Error in the Address iview of ESS

Hello all
I am having problem with the address iview of ESS. The telephone no field is not being displayed in the edit mode of the iview i.e only the area code is being diaplyed and the rest of the no and the label is not there. From the previous thread I learnt that it might be because of some IMG customization but dont know how to solve it.
I will greatly appreciate if anyone can take some time to tell me how to fix this.
Thank you
renu

Hi sharadha
Thank you so much for responding.
Please send the document to [email protected]
Thank you
Renu

Similar Messages

  • Graphical errors. The Address dropdown box is blacked out, and goes normal when highlighted, tabs are blacked out, buttons are half missing etc etc. This ONLY happens in firefox, reinstalled and turn all add-ons off and it persists.

    Graphical errors. The Address dropdown box is blacked out, and goes normal when highlighted, tabs are blacked out, buttons are half missing etc etc. This ONLY happens in firefox, reinstalled and turn all add-ons off and it persists.

    '''''thedanbot''''':
    I am not sure that your image matches '''''Apoth's''''' description as I interpret it.
    Have you tried Firefox Safe Mode to see if an Add-on is causing your problem?
    #Use Firefox Safe Mode to find a problem with an Extension or Plugin:
    #*Don't check anything when entering Safe Mode, just continue
    #*If the problem does not occur in Safe Mode it is probably and Extension or Plugin causing the problem
    #*See:
    #**[[Safe Mode]] and [http://kb.mozillazine.org/Safe_Mode Safe Mode (Mozillazine)]
    #**[http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes Troubleshooting extensions and themes]
    #**[http://support.mozilla.com/en-US/kb/Troubleshooting+plugins Troubleshooting plugins]
    #**[http://support.mozilla.com/en-US/kb/Basic+Troubleshooting Basic Troubleshooting]

  • Error in Address Iview in ESS role

    Hi,
    I have assigned a PERNER to portal user in 105 infotype, that portal user contains only ESS/MSS roles and when i am going to
    personel information  -> Address iview it showing folloing error
    Read of object with ID portal_content/com.sap.pct/srvconfig/com.sap.pct.erp.srvconfig.ess.employee_self_service/com.sap.pct.erp.srvconfig.in/com.sap.pct.erp.srvconfig.addr/com.sap.pct.erp.srvconfig.fpmapplications/com.sap.pct.erp.srvconfig.per_address_in failed.:com.sap.xss.config.FPMConfigurationException: Read of object with ID portal_content/com.sap.pct/srvconfig/com.sap.pct.erp.srvconfig.ess.employee_self_service/com.sap.pct.erp.srvconfig.in/com.sap.pct.erp.srvconfig.addr/com.sap.pct.erp.srvconfig.fpmapplications/com.sap.pct.erp.srvconfig.per_address_in failed.
         at com.sap.xss.config.pcd.PcdObjectBroker.retrieveObjectInternal(PcdObjectBroker.java:92)
         at com.sap.xss.config.pcd.PcdObjectBroker.retrieveObject(PcdObjectBroker.java:47)
         at com.sap.xss.config.domain.PersistentObjectManager.retrieveObjectInternal(PersistentObjectManager.java:106)
         at com.sap.xss.config.domain.PersistentObjectManager.retrieveObject(PersistentObjectManager.java:80)
         at com.sap.xss.config.FPMRepository.retrieveObjectInternal(FPMRepository.java:83)
         at com.sap.xss.config.FPMRepository.retrieveObject(FPMRepository.java:66)
         at com.sap.pcuigp.xssutils.ccpcd.FcXssPcd.initializeConfiguration(FcXssPcd.java:816)
         at com.sap.pcuigp.xssutils.ccpcd.FcXssPcd.loadConfiguration(FcXssPcd.java:250)
         at com.sap.pcuigp.xssutils.ccpcd.wdp.InternalFcXssPcd.loadConfiguration(InternalFcXssPcd.java:178)
         at com.sap.pcuigp.xssutils.ccpcd.FcXssPcdInterface.loadConfiguration(FcXssPcdInterface.java:138)
         at com.sap.pcuigp.xssutils.ccpcd.wdp.InternalFcXssPcdInterface.loadConfiguration(InternalFcXssPcdInterface.java:148)
         at com.sap.pcuigp.xssutils.ccpcd.wdp.InternalFcXssPcdInterface$External.loadConfiguration(InternalFcXssPcdInterface.java:240)
         at com.sap.pcuigp.xssutils.ccpcd.CcXssPcd.loadConfiguration(CcXssPcd.java:282)
         at com.sap.pcuigp.xssutils.ccpcd.wdp.InternalCcXssPcd.loadConfiguration(InternalCcXssPcd.java:184)
         at com.sap.pcuigp.xssutils.ccpcd.CcXssPcdInterface.loadConfiguration(CcXssPcdInterface.java:115)
         at com.sap.pcuigp.xssutils.ccpcd.wdp.InternalCcXssPcdInterface.loadConfiguration(InternalCcXssPcdInterface.java:124)
         at com.sap.pcuigp.xssutils.ccpcd.wdp.InternalCcXssPcdInterface$External.loadConfiguration(InternalCcXssPcdInterface.java:184)
         at com.sap.xss.essservices.cc.ccesspcd.CcEssPcd.loadConfiguration(CcEssPcd.java:268)
         at com.sap.xss.essservices.cc.ccesspcd.wdp.InternalCcEssPcd.loadConfiguration(InternalCcEssPcd.java:169)
         at com.sap.xss.essservices.cc.ccesspcd.CcEssPcdInterface.loadConfiguration(CcEssPcdInterface.java:115)
         at com.sap.xss.essservices.cc.ccesspcd.wdp.InternalCcEssPcdInterface.loadConfiguration(InternalCcEssPcdInterface.java:124)
         at com.sap.xss.essservices.cc.ccesspcd.wdp.InternalCcEssPcdInterface$External.loadConfiguration(InternalCcEssPcdInterface.java:202)
         at com.sap.pcuigp.xssutils.ccxss.CcXss.loadConfiguration(CcXss.java:209)
         at com.sap.pcuigp.xssutils.ccxss.wdp.InternalCcXss.loadConfiguration(InternalCcXss.java:153)
         at com.sap.pcuigp.xssutils.ccxss.CcXssInterface.loadConfiguration(CcXssInterface.java:112)
         at com.sap.pcuigp.xssutils.ccxss.wdp.InternalCcXssInterface.loadConfiguration(InternalCcXssInterface.java:124)
         at com.sap.pcuigp.xssutils.ccxss.wdp.InternalCcXssInterface$External.loadConfiguration(InternalCcXssInterface.java:184)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:187)
         at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
         at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
         at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:754)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:289)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:733)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:668)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
         at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:860)
         at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:220)
         at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1289)
         at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:356)
         at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:549)
         at com.sap.portal.pb.PageBuilder.wdDoRefresh(PageBuilder.java:593)
         at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:865)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
         at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:319)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:684)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
    Caused by: com.sapportals.portal.pcd.gl.PermissionControlException: Access denied (Object(s): portal_content/com.sap.pct/srvconfig/com.sap.pct.erp.srvconfig.ess.employee_self_service/com.sap.pct.erp.srvconfig.in/com.sap.pct.erp.srvconfig.addr/com.sap.pct.erp.srvconfig.fpmapplications/com.sap.pct.erp.srvconfig.per_address_in)
         at com.sapportals.portal.pcd.gl.PcdFilterContext.filterLookup(PcdFilterContext.java:422)
         at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1248)
         at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1254)
         at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1254)
         at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1254)
         at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1254)
         at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1254)
         at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1254)
         at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1254)
         at com.sapportals.portal.pcd.gl.PcdProxyContext.proxyLookupLink(PcdProxyContext.java:1353)
         at com.sapportals.portal.pcd.gl.PcdProxyContext.proxyLookup(PcdProxyContext.java:1300)
         at com.sapportals.portal.pcd.gl.PcdProxyContext.lookup(PcdProxyContext.java:1067)
         at com.sapportals.portal.pcd.gl.PcdGlContext.lookup(PcdGlContext.java:72)
         at com.sapportals.portal.pcd.gl.PcdProxyContext.lookup(PcdProxyContext.java:1060)
         at com.sap.xss.config.pcd.PcdObjectBroker.getPcdContext(PcdObjectBroker.java:305)
         at com.sap.xss.config.pcd.PcdObjectBroker.retrieveObjectInternal(PcdObjectBroker.java:53)
         ... 74 more

    Hello,
    The error seems to look like a Permissions issue. Have you checked the Permissions assigned to the iView in the Permissions editor?
    Regards.
    Gopal.

  • ESS Error in standard Address iView (2004s)

    Hi All,
    NW2004s SP9
    The satandard Address application has a few errors am not sure if it is specific to our implementation as I did not find notes nor any SDN messages.
    In the address application the "Address Line 2" is greyed out and is just a display field even in edit mode.
    The phone number Label is not seen in the application. For the phone number just the area code is avialable for input and the 6 numbers plus the LAbel saying Telephone are not getting displayed.
    Its like
    Blank(Supposed to be Label "Telephone Number"      Area code(P0006-AREAC visible)  Blank(supposed to be P0006-TELNR}
    So its
    example
    Space ..... 716 Space
    when it should have been
    Telephone number   716 123456
    I have seen the web dynpro application source code and it does appear that the fields do exist and are in visible mode.
    The same was the case with address Line 2 field, it was visible and input field, but is just display field when the application is run.
    Did anyone face this issue???
    regards
    Sam

    Shardha,
    Thanks a lot for offering to help me out. my email id is
    [email protected] / [email protected]
    regards
    Sammer
    Message was edited by:
            sameer chilama

  • "SAP_PAYSLIP_US does not exist" error in Salary statement iView of ESS

    Hi all,
    We have SAP EP7.0 (NW 2004s) with the ESS business package for MySAPERP 2005.Most of our iViews of the business package are working fine,but some are givig problems.
    When we try to launch the Salary Statement iView under BEnefits and Payments Workset we get the "SAP_PAYSLIP_US does not exist" error.
    The form name SAP_PAYSLIP_US is active and also we have specified the form name in the SPRO settings.
    If we change the form name (for e.g.UF01) then the error displayed is "UF01 does not exist".
    Can anyone point out as to what the problem is.
    Is there any settings we are missing?
    Thanks,
    Pradeep Shetty

    Hi To all!
    The Form SAP_TIMESLIP doesn't exist. The correct form to use in the feature HRFOR is SAP_TIM_99_0001 or SAP_TIM_99_0002.
    Activate the form in transaction HRFORMS.
    SAP didn't release the form SAP_TIMESLIP.
    Hope this information is usefull.
    Sónia

  • Why are internal pages giving the error message "The address isn't valid" (New tab and session restore)?

    Upon restarting firefox today, I was met not with the usual session restore page to which I have grown so accustomed, but an error page stating:
    "The address isn't valid
    The URL is not valid and cannot be loaded.
    Web addresses are usually written like http://www.example.com/
    Make sure that you're using forward slashes (i.e. /)."
    This also appears when I open a new tab. I've lost all of former tabs (of which I had a TON) and my easy access to my most visited sites that new tab usually gives me. Manually punching in about:sessionrestore, about:welcomeback or about:newtab all give this same error message.
    I've already tried restarting in safe mode, and have reset firefox through the troubleshooting page- neither helped in the slightest. In fact, I "fixed" the about:newtab by changing it to :blank instead, and that got reverted in the Reset. Did the most recent update change how the internal pages are handled or something?
    I'd like to fix things back to how they're supposed to be. I end up having to reset Firefox about 5 times a day whenever it gets greedy with my memory, which has never been more than a minor annoyance thanks to the good system restore. But if I can't repair this then it may be time to move on.
    Any ideas?

    Hi.
    I stated in my initial question that I already went through safe mode (and had also tried the theme thing), but regardless, I have tried again. No dice. They're still not fixing the problem.

  • How do I fix this error message, The address wasn't understood Firefox doesn't know how to open this address, because one of the following protocols (connectag

    We have a new computer and I cannot get my garmin running watch to sync with mozilla. The error message that I keep getting is"The address wasn't understood
    Firefox doesn't know how to open this address, because one of the following protocols (connectagent) isn't associated with any program or is not allowed in this context.
    You might need to install other software to open this address."
    Help please

    This is for a special URL that starts with
    connectagent://
    instead of with
    http://
    is that right?
    Two thoughts:
    (1) Could you try changing a setting for your Garmin plugin. Here's what I mean:
    Open the Add-ons page using either:
    * Ctrl+Shift+a
    * orange Firefox button (or Tools menu) > Add-ons
    In the left column, click Plugins.
    Find your Garmin plugin change "Ask to Activate" to "Always Activate".
    Your system information seems to list two different versions of a similarly named plugin. I'm not sure whether that is causing a problem.
    (2) Does Garmin's documentation specify any extra steps to set up Firefox, other than installing its add-ons?

  • When I go into outlook I and hit a new message and hit th "To" button, I get the following error message:  The address list cannot be displayed.  The contacts folder associated with this address list could not be opened; it may have been moved or deleted,

    to continue:  For information on how to remove this folder from the Outlook Address book, see MSOffice Outlook help.  I also get an error message when I go to tools and hit the address book there.  This crap is frustrating!

    Hi,
    Based on your description, I suspect that your proxy is in internet zone by default, so it cannot use credential
    which has been recorded in window credential management. I suggest that we add
    proxy server into “Local Intranet” zone via GPO to see if it can solve your problem.
    Let me know if it works for you. Thank you.

  • Error Runging the Transaction iview using SSO logon ticket

    Hi I am getting the follwoing error  in log file. when i am running the Transaction iview using SAP Loggon ticket.
    #1.5 #005056A33F2000840000000500000600000456BC1060683F#1221265635404#com.sap.security.core.umap.imp.UserMappingDataImp#sap.com/irj#com.sap.security.core.umap.imp.UserMappingDataImp.getAuthenticationTicket()#Guest#0##n/a##28a92320812111ddb972005056a33f20#Thread[UWL Pooled Thread:2,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Error#1#/System/Security/Usermanagement#Java###The attribute "" of the backend system with alias "" has the invalid value "".
    Cannot generate an SAP authentication assertion ticket for user and the specified backend system.
    Please adjust the value of the system attribute. Supported values are "" and "".#6#AuthenticationTicketType#"KPMGVM005_ALIAS"##"Stokkeland, Pauline" (unique ID: "USER.PRIVATE_DATASOURCE.un:P00024384")#SAP Logon Ticket#SAP Assertion Ticket#
    I have imported the .der file of the portal in to the SAP ECC sytem.using STRUSTSSO2
    Created the profile parameters using rz10 trnsaction.
    login/create_sso2_ticket
    login/accept_sso2_ticket
    restarted the ECC system.
    Created the system object using the follwoing parameters
    WAS
    Connector
    Usermanagement
    Under usermanagement
    Authentication Ticket Type - SAP Logon TicketSAP 
    Logon Method -SAPLOGONTICKET 
    User Mapping Fields  :<not selected>
    User Mapping Type    :<not selected>
    when i test the sytem object under connection test:showing the following error.
    Test Details:
    The test consists of the following steps:
    1. Retrieve the default alias of the system
    2. Check the connection to the backend application using the connector defined in this system object
      Results
    Retrieval of default alias successful
    Connection failed. Make sure that Single Sign-On is configured correctly
    But WAS, ITS, Connector are successfull. but above message is showing.
    what could be the problem.
    When i run one transaction iview with this system it is showing following error.
    com.sap.portal.appintegrator.sap.Transaction::Transaction/WebGuiSSOITS640Layer
    Parameter Dump
    $DebugAction  
    $TimeStamp  1221268987126
    ALLOW_BROWSER  Yes
    Alias  
    ApplicationParameter  
    ApplicationVariants  GuiType
    AuthScheme  default
    Authentication  ******
    AutoStart  false
    CachingLevel  
    ClassName  com.sapportals.portal.appintegrator.layer.SingleSignOnLayer
    ClientWindowID  
    CodeLink  com.sap.portal.appintegrator.sap.Transaction
    CommandField  YTIME
    CurrentWindowId  WID1221260007272
    CustomerExit.ParameterProvider  
    DR.TargetIDPropertyName  TCode
    DebugMode  false
    DynamicParameter  
    DynproFields  
    ExecutionLocation  KPMGVM005_ALIAS
    ExportParameters  Authentication, LogonUser, RequestMethod
    FederationAlias  
    ForcedRequestLanguage  
    ForwardParameters  
    ForwardParameters.Always  sap-config-mode
    ForwardParameters.Excluded  
    ForwardParameters.Forbidden  ClientWindowID, Command, DebugSet, DynamicParameter, Embedded, InitialNodeFirstLevel, SerAttrKeyString, SerKeyString, SerPropString, SessionKeysAvailable, iview_id, iview_mode, windowId, sap-pp-producerid, sap-pp-consumerBaseURL, sap-pp-returnToConsumer, login_submit, j_user, j_password, j_authscheme, uidPasswordLogon, MappedUser, MappedPassword
    GUSID  
    GuiType  WebGui
    GuiType.default  WebGui
    ITSVersion  640
    JREPluginDownloadLocation  
    JREPluginMimeType  application/x-java-applet;version=1.4.1_02
    JavaGuiCodeBase  
    JavaGuiTraceFile  
    JavaGuiTraceKey  
    LAF  
    LoadingCacheKey  <Portal.Version><LAF.Theme>
    LogonMethod  SAPLOGONTICKET
    MandatoryParameters  System
    NavMode  1
    NavigationTarget  navurl://21635c17e11df05c58e1c07deaf5bed1
    NextLayer  Transaction/WebGuiESIDLayer
    OkCode  
    OkCodeField  
    OptionalParameters  
    ParameterTemplate  <ApplicationParameter[PROCESS_RECURSIVE]>;<ForwardParameters[QUERYSTRING]>;<DynamicParameter[PROCESS_RECURSIVE]>;
    Portal  
    ProducerLocation  Remote
    REFRESH_CONTENT  -1
    ReuseWinguiConnection  false
    RoundtripURL  
    SSO2Template  
    SessionManagementVersion  
    SupportedUserAgents  (MSIE, >=5.5, *) (Netscape, *, ) (Mozilla,,*)
    SupportsUnicodeCodePages  false
    System  KPMGVM005_ALIAS
    System.type  lookup:com.sapportals.portal.appintegrator.lookup.SystemLookup
    TCode  YTIME
    Technique  Standard
    TopLayer  Transaction/DragAndRelateLayer
    Transactions_Require_SSF  RRMX,RRMXP
    URL  
    UnsupportedUserAgents  
    UseFrog  true
    UseSPO1  false
    UserMappingTemplate  sap-user=<MappedUser>&sap-password=<MappedPassword>
    ValidityPeriod  -1
    Wizard.ApplicationVariantPane.Description  
    Wizard.ApplicationVariantPane.Title  
    Wizard.MandatoryParameters  System, TCode, GuiType
    Wizard.OptionalParameters  ApplicationParameter, UseFrog, Technique
    Wizard.ParameterPane.Description  
    Wizard.ParameterPane.Title  
    X509Template  
    com.sap.application_integration.ConfigurationServiceID  Transaction_Configuration
    com.sap.portal.ComponentType  com.sapportals.portal.iview
    com.sap.portal.activityreport.MonitorHits  true
    com.sap.portal.admin.propertyeditor.categoryName  
    com.sap.portal.iview.AccessibilitySupport  
    com.sap.portal.iview.Availability  VISIBLE
    com.sap.portal.iview.DisableChildrenDYN  
    com.sap.portal.iview.DisableChildrenRL  
    com.sap.portal.iview.DisableChildrenTC  
    com.sap.portal.iview.DragAndRelate  false
    com.sap.portal.iview.ExpansionMode  Open
    com.sap.portal.iview.HasContentPadding  true
    com.sap.portal.iview.Height  80
    com.sap.portal.iview.HeightScale  PIXELS
    com.sap.portal.iview.HeightType  FIXED
    com.sap.portal.iview.HelpURL  
    com.sap.portal.iview.IsTemplate  false
    com.sap.portal.iview.MainObject  
    com.sap.portal.iview.MaxAutoHeight  1000
    com.sap.portal.iview.MinAutoHeight  0
    com.sap.portal.iview.SMiViewURL  com.sap.portal.epsolman.EPSolman
    com.sap.portal.iview.ShowDetails  true
    com.sap.portal.iview.ShowExpand  true
    com.sap.portal.iview.ShowHelp  false
    com.sap.portal.iview.ShowMinimize  true
    com.sap.portal.iview.ShowPersonalize  true
    com.sap.portal.iview.ShowRefresh  false
    com.sap.portal.iview.ShowRemove  true
    com.sap.portal.iview.ShowSMiView  false
    com.sap.portal.iview.ShowTitle  true
    com.sap.portal.iview.ShowTray  true
    com.sap.portal.iview.TitleURL  
    com.sap.portal.iview.TrayType  PLAIN
    com.sap.portal.iview.Width  400
    com.sap.portal.iview.WidthScale  PIXELS
    com.sap.portal.iview.WidthType  FIXED
    com.sap.portal.iview.family  
    com.sap.portal.navigation.DragRelate  0
    com.sap.portal.navigation.ExtWindowHeight  710
    com.sap.portal.navigation.ExtWindowWidth  1014
    com.sap.portal.navigation.Invisible  false
    com.sap.portal.navigation.JScript  
    com.sap.portal.navigation.MergeId  
    com.sap.portal.navigation.MergePriority  100.0
    com.sap.portal.navigation.Mergible  true
    com.sap.portal.navigation.NavigationHierarchyMetadata  Cacheable
    com.sap.portal.navigation.Priority  100.0
    com.sap.portal.navigation.QuickLink  
    com.sap.portal.navigation.ShowAddToFavorites  true
    com.sap.portal.navigation.ShowType  1
    com.sap.portal.navigation.WindowName  
    com.sap.portal.navigation.view  
    com.sap.portal.pcd.gl.Collection  IP_PTL_INITIAL_CONTENT
    com.sap.portal.pcd.gl.CreatedAt  Sat Sep 22 11:32:17 EDT 2007
    com.sap.portal.pcd.gl.CreatedBy  Administrator
    com.sap.portal.pcd.gl.DeltaLinkState  -1
    com.sap.portal.pcd.gl.Domain  EP
    com.sap.portal.pcd.gl.LastChangedAt  Fri Sep 12 19:24:19 EDT 2008
    com.sap.portal.pcd.gl.LastChangedBy  ksingh
    com.sap.portal.pcd.gl.ObjectClass  com.sapportals.portal.iview
    com.sap.portal.pcd.gl.OriginalCountry  
    com.sap.portal.pcd.gl.OriginalLanguage  en
    com.sap.portal.pcd.gl.Responsible  Administrator
    com.sap.portal.pcd.gl.TransportDependencies  pcd:com.sap.portal.system/archives/com.sap.portal.appintegrator.sap.par
    com.sap.portal.pcd.role.EntryPoint  false
    com.sap.portal.pcm.Description  VRB_com.sap.portal.pcm.Description
    com.sap.portal.pcm.Title  myTime
    com.sap.portal.pcm.admin.Capabilities  com.sap.portal.capability.delete,com.sap.portal.capability.link,com.sap.portal.capability.copy,com.sap.portal.capability.edit,com.sap.portal.capability.cut,com.sap.portal.capability.transportable,com.sap.portal.capability.launch,com.sap.portal.capability.editpermissions
    com.sap.portal.pcm.admin.UseDefaultCapabilities  true
    com.sap.portal.private.iview.PropertiesUrl  pcd:com.sap.portal.system/applications/com.sap.portal.appintegrator.sap/components/Transaction
    com.sap.portal.reserved.iview.ButtonsURL  
    com.sap.portal.reserved.iview.EditorURL  pcd:portal_content/com.sap.pct/admin.templates/iviews/editors/com.sap.portal.pcmEditor
    com.sap.portal.reserved.iview.IconName  
    com.sap.portal.reserved.iview.IsolationMode  URL
    com.sap.portal.reserved.iview.NavPanelStatus  Automatic
    com.sap.portal.reserved.iview.ParamList  *
    com.sap.portal.reserved.iview.WizardURL  com.sap.portal.appintegrator.iViewWizard
    com.sap.portal.workDistributionTopic  
    com.sapportals.portal.navigation.FolderEntry  false
    com.sapportals.portal.navigation.Pictogram  
    com.sapportals.portal.navigation.WinFeatures  resizable=yes,toolbar=no,menubar=no
    propertyIdMapping  
    com.sap.portal.appintegrator.sap.Transaction::Transaction/WebGuiSSOITS640Layer
    MandatoryParameters
    System   SAP_LocalSystem KPMGSBBW_alis KPMGVM005_ALIAS SAP_BW SAP_CRM SAP_ECC SAP_RPM SAP_WEBDYNPRO_CRM_ALIAS TestECC_Alias Test_CRM_Alias WebEx XBICLNT100 XCRCLNT100 XECCLNT100 
    Is it required to add  ECC certificate to Portal sytem?
    we have created the same user id in both the sytems.
    Please let me know what could be the error.
    Regards

    Vijay,
    Please follow these steps and lemme know what you observe.
    Go to system administration->support->sap application-> under test and configuration tools choose sap transaction
    under the mandatory fields choose the system that you have created, choose a tcode (se16) and choose sap gui for windows and click go.
    If you are able to logon to your ecc system, your sso works!
    P.S Make sure the user name with which you are testing this, exists in the backend as well.
    Good luck
    Cheers,
    Sandeep Tudumu

  • 'exception thrown but not caught' error on the url iview

    Hi,
    EP6, we have url iview that is working fine for displaying a web application. but the problem is some of the link on the web application throws 'exception thrown but not caught' error. it happens to some of the users though.

    Hi Mokone
    I agree with Raghvendranath statement.
    This is not portal side problem.U just using URL of that application
    Also do this
    Open the URLiView editor and check the Fetch Mode property value.
        Launch the same URL in a new browser window (not in the portal).
        Change the URLiView Fetch Mode property from Server-Side to Client-Side.
        The iView is using the Server-side fetching mode but no proxy is defined for the portal
    Hope this info help you
    Regards
    Ruturaj

  • Error in Previous Employeer Iview in ESS

    Hi All,
    I am facing  this error when i am modifying the View for maintaining previous employeer data.
    I changed the Use case type B3 to B4. in the infotype 0023.
    I changed this details in the Table T7XSSPERSUBTYPE.
    so after changing the data i am getting the following error:
    The ASSERT condition was violated., error key: RFC_ERROR_SYSTEM_FAILURE
    so any inputs will be highly appreciated.
    Regards,
    Dhruv Shah

    Dhruv,
    check these links
    https://forums.sdn.sap.com/click.jspa?searchID=17432166&messageID=6143098
    https://forums.sdn.sap.com/click.jspa?searchID=17432166&messageID=5791687
    Thanks
    Bala Duvvuri

  • Critical Error in ESS Addresses iView

    Getting the following error message when running the Address iView for employees
    Read of object with ID portal_content/com.sap.pct/srvconfig/com.sap.pct.erp.srvconfig.ess.employee_self_service/com.sap.pct.erp.srvconfig.uk/com.sap.pct.erp.srvconfig.addr/com.sap.pct.erp.srvconfig.fpmapplications/com.sap.pct.erp.srvconfig.per_address_gb failed.

    Ashutosh is correct,
    This location in your PCD portal_content/com.sap.pct/srvconfig requires additional permissions to be set.
    Depending on how you want to go about this - you could start by assigning the Authenticated Users group to this directory.  Dont forget to reset all the child permissions to force the permissions down the tree.
    Haydn

  • Problems with the postal code in address iview ESS.

    I would greatly appreciate if someone answer this threat. I am having this big problem with the address iview. It is not possible to change the postal code in the address iview.

    Can you explain the issue? Means for which country this issue is coming. We faced similar issue. There is some bug in ESS/MSS package itself. You send me details of issue at [email protected] I will reply you back with OSS message answered by SAP if that is a bug.

  • ESS: "WDDynamicRFCExecuteException" received when previewign Address iView.

    Hi
    We are starting to configure ESS portals on EP 7.0 to connect to ECC 6.0 system. While trying to check the connectivity from Portal to R/3 - SSO works fine.
    However, the Address iView when displayed gives the following error;
    The initial exception that caused the request to fail, was:
       com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Access via NULL object reference not possible., error key: RFC_ERROR_SYSTEM_FAILURE
        at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:102)
        at com.sap.xss.per.fc.persinfo.FcPersInfo.onCleanup(FcPersInfo.java:618)
        at com.sap.xss.per.fc.persinfo.wdp.InternalFcPersInfo.onCleanup(InternalFcPersInfo.java:807)
        at com.sap.xss.per.fc.persinfo.FcPersInfoInterface.onCleanup(FcPersInfoInterface.java:246)
        at com.sap.xss.per.fc.persinfo.wdp.InternalFcPersInfoInterface.onCleanup(InternalFcPersInfoInterface.java:299)
    devjrfc.trc_           .      
    Error> occured [5] >Mon Nov 10 15:32:46,624<   
    RfcException:
        message: CPIC-CALL: CMRCV on convId: 89901816
    LOCATION    CPIC (TCP/IP) on local host with Unicode
    ERROR       connection to partner '172.16.6.11:sapgw00' broken
    TIME        Mon Nov 10 15:32:46 2008
    RELEASE     700
    COMPONENT   NI (network interface)
    VERSION     38
    RC          -6
    MODULE      nixxi.cpp
    LINE        3948
    DETAIL      NiIWrite
    SYSTEM CALL WSASend
    ERRNO       10054
    ERRNO TEXT  WSAECONNRESET: Connection reset by peer
    COUNTER     3
        Return code: RFC_SYS_EXCEPTION(3)
        error group: 102
        key: RFCERROR_COMMUNICATION_
    Error> occured  >Mon Nov 10 15:32:47,139<    >RfcGetException rc (7) message: Access via 'NULL' object reference not possible.
    <RfcGetException
    u201D
    Here is the ST22 dump of the error on the ABAP system.
    u201CRuntime Errors         OBJECTS_OBJREF_NOT_ASSIGNED_NO                              
    Exception              CX_SY_REF_IS_INITIAL                                        
    Date and Time          11/10/2008 15:32:46                                                                               
    An exception occurred that is explained in detail below.                      
         The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not     
          caught in                                                                    
         procedure "HRXSS_PER_CLEANUP" "(FUNCTION)", nor was it propagated by a RAISING
          clause.                                                                      
         Since the caller of the procedure could not have anticipated that the         
         exception would occur, the current program is terminated.                     
         The reason for the exception is:                                              
         You attempted to use a 'NULL' object reference (points to 'nothing')          
         access a component.                                                           
         An object reference must point to an object (an instance of a class)          
         before it can be used to access components.                                   
         Either the reference was never set or it was set to 'NULL' using the          
         CLEAR statement.                                                                               
    How to correct the error                                                          
         Probably the only way to eliminate the error is to correct the program.                                                                               
    If the error occures in a non-modified SAP program, you may be able to        
         find an interim solution in an SAP Note.                                      
         If you have access to SAP Notes, carry out a search with the following        
         keywords:                                                                               
    "OBJECTS_OBJREF_NOT_ASSIGNED_NO" "CX_SY_REF_IS_INITIAL"                       
         "SAPLHRXSS_PER_MAC" or "LHRXSS_PER_MACU04"                                    
         "HRXSS_PER_CLEANUP"   u201D
    Has anyone else faced this error? Can you please suggest me a solution?
    Thanks,
    Raza.

    Hi Guys -
    I found the resoution to this problem myself..
    We had our ERP5COM @ SP 14 while all the other components ERP5ESS, ERP5MSS, etc were at a lower level ie SP 13.
    So, by downgrading the above component we could Preview the iViews.
    I am closing this post.
    Thanks,
    Raza.

  • Address iView not getting displayed in ESS

    Hello Everyone,
    When I am logging into ESS with an User of SAP systen, I am unable to see the Address iView of the corresponding employee to whom the user is assigned.A number of iViews is getting displayed for different countries but I am unable to get the iView which I am looking for.Even when I am clicking on the iViews which are getting displayed no data is getting displayed.I am using country grouping 40 i.e India.I have also set the parameter in the User profile(UGR 40 and UCN IN).
    Also for some of the links, when I click them the page is getting refreshed continuously without any display.Bu twhen I am tyring the view the same using the PZ screens it is coming properly.
    Please let me know what settings are required to get the proper iView.
    With Regards,
    Kaustuv Goswami.

    Hi Kaustav,
    Go to the portal->content administration->webdynpro and see in the left pane where all the deployed applictions will get displayed.You can chekc the same thru SDM also.
      For deployment, you can download the .SCA file from the service market place and deploy it thru SDM.
    Regards,
    Sharadha

Maybe you are looking for

  • Is there any way to print wirelessly using Airport Extreme with an older printer (HP Laserjet 2100 TN) - no USB connection.

    I have an older printer and currently use a Cisco wireless router with Network Magic software which allows me to leave my 30 pin printer connected to the desktop computer and share the printer with everything on the network. Does the Airport Extreme

  • License key won't "stick"

    Hi, I'm administering a Contribute site for about 20 users. I installed and licensed all of my authors' copies of 3.0 without incident with one exception: one user's license key won't "stick"--she's prompted for the license number every time she open

  • Message tracking display and reporting

    Hi, I am newish to the email appliance. We have a c370. I am told we need reports daily detailing each email address leaving the ironport each day. If we could also see the sending address that would be great. message tracking seems to have this info

  • Java server does not start; config tool

    Hi All, I am fairly new to SAP BASIS setup. I have installed IDES ECC 6.0 on Oracle(Win2003 as a guest on VMWare). At the time of installation the install program installed a part of the Oracle database files on an external harddisk. The ABAP server

  • Replication with Domain and Sub domain in Active directory sites and services

    I seen many AD enviroments and know that when you have mutiple DCs you use Active Directory Sites and services to replicate using the NTDS Settings. If you have a Domain and sub domain do you need to do this as well or does it sync up automatically b