Error in tcode: KOK3
Hi gurus,
im getting the following error in the tcode KOK3 (Collective Disp. Internal Orders , part of FI/CO package, KAUF), after applying the new support pack. Error is as follows:
System error: Error in routine T021Q_SON_LESEN SAPMKAUFORC 0
Message no. F4308
Diagnosis
An internal error has occurred.
System Response
Processing cannot be continued.
Procedure
Contact SAP to clarify whether the error can be corrected by a program adjustment or by changes in the parameters.
In order to clarify the error situation, specify the routine T021Q_SON_LESEN in which the error occurred, as well as any other parameters (if specified in the message) which could refer to a key which does not exist.
It tried to find the routine T021Q_SON_LESEN (may be due to its inactivation), but was unable to do find that.
Pl reply.
Thanx,
Naveen Vishal
It was resolved due to support pack.
Similar Messages
-
Hi gurus,
im getting the following error in the tcode KOK3 (Collective Disp. Internal Orders , part of FI/CO package, KAUF), after applying the new support pack. Error is as follows:
System error: Error in routine T021Q_SON_LESEN SAPMKAUFORC 0
Message no. F4308
Diagnosis
An internal error has occurred.
System Response
Processing cannot be continued.
Procedure
Contact SAP to clarify whether the error can be corrected by a program adjustment or by changes in the parameters.
In order to clarify the error situation, specify the routine T021Q_SON_LESEN in which the error occurred, as well as any other parameters (if specified in the message) which could refer to a key which does not exist.
It tried to find the routine T021Q_SON_LESEN (may be due to its inactivation), but was unable to do find that.
Pl reply.
Thanx,
Naveen VishalIt was resolved due to support pack.
-
hey guys i m tryin to create a server proxy but getting a runtime error in tcode sproxy GETWA_NOT_ASSIGNED.
any idea where is the problem?
thanx
ahmadAhmad,
Check this thread where your issues is discussed very clearly:
Is There....
---Satish -
Error in TCode iview Select a line or position the Cursor correctly
Hi All,
I am getting the below error while selecting the row in Tcode iview
Select a line or position the Cursor correctly.
You have not selected a delivery or a delivery item for processing and the cursor is not positioned on a valid line, even after i am
selecting the Delivery and click on the execute button
My system config :
NW04s SP 20
Thanks&Regards
MurthyHi Murthy,
Create the Iview again.Hope the issue will resolve.
Thanks,
Arun -
hi,
i have some issue regarding FI area.
when i use tcode fk01 for creating vendor master data .
system shows rumtime error .
i attached snapshots related to this error .
pls help me out from this problem.
rgds,
Meenakshi ChitrodeThe "deep" data are the dynamic data objects - strings, internal tables and boxed components as well as data and object reference variables. Could it be that some structure that is part of WPLFA1 has been enhanced with a deep component on your system?
I'm not 100% sure what and where the problem is... let's try to isolate it.
Are there any customer append structures added directly to WPLFA1? Is there any other structure besides LFA1 "included" directly in WPLFA1, in other words?
Does the check on LFA1 show errors as well? Then we have to work down from LFA1...
cheers
Janis
Message was edited by: Jānis B -
Hi,
I excute Tcode AJAB to close Fiscal year of 2008 for FI-AA but i get this error :
" Depreciation Area number 31 is already closed for Fiscal year 2008 "
Please how to solve this ?
Regards.Hi,
is the message number AC 424?
Then the source of the problem seems to be an incorrect closed fiscal year (T093B-ABGJA) in table T093B.
In case the above is correct my proposal would be either to use OAAR as stated before, or if OAAR is not possible to update the database T093B temporary to change the last closed fiscal year directly.
Regards,
Markus -
Error in tcode: crmc_r3_org_generate
Hello sap gurus,
I am getting an error message in Tcode :crmc_r3_org_generate,when i am trying to generate R3 org structure to CRM system.
So Could please say me that where can i find the error which is associated with it.
Is there anything where i need to configure?
Thanks and regards,
Divya.Hi sapgipsy!
Check the Note 437477 - Initial download Customizing organizational data R/3 --> CRM
Regards, Kostya -
Run time error In TCODE FAGLL03
Hi Expert,
when I execute the code FAGLL03 with these single input ( GL Account, Company Code, Profit center ). after 20 and 25 mintue it went into run time error. What is the error in run time analysis is below mention.
Program Name: SAPLFAGL_ITEMS_SELECT
Trigger Location of run time error.
program: SAPLFAGL_ITMES_SELECT
Include: LFAGL_ITMES_SELECTU07
row: 329
Module Type : (FUNCTION)
Module Name: FAGL_GET_ITMES_BSAS
DESCRIBE TABLE < it_itab_data> LINES LD_FAGLPOSE_LINES.
if LD_FAGLPOSE_LINES gt 0.
perform complete_data changing
lT_FAGLPOSE[].
APPEND LINES OF lT_FAGLPOSE TO C_T_FAGLPOSE.
ENDIF.
ELSE
ASSIGN: lr_tab_data->* to <lr_tab_data>
lr_struc_data ->* to <ls_struc_data>
refresh <lt_tab_data>
328 line
=== FETCH NEXT CURSOR I_CURSOR
APPENDING CORRESPONDING FIELDS OF TABLE <lt_tab_data>
PACKAGE SIGE id_MAXIMUM_LINES
DELTA_DBCNT = SY-DBCNT - OLD_DBCNT.
OLD_DBCNT = SY-DBCNT.
DESCRIBE TABLE < it_itab_data> LINES LD_FAGLPOSE_LINES.
if LINES LD_FAGLPOSE_LINES gt 0.
if i_read _bseg is initial.
perform convert _data using
<lt_tab_data>
Ir_struc_flexa
Ir_struc_table1
lr_struc_data
lr_tab_data
changing
lt_FAGLPOSE[].
refresh <lt_tab_data> " 987950
please tell me hoe can i resolve this problem so that when we run this tcode it will not go in run time error.
Thanks.
Edited by: Rob Burbank on Jul 19, 2010 2:54 PMHi Eric,
Since the runtime is caused by a time-out, did you investigate if the following notes is applicable?
[Note 1135916 - Line items: Help for analysis for long runtime|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1135916]
This note outlines on how to analyze this transaction and its course of action.
Kind regards,
Robert -
Hi
I am getting an error while running Tcode FNFR.
Number range object <Company Name> <Object>: Interval not found
I tried to increase the intervals.
Please suggest.
ThanksI think Jeremy's suggestions are good. I just wanted to add that as the message says the interval is not found, if we take this at face value then there should be a missing interval for the number range object. If you go to SNRO and enter the object in the message you will be able to check the intervals. I'm not familiar with this transaction but some objects have differnt intervals for periods such financial year, if this is a very intermittent activity it could be that no one has created the new interval for the new period.
-
Hi,
When I execute Tcode PRFI, I get the following error 'Number range object HRTR_PDOC : Interval not found'. When I check in th eTcode SNUM for the number range object, I find it there.
What could be the probable reason for this error?
Please help.
Thanks in Advance.
Regards
JaspreetHi,
create Travel no ranges as per path
financial accounting new> travel management>set up trip number ranges.
Regards
Devi -
Error Running tcode RSMDCNVEXIT
Hi All, While running tcode RSRV in BW stage(upgraded to 7.0) to check consistency of infoobject 0RT_SEAYR, I got inconsistency error:
"There are 1 values with the wrong internal format in the SID table"
when I run <b>RSMDCNVEXIT</b> to Convert Inconsistent Internal Characteristic Values. I get the below <b>error</b>.
<b>Data conversion functions are no longer supported</b>
Both Dev & Stage BW environments have this error. BW producion which is on 3.5 doesn't have this error.
Kindly help
PKI went back and reviewed the doc on RSMDCNVEXIT as I have been struggling with trying to cleanup our MD before we convert to 7.0.
The Help for RSMDCNVEXIT says something to the effect that with 3.0, the BW's consistency checks are strict enough that you should have inconsistencies any more. But there are different things that can still cause MD inconsistencies, such as MD load failures, or a new Note that indicates running MD reorgs can cause problems ( <b>Note 1071894 - Master data inconsistent after master data re-organization</b> recommends not running any MD reorgs until they fix the bug).
For inconsistencies that can not be corrected via RSRV my only suggestion is to try to the Delete Master Data. Maybe the inconsistency is for a value that is not in any transactions. If nothing else a review of the MD Delete log in SLG1 should tell you what the first (and hopefully only) InfoProvider is that it found the SID in question. From there, perhaps you could perform a Selective Deletion and then reload that transaction witha good SID value. Maybe you just live with inconsistency if it won't effect user's queries.
Might be a good question to open a Customer Message with SAP about. What do they recommend to correct a MD inconsistency. I'd like to see SAP's response. -
Hi,
We are using OHTs with destination type file.
We have created a logical path.when we are trying to assign this logical path to the file,we are getting a dump.
Runti.e Errors ASSI6N_SUBSTRIN6-N0L.ALL0WED
Date and T1ne 06/1i812009 22:56-:350
Short text
ASSI6N to a substring not allowed.
What happened?
Error in the A8AP Applicat1on Program
The current ABAP progran SAPLOSFNu201D had to be terminated because it has
cone across a statenent that unfortunately cannot be executed.
Error analysis
A field symbol should have been set to a substring.
However, this is not alliowed..
Maybe a substring was intended to be used 1n a paraneter transfer
This Is not possible, either.
Trigger Location of Runtine Error
Progran SAPLOsFN
Include LOSFNIO1
Row 223
Module type (M0DuLE PAI)ASSIGN_SUBSTRING_NOT_ALLOWED
Please help with this.
Thanks,GirishPlease apply the SAP Note 1297989 and it will fix the issue.
Thanks. -
Error in TCode S_ALR_87013431 "Confirmation Using Operation List" selection
Hello Experts,
I think I have encountered an error in the functionality of the S_ALR_87013431 "Confirmation Using Operation List" in ECC 6.0.
When I select the "collective time confirmation" checkbox, the intended functionality is (form the transaction help) "If you select this field, the report program enters the selection result directly in the collective entry screen, without previously displaying a list of results from which you can reselect."
However, if I check the box, the results still don't appear directly in the collective entry screen, but still as a list of results.
Is there some configuration missing? Have you encountered a similar error?
Thanks!
Andreashi
i think there is some problem with the transaction ,in easy access menu it is displayed as S_ALR_87013431 confirmation with operation selection.
i think same screen it has incorporated
you can use IW48 which fullfil your requirement
regards
thyagarajan -
ABAP RunTime Error for tcode : TS01
Hi Friends,
Actually we are getting the run time error while creating the standard security transaction using TS01.
After entering the data in the first screen -- click on the enter -- enter the details inside & click on save button--then it will go run time error.
Here while calling the method, we are getting the run time error.
call method cl_class_position_op_trs=>trs_flows_calculate_tax
exporting
im_tab_flow = L_TAB_FLOWS
im_company_code = l_company_code
im_security_account = l_security_account
im_security_id = l_security_id
receiving
re_tab_flow = RE_TAB_FLOWS
exceptions
failed = 1
others = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4
RAISING FAILED.
endif.
Actuallly here the problem with the class becuase the class cl_class_position_op_trs itself has error.
In the class , in the local classes they are calling again the class cl_class_position_op_trs. becasue of this reason it was going to run time error.
So we are getting the run time error.
We have OSS note for the same problem.But i am unable to implement that.
Please guide me how to implement the OSS note 751947.(Note 751947 - TRS: Syntax error due to ABAP Compiler)
please find the error details:
Runtime Errors SYNTAX_ERROR
Occurred on 03/12/2008 at 00:26:57
Syntax error in program "CL_CLASS_POSITION_OP_TRS======CP ".
What happened?
The following syntax error occurred in the program
CL_CLASS_POSITION_OP_TRS======CP :
"Components of classes declared using "CLASS CL_CLASS_POSITION_OP_TRS D"
Error in ABAP application program.
The current ABAP program "CL_CLASS_POSITION_TRS=========CP" had to be
terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "CL_CLASS_POSITION_OP_TRS======CP
You can also perform the syntax check from the ABAP/4 Editor.
If the problem persists, proceed as follows:
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion date.
Error analysis
The following syntax error was found in the program
CL_CLASS_POSITION_OP_TRS======CP :
"Components of classes declared using "CLASS CL_CLASS_POSITION_OP_TRS D"
Regards.
Lakshmi
Edited by: lakshmi podile on Mar 14, 2008 8:08 AMDid you go through the steps in the note?
Use transaction SE24 to distribute the local classes into new include structures as follows:
Call transaction SE24 for the class CL_CLASS_POSITION_OP_TRS.
Select the following menu option:
Goto --> Class-local types --> Local Class Definitions/Types
Confirm the message that proposes conversion into the new structures.
Choose Utilities --> Regenerate sections from the menu.
Activate the class and all changed objects.
Try and do this, and see what happens.
Good luck. -
Refresh Runtime Error in TCODE DB02
Hello Experts!
Was just trying to refresh the statistics that I have for my DB Spaces in DB02, but I suddenly come up with this error. Can anyone tell me what this means and why this is suddenly happening (As I had no problems using this functionality just last week). Thanks!
ST22 Error Log:
Runtime Errors DBIF_DSQL2_SQL_ERROR
Exception CX_SY_NATIVE_SQL_ERROR
Occurred on 03/30/2009 at 11:11:51
SQL error "-727" occurred when executing EXEC SQL.
What happened?
The error occurred in the current database connection "DEFAULT".
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Error analysis
An exception occurred. This exception will be dealt with in more detail
below. The exception, assigned to the class 'CX_SY_NATIVE_SQL_ERROR', was not
caught, which
led to a runtime error. The reason for this exception is:
How to correct the error
Database error text........: "INF-727: Invalid or NULL TBLspace number given to
dbinfo(dbspace)."
Triggering SQL statement...: "FETCH NEXT "
Internal call code.........: "[DBDS/NEW DSQL]"
Please check the entries in the system log (Transaction SM21).
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"DBIF_DSQL2_SQL_ERROR" CX_SY_NATIVE_SQL_ERRORC
"RSINFTD1 " or "RSINFTD1 "
"START-OF-SELECTION"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
SM21 Error Log:
BY2 Database error -727 at FET
BY0 > INF-727: Invalid or NULL TBLspace number given to
BY0 > dbinfo(dbspace).
R68 Perform rollback
AB0 Run-time error "DBIF_DSQL2_SQL_ERROR" occurred
AB1 > Short dump "090330 111151 gtbwspd 10002568 " generatedHi.
I already had this issue and I solved by this way:
My issue happened in the following SQL statement:
94 EXEC SQL.
SELECT MAX(A.NEXTSIZE)
96 FROM SYSTABLES A, SYSFRAGMENTS B
97 WHERE DBINFO('DBSPACE',B.PARTN) = :TS_CHECK-DBSNAME
98 AND A.PARTNUM = 0
99 AND A.TABID = B.TABID
100 INTO :MAXEXT
101 ENDEXEC.
1) Please run the following sql query:
select fragtype, tabid, partn from sysfragments where partn = 0
2) Figure out which table it is:
select tabname from systables where tabid =<tabid>
3) Check the indexes of that table with oncheck -cI.
4) If you found indexes DISABLED, then you should enable them again.
5) To solve the problem you can:
-enable dropped indexes:
set indexes,constraints for <table> enabled;
-rebuild the indexes
Afterwards this operation should be corrected.
I hope I could be helpful.
Thanks,
Walter Oliveira.
Maybe you are looking for
-
Is anyone else having problems with Office for Mac and Lion?
Since installing Lion 10.7.1 on a macbook pro 2.53 Ghz 4GB 1067 MHz DDR3 I have had no end of problems. Both Excel and Word hang, crash and saving an Excel file is a pain. A 12mb spread sheet just took 4 minutes to save! I have MS Office for Mac 2011
-
I can open iTunes but if I click to download any app an error message pops up stating cannot connect to iTunes please try again later. I reset my Wifi router n deleted address and reset it on ipad, iTunes password reset then updated on ipad, restarte
-
Report against BW and ECC for reconciliation
Hello Everyone, I would need some advice on crystal report design for a requirement where I have to use an existing query on BW to build a crystal report and then create a report on top of table in ECC and then do a reconciliation between these two d
-
Pr CC Mac: third party audio VST plugs issue
The GUIs are garbled and useless on my VST plugs from WaveArts. But, the AU versions work fine. Another bug in Pr CC Mac. Anybody else?
-
I have a mac, and I was using google maps. I was trying to find the views of the actual buildings on the maps, and clicked on the 3D option in the lower left corner. That caused an immediate crash of firefox and has done so everytime I try to open go