Error in the Business  content  update rules

hi all,
       I have collected the update rule(0SD_C03<--2LIS_11_VAHDR)  from the business content.When i am trying to install it is popping an error for the update rule.
The error is
     Object UPDR 250Q6ZPVU4292O59V2VXSY5CA could not be found in version M.
*     ObjectUpdaterules250Q6ZPVU4292O59V2VXSY5CA: Error installing the Content version*.
Can anyone give the solution for this issue.Points will be awarded.
thanks
Satish

Hi,
Try creating manually the update rule.
Regards
Rahul Bindroo

Similar Messages

  • Error when installing the business content (update rules)

    Hi Gurus,
    I am trying to install the Business Content for Plant Maintenance. When trying to install the update rules UPDR BN10TVY8N84KARHU2FLSSYL56, I was able to see the update rules in the collected objects. But, when trying to install, it throws an error saying that the update rules is not found.
    Could you please help me in resolving the issue and install the update rules successfully.
    Thanks,
    Regards,
    -R

    You should install corresponding neccessary object with it, like update rule data target, and connected infosources also.
    infosource -> update rules -> data target
    Cross check you have infosoure, and data target installed or not, and if not install all these together.
    You can also use grouping option as install all neccesary options. It will collect all neccessary objects.

  • Error installing business content update rules

    Hi,
    I'm trying to install the below updates rules from the business content
    0PLANT$T 0PLANT_TEXT      53AFFWD74OI3CT3RDE3RI9THU
    0PLANT 0PLANT_ATTR         5UZVD7UWYN4T81H24YBKGH6KY
    I get the error
    IC=0PLANT$T IS=0PLANT_TEXT syntax error:  rows 0
    Long Text:
    IC=0PLANT$T IS=0PLANT_TEXT syntax error:  rows 0
    Message no. RSAU466
    Diagnosis
    When generating the update program for InfoProvider 0PLANT$T, InfoSource 0PLANT_TEXT, a syntax error in line 0.
    System Response
    The update rules cannot be activated.
    Procedure
    If error message :
    is cut off, proceed as follows to get the complete complete error message:
    Go into update rule maintenance, choose Extras -> Display Activated Program and perform a syntax check. This allows you to find out what the error is.
    If I select the Display Activated Program it says does not exist.
    Can anyone help me figure out this issue?
    Thanks

    We are currently on SAP EHP 1 for SAP NetWeaver 7.0
    SAP_BW Release 701 Support Package SAPKW70107
    BI_CONT Release 705 Support Package SAPK-70501INBICONT

  • Error in Activating the Business Content Infocube 0CRM_C08

    Hi Experts,
    when iam trying to activating the business content infocube 0CRM_C08
    iam getting few errors
    Error-1:- Characteristic 0COUNTY_CDE is still being used as target of transfer rule ZCOUNTY_TEXT
    Error-2:- Char. 0CRM_OBTYP3 is exclusively an attribute (cannot be a navigation attribute)
    Error-3:- Authorization field CRM_SALORG still being used in authorization objects
    Error-4:- Cannot delete authorization field of InfoObject 0CRM_SALORG
    Error-5:- InfoObject ZDGTDCODE is used in transfer rules (1CL_OMAT001_BB) of characteristic 0MATERIA
    Can anyone please clarify regarding these kind of errors.
    What i have to do for make a successfull activation
    Thanks in Advance
    ARUN

    Hi Raj,
    I have searched for those objects in the BI content for activating those objects, but those objects are not available in the BI content.
    In general while activating the info cube if any object is in inactive means we will activate the object seperatly and we will activate the info cube it will resolve the issue. but here those 0DB-- objects are not available in the BI content.
    While activating the sales and inventory info cube it was throughing the short dump, In the short dump it is showing these message.
    ASSIGN_LENGTH_0 " "
    SAPLSNR3 or "LSNR3F01"
    LOCAL_BUFFER
    please treat this as urgent.
    Thanks
    Prabhakar.

  • Error while activating the business content object

    Hi guru,
    We have installed a new BI system, and hence we need to activate all the business content object as they are available in delivery version.
    So as there was an requirement i tryed to activate the business content object ,that is 0mat (MATNR) material number,
    but once done with the installation when i try to find the object and display it
    that is i select the object 0mat , context menu and say display or change it does not show the complete screen as it appears for a characterstic and gives a error
    "_settings for material number conversion not found"_*
    so please help me out what is the problem
    Thanks

    Thanks Subash Balakrishnan for replying,
    but let me inform you that i already did that as i need to install this object and now the object is showing with green instead of grey,
    Now my problem is that after selecting grouping and collection when i go to infoobject menu under modelling and find out the object 0mat, it shows in green , but as i need to observe the properties of this object like data type , length etc , i select the object 0mat and right click and select display,
    then instead of showing me the object properties screen it gives me the error as mentioned above,
    so as you say it has to be in active versoin , but i can not view the normal screen which appears after creating any object ,
    now i hope my problem is quiet explanatory so please help me.
    Thanks

  • Error while activating the Business Content

    Hi BI gurus,
    I am installing the business content for the sales overview infocube with the grouping option data flow before and install in back ground option. The back ground job is cancelled with the error msg"STDO: Log could not be written on output device T" and at the end it shows ABAP/4 processor: LOAD_PROGRAM_LOST error.
    Can any one give solution for this. This is very urgent,
    With Regards,
    Balachander.S

    And also check whether there are any dumps in ST22.
    Khaja

  • ERROR while activating the Business Content of Sales Cube 0SD_C03

    Hi,
    iam facing an error, iam getting the  error while activating the Business Content sales info cube and Inventory info cube with the collection option DATA FLOW BEFORE. In my system the service pack was 14, what shall be the approach. Here iam getting the error like some 0DB--  objects are not available in the D version. if u have any solution for this please share with use also.
    Please treat this as an urgent, because we are unable to proceed with the further Business Content Activation.
    Thanks,
    Prabhakar.

    Hi Raj,
    I have searched for those objects in the BI content for activating those objects, but those objects are not available in the BI content.
    In general while activating the info cube if any object is in inactive means we will activate the object seperatly and we will activate the info cube it will resolve the issue. but here those 0DB-- objects are not available in the BI content.
    While activating the sales and inventory info cube it was throughing the short dump, In the short dump it is showing these message.
    ASSIGN_LENGTH_0 " "
    SAPLSNR3 or "LSNR3F01"
    LOCAL_BUFFER
    please treat this as urgent.
    Thanks
    Prabhakar.

  • Errors while transporting the Business Content

    hi all,
    we are facing a few problems while transporting the Business Content from the Development systems to the Quality System.
    it says Method Execution - Action Cancelled.
    am pasting a part of the error messages also... kindly have a look at it and get back to us at the earliest as we are in the process of going-live...
       Start of the after-import method for object type R3TR IOBJ (Activation Mode)            
       Interval 01 of number range RS_OBJNUMG is missing   > Long text                         
       Interval 01 of number range RS_OBJNUMG is missing   > Long text                         
       Interval 01 of number range RS_OBJNUMG is missing   > Long text                         
       Interval 01 of number range RS_OBJNUMG is missing   > Long text                         
       Interval 01 of number range RS_OBJNUMG is missing   > Long text                         
       Interval 01 of number range RS_OBJNUMG is missing   > Long text                         
       Interval 01 of number range RS_OBJNUMG is missing   > Long text                         
       Interval 01 of number range RS_OBJNUMG is missing   > Long text                         
       Interval 01 of number range RS_OBJNUMG is missing   > Long text                         
       Interval 01 of number range RS_OBJNUMG is missing   > Long text                         
       Interval 01 of number range RS_OBJNUMG is missing   > Long text                         
       InfoObject 0ACN_CATGRY (in compound of characteristic 0ACN_EANUPC) not (act.) available 
       Attribute 0ACN_BRAND from characteristic 0ACN_EANUPC not (actively) available           
       Attribute 0ACN_DEAL from characteristic 0ACN_EANUPC not (actively) available            
       Attribute 0ACN_BRAND from characteristic 0ACN_EANUPC not (actively) available           
    Errors occurred during post-handling RS_AFTER_IMPORT for UPDR L                
    The errors affect the following components:                                    
        BW-WHM (Warehouse Management)                                               
    Ended with return code:  ===> 12 <===              
    please revert bact at the earliest....
    Thanks
    Manicks

    hi Manicks,
    check if oss note 903291 helps
    Transporting DataSources
    Transport problem ...Urgent
    Transport Issue
    Number range object missing NRIV and cant activate IOBJ during import
    try transaction rsrv ? >> all elementry tests >> master data >> compare number range and maximum sid >> execute. press button 'correct error' if any error exists.
    also try >> all combined tests >> master data >> check master data for characteristics.
    or run program RSDG_OBJNUMG_CREATE_INTERVAL
    have a try oss note 903291 ?
    Manual solution
    Get the name of the number range object from the error message shown above, for example, RS_OBJNUMG. Start Transaction SNRO. To display the intervals, use the number range function key and enter the name of the number range object as the object name. Change the intervals. The following from-numbers and to-numbers apply:
    - RS_OBJNUMG: 0000001 - 9999000
    - RSDDAGCUBE: 100000 - 199999
    - RSSBRAUTH: 00000001 - 99999999
    BW 3.0B
    Import Support Package 30 for 3.0B
    BW 3.10 Content
    Import Support Package 24
    BW 3.50
    Import Support Package 16
    BW 7.0
    Import Support Package 07

  • Error in Installing the Business Content for 2LIS_06_INV data source

    Hi Experts,
    We are trying to install the Business content for 2lis_06_inv. When we replicate the datasource, we are not seeing it in 3.x version. It is only vailable in 7 version. There is no transformation available in Business content for this data source. Please let me know how we need to proceed with this installation. Should we install the 7.0 flow or 3.x flow? Please provide th details if you have implemented th same in your system. Thanks is advance.
    Regards,
    Kavitha Jagannath

    Hi,
    Follow bellow steps:
    1. Goto RSA1.
    2. Select the BI content.
    3. Select the Grouping as' In Dataflow before and after'
    Then,you can get the data flow which are haveing the DS/TR/Data targets.
    4. Select the Install by setting the 'Install in background'.
    Regards.

  • Error in Activating Business Content in SPP

    When we tried to Activate the business content for SAP SPP(using RSA1), We received the ABAP runtime error - OBJECTS_OBJREF_NOT_ASSIGNED. The error message is as follows.
    Error in the ABAP Application Program                                                                                The current ABAP program "CL_RSD_IOBJ_VERS==============CP" had to be  terminated because it has come across a statement that unfortunately cannot be executed.
    Any suggestions how to rectify this?

    Thanks for the update. It helped. We could transfer and istall the required infoobjects, infosources and infoareas.
    We could also transfer the update rules, but the tansferred and installed 'update rule' is being shown as 'inactive, not executable'. Any idea how to fix this?
    Thanks,
    Prashanth

  • Error when transporting a transformation (Update rule) BI 7.0

    Error when transporting a transformation (Update rule) BI 7.0
    Hi all,
    I’m trying to transport the transformation between the infocube 0FIGL_C10 and the ODS 0FIGL_010 from BI Dev into BI QAS. I kept getting a return code 12.
    Transport message:
       Program terminated (job: RDDEXECL, no.: 18141700)
       See job log
       Execution of programs after import (XPRA)
       End date and time: 20070620181432
    I go to the log and I got the following message:
    Job started
    Step 001 started (program RDDEXECL, variant, user ID DDIC)
    All DB buffers of application server vrxsapq1 were synchronized
    ABAP/4 processor: ASSERTION_FAILED
    Job cancelled
    I’m using BI 7.0
    I don’t know what it is. Can someone tell what should I do or what I’m missing?
    Thanks a lot
    Regards
    Vic

    Hi Victor,
    check this thread may it solves your problem
    Re: Error during the creation of transport request
    one more thread
    /message/2785863#2785863 [original link is broken]
    cheers
    Sunil
    Message was edited by:
            Sunil John

  • How to install the Business Content Cube 0PP_C02

    Hello,
      Can you please explain me how to install the Business Content Cube 0PP_C02 .
    What are the nesessary steps involved in this process. How this Standard Cube is available in
    AWB -> Modeling.
    What are the nesessary steps involved in the R/3 side.
    CAn you please help me in this.
    Thanks alot.
    Regards,
    Anitha

    Hi anitha
    TRy this
    To transfer and activate a DataSource delivered by SAP with Business Content, in transaction SBIW in the source system choose Business Information Warehouse à Business Content DataSources or Activating SAP Business Content àTransfer Business Content DataSources.
    The following figure displays the DataSources in an overview according to the application component.
           2.      Select the nodes in the application component hierarchy for which you want to transfer DataSources into the active version. Do so by positioning the cursor on the node and choosing Highlight Subtree.
    The DataSources lying under the subtree and other subtrees are selected.
           3.      To check for differences between the active and delivery versions of the DataSources, choose Select Delta.
    DataSources for which differences were found in the check (for example, due to changes to the extractor) are highlighted in yellow.
           4.      To analyze the differences between active and delivered versions of a particular DataSource, select the DataSource and choose Version Comparison. The application log contains further information regarding the version comparison.
           5.      To transfer a DataSource from the delivery version into the active version, select it in the overview tree using the button Highlight Subtree and choose Transfer DataSources.
    If an error occurs, the error log appears.
    Regardless of whether data has been successfully transferred into the active version, you can call the log by choosing Display Log.
           6.      To provide the active version of the DataSource in the connected BI systems and to enable data extraction and transfer, replicate the DataSource(s) with a metadata upload to the BI system.
    and in RSA1 in businuess content search ur required cube and select all the req fielsds in the next colums and select before and after is a must..in the selection field..
    this will solve ur issue..
    Prasanna

  • Extraction time while updating the data from update rule

    Hello Friends,
    Can you please tell me that why it is taking more time while updating the data from update rule to data target.
    I believe that it is taking 40% of total extraction time.
    Is there any specific reason for it?
    Prompt reply will be appreciated.
    Regards,

    hi,
    check if you have complex transformation in that update rules, like calculation, read from other tables, etc.
    take a look 'bw loading performance and analysis' doc
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1955ba90-0201-0010-d3aa-8b2a4ef6bbb2
    and bi performance tuning knowledge center
    Business Intelligence Performance Tuning [original link is broken]
    there e-learning for bw performance
    hope this helps.

  • Regarding error occur in business content activation

    Hai experts,
              when i am activating the business content its going to dump analysis the system is going to give me the error like " message_type_x" using st22 i found that error occured in abap program .It is an predefined program.Is there any solution for that one other wise i have  raise this question to service.sap.com.i need emergency.
                                               bye.

    Hi ,
    You have to underastand whether this is happening with all the objects , I mean are you getting this dump for any object you are trying to activate through bi content.
    If this is happening with few objects then you have see whether the method of activation bi content is being performed in the correct method.
    If thisis happening with all the objects then check all the basic settings and at the same time check authorisations.
    Check if you have any thing in SU53 transactions.
    Regards
    Rahul Bindroo

  • Error when Installing Business Content BW 3.5

    Hello Everyone,
    When I "Drag n Drop" the infocube 0PS_C021, it shows following errors :
    Object 0EMPLOYEE_EDUCATION (InfoSource,ISTD) could not be collected for object PA-PA-IO (Application,APCO)
    Message no. RSO296
    Diagnosis
    You have collected objects in the BW Metadata Repository. Associated objects for the object PA-PA-IO of type Application,APCO have also been collected. Object 0EMPLOYEE_EDUCATION of type InfoSource,ISTD was among these objects. This object 0EMPLOYEE_EDUCATION of type InfoSource,ISTD, is not, however, available in the Metadata Repository.                                              
    Object '0EMPLOYEE_EDUCATION' (ISTD) of type 'InfoSource' is not available in version 'D'
    Message no. RSO252                                                                               
    Diagnosis                                                                  
    You wanted to generate an object with the name '0EMPLOYEE_EDUCATION' (in transport request ISTD) of type 'InfoSource' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version D. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
    Please help me to solve these problems.
    Regards
    Sanjiv

    Hi Sanjiv,
    Check the below thread:
    Error when Installing Business Content BW 3.5
    http://help.sap.com/saphelp_nw2004s/helpdata/en/42/fbabd936493ee7e10000000a1553f7/content.htm
    Reg
    Pra

Maybe you are looking for