ERROR IN TAIL DELTA

HI
IN THE RSA7 ALL THE DELTA OF THE TAILS HAS RED, AS I CAN PLACE IT IN GREEN.
THIS BROUGHT TO ME LIKE ERROR THAT MY LOADS WERE NOT LOADED
MIKE

It enters the part of system source (RSA1),
I give click in “verifying” to the system source,
and sends a message:
1.inactive system source
2.BW unknown in system source
how solutions this??
MMikee

Similar Messages

  • Short dump error when extracting delta records from R/3

    I am working on BW 3.5 and I am facing some short dump error when extracting delta records from the r/3 to BW.
    Below is the error message
    Kindly do the needful ASAP.
    Job started
    Step 001 started (program SBIE0001, variant &0000000024277, user ID BWREMOTE)
    Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
    DATASOURCE = 0ISCM_PAYMENT_01
             Current Values for Selected Profile Parameters               *
    abap/heap_area_nondia......... 2000000000                              *
    abap/heap_area_total.......... 2000000000                              *
    abap/heaplimit................ 40000000                                *
    zcsa/installed_languages...... DE                                      *
    zcsa/system_language.......... E                                       *
    ztta/max_memreq_MB............ 2047                                    *
    ztta/roll_area................ 6500000                                 *
    ztta/roll_extension........... 2000000000                              *
    2,454 LUWs confirmed and 2,454 LUWs to be deleted with function module RSC2_QOUT_CONFIRM_DAT
    ABAP/4 processor: MESSAGE_TYPE_X
    Job cancelled

    Hi,
    I look at the transaction ST22 to see which type of error has given you. Take a look at the notes to correct the error.
    Another option is to look at OSS notes, because the error is giving you a standard extractor.
    Greetings,

  • What does mean the error "System status DELT is active"?

    Hi Gurus,
    Can somebody tell me what does mean the error "System status DELT is active"?

    Hi Disha,
    I m getting the same message while trying to update the contract using FM "bbp_pd_ctr_update".
    When  I go and check the Item or header it is not marked for Deletion. Is there any table or field which indicates that it is marked for Deletion.
    Any help on this is highly appreciated.
    Regards
    Surender

  • %UTIL-3-DLL: Data structure error -- non-tail element contains NULL next p

    I am getting the error in my 7200 vxr router where running ios is c7200p-advipservicesk9-mz.124-15.T4.bin
    my observation is
    when tunnel interface is going down that time i am getting this error
    error is
    %UTIL-3-DLL: Data structure error -- non-tail element contains NULL next pointer, -
    Traceback= 0x140C170 0x3760FDC 0xE0E31C 0xE0EB80 0xE0B910 0x1A4C9FC 0x1A4CC44 0x1A5C378 0x168B05C 0x2D9298 0x1A3E854 0x1A3F110 0x2930240 0x2E5850 0x2905A30 0x2905F08

    It does not say much !
    The following are utility messages.
    Message
    %UTIL-3-DLL : Data structure error -- [chars]
    Explanation A software error occurred, resulting in a data structure inconsistency.
    Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at
    http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Also perform a search of the Bug Toolkit
    http://www.cisco.com/pcgi-bin/Support/Bugtool/home.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet
    http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the gathered information.

  • %UTIL-3-DLL: Data structure error -- non-tail element contains NULL next po

    I am getting the error in my 7200 vxr router where running ios is c7200p-advipservicesk9-mz.124-15.T4.bin
    error is
    %UTIL-3-DLL: Data structure error -- non-tail element contains NULL next pointer, -
    Traceback= 0x140C170 0x3760FDC 0xE0E31C 0xE0EB80 0xE0B910 0x1A4C9FC 0x1A4CC44 0x1A5C378 0x168B05C 0x2D9298 0x1A3E854 0x1A3F110 0x2930240 0x2E5850 0x2905A30 0x2905F08
    Please help me out from this problem

    Error message decoder results:
    1. %UTIL-3-DLL: Data structure error -- %s A software error occurred, resulting in data structure inconsistency.
    Recommended Action: Copy the message exactly as it appears on the console or in the system log.  Research and attempt to resolve the issue using the tools and utilities provided at  http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying  information. Search for resolved software issues using the Bug Toolkit at  https://tools.cisco.com/bugsearch/?referring_site=emd. If you still require assistance,  open a case with the Technical Assistance Center via the Internet at  https://tools.cisco.com/ServiceRequestTool/scm/mgmt/case, or contact your Cisco technical support  representative and provide the representative with the information you have gathered. Attach the  following information to your case in nonzipped, plain-text (.txt) format: the output of the show  logging and show tech-support commands and your pertinent troubleshooting logs.
    Related documents- No specific documents apply to this error message.

  • Error when loading delta update from DSO to cube

    hi Experts,
    I am loading a delta DTP, get dat by requests from an dso to a cube, while doing that encounter an error :
    "Exception CX_RS_ERROR occurred (program: CL_RSTRAN_RUNTIME_EXE=========CP,
    include: CL_RSTRAN_RUNTIME_EXE=========CM001, line: 210).                 "
    Any pointers ?
    Thanks.
    Sharat.

    Hi Sharat,
    We are getting the following error while loading data form DSO into InofCube.
    Exception CX_RS_ERROR occurred (program: CL_RSTRAN_RUNTIME_EXE=========CP, include: CL_RSTRAN_RUNTIME_EXE=========CM001, line: 231).
    Message no. RS_EXCEPTION000
    Please help us in resolving this.
    Thanks,
    Shalin

  • Error while doing DELTA Extraction

    Hi BW Experts,
    In my R/3, I have a generic data source ZBUT_VW.
    It receives data from a View which is created based on couple tables.
    When I do full load to the corresponding ODS, it is successful.
    But after that I delete the ODS and created CUBE with DELTA
    I have Initialized delta.
    When I do DELTA extraction, it fails.
    The error
    “The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
    and/or
    the maximum wait time for this request has not yet run out
    and/or
    the batch job in the source system has not yet ended.”
    I delete the initialization load and trying to do DELTA extraction again and it Fails With the same error
    Please let me know how can I resolve this problem.
    URGENT
    gaurav

    I dont think it is possible to have to additive delta with creation date.
    Try a full load to cube to check if the extractor is working.

  • Error while doing DELTA Extraction (generic data source)

    Hi BW Experts,
    In my R/3, I have a generic data source ZBUT_VW.
    It receives data from a View which is created based on couple tables.
    When I do full load to the corresponding ODS, it is successful.
    But after that I delete the ODS and created CUBE with DELTA
    I have Initialized delta.
    When I do DELTA extraction, it fails.
    The error “The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
    and/or
    the maximum wait time for this request has not yet run out
    and/or
    the batch job in the source system has not yet ended.”
    I delete the initialization load and trying to do DELTA extraction again and it Fails.
    With the same error
    Please let me know how can I resolve this problem.
    URGENT
    gaurav

    I dont think it is possible to have to additive delta with creation date.
    Try a full load to cube to check if the extractor is working.

  • Error while loading Delta

    Hi,
    I have loaded in process chain a ODS in Delta, the load was not successfull it went in error stating that : "The last delta load is still running; no new request possible" and so i deleted the request from manage. But still its showing the same information when i open the infopackage.
    wat can be done to load the data in Initialize Delta Process.
    Regards,
    Poomagal.

    Hi Poomagal,
    This is due to mismatch in the Delta Queue.
    u might have missed a delta before this request which has failed. Its stating that "The last delta load is still running; no new request possible". This means that there is a previous request which has not loaded in the target.
    Just check in PSA or in DataSource Manage tab whether there is request which has not been loaded in the target.
    If u find any request then load that request first and then repeat the failed request.
    U need to make the QM Status manually red even if its red in RSMO as well as in Manage tab of the target before deleting the request from the target. and then when u start the info package  it will give a pop up as Repeat of last delta again. If it doesnot give then it wont bring the delta load which has failed.
    Thanks,
    Nagesh.

  • Error while enabling Delta on HCM_Stageing_Area

    Hi,
    I'm reading an Import File and trying to enable delta. Unfortunately it fails with following error messages:
    Error inserting entry in delta. DN:
    java.sql.SQLException: ORA-01400: cannot insert NULL into ("MXMC_OPER"."LOGENTRIES"."DN")
    And:
    Error selecting record in delta. SQL:SELECT operation, entid, changejob FROM logentries WHERE dn=? AND ownerid=? DN:
    IdM is running on Windows 2008 R2 and its database on Oracle 10.2.
    On Win2k3 and MSSQL it is running smoothly.
    Any idea will be helpful.
    Thanks
    Christos

    Hi Christos,
    have you checked the connection strings within the identity Center?
    It's just a guess, but it seems that the password of the mxmc_oper-user is missing.
    Kind regards,
    achim

  • Error while implementing Delta Load

    Hello Experts,
    I need your help.
    I am trying to extract data from SAP R/3 to BI system.
    The R/3 system contains data from 1999-2008 fiscal year. I extracted data for fiscal yr 2007,2006 and 2005 successfully and created a delta info package
    In the delta info package I didn't specify any fiscal year limit under the Data selection tab.
    I started a background job which needs to run daily. Now my issue is the load came up with an error stating time limit exceeded. I believe the number of data packets exceeded. The request showed a warning sign and it got stuck there. I tried to delete that request and consequently delete the whole delta info package and creating a delta package freshly.
    But when I tried to start the process of extraction, the following message popped up. Please tell me what I need to next.
    Init. select. for field name  currently running in request REQU_464F7XQP5TZIEJPIS0MUV32IB
    Message no. RSM1070
    Diagnosis
    Init. selection for field name  with the 'From value'  and the 'To-value' , is currently running in request REQU_464F7XQP5TZIEJPIS0MUV32IB.
    Procedure
    Wait until the init. selection is completed; check the load status in the Monitor.
    Thank you. Appreciate your help.
    Raj

    Hello guys,
    I tried to delete the delta request by right clicking on the infopack and hitting manage, and then selecting the particular request and hitting delete.
    But when I tried to create a new infopack and initialize it it constantly gave me the same error saying that I need to delete the previous request.
    There is another place where you need to delete the request from.
    You need to double click on the delta infopackage and on the top menu click on
    Scheduler > Initialization options for Source System > Now select the particular delta request and delete it.
    This solves the problem and helps you to reintialize the delta load using the new delta infopackage

  • Error while doing Delta using 0FI_AA_11 ..

    Hi Experts,
    I am trying to load ODS : 0FIA_DS11 (Transactions (Delta) using standard datasource : 0FI_AA_11 (FIAA: Movements).
    When I am trying to load I am getting following error :
    " <b>Extraction of 0FI_AA_11 not possible. Extract 0ASSET_AFAB_ATTR first     BWFIAA     4"</b>
    I have already loaded 0Asset_afab, both texts and attributes and activated.
    Also I have activated : BAdi: <b>FIAA_BW_DELTA_UPDATE</b> in R/3, which SAP Help says we need to activate it.
    This error comes only when i  tryig to do Delta or Init with data trsnfer.Init without data transfer and full load works fine.Also RSA3 shows record.
    Any Help wud b appreciated and rewarded by points!!
    Thanks!!
    Sorabh

    Please load master data first that load 0ASSET_AFAB_ATTR first and some other master data and then load the ODS 0FIA_DS11.
    Hope it helps.....

  • Error while Doing Delta upload

    Hi,
      While loading the deltas in SD Module we are getting the error that 'No SID value for 0BILLTOPRTY and 0SOLD_TO'. We already run the delta for Customer.
    Even though we are able to see that record in customer, we are getting the error.
    Thanks&Regards,
    Ganga Bhavani

    Hi Bhavani,
       Try to activate the customer master data and run attribute change run for customer.
    Hope it Helps
    Srini

  • Unknown error message at delta load

    We are working with the IPC 3.0, SP17 in a stand alone version. For data loading we are using always the initial load. Since the condition data get more and more, it needs to much time for loading that with the initial load and we want to use the delta load now. When I have made the customization in the R3 system, now I have the problem that I get always the following error messages:
    java.lang.Exception: A901 is not existing in global scheme. (A901 is a customer condition table, but for SAP tables I get the error message, too)
    java.lang.Exception: Specified source/destination Type doesn't exist in Scheme
    I do not found any documentation about this error messages.
    Can someone help me ?

    It's an error in some third-party software you installed, possibly called "Remote Advisor."

  • Error while init delta in source system

    I use generic data source with generic delta
    Delta field - DATUM (Calendar date)
    Safety Interval Upper Limit = 1
    Delta type = "New Status for Changed Records"
    My underline table for data source has 53 records. All records DATUM field value is 2010/09/27.
    I'm trying to do Init load today (2010/09/28) and getting no data with error message:
    "Data in queue of DataSource Z_PU_IS_PS_98 has been deleted"
    Why???? If we count "Safety interval upper limit 1"  we'll get  2010/09/28 - 1 = 2010/09/27, so all records in table MUST BE catched by Init!
    The data queue for the data source in RSA7 contains "    -  - "  that is an empty value.
    My question Why I can't init data source thou

    now look that sap.help says http://help.sap.com/saphelp_nw04//helpdata/en/37/4f3ca8b672a34082ab3085d3c22145/content.htm :
    +
    Safety Interval Upper Limit
    The delta-relevant field is a timestamp.
    The timestamp that was read last is 12:00:00. Delta extraction begins at 12:30:00. The safety interval for the upper limit is 120 seconds. The safety interval for the delta request is: 12:00:00 to 12:28:00. Upon completion of the extraction, the pointer is set to 12:28:00.
    Safety Interval Lower Limit
    The delta-relevant field is a timestamp. After images are transferred. In other words, the record is overwritten with the status after the change in BW, for example for master data. Any duplicate records that appear have no effect upon the BW system.
    The last changed timestamp is 12:28:00. Delta extraction begins at 13:00. The safety interval for the lower limit is 180secs. The safety interval for the delta request is: 12:25:00 to 13:00:00. Upon completion of the extraction, the pointer is set to 13:00:00.
    +
    If i'll use LOWER LIMIT I'll get 2010/09/29!

Maybe you are looking for