Error in target system !!!

Hello,
I have the same error in Dev, Quality and production (wich are in different machines) with XI 2.0 To R/3 4.7, we send tRFC to IDOC and all messages are " error in target system" in sm58
in sxmb_moni, for a message, the first flag is OK, the second flag (A. Status) is red.
When we check the RFC Connection in sm59, it's sometimes good, sometimes not, we think it's a network problem (maybe with firewall...)
have someone any idea please ?
Cedric Rousseau

Hi Manish,
If so, can you control the number of idocs sending to XI box. This is workaround
Is this may be because of number of work process . I am not sure here. So you can increase the work process.
But you can seek help from SAP to audit on this provided if you are able to reproduce the error..
This is just my views~
Regards,
moorthy

Similar Messages

Error in target system : iDOC -XI-iDOC

We are getting this error in smq2 when we are processing bulk idocs thru XI "Error in target system " . The setting on receiving system is trigger by background program .
Manish

Hi Manish,
If so, can you control the number of idocs sending to XI box. This is workaround
Is this may be because of number of work process . I am not sure here. So you can increase the work process.
But you can seek help from SAP to audit on this provided if you are able to reproduce the error..
This is just my views~
Regards,
moorthy

CHARM error - No Target system for Normal transport generated from another client

Hi Gurus,
This is regarding normal change. We have two clients in development. (Workbench and Customizing)
We were trying to do Automatic import from development client to Quality. When importing the job, I’m getting an error related to Project Status switch. "you cannot import any request for the project at the moment" It works fine for another development client and we can see the target system in Project status switch.
But, checking the Project Status switch, looks like there’s no Target System defined for Normal transport generated from another client of development.
I attached some screenshots related to this.
Can you please help how to add a target system for another client of development ?
Regards,
Salman

yes, client 110 is present in the task list of the project. yes route is defined because it is working for urgent change

Inbound Proxy Error in Target System

Hi
My scenario ís MQ>XI>SAp R/3. I am successfully able to pick file from MQ and I see the success flag in SXMB_MONI(XI) and XI sends to SAP R/3 via Inbound proxy.
But on recieving system (R/3) via proxy the data is not recieved correctly.
I see Failure message with error in R/3 SXMB_MONI and the error is as follows.
I guess my Mapping is correct as it passes trhough XI successfully. Is something wrong with the Inbound proxy?
Kindly let me know your views on the same going through the error message I am unable to interpret anything. As the date format which I am recieving is correct.
++
Best Regards
Swetank

Hi,
When u define ur Data type (Messageinterface) dataelement as xsd:Date it is of the format CCYY-MM-DD. (ex 2003-12-31). So yyyyMMdd is not compatable with the ABAP data type that has been generated at the proxy end.
Make sure dats-8 and xsd:Date use the same Date format.This might be the error that i can see.
xsd:date format
http://help.sap.com/saphelp_nw04/helpdata/en/fe/26da4105aa3f5de10000000a1550b0/content.htm
Hope this helps
Cheers,
Siva Maranani.

Workflow Event Trace:RFC Status : Error in target syst

Hi Gurus,
I am working on a custom workflow which is called in a loop from a transaction. There is a transaction which creates multiple documents. We need to start the workflow for each of them. This works fine for around 80-85 documents. For the remaining documents workflow does not start. I am trying with 200 documents.For the remaining documents event is triggered and in event trace, i see the information that receiver started correctly.But in RFC Status it displays as 'Error in Target System'. This is definitely due to system overload. Is there something that can be done for the same. Is this number configured somewhere like how many workflows can work in parallel.

Hello,
How do you know it's due to system overload?
200 workflows should be okay, but how quickly are they created? If it's all done within one second then yes, there could be a problem. You could stretch it out programmatically or you could use the queue, as Sue suggests.
regards
Rick Bakker
hanabi technology

Error in Source System While Uploading Data from ODS to Data Target

Hi All,
Iam getting Following Error while Uploading data from ODS to Data Target
a) Error in Source System.
b)DataSource 80MKT_DS01 has to be replicated (time stamp, see long text)
Message no. R3016
Diagnosis
DataSource 80MKT_DS01 does not have the status of the source system in the Business Information Warehouse.
The time stamp in the source system is 21.06.2005 07:31:33.
The time stamp in the BW system is 27.11.2004 17:41:45.
Regards,
Chakri

This generally occurs when you change the data source or enhance the data source or the coonections to the datasoiurse are broken. To resdolve thius sort of errors just
1. Check for the coonect between the sourse & target systems
2 . Replicate the data sourcses.
3. Acivated TR,UR,& the rest of the flow But check in the source system if the structre is modified & is so do the changes in the IS , TR,UR correspondingly & the try to load .Hoppe it allows you to load .
Thanks ,
PSG

Two Errors during Unicode import into Target System

I exported our non-unicode 64-bit test NW 7.0 BW database as unicode and now I have started the import into the new unicode database on the target system. I am using the Single Code Page System Conversion to Unicode NW 7.0 SP16 and higher documentation. We are at service pack 18 with NW 7. During the Import ABAP phase the sapinst stopped with an errors. I found the following the first error in the SAP000.log - O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20090326104509
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#18 $ SAP
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Nov 18 2008 23:19:12
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe -i SAP0000.cmd -dbcodepage 4103 -l SAP0000.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DDL) ERROR: no tablespace for TABART SLEXC
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DDL) ERROR: no tablespace for TABART SLEXC
(DB) INFO: disconnected from DB
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20090326104509
The second error appears in the SAPSLEXC.LOG - O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20090326104509
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#18 $ SAP
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Nov 18 2008 23:19:12
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe -i SAPSLEXC.cmd -dbcodepage 4103 -l SAPSLEXC.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(GSI) INFO: dbname   = "BWP20090325020311                                                                                "
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "STBWP64                                                         "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "STBWP64"
(GSI) INFO: release = "5.2"
(GSI) INFO: version = "3790 Service Pack 2"
(GSI) INFO: machine = "4x AMD64 Level 15 (Mod 4 Step 8)"
(DDL) ERROR: no tablespace for TABART SLEXC
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DDL) ERROR: no tablespace for TABART SLEXC
(DB) INFO: disconnected from DB
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20090326104509
It looks like the same error but in two different logs. Has anyone seen this error before? Thanks.

I checked and the datafiles for all the tablespaces are set to autoextend up to 10gb and none have done this in the tablepaces that are close to being full. I did increase three tablespaces that were showing close to being full and that did not resolve the error. Would I need to restart the process from the beginning and adjust the dbsize.xml to make it work?

FDM data target system load error

Hi,
I am trying to Load the data from FDM11.1.1.3 to Planning11.1.1.3
I am using Essbase Adapter ES11X-G4-E,I imported data from a csv file ,it is imported success,and Export file was also successfully created,
My question : after this I am getting the error message in another window Target system laod , Error:Invalid use of null
Can you please anybody tell me what is the reasons for getting this error ?
Regards,
SV

One of the values on the Hyperion Essbase Integration Setup tab of the adapter is currently empty. Perform the following
a) Right-Click on the Essbase adpater in the workbench and choose Configure
b) Click on the Hyperion Essbase Integration Setup tab
c)Click on the Load/Check button
d) Verifiy that the List1, List2, and List3 boxes are not empty. These must have values:
List1: 0 -Load
List2: opt1
List3: opt1

OS Migration from HP Unix to AIX : Error in Installing Target System

Hello All,
I have successfully exported the database of my R3 4.7 source system which is on Oracle 9i and HP Unix.
Now I am trying to build a target system on AIX with Oracle 10g.
While Installing Central Instance, in Database parameters screen I didnt get an option for 102 as Oracle Client version but 102 option was there for Oracle server version. Hence I change the value 920 to 102 in oradbpar.xml in my Installation directory and has continued to the next step.
Now during the installation I am getting an error as :
FJS-00003 TypeError: linkTarget has no properties (in script InstallationScript_291, line 8977: ???)
Please help me out in this.
Also let me know if there is a seperate Installation master for Installing 4.7 ssystems.
Regards,
Nirmal.K

Theres absolutely no problem using oracle client 920 for 4.7 with Oracle 10g.... that said, If you are planning to upgrade the DB you cannot simply import the database into a system with 10g... You need to run the Oracle upgrade either prior or after the copy.
The Oracle upgrade guide is in SAP Marketplace.
Also, read Note 830576 - Parameter recommendations for Oracle 10g and apply required changes after the upgrade... also you need to apply the required Opatches
Regards
Juan

You are not authorized to logon to the target system (error code 1)

Dear Expert,
I met some problems that 'You are not authorized to logon to the target system (error code 1)' when I tried to do the auth. testing for RFC SM_CLNT<SID>_TRUSTED in satellite system.
Following SAP note 128447, I recreated the RFCs in SMSY in solution manager for satellite system using existing user.
It was still error ''You are not authorized to logon to the target system (error code 1)'.
In SMSY in solman, I checked the RFCs connection which I recreated using RFC wizard, they are ok(green).
I have already maintain the auth. obj S_RFCACL for user who is running this.
So, I am confused what authorization I did not maintain in user? Please help me out!
Thanks a lot!
Br,
Lucy
Edited by: lucy YANG on Mar 19, 2011 6:59 AM
Edited by: lucy YANG on Mar 19, 2011 7:01 AM

Hello Lucy,
The error is pretty clear that the calling system is not a trusted system so I don't think you should bother with an authorization trace at this time, because authorizations is not quite the issue. The calling system is NOT a trusted system, authorizations or not.
Please refer to SAP Note 128447 Trusted/Trusting systems
The error is listed there:
Authorization errors that occur when using an RFC destination for which
the 'Trusted Systems' indicator is set are documented with the following
message:
"No authorization to log on as a trusted system (Trusted RC = #)."
In this case, the trusted return code # (# = 0, 1, 2, 3) has the
following relevance:
1 The calling system is not a trusted system, or the
 security key for the system is invalid.
 Solution: Recreate the trusted system (see
 documentation).
These are the links the Note provides for the documentation:
[http://help.sap.com
/saphelp_nw04/helpdata/en/22/042671488911d189490000e829fbbd/frameset.htm
] in accordance with the documentation
[http://help.sap.com/
saphelp_nw04/helpdata/en/8b/0010519daef443ab06d38d7ade26f4/content.htm].
The Note states to recreate the Trusted system according to the Documentation (links above)
This is all in the Note. Please follow the Note to reslve this known error.
Regards,
Paul

InfoCube Error Message: Choose a change request with target system BWQ

Hi experts,
I have a problem when I want to edit an InfoCube created by other developer. The error message received is as follow:
"Choose a change request with target system BWQ".
When I click on the Documentation (F9) button, the detailed message is:
"Message no. TK511
Diagnosis
The selected change request BWDK901086 has target system .
However, the objects you edit can only be recorded in change requests with the target system BWQ.
The correct target system is determined from the package and transport layer to which the object concerned belongs.
System response
The selected change request BWDK901086 is not used to record the objects.
Procedure
Either choose a different change request or change the target system of the change request BWDK901086.
From the prompt window for change requests, you can display all requests you can use by choosing Own requests.
Alternatively, you can create a new request by choosing Create request.
For more information, see the SAP Library under BC - Basis Components -> Change and Transport System ."
Can someone helps me to solve this problem?
Thanks!

hi Fullham,
try se09/10 and find request BWDK901086 (use binocular icon) or se03. then double click that request, go to tab 'properties', hope you will see 'Target System' system there, click 'edit'/pencil icon and change it to BWQ.
you may need to change the owner (which may not authorized), ask basis help if necessary.
hope this helps

Error:Target system copy based on AS-JAVA

Hi,
While we were trying to restore NW2004S java Stack using target system copy SAPINST stopped with the following errors.
FJS-0003 refernce Error :row is not defined
FCO-00011 The Step checkForLoadType with step key.
As per note 970518 we have deleted the line, row.createdb=false from control.xml file..but it didn't work out. Can anyone help ???
Thanks
Saritha

I am experiencing this same issue, with the fix from the above note implemented. Has anyone figured out a work around for this issue?

Error: Unable to retrieve target System Data.

This error suddenly started appearing after we moved some code from Dev to Test. Not sure what changed. Does anybody has any idea? I get this error when I click on
Metadata --> Control tables.
** Begin FDM Runtime Error Log Entry [2011-10-05 06:08:03] **
ERROR:
Code............................................. -2147467259
Description......................................
At Line: 45
Procedure........................................ clsBlockProcessor.ActConnect
Component........................................ upsWBlockProcessorDM
Version.......................................... 1112
Thread........................................... 12592
IDENTIFICATION:
User............................................. admin
Computer Name.................................... NLSVEPMHFMT01
App Name......................................... BAABV
Client App....................................... WebClient
CONNECTION:
Provider......................................... ORAOLEDB.ORACLE
Data Server......................................
Database Name.................................... HFMTEST2
Trusted Connect.................................. False
Connect Status.. Connection Open
GLOBALS:
Location......................................... TANZANIA
Location ID...................................... 749
Location Seg..................................... 3
Category......................................... ACTUAL SCENARIO
Category ID...................................... 12
Period........................................... Apr - 2011
Period ID........................................ 4/30/2011
POV Local........................................ False
Language......................................... 1033
User Level....................................... 1
All Partitions................................... True
Is Auditor....................................... False
** Begin FDM Runtime Error Log Entry [2011-10-05 06:08:03] **
ERROR:
Code............................................. -2147467259
Description......................................
At Line: 45
Procedure........................................ clsBlockProcessor.DimensionList
Component........................................ upsWBlockProcessorDM
Version.......................................... 1112
Thread........................................... 12592
IDENTIFICATION:
User............................................. admin
Computer Name.................................... NLSVEPMHFMT01
App Name......................................... BAABV
Client App....................................... WebClient
CONNECTION:
Provider......................................... ORAOLEDB.ORACLE
Data Server......................................
Database Name.................................... HFMTEST2
Trusted Connect.................................. False
Connect Status.. Connection Open
GLOBALS:
Location......................................... TANZANIA
Location ID...................................... 749
Location Seg..................................... 3
Category......................................... ACTUAL SCENARIO
Category ID...................................... 12
Period........................................... Apr - 2011
Period ID........................................ 4/30/2011
POV Local........................................ False
Language......................................... 1033
User Level....................................... 1
All Partitions................................... True
Is Auditor....................................... False
** Begin FDM Runtime Error Log Entry [2011-10-05 06:08:03] **
ERROR:
Code............................................. -2147467259
Description......................................
At Line: 45
Procedure........................................ ObjScriptReturnMarshaler.GetDimensionList
IDENTIFICATION:
User............................................. admin
Computer Name.................................... NLSVEPMHFMT01
App Name......................................... BAABV
Client App....................................... WebClient
CONNECTION:
Provider......................................... ORAOLEDB.ORACLE
Data Server......................................
Database Name.................................... HFMTEST2
Trusted Connect.................................. False
Connect Status.. Connection Open
GLOBALS:
Location......................................... TANZANIA
Location ID...................................... 749
Location Seg..................................... 3
Category......................................... ACTUAL SCENARIO
Category ID...................................... 12
Period........................................... Apr - 2011
Period ID........................................ 4/30/2011
POV Local........................................ False
Language......................................... 1033
User Level....................................... 1
All Partitions................................... True
Is Auditor....................................... False

You need to register/configure the HFM Adapter on the FDM application server. The adapter needs to be configured to run under the FDM Service account. You will want to place the "AdapterComponents" folder that was extracted from the .zip file of the FM11x-G5-E adapter in the Oracle\Middlware\EPMSystem11R1\Products\FinancialDataQuality\SharedComponents directory.
A) Login to the FDM application via the workbench on the FDM application server
B) Choose File > Register Adapter and browse to the AdapterComponents\fdmFm11xG5E\ folder and select the fdmFM11xG5E.dll file and choose open
C) Expand the Target System adapters and right-click on the FM11x-G5-E adapter and choose Configure
D) Populate the Com Admin screen with the FDM Service account userid/password/confirm password/domain and click OK

Transporting Process Chains-includes the ERROR DTPs in the Target System

Hello Gurus,
Iam facing an issue in version NW2004s while transporting the Process Chains from DEV to QA. The Process Chains in the Target system are including the ERROR Dtps as parallel loads along with the regular DTP.This happens when there exists an ERROR DTP in the Target system at the time of Transport.
This will cause a problem
1.these would run parallel to the regular DTPs.
2.no of back ground processes running at any point will be beyond our limit.
Let me know if you have faced the same issue and how you resolved it.
Thanks
Jagadish

Hi DPN,
Check oout this thread. This might solve yuor problem.
Errors in Transportation
Thanks and Regards
Subray Hegde

You are not authorized to logon to the target system error code1(in SM58)

Hi Basis Gurus,
In my test system Idocs are in error status.
When I check tRFC monitering in SM58, there are several Idocs are strucked.
Status Text: You are not authorized to logon to the target system (error code 1).
Recently we have refreshed our test system with production data.
Before system refresh it was normal.
The RFC connection is also working fine.
Please suggest the solution as I'm struck in this issue.
I'm a Basis Guy.
Thanks & Regards,
Ravi.

Hi,
Change the RFC user password in target system however there are 2 tests to analyse from SM59 :
1) RFC Connection test
2) Authorization Test
And i guess you have only tested the 1st one from the RFC(SM59) check whether you can succeed with option 2 if not then you may need to change the password.
Thanks,
Salim

Error in target system !!!

Similar Messages

Maybe you are looking for