Error in Test Script in eCATT

Hello Experts,
When i am executing my test script after recording the transaction,the system is running FB50 in the remote system but giving error in foreground mde.
Attached is the snapshot of error.
Abhishek

thanks AP for your reply.
I have deleted and  I have recreated the file with new recording but the error still ramains.
Can anybody assist to solve the issue ?
Thanks in advance.

Similar Messages

  • Using mercury test scripts in eCATT

    Can anyone tell me if its possible to use the test case built in Mercury QTP be used as eCATT test case to run the test. If thats possible wats the way to use them. All along i hav been using Mercury to Test Sap application now i need to build the test scripts in eCATT for the same. Can i make use of the test scripts built in mercury
    is it possible to use the test scripts built in the older version say 6.2 of mercury used in 4.6C or 4.7 os SAP eCATT
    can i atleat get the scripts into CATT and then migrate it to eCATT.

    Hello,
    Please post your question in the WAS forum.
    SAP NetWeaver Application Server
    thx,
    E.T.

  • Error opening test scripts in Build and Debug with Screens

    Hello,
    I am testing scenarios in the Build and Debug with screens mode in OPM. I save each scenario as a test script by clicking the Export button and saving. Some test scripts are able to be opened again, yet when I try to open others, I get the error message shown at the link below and am unable to load the test script.
    http://imgur.com/uqh80
    This did not happen previously, it just started today. All of these test scripts were created today, and the attributes have not been changes since the test scripts were created. This is seriously hindering my scenario testing ability.
    Does anyone know how to rectify this problem?
    Thanks,
    Christine

    Hi Kristy,
    I am in OPM 10.2.
    To troubleshoot, I tried redoing the test scenarios that werent working from scratch (rather than building off a previous scenario), and this time it worked. I am not sure why it works now and didnt before, and I am also not sure if they will continue working.
    I will continue creating the scenarios and will be sure to update if it fails again. In the case it does fail, I will try your export recommendation.
    Christine

  • Error while testing script in ME22N

    HI Friends,
    I am testing a script in ME22N.
    When i enter the PO number and press the print preview button I get the following error
    *Enter rate BAM / EUR rate type M for 20.1..09.0 in the system settings*
    Please let me know what should be done.
    Thanks in advance,

    Hi deepak,
    Check the settings BAM / EUR rate type M with the basis team.
    Regards,
    Sravanthi

  • ECATT  problem in creating test script

    Hello Everybody,
    when i am creating test script in  ECATT
    i am getting  this type of error  " no script text exit " .
    i didn't understand this  error .
    if anybody hv knowledge  abt this then plz suggest me
    also give me  some documentation related ECATT with print-screen
    ASP

    Hi sandeep,
           You can refer the following link. Here, you can get more knowledge about eCATT.
    http://help.sap.com/saphelp_nw04/helpdata/en/10/f3383fe58d5900e10000000a114084/frameset.htm
    Do reward point if it is useful...
    Regards,
    Gopi

  • ECATT calling multiple Test script to single test script

    HI experts,
    How to integrate i mean calling multiple test script  to single test script and store in single test script in ECATT
    Moderator message: please search for available information/documentation.
    Edited by: Thomas Zloch on Apr 8, 2011 9:50 AM

    HI experts,
    How to integrate i mean calling multiple test script  to single test script and store in single test script in ECATT
    Moderator message: please search for available information/documentation.
    Edited by: Thomas Zloch on Apr 8, 2011 9:50 AM

  • Error During ECATT test script creation

    Hi,
    I am creating test script using SECATT t.cde. I select traget system and click on Pattern Button and provide input as follow.
    Group : UI Control
    Command : TCD (Record)
    Transaction : MM02
    When I click continue button, I am getting error "Transaction MM02 could not be found in Target System".
    I had check my RFC Configuration, its working properly.
    Please help me to solve this issue.
    Regards,
    Nisit

    Not sure what exactly you're asking, but here is a "how-to" article on eCATT creation:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/50bec015-14f1-2910-6080-9874b3499052

  • RPT_ECATT_EXECUTE_TEST to execute eCATT Test Scripts in background

    Hi everyone,
      Found this program RPT_ECATT_EXECUTE_TEST  to execute eCATT Test Scripts in the background. However, when i try to run a TCD test script in the background, im getting a "Control Framework: Fatal error - GUI cannot be reached" error in the job log.
    Is there a workaround for this?
    Thanks in advance.

    Hello,
    If the recording is done using SAPGUI , here is the solution .
    Say there are 3 radio buttons.
    First time record with only one radio button clicked , complete the entire recording and save the script.
    Split the recording using Methode wise, once this done you will have one SAPGUI for each operation performed.
    Reopen the script in the change mode and also open the transaction screen where you want to record the remaining radio buttons.
    Do a SAPGUI attach twice once for each radio button after the SAPGUI of the first radio button .
    Once all the recoding is complete.
    Declare 3 different input parameters (basically 3 flags), one for each radio button.
    Note: SAPGUI recording is done only for checking the radio button and not unchecking.
    IF ( input_parameter_radio_button_1 = 'x' ).
    SAPGUI ( first radio button).
    endif.
    IF ( input_parameter_radio_button_2 = 'x' ).
    SAPGUI ( second radio button).
    endif.
    Similarly for the third one.
    Hope you understood the logic.
    Thanks & Best regards,
    Ajay

  • Does Single Sign on feature affect the eCATT test script

    Hi
    I am having problem with eCATT test scripts when running on the PC with single sign on feature .
    I am able to run the eCATT test script on PC with out single on feature .when I am trying to run the same eCATT script on the PC with single sign on feature it gives error message
    When the test script is executed it open up new session and tries to log on system and then it comes out of the Session  and gives the error message.
    Error When starting replay session Possible causes
    1) Scripting is deactivated in Replay system .
    2)User has not logged on with in given time or user has no Dailog rights .
    3) Too Many Sessions are open.
    Can you please Suggest me how to overcome this problem .
    The PC with single sign on feature is using SAP GUI 7.1 Version and the PC with out single sign on feature is using SAP GUI 7.2 Version . Will this affect the test script.
    Thanking you .
    Regards
    Kiran

    Hi
    The issue is resolved . Once the single sing on program is disabled on the machine the eCATT test scripts are working fine now .
    Thank you .
    Regards
    Kiran

  • Importing internal table data from FM to eCATT test script

    Hi all,
    I am working on Workflow project where by i need to post invoices related to purchase orders sent as scanned imaages. Incase all the data in the incoming invoice(scanned) is correct then i am using BAPI_INCOMING_INVOICE_CREATE to post the invoice.
    But when the data is wrong, i need to give the user MIRO transaction pre-populated with the invoice details so that he manually corrects them(after verification) and posts the invoice.
    I understand MIRO is an ENJOY transaction hence BDC doesn't work properly(i have tried with all kinds of options on recording and the problem comes incase of multiple POs) hence i choose to use eCATT.
    The recording worksfine but my real problem is the PO data (multiple PO details for same invoice) is in table form. In all my previous objects related to eCATT we used to upload the file, hence no problem of importing tables.
    But now as i'll call this test script from a function module which has all the POs in the form of internal table, i need to import this into my test script.
    Please any body tell me how to proceed in this case or please suggest me a better a way to record the MIRO.
    Thank you,
    Lakshmi Narayana.S

    Hello Raj,
    First of all thank you for your inputs.
    Yes, I know about Parking an invoice. even i am using it in some scenarios.
    If everything on the invoice matches with the values in SAP then i am posting it using BAPI invoice_create also.
    But for some scenarios like if the PO on the invoice doesnot match with actual PO then i need to create a work item in the Accounts Payable user's inbox and he will change invoice data manually (after getting confirmation and correction) and post it using MIRO.
    Here i need to pre-populate the MIRO with the invoice data so that he can correct and post it.
    Hence i was trying to write a BDC and as MIRO is an Enjoy transaction i thought writing a BDC is not a good idea (i tried writing BDC but had problems) hence i am using eCATT.
    Hope i am clear about my problem. Any inputs to solve this are welcome.
    Thanks,
    Lakshmi Narayana.S

  • In eCATT, How to mention the values as  input parameter during test script

    Hi,
    1. I am just learning eCATT tool. I created a Test Script by recording my transaction. But if i want to execute the recorded transaction with different data then how to store the values.
    2. How to execute my Test Script created in one client to another client of same server. is it just by mentioning the target system or do we have to do anything in anothere client.
    Lakshmi

    Hi
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0e0ebec-c9da-2910-689e-b1a22a621c7f
    Manoj Shakya.

  • Error opening a Test Script inUFT from Solution Manager

    This error is the subject of a call with SAP and HP but I wondered if anyone else has come across this problem.
    We work with Solution Manager 7.1 (SP11) and HP's UFT 11.53 to create automated testing. We ustilise the two free seat licences for UFT that are provided via enterprise support. We do not use HP's Quality Centre.
    On some occasions when trying to open a test script for editing UFT tries to open and then closes again. The error message below is displayed in solution manager.
    “External Test Tool Quick Test Professional Is Busy and Cannot Create a New Test Script”
    When this happens the local cache files are wiped. We have managed to salvage some of these scripts by pasting in copies of the cache file from another PC but some we had to recreate from scratch.

    If you don't have one already create a gateway instance on your Content Server.
    Change or create the RFC destination :  SAPKPROTP   type = T
    Check the radio button to start on Expicit Host 
    Enter the program = c:\winnt\sapkprotp.exe
    Enter target  host - use the hostname of the server for your Content Server
    Enter the Gateway information
    Regards,
    Brian

  • Transaction to find ecatt test script

    transaction to find ecatt test script and the table which stores ecatt test script
    transaction to find function group and the table which stores function group
    transaction to find general text and the table which stores general text
    where i should be able to change the devlopment class

    Hi Avinash,
    For ecatts check development class/package SECATT_DDIC and transaction SECATT.
    For general text transaction is SO10 and tables are STXH and STXL.
    For Object Naviagtor SE80 you can change development class.
    For function groups check ENLFDIR table.
    All transaction codes are stored in TSTC and TSTCT tables
    Thanks
    Lakshman

  • Errors while running load test scripts in Oracle Load Test

    I am a QA Analyst and this is my first time using the Oracle Load Test application. Acutally this is the first time I have done anything related to load test scripts. The Oracle Load Test version I am using is 9.10.0219. When I run some of the scripts with a user ramp up of 1 user per step, the load tests complete successfully. When I begin to adjust the number of VUs per step to 2 or more, I begin to get some of the following errors. By the looks of these errors can you provide any feedback as to whether these are issues with OLT or with the application I am running the load test against? Any help would be greatly appreciated.
    Thanks
    John
    - ThinBrowserException occurred. HTTP response code: 500 Internal Server Error
    - VariableNotFoundException occurred. Variable "web.jscript.httplbosinl1cccsmo_2468" not found for string: http://lbosinl1.ccc.smo.com:9595/Tmo/H5/portal/lipo_portal/{{web.jscript.httplbosinl1cccsmo_2468,Scenario}}
    - VariableNotFoundException occurred. Variable "web.jscript.httplbosinl1cccsmo_5617" not found for string:
    {{web.jscript.httplbosinl1cccsmo_1984,Suif_Context_Period_Date}}=
    {{web.jscript.httplbosinl1cccsmo_5617,12/05/2010}}

    Hi,
    It looks like an application issue since you are getting a HTTP 500. The other errors relate to the fact that ti can't resolve some dynamic values in needs to extract from the resonse content since the pages are different (probably due the 500 error).
    Regards,
    Jamie

  • Error executing BPC test script

    Hi,
    We are on HANA. Our performance team is trying to execute a test script from HP Load Runner. We are seeing the below error
    HTTP/1.0 500 Internal Server Error\r\n
    <TITLE>500 SAP Internal Server Error</TITLE>\n
    ERROR: XSLT: No valid XML source (termination: RABAX_STATE)<P>\n
      Error -26612: HTTP Status-Code=500 (Internal Server Error) for "http://fmsap980.erps.intel.com:8000/sap/bpc/files?method=list" [MsgId: MERR-26612]
    when we try and execute the same script manually within BPC front end, then no issues. everything is fine. Automating the test script is an issue.
    any script , same error.
    thanks for the help.

    Hey Ravi:
    Any chance you found a solution to this?
    Thanks
    Kalinga

Maybe you are looking for