Error in the outbound Que CIF 'vesrsion 0 isnot maint for the fis yr 2015

Hi ,
I sending the Process order through CIF , there is out bound que for CIF while executing the transfer i am getiing the error
' Version 0 is not maintained for the fiscal yr 2015' I j=have check the production version validity ddate & version 0 in the controlling also .
Plz let me know the reason for error .
Regards
satish

Dear Bramhankar Sir ,
Thanks for the reply ,
But sir , i have check in the OKEV transaction , in that o version is maintained for the year up to 2010 , but why is is showing me the 2015 in the error. fromwhere it is picking 2015 fiscal yr ?
Sir i will reply back once i will check the SAP notes
Thanks for the valuable reply .
Reagrds
satish
Edited by: satish kapartiwar on Nov 10, 2009 7:13 AM
Solution :-
We Rerun the Que & refresh it , it works ...... I think the issue with scheduling .
Anyway thanks for the help .
regards
satish
Edited by: satish kapartiwar on Nov 11, 2009 11:00 AM

Similar Messages

Error 'sysfail' in outbound que of SRM :Initial download - DNL_CUST_BASIS3

Dear Consultants,
                               We are trying to replicate the product categories and material master from ECC system to SRM system for the first time.
Performed all the middleware settings as per note 720819. When running the initial load - DNL_CUST_BASIS3 the prog keeps on running. We are getting a entry in SRM outbound que - Sysfail - trigerred a dump in the source system. When we get into ST22 in ECC system we see there is a dump. While analysing the dump in st22 we get that table CRMATAB is empty, the same issue we get when we debug the que in outbound que in SRM.
We are planning to apply note 1501685 to address the issue. But there are some entries which are there in Inbound que of SRM system. All have the status of sysfail. Some refer to analyse the error in SMW01 and some say refer note 490748. In the Note 490748 all entries are maintained . Other entries says the category for material group xxx does not exist - import the Customizing object DNL_CUST_PROD1.
I am a bit confused now, will the application of the Note will solve the issue or is there something else that may need to be done.
Any specific inputs will be valuable for me.
regards
Arindam.

Hello All,
                            I am getting the following error in SMW01a re as follows
Category for material type MAT_KMAT does not exist
Category for material group CM14 does not exist
Please note I am running the following initial load in sequence
DNL_CUST_BASIS3
DNL_CUST_PROD1
DNL_CUST_PROD0
We are also getting a dump in SRM system -
ST22 -
Runtime Errors         CALL_FUNCTION_PARM_MISSING
ABAP Program           SAPLSMOUTIL
any specific inputs will be welcome
regards
Arindam

I purchased a magazine using the Zinio app which I'd recently downloaded on to a recently purchased iPad. I received an error message at the time (can't recall the details) but have since been invoiced for the $8.99. How can I get the Magazine I purchased

I purchased a magazine using the Zinio app which I'd recently downloaded on to a recently purchased iPad. I received an error message at the time (can't recall the details) but have since been invoiced for the $8.99. How can I get the Magazine I purchased?

FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
Phone: 800-275-2273 How to reach a live person: Press 0 four times
Hours of Operation: Mon-Fri: 9am-5pm ET
Email: [email protected]
How to report an issue with Your iTunes Store purchase
http://support.apple.com/kb/HT1933
How to Get a Refund from the App Store
http://gizmodo.com/5886683/how-to-get-a-refund-from-the-app-store
Canceling a Digital Subscription
http://gadgetwise.blogs.nytimes.com/2011/10/14/qa-canceling-a-digital-subscripti on/
 Cheers, Tom

Cannot update. Get error message 1648, "no valid sequence could be found for the set of patches."

Cannot update. Get error message 1648, "no valid sequence could be found for the set of patches."

Uninstall the corrupt Reader version using http://labs.adobe.com/downloads/acrobatcleaner.html then download and install the latest Reader from http://get.adobe.com/reader/enterprise/

COREid Federation Error: A local user session could not be created for the

Hi,
I installed two instances of COREid Federation in my machine. Also installed SiteMinder and LDAP. Source Domain of COREid (8101) uses LDAP as IdMBridge and Destination Domain (9101) uses SiteMinder as IdMBridge. I am trying to access the resource protected by the SiteMinder from the source domain using the URL which is constructed using the pattern given in the PDF:
http://mymachine.domain.com:8101/shareid/saml/ObSAMLTransferService?DOMAIN=DestinationDomain&method=POST&TARGET=http://mymachine.domain.com:8887/Source/Source.html
Assertions are generated and I can see the assertion in the Source domain and transferred to the Destination Domain.
I get the following error in the Destination Domain Shareid Log file:
ERROR - [http10113-Processor3] - RECEIVER: ERROR: A local user session could not be created for the assertion
Please help me to solve this issue?
Note: The Web agent runs on the web server instance 8887.
SiteMinder is able to protect the resource when accessed.

Typically that error occurs when the destinations access management system can't find the user based on the SAML attribute. Check to make sure that the attribute that you are matching on matches exactly.

Error while importing tabledata: There are no readers registered for the

I try to import data from another table. I exported in different types - sql and xml, cvs... Now if Itry to import this data SQLDeveloper is boring me with the Message:
"There are no registered readers for the sql type."
or
"There are no registered readers for the xml type."
or
"There are no registered readers for the cvs type."
So where do I have to register wich readers?
Another Problem: I tried to start the import "semi-" manually while copiieng the INSERT-Statements from the sql-Dataset to SQLDeveloper. So I noticed that the exported Date has Commas instead of points - like here:
.'650.507.9833'.to_date('21.06.99','DD.MM.RR').'SH_CLERK'.2600.null.124.50);
Is it possible to configer the SQLDeveloper, because this statement causes an error.
Thanks a lot
Torsten

My Operating System is Window XP professionel and there is jre 1.4 running. When I execute the SQL-Statement I get the following result:
PARAMETER VALUE
NLS_NUMERIC_CHARACTERS ,.
1 rows selected
The thing that really makes me thoughtful is that SQLdeveloper doesn't know its own export-format...
greets
Torsten

Hi, I am getting an 'Error 4810 occurred at Sound File Read Open.vi' for the attached wav file (plus many other wav files). Any ideas?

Hi,
I am getting an 'Error 4810 occurred at Sound File Read Open.vi' for the attached wav file (plus many other wav files).
Any ideas?

No attachment exists.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

TS2446 Hello!After I've done my last softwere update I couldn't buy or get any free apps on the apps store.There was an error on my paymant method.I reintrodius my data for the credit card and again error for my credit card.I've changed the credit card an

Hello!After I've done my last softwere update I couldn't buy or get any free apps on the apps store.There was an error on my paymant method.I reintrodius my data for the credit card and again error for my credit card.I've changed the credit card and the same.why???????

I have tried all those things I even updated the software to the new iOS system and it still did fix my problem.
What happened is that my garage band looks like it will open then it shuts down.
I have lot of important things on my garage band and I'm afraid that if I uninstall it deleting it then reinstalling it all my work on it will be gone and I can't have that happen.
Everyday I am hoping that when i go to open the app that is will work but it doesn't it gets ready to turn on then it shuts off , the app doesn't even open all the way and turns off.
I really hope I don't have to erase it.
It'll say it's ,lading my songs then it shuts down .
If I waited for the App Store to come up with an update for garage band should I wait till then to update my app so it doesn't get damaged . I don't want to erase it and all my data get erased . I figured if I wait for an update then my garage band will reset itself but won't delete my data. I'm not sure if that will help. Is there anything you or anyone else might know that can help me with this matter ?
Thank you
Simachyahi

I need to reprogram the delete and enter key to the left side of a external keyboard for the ipad mini. don't need the caps/lock or ctrl key and due to an injury my daughter can only use her left hand to type. She is using a text to speech app to verbaliz

I need to reprogram the delete and enter key to the left side of a external keyboard for the ipad mini. I don't need the caps/lock or ctrl key. Due to a brain injury my daughter can only use her left hand to type. She also uses a text to speech app to verbalize all of her needs since her speech isn't intelligible any longer either. And her vision was significantly affected also, so the keyboard has to be mounted about 6 inches from her face. So to reach across the keyboard with her left hand to the right side delete and enter button is physically difficult and causes typing errors, which cause people to not understand what shes trying to say.
The best keyboard so far is the Zagg folio mini. I just had to make stickers to enlarge the letters on the key buttons.
Does anyone know how I can reprogram these two keys? Or where I can buy a wireless mini keyboard for Ipad made for lefthanders with these two functions on the left side. I have searched for days and days. It's sooooo important to me that she be able to contribute her voice again. Imagine if you got in a car accident and couldn't speak clearly any longer, but understood everything still. Thanks for any help and suggestions you all take the time to share with me. I really appreciate the kindness of strangers to help me help my daughter.
Sami's mom

Sami\'s mom wrote:
I need to reprogram the delete and enter key to the left side of a external keyboard for the ipad mini.
You cannot.

Warning:The EXPORT data cluster is too large for the application buffer.

Hi Friends,
I am getting following warning messages whenever I click on costing in "Accounting" tab.
1. Costing data may not be up to date Display Help
2. No costing variant exists in controlling scenario CPR0001
3. An error occurred in Accounting (system ID3DEV310)
4. The EXPORT data cluster is too large for the application buffer.
I can create project automatically from cprojects. PLan costs, budget and actuals maintain in WBS elements can be visible in cproject Object Links.
Your reply is highly appreciated.
Regards,
Aryan

Hi;
Please, check the Note --> 1166365
We are facing the same problem in R3, but apply this no fix it.
Best regards.
Mariano

Query to get the details of Blocking and deadlock occurred for the Day

Hi,
I need a query to get the details of blocking and deadlock occurred for the day.

You havent specified which version of SQL you are using which makes it difficult to give a solution. Assuming its latest versions , by default SQL Server (in any versions) doesnt track blocking information.
You need to run some kind of queries/traces to capture blocking. The same goes with Deadlocks where majority of the DBA's enable trace flag 1222/1205 when they suspect deadlocks happening.
Check this link -
http://dba.stackexchange.com/questions/10644/deadlock-error-isnt-returning-the-deadlock-sql/10646#10646
This link gives code to get historic deadlock information. I havent used it , I just googled to get that.
That being said if you are looking for something to capture for the future check the below links.
Check these links on how to setup extended events to capture deadlock and blocking.
http://sqlblog.com/blogs/jonathan_kehayias/archive/2010/12/21/an-xevent-a-day-21-of-31-the-future-tracking-blocking-in-denali.aspx
http://blogs.msdn.com/b/sqlserverfaq/archive/2013/04/27/an-in-depth-look-at-sql-server-memory-part-2.aspx
http://blogs.technet.com/b/mspfe/archive/2012/06/28/how_2d00_to_2d00_monitor_2d00_deadlocks_2d00_in_2d00_sql_2d00_server.aspx
HTH
Regards, Ashwin Menon My Blog - http:\\sqllearnings.com

The timer service encountered an exception checking for the upgrade mode registry key. Requested registry access is not allowed.

Once in a while i get the error
Event ID 6463
The timer service encountered an exception checking for the upgrade mode registry key. Requested registry access is not allowed.
This also happens when i restart the timer service.
I already cleared the SharePoint cache (xml's) but no success with that.
Environment is
SharePoint 2013 SP1 + CU Dec 2014

This is a brand new SP13 with SP1 installation after binaries installation i also installed Dec 2014 CU and then created the SP farm.
The Apppool/Timer account is member of WSS_ADMIN_WPG.
Issue can be reproduced with restarting SharePoint Timer Service.
Hereby the Process Monitor output. Hence i filtered it on NOT SUCCESS and Path contains the word UPGRADE
11:37:57,4244851 OWSTIMER.EXE
6272 RegQueryValue
HKLM\SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\15.0\WSS\UpgradeLogLevelOverride
NAME NOT FOUND Length: 144
11:37:57,6632057 OWSTIMER.EXE
6272 RegOpenKey
HKLM\SOFTWARE\Microsoft\Fusion\PublisherPolicy\Default\v4.0_policy.15.0.Microsoft.Office.Access.Services.Moss.Upgrade__71e9bce111e9429c
NAME NOT FOUND Desired Access: Read
11:37:57,6632889 OWSTIMER.EXE
6272 RegOpenKey
HKLM\SOFTWARE\Microsoft\Fusion\PublisherPolicy\Default\policy.15.0.Microsoft.Office.Access.Services.Moss.Upgrade__71e9bce111e9429c
NAME NOT FOUND Desired Access: Read
11:37:57,7140763 OWSTIMER.EXE
6272 RegOpenKey
HKLM\SOFTWARE\Microsoft\Fusion\PublisherPolicy\Default\v4.0_policy.15.0.Microsoft.PerformancePoint.Scorecards.Upgrade__71e9bce111e9429c
NAME NOT FOUND Desired Access: Read
11:37:57,7141089 OWSTIMER.EXE
6272 RegOpenKey
HKLM\SOFTWARE\Microsoft\Fusion\PublisherPolicy\Default\policy.15.0.Microsoft.PerformancePoint.Scorecards.Upgrade__71e9bce111e9429c
NAME NOT FOUND Desired Access: Read
11:37:57,7313089 OWSTIMER.EXE
6272 RegOpenKey
HKLM\SOFTWARE\Microsoft\Fusion\PublisherPolicy\Default\v4.0_policy.15.0.Microsoft.SharePoint.Portal.Upgrade__71e9bce111e9429c
NAME NOT FOUND Desired Access: Read
11:37:57,7313403 OWSTIMER.EXE
6272 RegOpenKey
HKLM\SOFTWARE\Microsoft\Fusion\PublisherPolicy\Default\policy.15.0.Microsoft.SharePoint.Portal.Upgrade__71e9bce111e9429c
NAME NOT FOUND Desired Access: Read
11:37:59,2026527 OWSTIMER.EXE
6272 RegQueryValue
HKLM\SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\15.0\WSS\MS_InternalUse_Only_UpgradeableVersion
NAME NOT FOUND Length: 144
11:37:59,2109400 OWSTIMER.EXE
6272 RegQueryValue
HKLM\SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\15.0\WSS\MS_InternalUse_Only_UpgradeableVersion
NAME NOT FOUND Length: 144
11:38:05,3534303 OWSTIMER.EXE
6272 RegQueryValue
HKLM\SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\15.0\WSS\MS_InternalUse_Only_UpgradeableVersion
NAME NOT FOUND Length: 144
11:38:05,3537846 OWSTIMER.EXE
6272 RegQueryValue
HKLM\SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\15.0\WSS\MS_InternalUse_Only_UpgradeableVersion
NAME NOT FOUND Length: 144
11:38:05,3594290 OWSTIMER.EXE
6272 RegQueryValue
HKLM\SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\15.0\WSS\MS_InternalUse_Only_UpgradeableVersion
NAME NOT FOUND Length: 144
11:38:05,3597316 OWSTIMER.EXE
6272 RegQueryValue
HKLM\SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\15.0\WSS\MS_InternalUse_Only_UpgradeableVersion
NAME NOT FOUND Length: 144
11:38:05,3653094 OWSTIMER.EXE
6272 RegQueryValue
HKLM\SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\15.0\WSS\MS_InternalUse_Only_UpgradeableVersion
NAME NOT FOUND Length: 144
11:38:05,3656118 OWSTIMER.EXE
6272 RegQueryValue
HKLM\SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\15.0\WSS\MS_InternalUse_Only_UpgradeableVersion
NAME NOT FOUND Length: 144

I keep getting a message pop up the first time I open Photoshop CC for the day, "we sorry, we can't connect to adobe server at this time...I followed instructions to turn off my antivirus and firewall, then open it. But the problem still remains. What can

I keep getting a message pop up the first time I open Photoshop CC for the day, "we sorry, we can't connect to adobe server at this time...I followed instructions to turn off my antivirus and firewall, then open it. But the problem still remains. What can be done?

Moving this discussion to the Creative Cloud Download & Install forum.
R.O.B. please see Sign in, activation, or connection errors | CC, CS6, CS5.5 - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html for information on how to resolve the connection error between the computer and our activation server.

I ordered the 'Creative Cloud" student version two days ago, but yet it only appears as the test version, though I already paid for the the first month. What can I do?

I ordered the 'Creative Cloud" student version two days ago, but yet it only appears as the test version, though I already paid for the the first month. What can I do?

Burakymz for information on how to resolve the connection error preventing your membership from being authorized please see Sign in, activation, or connection errors | CS5.5 and later.

When I go to update my software using the app store download, it always asks for the previous user's ID, not mine. Please help!

When I go to update my software using the app store download, it always asks for the previous user's ID, not mine (my IT guy at school's-I am a faculty with admin priviledges). I have signed in as me, have set the main preferences login user as me,and everywhere on the laptop I can use my apple ID except here. It always shows me a greyed out ID of my IT. How can I reset this to my ID? It doesn't give me an option to change the user ID, only a link to reset password. I reset it, but it did not change the problem. Can someone help me?

It's not an ID problem, it's an ownership problem.
When someone uses their personal Apple ID to buy and download content, the content is licensed to them and has their Apple ID engrained in it's DNA. It is an anti-piracy program. And when that personal Apple ID is used to setup a new Mac, it involves the Mac itself, the shipping OS and any pre-installed apps as well.
It's not the correct way to handle Macs that belong to a business or an institution. And had it been handled correctly they would not now be in this predictument needing a drastic remedy.

Error in the outbound Que CIF 'vesrsion 0 isnot maint for the fis yr 2015

Similar Messages

Maybe you are looking for