Error in the installation of portal when upgraded to SP14

Hi All,
I have installed SR1 (WAS,Portaland KM)and everything was working fine.
Then i tried to upgrade my server to SP14 and i have successfully upgraded WAS and portal to SP14 and it was working fine. But once i tried upgrading the KM it is throwing one error <b>"portal not found"</b>.When i checked for the version in Support Desk, it was showing me versions for WAS and portal, but not of KM. And my Content Management is working properly.
My OS is AIX 5.3
do help me. Its urgent
Regards
Rajeev.

Hi Rajeev,
are you sure you entered the correct logon / SID data?
In case you did is there anything specific on that issue to be found in the installation or default trace? If so, please post the relevant extracts.
Regards,
Thomas

Similar Messages

When I try to install itunes 10.5.2, I get the following error message "The installer has insufficient privileges to modify this file c\progamfiles\itunes\itunes.exe and won't install. help

When I try to install itunes 10.5.2, I get the following error message "The installer has insufficient privileges to modify this file c\progamfiles\itunes\itunes.exe and won't install. help

Okay ... so it's not one of the cases of bodged up ACLs on the Apple folder in Common Files. (That's been underlying a few of the recalcitrant E7W5s.
Just in case, let's try the fixit from the following document:
Fix problems with programs that can't be installed or uninstalled

Good evening I would please help me, IGood evening I would please help me, I have problems with flash player when update on my computer Flash Player for windows 8, gives me error in the installation that is not apply on my computer. Please help. Thank You

Good evening I would please help me, IGood evening I would please help me, I have problems with flash player when update on my computer Flash Player for windows 8, gives me error in the installation that is not apply on my computer. Please help. Thank You

First, confirm that ActiveX Filtering is configured to allow Flash content:
https://forums.adobe.com/thread/867968
Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
You can try to work around these issues by using Compatibility View:
http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11
If that is too inconvenient, using Google Chrome may be a preferable alternative.

HT1459 Last night I was installing an itunes upgrade but there a problem . Error in the installation of the runtime c+. Now I am unable to access iTunes

I was upgrading my iTunes program last night, but there was an error in the installation. Runtime error of incorrectly installing of C+ by the program. Now I can not access my iTunes program. Is there a fix to this problem?

That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

HT201272 I recently upgraded from an Iphone 4S to 5. I am having trouble with magicjack; each time i install it it gives me an error message "The installation associated with this device is invalid". Cannot seem to access account info or make calls.

I recently upgraded from an Iphone 4S to 5. I am having trouble with magicjack; each time i install it it gives me an error message "The installation associated with this device is invalid". Cannot seem to access account info or make calls.

I have exactly the same trouble.
If you wet the answer, please let me know!!

Error at the installation of the CR Runtime package V13.01/V13.02 - reg key

Hello,
we got an error at the installation of the cr runtime package. We have try both
installation packages(msi) 13.01 and 13.02. But it's the same error.
We want to install this package automaticly on our computers. On 8 of 10 computers was the instalation successfully.
On the remaining 2 computers we got the following error.
MSI (s) (68:9C) [16:30:41:790]: Product: SAP Crystal Reports runtime engine for .NET Framework 4 (32-bit) -- Error 1402. Could not open key: HKEY_LOCAL_MACHINE\SOFTWARE\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0
Crystal Reports. System error 87. Verify that you have sufficient access to that key, or contact your support personnel. <<--- see below
Executing op: RegAddValue(Name=svcmgr,Value=0,)
MSI (s) (68:9C) [16:30:41:775]: Executing op: RegOpenKey(Root=-2147483646,Key=SOFTWARE\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Crystal Reports\templates,,BinaryType=0,)
MSI (s) (68:9C) [16:30:41:775]: Executing op: RegAddValue(Name=templatepath,Value=C:\Programme\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\Crystal Reports 2011\/Templates,)
MSI (s) (68:9C) [16:30:41:775]: Executing op: RegAddValue(Name=templatesearchmask,Value=*.rpt,)
MSI (s) (68:9C) [16:30:41:775]: Executing op: RegAddValue(Name=templatefileextension,Value=rpt,)
MSI (s) (68:9C) [16:30:41:790]: Executing op: RegOpenKey(Root=-2147483646,Key=SOFTWARE\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Crystal Reports\DatabaseOptions,,BinaryType=0,)
MSI (s) (68:9C) [16:30:41:790]: Executing op: RegAddValue(Name=MergeConnectionProperties,Value=no,)
MSI (s) (68:9C) [16:30:41:790]: Executing op: RegOpenKey(Root=-2147483646,Key=SOFTWARE\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\\Crystal Reports,,BinaryType=0,)
MSI (s) (68:9C) [16:30:41:790]: Executing op: RegAddValue(Name=CommonFiles,Value=C:\Programme\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\,)
MSI (s) (68:9C) [16:30:41:790]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\SOFTWARE\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\\Crystal Reports 3: 87
MSI (s) (68:9C) [16:30:41:790]: Product: SAP Crystal Reports runtime engine for .NET Framework 4 (32-bit) -- Error 1402. Could not open key: HKEY_LOCAL_MACHINE\SOFTWARE\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\\Crystal Reports. System error 87. Verify that you have sufficient access to that key, or contact your support personnel.
Error 1402. Could not open key: HKEY_LOCAL_MACHINE\SOFTWARE\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\\Crystal Reports. System error 87. Verify that you have sufficient access to that key, or contact your support personnel.
MSI (s) (68:9C) [16:30:41:790]: User policy value 'DisableRollback' is 0
Our it team have an idea. They think that the problem is the double \ at the end of the reg key path. You can find this if you search
in the code above.
Can you check this or have you an other idea to solve the problem.
best regards
Dennis Hoyer
- IT consultant (.net development)

Hi,
See if below article helps,
[1535811 - Error 1402 when installing Crystal Reports for Visual Studio 2010 runtime via the msi file |http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533333335333833313331%7D.do]
- Bhushan.

Error before the installer could configure itunes

Hi
I get the message above when I try to install Itunes 10.6.3.25.
Can anyone help me how to solve this. Or I cant get the new version of Itunes :-(
"Error before the installer could configure itunes"

WELCOME TO THE FUN!!!!!!
you are one of many my friend, we have all tried everything, uninstalling then reinstalling etc.
Apple seems to have really messed this one up and I can't seem to find a way to fix it either.
One thing i found to work was
1. un-install every apple program: itunes, then quicktime, then apple software update, then apple mobile device support, then bonjour
2. find itunes 8.2 and save the install exe. to your desktop (oldapps.com is good)
3. restart computer
4. Right click the install exe. and select run as administrator.
5. VERY IMPORTANT: On one of the menus at the begining of the install it will have the options to install ( 3 options )these options will already be pre selected you need to de-select the final option which is "automatically upgrade itunes"you must de-select this or it will upgrade to the 9.0 which requires the apple application support.
6. next button and complete install.
the apple application support seems to be causing some of these problems, and 8.2 doesn't include it in the install. I basically got these steps from searching on google and I tried it and it worked for me. Only problem is I can't put music on my Ipod with Itunes because it requires version 9.0 itunes

Error during the installation of SAPNetWeaver

i try to insall sap netweaver but there is error during the installation,the message is:
Errors occurred during the installation.
An error occurred and product installation failed. Look at the log file C:\sapdb\NSP\log.txt for details.
when i check the file C:\sapdb\NSP\log.txt for error i find :
Mon Mar 15 00:06:01 CET 2010 MaxDB sdbinst: One or more validation errors occured:
Mon Mar 15 00:06:01 CET 2010 MaxDB sdbinst: PARAMETER     ERRORMESSAGE
Mon Mar 15 00:06:01 CET 2010 MaxDB sdbinst: =========     ============
Mon Mar 15 00:06:01 CET 2010 MaxDB sdbinst: DBNAME     Instance already exists
Mon Mar 15 00:06:01 CET 2010 MaxDB sdbinst: Database NSP must not exist
Mon Mar 15 00:06:01 CET 2010 MaxDB sdbinst: installation exited abnormally at Mo, Mar 15, 2010 at 00:06:00
Mon Mar 15 00:06:02 CET 2010 MaxDB: Error during call to sdbinst, rc= 1
Mon Mar 15 00:06:02 CET 2010 MaxDB: Done with call_sdbinst
Mon Mar 15 00:06:02 CET 2010 MaxDB: rc of sdbinst = 1
Mon Mar 15 00:06:02 CET 2010 MaxDB: Start of CallSdbuninst
Mon Mar 15 00:06:02 CET 2010 MaxDB: No IndepProgPath. Nothing to do.
can you help me to solve this problem

Hi Mustsap,
as the log points out, there are remainders of a previous installation of NSP DB on your computer.
Try the RegClean tool that comes with the evaluation copy. Eventualy you have to delete keys from the registry manualy. You won't be able to to reinstall before these remainders are removed.
Cheers Markus

Error during the installation of permanent license keys

Dear Experts,
When applying SAPLicense following error message is geeting, please help how can i resolve this issue
" Error during the installation of permanent license keys"

More information needed.
For example:
Your SAP version?
Is it a system copy?
How exactly did you try to delete from SAP level?
Without this information, nobody here can do anything but guess.
There are a lot of SAP notes about similar problems.
But for this you will have to supply more information.
Or better; Search in SAP notes yourself!
And here is my guess:
SAP Note 917936 - License keys cannot be deleted by user SAP*

ORA-20001 GET_BLOCK-ERROR during the installation of an application

hi people,
I' ve got the following error during the installation of an application in apex 2.2.
ORA-20001: GET_BLOCK Error. ORA-20001: Execution of the statement was unsuccessful. ORA-02047: cannot join the distributed transaction in progress <pre>begin execute immediate 'alter session set nls_numeric_characters='''||wwv_flow_api.g_nls_numeric_chars||'''';end;</pre>
Can anybody help me?
Message was edited by:
user512746

hi,
db-version is oracle 10g r2
os windows server 2003
the error occured when two ore more people working in their workspaces but not when only one person working in his workspace
Message was edited by:
user512746
Message was edited by:
user512746

HT202159 I tried several times to download pages that I already pay for and it says that there was an error in the installation , what can I do

I tried several times to download pages that I already pay for and it says that there was an error in the installation , what can I do

- Temporarily disable anti virus software if installed.
- Apps such as Little Snitch, Net Nanny, and Hands Off can prevent apps from downloading.
- Third party download managers can cause problems when downloading apps.
I see v10.7.4 in your profile but make absolutely sure that's correct because the minimum requirements for Pages is v10.7.4 according to the Pages Information panel at the App Store.
Click your Apple menu icon top left in your screen. From the drop down menu click About This Mac.

Error Message, The installer database is corrupt.

I get the error message, "The installer database is corrupt" when I try to install Photoshop CS3 on my new computer with Windows 8.

run the cleaner, http://www.adobe.com/support/contact/cscleanertool.html
restart your computer
reinstall using compatibility mode.

My Adobe Acrobat upadte failed w Error 1321 The installer has insufficinet privileges to modify file.... I followed the Adobe online instructions to change the advance settings. Now trying to reinstall my Adobe Acrobat but I do not see the download optio

My Adobe Acrobat update failed w Error 1321 The installer has insufficient privileges to modify file.... I followed the Adobe online instructions to change the advance settings.
Now trying to reinstall my Adobe Acrobat but I do not see the download option when I sign in to my Adobe account. Please help.
Also want to confirm that I uninstall my Adobe Acrobat before REinstalling.

error 1321 the installer has insufficient privileges to modify this file c:\program files\adobe\reader 11.0\reader\arh.exe....also i tried reinstall but still receive error message...
error 1321 the installer has insufficient privileges to modify this file c:\program files\adobe\reader 11.0\reader\arh.exe
need your help please

Error initializing the installer - cs6

When I start the setup of adobe I get the message "Error initializing the installer". Why?

We can't know. You have not provided any system info or other technical details liek what CS6 product you are actually trying to install...
Mylenium

Error Message: "The parameter is incorrect" when trying to modify SSLs

Like I wrote in my subject line, RoboHelp pop-ups the error message “The Parameter is incorrect” when I try to modify any SSL.
What happens next, is that the “Print Document General” window opens, but does not allow me to select anything (the fields are blank).
If I close the window and open it again, it seems to work until I have to select the styles from our Microsoft Word Template.
Then the error message “The parameter is incorrect” appears again, and RoboHelp does not allow me to select anything but a stylesheet
(which is not what I need).
This is very strange, because not only until recently I was able to build Word documents and PDFs, but also my colleagues are able to
produce them out of my source.
Even the old projects, that I was able to build, now I cannot.
I do not have any problem in generating CHMs.
Until now I have tried everything I found in the forum:
I deleted the PSS file (also following the advice in your snippet number 14 from 10 – RoboHelp HTML –Features and Use).
http://forums.adobe.com/thread/120022
I reinstalled RoboHelp and the Adobe Technical Communication Suite (I also used CCleaner to delete the registries).
http://forums.adobe.com/thread/598335
I gave Administrator rights to all users in my computer (what seemed to work for some SSLs, but not for all)
http://forums.adobe.com/thread/870339
I am also looking at all programs that I installed since the last time I was able to build .docs in case there is a conflict, but I do not find anything!
My computer has Windows 7 installed and I use the Adobe Technical Communication Suite 3.5, with RoboHelp 9.
My Microsoft Office is 2010.
Can somebody please help me? Did someone have the same problem?
Thanks in advance.

Hi there
I know you said you reinstalled, but did you reinstall before or after you gave administrator rights to all users on your computer? And how many users *ARE* on your computer?
Often you need administrator rights to properly install things.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Error in the installation of portal when upgraded to SP14

Similar Messages

Maybe you are looking for