: Will start in 10 seconds
2014/09/15 7:32:31,397 PM com.apple.launchd[1]: (org.apache.httpd[74018]) Exited with code: 1
2014/09/15 7:32:31,397 PM com.apple.launchd[1]: (org.apache.httpd) Throttling respawn: Will start in 10 seconds -
Mac Pro freezes frequently after "NVChannel" error in system.log
Hi,
Can anybody here with a 2008 Mac Pro run the Folding @ Home client without hard crashing the Mac?
I have a 2008-model Mac Pro, with the nVidia GeForce 8800 GT, which freezes frequently. As detailed in an earlier post[1], the graphics driver sees to be implicated, as just before the freezes, messages like this appear in the system log:
kernel kern 3/30/08 7:53:52 PM Debug NVChannel(GL): Graphics channel exception! status = 0xffff info32 = 0x6 = Fifo: Parse Error
kernel kern 3/30/08 7:53:52 PM Debug 0000000b
If you google for "NVChannel freeze" then you will find many many Mac owners whose machines freeze with similar symptoms. Apple recently released the "Leopard Graphics Update" which fixes such problems for some users, but not others.
In my 2008 Mac Pro's case, I have found a way to trigger the freeze 100% of the time: install the freeware Folding@Home client[2], and run the demo in the Applications folder. Just opening this app causes those messages to appear in the log, and then the Mac freezes.
I work for a software company which writes Mac software, so now that I have found a reliable way to reproduce this issue, I will be filing a bug report through Apple's bug system. But for my own sanity, I would like to collect more info, if possible.
If you have a 2008 Mac Pro and want to be cool, try running the Folding @ Home client app (link below) and post in this thread:
a.) whether or not your Mac froze
b.) what video card you have
c.) how much RAM you have
Thanks!
[1]: http://discussions.apple.com/thread.jspa?messageID=6920946�
[2]: http://folding.stanford.edu/English/DownloadYup… this is a memory fault and you should firstly try reseating the RAM and memory Risers (even change the slots they are in - depending on your configuration of course). The can often remove these issues.
Failing that, I would contact the RAM vendor and discuss it with them. Depending on how they sell things it might be simpler to send a kit, as in two DIMMs, back for replacement rather than a single DIMM that is part of a kit. Also, unless they specifically match your original DIMMs then you'd be better of returning both.
Maybe you are looking for
-
I only have a portion of songs from my itunes library selected to synch to my iphone 5 (35 songs from one artist). They have always been on my phone without issue, even after updating to the ios7. Just last night however, about half of those songs
-
Data stored by month, needs chnaging to store by day in cube.
Hello All, I am reporting on HR data. Data is stored by month in the cube. So for a given year an employee is likely to have 12 records in the cube (if there where no changes to the record). A request has come in to store data by day (so an employ
-
I just purchased a new mac mini and would like to use my old dell monitor. I tried a HD to VGA adapter converter,it plugs in, but nothing shows on the monitor. Any suggestions?
-
Key Commands corrupt using Configurator in Photoshop CS5
For me, when the Configurator Panel is open common keyboard commands for tools such as the brush or patch tool (any of them) no longer work. There is a brief pause, it switches to the tool you want, and then it reverts back to the tool you were usin
-
Nexus 1000v 4.2(1)SV2(2.1a) - License Question
I have two VSM's (vm's) running in HA pair on two blade servers in same HP chassis. In the beginning I was running the 1000v environment using the Eval licensing but now I have installed the Cisco provided license files. My question is this: When I i