Error in the activation of the storage bins

Im getting an error 'quant xxx for storage bin cannot be counted'.The putaway stock is there in the related bin and batch.(After confirming the transfer order using lt01,the putaway stock is transfered to the total quantity.)The Transfer order is confirmed.then also the error is coouring.What may be the reason?What should be done to eliminate the error?

the transfer order is usually confirmed with LT12.
You cannot do a physical count if there is a pick or putaway quantity in the quant.

Similar Messages

Hello. I would like to activate my CS3 Educational Program (version 2007) on my new computer. Unfortunatly he is not accepting my serial number. What can I do? I have delated the program on my old computer but it doesn't accept the activation on the new l

Hello. I would like to activate my CS3 Educational Program (version 2007) on my new computer. Unfortunatly he is not accepting my serial number. What can I do? I have delated the program on my old computer but it doesn't accept the activation on the new laptop.

Make sure you are using the correct serial number. Find your serial number quickly
If you did not deactivate the original installation then it is possible your two allowed activations have been used and you need to reset your activation count. To do that you need to contact Adobe Support thru chat and ask them to reset your activations. If you ask for more than that they will tell you they cannot offer you any support.
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

My used postpaid moto g was accidentally activated on verizon while I was trying to activate it on the tracfone boyp program. The phone was activated on tracfone but I could not dial the number *22890 to finish the activation. The setup wizard on the mot

My used postpaid moto g was accidentally activated on verizon while I was trying to activate it on the tracfone boyp program. The phone was activated on tracfone but I could not dial the number *22890 to finish the activation. The setup wizard on the moto g will only let you activate the phone on verizon. Had tracfone cs rep on my landline phone and was waiting for verizon rep on the moto g. Waited 20 minutes but verizon rep never answered.
How and where do I get help from verizon to deactivate the account and release my meid number. Also how do I bypass the setup wizard so that I can activate my phone on TRACFONE? Thank you.

There's no other way to track it other than Find My iPhone. All you can do is wait to see if it ever goes back online. The serial number will only help to identify it as yours if it is ever found, and the IMEI number would only allow your carrier to blacklist the phone so it couldn't be reactivated on their network, if the carrier offers this service.

TS3276 I cannot send mail. I have logged into my SP through the internet and have no problem I have tried to rebuild the inbox and it just flashes very fast - to fast to view the activity. The mail doctor shows all green lights.

I cannot send mail. I have logged into my SP through the internet and have no problem I have tried to rebuild the inbox and it just flashes very fast - to fast to view the activity. The mail doctor shows all green lights. This started after I disabled ICloud. I had to disable ICloud as I was not receiving all my mail.

I cannot send mail. I have logged into my SP through the internet and have no problem I have tried to rebuild the inbox and it just flashes very fast - to fast to view the activity. The mail doctor shows all green lights. This started after I disabled ICloud. I had to disable ICloud as I was not receiving all my mail.

Hello, today I am subscribed to photoshop CC but still has not passed and the activation of the post did not come serial number that do tell me?

Hello, today I am subscribed to photoshop CC but still has not passed and the activation of the post did not come serial number that do tell me?

creative cloud does not use a serial number. it uses your adobe id.
download the creative cloud desktop app (after signing in with your adobe id), Download Adobe Creative Cloud apps | Free Adobe CC trial
and use the desktop app to install your adobe creative cloud programs.
if you already have the cc desktop app and you need to refresh your adobe id, Sign in, Sign out | Creative Cloud desktop app

How to find the activity of the Info cubes or any other Info Provider

Hello everyone,
Is there anyway to find out the last activity date of the info cube or any other info provider?
One way is through tools--> Statistics for BI (But this is not working as I do not have enough authorizations in the office)
So, can anyone please give me a way to know the last activity date of all the Info Provider so that respective action can be taken on the Info Provider according to their usage.?
I also need the Procedure to know the activity of the queries also?
Hope to get an answer soon..!
Thanks in advance..!
Deepak

Hi,
Are you looking actvity related to (Data retrival or data load)? (When the last time data loaded in Info provider or when the last time query is executed on that Info provider)?
If this is your requirement then BI statistics is only way to find out so get the authorization for the same.
If your need is -- last changed/llast data load etc.. then you may check the option "last changed at" at in Info provider maintinence, and data load dates.
I hoep it will help.
Thanks,
S

Error in denesting activity for the luggage trading items.

Hello experts,
This has reference to the Denesting activity for the luggage trading items in SAP. There has been an error in the basic configuration for this activity, as the denested stock is being incorrectly valued & consequently a wrong impact is being posted to the P&L. The actual landed cost for the nested item is not flowing to the denested items.
We have been correcting this manually till now through an FI JV. However we need to correct the system urgently as this has a serious implication & the impact is considerably high. E
Procedure for De-nesting:
The procedure for De-nesting is being carried out at BLL location & at branches. Transaction code used for the same is MB1A. Two separate documents are prepared for de-nesting.
In MB1A, first document is being entered for Movement type 201 for depleting Nested item stock (Ref doc no 65489076) & subsequent document entered for movement type 202 for creating de-nested item stock (Ref doc no 6548769659).
The MAP for Nested Item is correctly being updated with each receipt through Mov Type 101. However the MAP for denested item codes is not being updated since the stock creation is through mov type 202. The Old MAP updated at the time of code creation remains stagnant. Thus the denested items are being valuated with an old MAP rate.
In normal condition, the value of both 201 & 202 should match. As a result, the gap between the two kept on increasing & the inventory gets overvalued. The entries are posted to 8765987 (Consum-Intrnl-TMu2013 Dom) GL or 8765988 (Consum-Intrnl-TM-Imp) GL.
Reference Accounting doc no 3025689745 & 1589645896 for above referred material docs.
Please advice on this issue
Thanks,
Ratnam

Activating ML is necessary because in my customer's company sell goods at planed price then revaluate value of inventories and COGS at actual price in the end of each of period. So we decide to use standard price control for trading goods and active Material ledger.
end of period, we run period procedure of ML for trading goods, we expect allocation different amount, revaluate inventories and consumption. Run revaluation step of costing run in ML, we revaluate all ending inventories and consumption transaction except billing transaction. So, we think that we need to run Ke27 to revaluate all line item document in COPA from billing.
so anybody to help me revaluate consumption amount from billing at actual price in end of period?
thanks in advance!

Can the standby become the active for the active standby pair

Hi all,
Will the standby database take over the duty of the active database when the active database fails?
If not is there only a read-only standby database and how high availability of the active stand pair works?
Thanks

That will work for a simple test/demo environment but it is not robust enough to use for real. If implementing a robust HA monitor and management framework were that easy then we wouldn't need Clusterware...What about all the different failure conditions, combinations and corner cases? Please don't make the mistake of thinking that this is close to adequate for production usage. You will just create a heap of pain for yourself. State management and co-ordination across multiple nodes is a difficult and complex problem which is why cluster managers have evolved into the thinsg they are today.
Just one simple example; the network that connects your detection program to both nodes is working fine but the network between the TT nodes is not. How does your monitor (a) detect this and (b) handle it? What of the network between the monitor and one of the nodes fails but the connection to the other node and between the TT nodes is okay? How is that detected/handled? Ensuring that you 'do the right thing' in each case and don't take any action that could result in loss of service? And these are the 'easy' cases...
Chris

How can i only allow the activation of the JDialog on top?

Hi to all,
i have a problem with a mask swing
Well, my problem is this:
In a window, when i click on save button, it's open a customizing JDialog. But i would like how i can deny a click out of this JDialog, that is on top.
In other words, in this situation, with a jdialog on top, if the user click once again on the save button or out of this jdialog, the jdialog must stay on top and active.
How i can this?
Please help me!!
the code that realize my class is this:
public class ConsegnaOrdineDialog extends JDialog implements ActionListener {
     private JOptionPane optionPane;
     private String dataOrdine;
     private JButton si, no;
     private JTextField dataConsegna;
     public ConsegnaOrdineDialog(String dataOrdine) {
          this.dataOrdine = dataOrdine;
          dataConsegna = new JTextField();
          si = new JButton("Si");
          no = new JButton("No");
          si.addActionListener(this);
          no.addActionListener(this);
          JPanel panel = new JPanel();
             panel.setLayout(new BorderLayout(5, 10));
             panel.add(dataConsegna, BorderLayout.NORTH);
             panel.add(si, BorderLayout.WEST);
             panel.add(no, BorderLayout.EAST);
          Object[] options = {panel};
          optionPane = new JOptionPane("La data �:",
                JOptionPane.QUESTION_MESSAGE,
                JOptionPane.NO_OPTION,
                null,
                options,
                dataConsegna);
          setContentPane(optionPane);
     public void actionPerformed(ActionEvent e) {
          if (e.getSource() == si) {
          if (e.getSource() == no) {
               super.dispose();
}

in the constructor
setModal(true);

With the update my ipad mini in the 6.3 version i have seen That's The Possibility of the active in the 4g but there is the mini ipad 4g

I would like to know if there is 4g in ipad mini

There are 2 versions of the iPad Mini. Wifi Only and Wifi + Cellular.
If the iPad Mini is the Cellular version then yes it can connect to a 4G network.
If its the Wifi only version, then it cannot.

Create the stock in storage bin level

Hai all
 while i am doing transfer of order it is asking that storage unit type and the material stock is not maintained in storage bin .
can anybody tell me how to maintain the stock in bin level .please help me is there any tcode for that
regards
satish

Dear Satish
A storage type generally contains several storage spaces or slots. These are called storage bins in Warehouse Management (WM). The storage bin is the smallest available unit of space in a warehouse. The storage bin therefore describes the position in the warehouse where the goods are or can be stored.
Since the address of a storage bin is frequently derived from a coordinate system, a storage bin is often referred to as a coordinate. The coordinate 01-02-03 for example, can refer to a storage bin in row 1, stack 2, and level 3.
You assign each storage bin to a specific warehouse number and storage type according to its location. You must also assign each storage bin to a storage section.
You can also define the following additional characteristics of a storage bin:
 --> Maximum weight
 --> Total capacity
 --> Fire containment section
 --> Storage bin type (for example, for small or large pallets)
With certain stock placement strategies, the storage bin type plays a significant role in optimizing the automatic search for a storage bin in connection with the pallet type. For example, you can define the WM putaway strategy to place large industrial pallets into a specific large bin type and smaller pallets into small bins.
For information on how to define storage bins, call up the Implementation Guide (IMG) for Warehouse Management and see under Master Data --> Storage Bins .
Generally speaking, you can use any combination of letters and numbers for a storage bin coordinate with the exception of certain alphanumeric characters that are used for stock placement strategy P (according to pallet or storage unit type).
When goods are placed into storage, the system selects coordinates in ascending order according to specific sort criteria, and assigns the next available storage bin based on the coordinate structure you define for creating bins.
Thanks
G. Lakshmipathi

Error during activation for the table CE10100

Dear Gurus,,,,,,
During upgrdaing customer system from 4.7 to ECC 6.0 I am facing error in the activation of the generated table CE10100.
When I checked the same it says that the Check field CE10100-KMVTNR was missing from foreign key field definition. I checked the data element of the field as VRTNR (Sales Representative) and the domain as PERNR.
I also checked the foreign key definition of the field wherein the only field MANDT is present from the foreign table (check table being PA0001) against the same of the table PA0001.
Please help.....
Thanks in Advance....
Abhi..

Hi Abhi,
Did you compare the both systems. Check all activated or not if need regenerate once.
Regards,
Madhu.

Inventory block is active in storage bin altough there is no open inventory

Hello,
We're using continuous inventory method in our warehouse. Sometimes, we see that inventory block is active in a storage bin, altough the all inventory documents regarding this bin are cleared and there is no open inventory document for the related bin. Do you have an idea how could this happen ?
Thanks in advance...

Hi,
This kind of issues occurs due to some inconsistencies during the processing of inventory processes.
I request you to check all the tables regarding the inventory statuses for LINK, LINV, LINP etc.
Also please check whether the quant also is cleared correctly in the table LQUA.
If only the LAGP-SKZSI is active. Then you have to remove this flag manually in debugging via SE16 for this field.
Kind Regards,
ALV Ramana

Activation of the activity fails u0096 no source files in the active workspace

Dear All,
Im working on a NWDI installation since last month. The NWDI server (NW2004s) has been installed and configured with the following parameters:
Some Details:
- Java Stack on SPS 12
- No complete Developer Workplace, we only use the Studio (SPS 12)
- OS: WIN 2003
- DB: Oracle 10g
- SDK: 2 SDK, Standard Edition x64 1.4.2_15
Installation Usages Types: DI, AS Java, EP Core, EP (EP for the Visual Composer)
Performed configuration steps:
- adaptation of VM parameter in the Visual Admin
- patched the NWDI Server and the Studio from SPS 9 to support package stack 12 + available single patches
- run the template installer => NWA with type DI Allinone run all post installation Steps for DI, CBS, CMS, DTR
- Oracle Parameters changed, User and Authorizations created and assigned (UME, J2EE Security roles, DTR => ACL List), SLD (Creation of a new Landscape), Configuration of the CBS with the VA
- Configuration of the Studio (SAP J2EE Engine (fill in the NWDI engine), Proxy Settings, Development Configuration Pool)
Development Steps for an example:
- Creation of a new software product (SLD)
- Namespace reservation on SLD => Application Context Root, Development Component Name
- Created a Domain and a Track on CMS
- Attached all Software components to the track (my own dc, SAP-JEE, SAP_Buildt, SAP_JTechs)
- Check-In the Software Components on Transport studio => CMS
- Moved the development configuration into Studio
- Created a ear- and a web-project => Display a JSP File (Its the same example like in the SAP Course TADM10)
- Check-in the activity under Open activities => Activate
My problem appears during the check-in phase in the studio. I was able to check-In the source files in to the inactive Workspace on the DTR, but the activation of the activity fails. (I thought that the build process runs automatically after the activation - also the movement from the source files from the inactive to the active workspace?).
I received no error message, but I cant find any source files in active workspace. The activity seems to be pending. I locate the request in the CBS, the request state is failed regarding the request type activate.
At the moment there is no separate runtime system assigned to the NWDI System.
Questions:
1. Have I forgotten an important configuration step?
2. Can I use the NWDI Server also as a runtime environment (DEV System)?
Please let me know if somebody has an idea.
Thanks.
Christoph

Hello Michael,
thanks a lot for your answer.
I found the following error messages in the request log:
Calculate all combinations of components and variants to be built...
 "xxxtest.com/math/calc/webdc01" variant "default"
 "xxxtest.com/math/calc/webdc01" variant "default" cannot be built. Activation will fail.
 INVALID dependency is declared to public part: default.
 [DC 247 variant "default"][SC 65 "xxxtest.com_TASCHENRECHNER_1"] using [PP default of DC 6 at Build-Time Dependency]
 "xxxtest.com/math/calc/eardc03" variant "default"
 "xxxtest.com/math/calc/eardc03" variant "default" cannot be built. Activation will fail.
 The required Build Plugin "sap.com/tc/bi/bp/enterpriseApplication/enterpriseApplication" IS UNKNOWN. None of the compatments contains a suitable plugin for this component.
 [DC 248 variant "default"][SC 65 "sanofitest.com_TASCHENRECHNER_1"] using [BP sap.com/tc/bi/bp/enterpriseApplication/enterpriseApplication]
Prepare build environment in the file system... started at 2007-09-04 06:13:54.316 GMT
Prepare build environment in the file system... finished at 2007-09-04 06:13:54.316 GMT and took 0 ms
===== Pre-Processing ===== finished at 2007-09-04 06:13:54.332 GMT and took 406 ms
Change request state from PROCESSING to FAILED
ERROR! The following problem(s) occurred during request processing:
ERROR! The following error occurred during request processing:Activation failed due to component "xxxtest.com/math/calc/webdc01" variant "default". The component is BROKEN.
ERROR! The following error occurred during request processing:Activation failed due to component "xxxtest.com/math/calc/eardc03" variant "default". The component is BROKEN.
REQUEST PROCESSING finished at 2007-09-04 06:13:54.332 GMT and took 422 ms
The Build Log was empty.
Thank you in advance.
Best regards
Christoph

Automatic goods issue when the activity is confirmed not happening

Dear all,
I am facing one issue. I have attached a backflush item to the activity. The stock is also available for that material. But when i do the activity confirmation that material is not getting issued automatically.
Can anybody tell me what could be the reason.
Regards,
Sudhir Kesarkar

Thanks jibat,
As you suhggested i have checked in cogi. The error appearing there is 'Maintain valuation type'. This occured because the material is split valuated and we have to maintain the valuation type. But is there any way to automatically flow valuation type to the material attached to the activity.
Regards,
Sudhir

Error in the activation of the storage bins

Similar Messages

Maybe you are looking for