Error in Test Connection of Content Repositories

Hello All,
I m creating a Content Repositories via Trnaction OAC0.
But, when i click on "TEST Connection" icon for testing the Connection, its giving the error " HTTP ERROR : 400 BAD REQUEST".
I have checked, all my entries while creating Content Repository are Correct.
My Dcument type is Document Management System(DMS) and
Storage Type is HTTP Content Server.
Please Help.
Thanks,
Deepak

Hello,
Test Page of Content Server is working fine.I have already done the URL Check for Content Server.
Below are the details of my dev_http trace.
<Date time>
[5956] sccsid: @(#) $Id: //bas/710_REL/src/krn/ftp/http.c#16 $ SAP
[5956] Environment SAP_CODEPAGE = 4110
[5956] new codepage 1160
[5956] HTTP Start : argc - 6 a0 - saphttp
[5956] /H/<IP> sapgw00 39113162 CPIC_TRACE=2 IDX=4
<Date time>
[5956] elapsed time 4625 ms - active time 0 ms - wait time 0 ms
[5956] SAPHTTP end
Thanks,
Deepak

Similar Messages

Error while Test Connection with Connector

hi all:
     there is an error while Test Connection with Connector , I also test it through sys administration->sys configuration->
suport -> sap transaction, I got all errors, I put these two errors as folows, could you please tell me how to sovle it
***************ERROR 1 while *error while Test Connection with Connector ******************************************************
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this
system object
Results
Retrieval of default alias successful
Connection failed. Make sure that Single Sign-On is configured correctly
************error sys administration->sys configuration-> suport -> sap transaction        ********************** 1.5 #0025B3E02892006100000A0800001798000487530FB0122E#1274690722265#com.sap.portal.prt.runtime#sap.com/irj#com.sap.portal.prt
.runtime#guodongdong#47472##n/a##690347f0670e11df98cc0025b3e02892#SAPEngine_Application_Thread[impl:3]
9##0#0#Error##Java###04:4524/05/10_0077_6087550
[EXCEPTION]
#1#com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in SAP Application Integrator occured: Application URL
&\#39;:///sap(ZT1KVXBWektldldTeV9QQXBXRjNaWTRBLS1OZmRvZzBRWWY2QmN0WThNUmgqdUlRLS0=)/bc/gui/sap/its/webgui&\#39; is not valid!
Please check the protocol and host entries for system &\#39;sapdev&\#39;.
     at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContentPass
(AbstractIntegratorComponent.java:123)
     at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContent(AbstractIntegratorComponent.java:98)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
     at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
     at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
     at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
     at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:523)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:412)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process
(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)

Hi,
As per this part of the trace:
Exception in SAP Application Integrator occured: Application URL &\#39;:///sap(ZT1KVXBWektldldTeV9QQXBXRjNaWTRBLS1OZmRvZzBRWWY2QmN0WThNUmgqdUlRLS0=)/bc/gui/sap/its/webgui&\#39; is not valid! Please check the protocol and host entries for system &\#39;sapdev&\#39;. at ...
You can clearly see that the system object 'sapdev' is not configured correctly/at all - you are trying to launch transaction iView
(WEBGUI) and in order to do so you should configure the 'internet transaction server' category of the system object
with the hostname of the ITS server.
Generally the template is
<System.Access.ITS.protocol>://<System.Access.ITS.hostname>/sap<ESID>/bc/gui/sap/its/webgui?\....
So that's why you got
Please check the protocol and host entries for system ..

Error in Test Connection - Content Repository does not exist

Hi, I have created a content repository which points to our own external HTTP content server which is a DMS through transaction OAC0.
In transaction CSADMIN I can see our server's status as running, still it shows yellow icon "customizing missing" in CSADMIN and in transaction OAC0 whenver I click "Test Connection" it gives the message" Content Repository does not exist". CMS 106.
Kindly help.
Regards
Neha

Hi,
We are using OACO as follows:
Choose Tools ® Business documents, Environment ® Knowledge Provider® KPro® Content Repositories
Enter the following fields in the u201CChange Content Repositories : Detailu201D :-
1) Content Rep. :- ZO (Content Repository Name)
2) Description :- Content Repository
3) Storage type :- HTTP content server.
4) Version no :- 0045
5) HTTP svr:p :- IP or machine name of application server on which DMS has been deployed : Web port of the application server on which DMS has been deployed.
1) Program :- sap/sapDocView.jsp
Save the created Content Repository by clicking on u201CSaveu201D. We are working on SAP 4.7 versionon a SAP development server and the content repository has not been transported after creation. Will not transporting be causing this error ?
Please reward points
Thanks
Vikranth

Error Validating Test Connection while installing

Sir I've already installed jdev1.1.1.1.6.0 ,Xe database ,RCU, Weblogic Server is already installed in Jdeveloper(integrated weblogic server)and now to follow some tutorial I've gone thru the installation of UCM
I'm using windows7professional 64bit
When I try to
Execute .../runInstaller -OPEN WITH WINDOW IS APPEAR..what to do
and IF I assume that from setup CD1 UCm is completly installed cox it cant ask me to give path for part C2 ,and also gone complete 100% ,
when creating DOMAIN ..TEST Connection is failed due to incorect username and passeord
HOW TO FIND THAT pasword that I've selected for Schema during RCU installation

Universal Content Management 11gR1 is downloaded in 2 parts Zip files ofm_wcc_generic_11.1.1.6.0_disk1_1of2.zip and ofm_wcc_generic_11.1.1.6.0_disk1_2of2.zip and is extracted in 2 Folders Disk1 and Disk2 respectively.
UCM\Disk1\install folder contain all the Setups version ::for linus , solaris windows for both 64 and 32bit
my question is
What is the purpose of DISK2 contain STAGE folder contain Components folder as DISK 1 installation is 100% comleted
AND
COMMAND -- Drop Schema PORTAL is not working , I've created UCM and PORTAL Schema using RCU .. when Removing /DROOPING UCM/DEV and PORTAL schema ..it gives some error ..when I try to DROP UNUSED TEMPORARY CREATED SCHEMA -
please tell me sqlplus commands and rights for this ..

Error on testing connection in IDT

Hello,
I got a BI 4.1 SP03 over SBO. Connection is to MS SQL 12.
got a strange error while trying to create measure inside IDT, after a while that evertyhing was working fine.
Continued the 'investigation' and found out the connection in the BO to the DB fails - while pressing "EDIT" on the connection and pressing "Test" inside the popup - succeed.
Important: This is happening since upgrade from BI 4.0 to 4.1 SP03 3 days ago.
The file attached is the error I get while creating a measure on IDT.
Webi working fine, dashboards working fine. data is coming from DB fine. only IDT and DS runs into error (same error in all actions)
Couldn't find in similar case around - anyone have any idea?
Thank you,
Or.

Hi,
I have seen the BI4.1 SP03 IDT test connection failed while the test of the same connection succeed in edit connection in IDT.
It seems that the connection I created, which is an Oracle JDBC connection, in BI4.1 SP03 universe designer is somehow not compatible with IDT test although the JDBC connection works in BI Launchpad and in Webi rich client.
The workaround is to delete this problem JDBC connection IDT does not like, and recreate it in IDT instead of universe designer. After that, this recreated JDBC connection works successfully on both universe designer and IDT connection test.
Hope this helps,
Jin-Chong

Error in Test Connection through the DQE for my JDBC system

Hi,
I created a JDBC system and I gave DQE properties to connect to the PUBS database.
I am getting the below error when I did Test Connection through the DQE.
Test Details:
The test consists of the following steps:
1. Checks the existence of a backend admin user ID/password in the system properties.
2. Checks the existence of a default alias for the system.
3. Checks the DQE connection.
Results
1. Backend admin user ID and password exist in the system properties.
2. Default alias of the system exists.
3. DQE connection failed. The system is currently being loaded. Please wait and try again.
I re-entered admin id and password in DQE properties as per OSS note 761753.
Still I am getting the same error.
Thanks,
Ramakrishna

Vadim
I did all steps mentioned by you.
Still my issue is not resolved...
Thanks,
Ramakrishna

Error while testing connection

Hi
i am trying to configure an RFC destination, I am getting the error msg
""Program id" not registered. CPI-C error CM_ALLOCATE_FAILURE_RETRY"
while testing the connection.
How to register a program.
Thanks

Any suggestion pl

10.1.3 JDeveloper error in testing connection to 10.1.2.0.2 BPEL Midtier

Hi,
I am using JDeveloper 10.1.3 (JDEVADF_10.1.3_NT_060125.0900.3673) and when I try to test a connection to my 10.1.2.0.2 BPEL install in errors giving
java.io.FileNotFoundException: http://machine:80/integration/services/testconnection/BPELConnection
Everything is up an running and I can connect to my BPEL process manager console.
Any ideas?
Thanks
Joel.

jgrocock,
even though Jdev 1013 is production, BPEL PM 10.1.3 is not yet production, and so is the BPEL Designer for JDev - this is the reason for little issues like this here .. I would recommend (as you are writing a label, looks like you work for ORacle) to go ahead and file a bug that we can ensure in the QA cycle it's fixed..
thx clemens

Error when testing connection from EP6.0 to ERP/2004

Hi this is Omar Poueriet and my case is the following:
Recently I finished to installed an EP60 SP19 based on Java+ABAP addin and everytime and then I logged on my EP system and define the corresponding settings for:
Connector property
User Management property
WAS property
ITS property
with their corresponding values at each stage, now everytime I try to test the connection in order to see that everything has gone fine, an error message is displayed at every defined connections, meaning the following:
<b><b>"HTTP/S connection failed. Make sure the protocol, host name, and user mapping are correctly defined."</b></b>
Please if any of you GURU's has any idea of what's going on this case, feedback ASAP, because I have some pendient task to complete based on EPortal 6.0 and ERP/2004 and that's STOPPED by the moment.
Awaiting for your feedback shortly,
Regards
Omar Poueriet

Don't worry if the connection tests fail. It is better to create an iView that uses the system and see if that works...
Cheers

Error while testing connection WAS in Enterprise Portal

Hi All,
While performing the connection tests in SAP enterprise portal
I have used user logon method UIDPW
ITS connection and Connection Test for Connectors are getting successful but SAP Web AS Connection is showing -:
Results
1. The system ID is valid
2. Retrieval of the system was successful
3. The system object represents an SAP system
4. The following parameters are valid: WAS Protocol (http) WAS Host Name (sapserver1)
*5. HTTP/S connection failed *
Settings for WAS
WAS Description: IP address of the system
WAS Host Name: sapserver1
WAS Host Name: Pls tell me the correct path
WAS Protocol: http
Waiting for your quick responses.
Thanks & Regards,
Prashant.

Hi Juan,
As far i know he is trying to test the was connection from his portal
While performing the connection tests in SAP enterprise portal
WAS Description: IP address of the system
WAS Host Name: sapserver1
WAS Host Name: Pls tell me the correct path
WAS Protocol: http
As far as my understanding,this he would be looking for this,
any ways this is my perception.
Regards,
Vamshi.

LDAP over SSL gives an error when testing connection in RPD

Hello all,
I got something strange. When I configure OBIEE to use an LDAP server (ADSI) it just works fine.
Now when I change the port number and check SSL and I check the connection again it says:
[53016] The IBM LDAP SSL (Secure Socket Layer) client library initialization failed: Reason: Bad keyfile password
But now when I log on to OBIEE with an AD user it just works...
Anyone with the same problem/issue?

On Sun, 23 Feb 2014 08:23:40 +0000, GreeMann wrote:
I believe my main problem is that I can not issue any template I have tried other template but I get the same permission error I have tried different account I get the same permission error, is there any way that we can change the default template permission.?
You have not followed the instructions I gave. As I've said in previous
posts, the way you've got this template configured is never going to work
as it is configured to build the subject information from AD and one of the
attributes being included in the Subject Alternative Name is the DNS. Since
you're using a user account to request the certificate when it attempts to
build the subject alternative name it is trying to add the user's DNS name.
A user account does not have a DNS name.
I would suggest that you delete any custom templates you've already created
and start over again. As per one of my previous posts:
http://technet.microsoft.com/en-us/library/ff625722%28v=ws.10%29.aspx
Follow the instructions in the Using the Certificate Enrollment wizard with
an enterprise CA section.
If you don't follow the instructions I've given you, I can't help you.
Paul Adare - FIM CM MVP
Of all the things I've lost, I miss my mind the most.

Error in test connection: Connection refused to host: 172.22.100.77

Hi,
I'm trying to connect B1if to a SBO DB in a different server that dosen't have B1if instaled.
I'm getting this error:
XCE001 Nested exception: java.rmi.RemoteException: com.sap.b1i.xcellerator.XcelleratorException: XCE001 Nested exception: java.rmi.ConnectException: Connection refused to host: 172.22.100.77; nested exception is:
java.net.ConnectException: Connection refused: connect
Best Regards,
Ana Silva

Hi,
B1if is only a framework. Both db should install the framework.

Please help! Error when testing connection, (-111) Unable to access SBO-Com

Hi everyone,
I have set up and installed the integration component on a customers site because they would like to use the dashboards and mobile solutions.
I set up a company in the SLD but I cannot get the connection to work, i only get the following message
com.sap.b1i.adapter.dia.exception.ConnectionFailedException: Connect to Business One failed.
(-111) Unable to access SBO-Common database
{b1Server=10.14.75.110, company=SAP_INUIT_AB, licenseServer=10.14.75.110:30000, dbType=6, dbUser=sa, userName=B1i}
I have used the ip-adress instead of logical names.
I cannot figure out whats wrong, I have been searching for hours..
Any ideas??
Thanks
Br
Anders

You have to install Integration tool first and then the DB. Try this , via sql take all the companies offline and refresh your SAP B1 login. The companies will not be visible. Restart integration services. Make the companies Online.
In the SAP DB change the B1i password. It should be same as the B1i admin password.
Go to SLD, change B1user password.
Logout
Refresh Integration service.
Check the SLD connection.

Archive Link - Content Repository - Test Connection error

Hi all,
We are trying to create a content reposiotry in SAP 4.7, it gets created and is displayed in SAP content reposiotry list.
But when I click on "Test Connection" I get the error "Connection Repository does not exist".
Please help as its very critical to solve the problem at the earliest.
Regards
Neha

We are using OACO as follows:
Choose Tools ® Business documents, Environment ® Knowledge Provider® KPro® Content Repositories
Enter the following fields in the u201CChange Content Repositories : Detailu201D :-
1)   Content Rep. :- ZO (Content Repository Name)
2)    Description :-   Content Repository
3)    Storage type :-   HTTP content server.
4)    Version no   :-    0045
5)     HTTP svr:p :- IP or machine name of application server on which DMS has been deployed : Web port of the application server on which DMS has been deployed.
1)       Program :-   sap/sapDocView.jsp
Save the created Content Repository by clicking on u201CSaveu201D. We are working on SAP 4.7 versionon a SAP development server and the content repository has not been transported after creation. Will not transporting be causing this error ?
Edited by: Neha Bhambu on May 27, 2008 11:09 AM

Test Connection - Content Repository does not exist

Hi,
I have created a content repository which points to our own external HTTP content server which is a DMS through transaction OAC0.
In transaction CSADMIN I can see our server's status as running, still it shows yellow icon "customizing missing" in CSADMIN and in transaction OAC0 whenever I click "Test Connection" it gives the message" Content Repository does not exist". CMS 106.
Kindly help.
Regards
Neha

Hi,
We are using OACO as follows:
Choose Tools ® Business documents, Environment ® Knowledge Provider® KPro® Content Repositories
Enter the following fields in the u201CChange Content Repositories : Detailu201D :-
1) Content Rep. :- ZO (Content Repository Name)
2) Description :- Content Repository
3) Storage type :- HTTP content server.
4) Version no :- 0045
5) HTTP svr:p :- IP or machine name of application server on which DMS has been deployed : Web port of the application server on which DMS has been deployed.
1) Program :- sap/sapDocView.jsp
Save the created Content Repository by clicking on u201CSaveu201D. We are working on SAP 4.7 versionon a SAP development server and the content repository has not been transported after creation. Will not transporting be causing this error ?
Please reward points
Thanks
Vikranth

Error in Test Connection of Content Repositories

Similar Messages

Maybe you are looking for