Error In the Excel Report

Hi
When I trying take the Excel Report ..In the SAP BPC 5.1 version
Its shows some error In the Description , But the Values are Coming Correctly
For Example :
Description Value
#name! 5000
Regards
Dayalan M

Hello Nagai,
I think you are not maintaining the description in the member of the dimension. Please check the description in the member .
Thanks.
With regards,
Anand Kumar

Similar Messages

Error while opening excel report

Hi,
While opening the excel report i am getting the below error.
REP-51026: No output for job 8923
Note: We have deployed the report in 10g Oracle Reports server present in a UNIX m/c.
Please let me know what i have to do.
Thanks & Regards,
Sudhaharan.
Message was edited by:
jsudhaharan

Refer Note:280376.1 on MetaLink. Hope this will help you resolve the issue.
Thanks
Shail

Cannot save the excel report in my application

Hi I wrote a program which can save the data to an Excel report. It runs perfectly on my own computer. After I built the application (exe file), and run it in another computer, which can not save the excel report. On my own computer, it has LabVIEW 2011 and report generation toolkit for Microsoftoffice; and on the other computer, I installed the LabVIEW runtime engine. Did I miss installing some other support software? Can anyone tell me why this is not working?
Thanks a lot,
Jane

Do you have Excel installed on the other computer?
I also suggest that you read this page : Including Report Generation VIs in Stand-Alone Applications (Report Generation Toolkit)
Hope this helps
When my feet touch the ground each morning the devil thinks "bloody hell... He's up again!"

Problem "The OLE DB provider for linked server reported an error. The provider reported an unexpected catastrophic failure Cannot fetch a row from OLE DB provider for linked server"

hi
i'd like to ask question about linked server.
my linked server used to work but now when i try to select from linked server i was told "The OLE DB provider for linked server reported an error. The provider reported an unexpected catastrophic failure Cannot fetch a row from OLE DB provider
for linked server"
but in fact for test connection i was told "the test connection to the linked server succeeded".
could anyone help me? thank u very much
best regards
martin

Hi,
In addition to Tracy's post we have to know those answers as well:
* what provider are you using for the connection
* what do you connect to
for example, if someone try to connect to oracle using sql server provider then several simple queries are going to work probably OK, but once you are trying to use T-SQL or any complex SQL query then the errors are starting.
please post the connection string (without the password!) + the query that you are trying to use.
[Personal Site] [Blog] [Facebook]

Putting video clips (mov) in to edit work place time line after photos (jpeg) getting error message, the importer reported a generic error. ? please help thanks

premier elements12, putting video clips (mov) in to edit work place time line after photos (jpeg) error message, the importer reported a generic error. ? please help.

TINA54
Thanks for the reply.
Some general comments...
Regarding:
THERE ANY WAY I CAN PUT MULTIPLE RANDUM TRANSITIONS IN TO THE TIME LINE WITH JUST ONE CLICK ? .
There is no transition choice for random transitions across the Premiere Elements 12 workspace Timeline. But, the Elements Organizer 12/Create Menu/Slideshow and its Slideshow Editor does have that random transition choice. So, one possibilitity would be to create your slideshow in Elements Organizer 12 Slideshow Editor and then move the slideshow into Premiere Elements with the Output of Edit with Premiere Elements Editor command.
Pending more details of the slideshow you are creating, I think that you would get your best photo quality and overall results staying with Premiere Elements 12 workspace (1080p) project and the transitions randomized manually.
perhaps applying the default to all (all at the same time),
using Timeline Menu/Apply Default Transition,
and then replacing transitions randomly for the random transition look).
Please let us know if any of that worked for you.
Thanks.
ATR

Error while opening Excel report using servlet

Hi
I am using a servlet to open an excel report which has multiple sheets . But there is a weird problem when i try to open an excel report with two sheets having the same name .
Generally when an excel with same sheet names is opened with Microsoft excel , it will open the excel file with a dialog showing error .
But when i am trying to open through a servlet after that open/save dialog box comes , its sending two requests and that too the second one from another browser . How i am saying that its sending from another browser is , during the second time its not passing the session checks which i placed .....I mean the session for the request doesn't have any data while it was expected to have some data which i placed in Session while logging in .
Can any one let me know why this is happening ?/

Refer Note:280376.1 on MetaLink. Hope this will help you resolve the issue.
Thanks
Shail

How to set a busy cursor when the excel report pops-up(in Excel)?

I'm using LabVIEW 7.1 and Report Generation Toolkit for MS Office to build a VI. at the end of each session when the data in a certain peroid of time was collected, the data will be transmmited to Excel report. the problem is during the poping-up of Excel report, if the cursor clicks inside Excel accidently, all the collected data will disappear and the blanks in Excel will no longer be filled automatically. I have tried to use Set Busy.vi, but it only works in VI panel, not in Excel. Will someone please help me?
thanks very much

Hi jingli,
For changing cursor appearance, you can visit another post on the forum:
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RNAME=ViewQuestion&HOID=506500000008000000272E0000&ECategory=LabVIEW.LabVIEW+General
(search for mouse pointer appearance in this forum if the URL doesn't work)
Another suggestion would be setting the windows appearance to "minimum" when you open your Excel report (wire it at the New Report VI).
Dan

Encountering Error while executing excel report in Reports 10g

Hi,
I have got Oracle 10g developer environment which has been implemented on Web browser through Oracle Jinitiator. I am running an excel report and encountering 105101: non-ORACLE exception -105101 when the output file exceeds a size of around 23MB. Where is this configuration done on Reports Server? Can we change this?

Hi
What do you mean by Install portal? Where should I install?
While installing the server i have choosen the Usage type EP also!!
Thanks
mv_d

WIS 10901 error while running WEBI Report but no error in the DESKI report

Hi,
Can anyone please help me to resolve this issue.
we have recently migrated BOXIR2 - BOXI3.1. many of the reports are from SQL Server and Oracle databases.
Oracle Database connection universe reports error:
i'm getting WIS 10901 error while running WEBI report for some particular objects not for all the objects but the same time i could able to pull the same object in the DESKI.
those particular objects having lenthy data's for ex:100 bytes. but i tried same 100bytes some other objects refreshing fine and displaying results.
i don't know where we ar missing.
SQL Server Connection universe reports:
These reports are giving mismatched results from the original but the callculation are done by the reporter side by creating variables. other than that there are no issues with these reports.
Please we are struggling lot on these issues, can anyone please help us.

Hi,
For your issue 2 check whether any filters used in XI R2 are missing in XI R3. As during migration some filetrs might be missed. To check this in slice and dice panel in both bo versions.
Cheers,
Suresh Aluri.

Errors in the generated reports

When I run a report for Management 3 - Updates in a deployment, SCCM will generate all the data except in a few areas. On the main report I get #Error in Collection Name, then if I click on a particular update I get #Error for all 3 states. If
I go further and click on one of the states, I get #Error in all the Error Descriptions.
I'm trying to get a good weekly report to send to my boss that shows what updates were pushed in a package, and what clients have and haven't installed each update, I can get a default report that shows all updates in a package and that's great, but
I can't generate a new custom report
When I try to create a custom report I get the following error:
The requested object information could not be retrieved. Refresh the Configuration Manager console to verify that another administrator has not moved or deleted the object, or that the role-based administration security scopes or security roles for
the object or current user have not changed

No, we never did. We ended up calling Microsoft and they spent HOURS on remote sessions trying to get it cleared up. They were thinking it was part of our SQL Database that was corrupt, and we ended up having them come onsite and reinstall
Config Manager.

Internal Error:Error retrieving the scan report

I have windows 7 32 bit when i running windows 8 upgrade assistant this message is showing Internal Error:Error retrieving the scan report

Hi Arsalan,
Windows 8 upgrade assistant will scan your PC, and connected devices to see if they'll work with or be compatible with Windows 8 or Windows 8.1, and generate a report accordingly.
If this error happens in the process of generating the report, there will be a log generated in the event log, the log will give detail error information for troubleshooting.
Input “event viewer” at the search box and find the event viewer, find the error log related to upgrade assistant and post for further troubleshooting.
Regards
Wade Liu
TechNet Community Support

Data Error in the Query/Report after selective data deletion for infocube

Hi Experts,
Please advise what i was missing and what went wrong...
I got a Query (Forecast) on a Multicube...which is based on 2 Infocubes with Aggregates...
As i identified some data discrepency..yesteraday i performed selective data deleation on one of the Infocube
and executed report yesteraday and the results in the query are correct...
When today i executed the same report i am getting different results..
When i compared the results of the report with that of data in cube they are not matching
The report is not displaying the data in cube..for some rows it is displaying the data in the cube but for some rows it is just displaying same as the above row
there is no data loaded into info cube after selective deleation
Do i need to perform request compression and fill the aggregated after selective deleation
Please advise what went wrong

Hi Venkat,
No i haven't done anything on aggregates before or after selective delete
As there is not data load after the selective delete according to SAP Manual we don't need to perform any thing on aggregates...as selective data deletion on cube will delete data from aggregates as well
Please update how to identify error

Error in the pricimg report V/ld

Hi Experts
when I excecute pricing report through v/ld, i choose dynamic selections next to variant button i mention the deatils of created by, here i get the report when i choose materilal and the SORG and Distribution channel, i get the report, but when keep material field blank, and execute the report it says no condition record exist, please help me to know the cause for this,
I get the pricing report with the same details in the quality Envmnt.
Thanks

In V/LC keep for your specific report, for fields Sales Org / Distribution channel in "Positioning " column select 1 Page Header.
for Material , place it next to Sales Org / Distribution channel and in "Positioning " column use 3 Item level.
Then execute v/ld and check the results.
Regards
Sai

Error in BPC Excel report

Hello Experts,
I am useing BPC 5.0,
I am trying to create a EvDRE Grid report (Drag & Drop report in BPC Excel)
I am Faceing an error as "EVDRE encountered an Error reteiveing data from the Web server".
Thanks a lot for help.
Cheers,

Hi
refer the pdf at Page 19 , may get somme help
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/9016a6b9-3309-2b10-2d91-8233450139c1
Regards
Abhishek

Can we change file name in the excel report bursting in infoview

Hi,
I have created a publication with email destination and excel format in infoview. By default there are some place holders which can be used to give report name during bursting process but I want to customize report name like I want to append state variable value in the report name so that each recipient should get report which has reportname_state.xls.
Did anyone came across this situation. Please help me.
Harish

You cannot change thats placeholders you must use them or use a fixed name...
IYou must try in the body of the email theres some other additional plaeholders that maybe you can use in this case.
Regards

Error In the Excel Report

Similar Messages

Maybe you are looking for