Error in the "Project Info System" report

Hi
I am trying to execute the report CN52N and in the Delivery time field get the value as 0 instead of the value from Purchase Info Record or the Material Master. Can anyone please help me regarding this.
manoj

Hi ,
Please can you post the original Error message text?
Are you able to start at least one measurement without error?
Greetings
Walter

Similar Messages

Run time error while executing Project Info system Reports

Hi,
I would like to inform while running project infosystems reports (CN41/41N / cns41 etc), it is taking long time & most of the time run time errors are coming. I observed due to more objects in projects, run time error is coming. Request you to suggest to fix the issue.
Thank you for your cooperation.
Regards,
Rakesh Pradhan

Hi,
I would like to inform while running project infosystems reports (CN41/41N / cns41 etc), it is taking long time & most of the time run time errors are coming. I observed due to more objects in projects, run time error is coming. Request you to suggest to fix the issue.
Thank you for your cooperation.
Regards,
Rakesh Pradhan

Run time Error while executing Project Info system Reports (CN41/CN41N)

Hi,
I would like to inform while running project infosystems reports (CN41/41N / cns41 etc), it is taking long time & most of the time run time errors are coming. I observed due to more objects in projects, run time error is coming. Request you to suggest to fix the issue.
Thank you for your cooperation.
Regards,
Rakesh Pradhan

Hi,
I would like to inform while running project infosystems reports (CN41/41N / cns41 etc), it is taking long time & most of the time run time errors are coming. I observed due to more objects in projects, run time error is coming. Request you to suggest to fix the issue.
Thank you for your cooperation.
Regards,
Rakesh Pradhan

When trying to share my movie i get a error message The project could not be prepared for publishing because an error occurred. (-108)" pls help

when trying to share my movie on Imovie i get the following error. "The project could not be prepared for publishing because an error occurred. (-108)"
any idea why this has happened? How do i rectify this?

Hi
Error -108 memFullErr Ran out of memory [not enough room in heap zone]
Turn off - TimeMachine usually works - re-try.
(the Application down in the Dock - not the Device)
But this can mean many thing's - My first thought is
• Free Space on Start-Up hard disk. How much ? (other disks do not count)
Yours Bengt W

"Error in the dac kernel system" Error

I hope someone can help!
I have Diadem 10.2 logging external signals through a can card, which was working perfectly last week, but now if I try and get some data, it throws a message:
Error in the DAC kernel system
Unable to lock a memory space. (Error number: )
The machine has 1 Gb RAM, so I'm not sure what's happened.
Anyone got any ideas?

Hi ,
Please can you post the original Error message text?
Are you able to start at least one measurement without error?
Greetings
Walter

Document store access caused errors in the SAP Correction System

Hi Gurus,
I have this user who is trying to make changes to a workbook in DEV which is published to a folder with some users who are assigned to role. This user is the only user with Developer 2 role. When the user make changes and try to save the workbook to her role or favorites so that the changes are transported to BWP, the user is getting "Document store access caused errors in the SAP Correction System".
Do we have any suggestions/solutions, I would really appreciate any help on this.I would also assign full points for the most helpful answer.

I have exactly the same problem with the user who is trying to save the workbook, where he made minor change.
Any clues?
Thank you.
Vitaliy

Error writing the project file. Error loading type library / dll

Hi all,
I am trying to create a new portal project in PDK.NET. But I am getting this error- "Error writing the project file. Error loading type library / dll". Can anyone tell me how to solve this error.
rgds

I get this same error. Was working fine until I installed the SAP .Net Connector 2.0. Now it does not work even after it was uninstalled. Please help.

TS4002 Hello, icloud receive messages from gilly hicks, but does not receive messages from another personal account... this is happening me since one week and i dont know how to solve this.... error in the mail delivery system says not valid IPv4 SMTP err

Hello, icloud receive messages from gilly hicks, but does not receive messages from another personal account... this is happening me since one week and i dont know how to solve this.... error in the mail delivery system says not valid IPv4
SMTP error from remote mail server after RCPT TO:<[email protected]>:
host mx6.me.com.akadns.net [17.158.8.114]: 550 5.7.0 Blocked - see https://support.proofpoint.com/dnsbl-lookup.cgi?ip=184.173.9.56:
[email protected]
i do alse receive from gmail....
please help... what is happening!!!!

Just to recap, this is a collection of ports I have collected over time for people who needed this information when setting up the HP ePrint app so that they could view their email from within the app. I am certain other applications also need this information. Although lengthy, I could not find a more comprehensive place to retrieve this information. Feel free to post additional information, faulty information, or other related topics below as this is simply a collection of data and it would be practically impossible to test all of them. Thank you!
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Please help with "Error writing the project file. The specified module could not be found." error.

I am a student. I've been trying to install and use Visual Studio 2013 Professional for three weeks now and I cannot get it to work. I am now two weeks behind in my Visual Basic class. I've installed, uninstalled, ran the repair option...
I've tried everything I know how to do. I just spent 45 minutes on the phone with Microsoft, was transferred four times and finally told I will have to use the forums to find an answer. I'm almost completely out of patience with this.
I got the software through the Dream Spark program as a student. I installed it with the web installer and it appeared to install fine. When I try to create a new project, I get the error: "Error writing the project file. The
specified module could not be found."
When I exit the application, I also get: "The automatically saved settings file 'c:\users\user\documents\visual studio 2013\Settings\CurrentSettings-2015-02-02.vssettings' is not available for write. You can change this file on the 'Import
and Export Settings' Tools Options page."
Please tell me you can help.

Hi,
could you please try the points mentioned here:
http://social.msdn.microsoft.com/Forums/en-US/vssetup/thread/0376db8f-4761-4ae5-9af2-98c53216318a#VS_IDE_unexpected_problems to eliminate the possible cause of your issue?
Please update the result in the forum after you try the method above!
Best Wishes!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.

Getting Communication error with the external tax system(VERTEX_MS0018)

Hi All,
I am a new SAP HCM self learner. I am practicing it on company's sandbox system. When I am trying to create a company and saving the address, it is returning Communication error with the external tax system(VERTEX_MS0018). I have already tried to solve is issue by going thru previous related to same issue like
Communication error with the external tax system (VERTEX_MS0018) ...Urgent
but coudn't solve the issue.
Please help. Is this issue coming as I am using a training environment? any alternate approach?

Hi Ravi,
To disable the connection to Vertex:
Goto tcode SPRO > Cross Application Components > Transaction Tax Engine >
Technical Settings> Define External Tax System
Here an RFC would be defined. Remove it and try again.
Also in SPRO > Cross Application Components > Tax Determination based on Jurisdiction Codes > External Tax Jurisdiction > Activate External Tax Jurisdiction.
Remove the entry 'V' here.
Regards,
Srikishan

Communication error with the external tax system(vertex_ms0018)

Hi All
I have installed ECC6 IDES S/W on my PC. I have activated SAP Insurance module (FS-CD). When I try to create business partner using FPP1 with US address, It is throwing error as follows:
"communication error with the external tax system(vertex_ms0018)"
I dont want to use any external Tax system like Vertex etc. because I am not calculating any taxes.
I gave correct US address with valid ZIP etc. but no use.
Please help me if any one of you has idea. How to overcome this error. How to deactivate connection to external tax system.
Your help will be greatly appreciated.
Thanks
Giri

Hi Giri,
I've notice that you took the 'V' from the configuration but you left the RFC destination.
Clearly the RFC destination is not working thus the reason you get the error (in your case, your server can't determine a valid IP address for the host iwdf8334.wdf.sap.corp).
To sort out the problem you got I can think of at least two ways:
1. Get the RFC connection working (get the correct setup for it) using transaction SM59
2. Or if you don't really need the external tax calculations, remove the RFC configuration from TAXUJ under Assign RFC Destination to Country on the Cross-Application SPRO entry.
3. You can always add TAXUS to transaction OBBG if you require it (as it comes out of the box).
This should fix the problem you are having but I'm assuming you don't need the external tax calculations.
If you do, just fix the connection using SM59 (you may want to ask for help from your Basis team if you don't know how to do it).
Cheers
Jorge Laranjo
[email protected]
+44 741 847 5946

Info system report setting

This is regarding info system setting
Transaction code : OMO9 , Currently we are having the setting of Monthwise Report .. We want to convert the same to Daywise .. what are the implication ..?? what about earlier data which were updated as monthwise..Kindly put the light on these issue
Thanks in advance

Hi,
You can customise using OM02....
For more information please refer the below link...
http://wiki.sdn.sap.com/wiki/display/ERPSCM/MM-SRVLogisticsInformationSysteminExternalServices
Regards,
Udaya.

Premiere cs6 unknown error during the project manager operation

It appears this is an ongoing issue that needs to be addressed by Adobe.
I remember back in CS3 this was an issue and it still appears to be unresolved. I'm using a Windows 7, HP Z workstation with Quadro FX graphics card, plenty of Ram, with an efficient RAID system. I need to provide a complete project (with files folder & assets in a central folder - maybe even trimmed assets) to my clients. The Project Manager create Trimmed Project continually fails, as well as Collect files and Copy to New Location. Following the Adobe instructions, no screensaver, turn off Premiere Autosave, don't use other programs that will impact machine usage - the results are still the same - unknown error - PLEASE ADDRESS THIS ISSUE ADOBE ! ! ! ! So my question is, When will Adobe address this issue?

This forum is mostly other users, with a "few" Adobe employees
You may need to contact Adobe directly... if some other user does not have a solution
Adobe contact information - http://helpx.adobe.com/contact.html

Install Windows 2008 R2 KMS Key Error "0xC004F050 The software licensing service reported that the product key is invalid"

My KMS server is running on Windows Server 2012 R2 and activated by Server 2012 KMS Key.
I would like to use the KMS server to activate many Windows 2008 R2 server, however, Error message "0xC004F050 The software licensing service reported that the product key is invalid" is appear when adding Windows Server 2008R2 KMS Key. The Windows
Server 2008 R2 KMS key is confirmed and validated by Microsoft Telephone service.
Command used:
slmgr /ipk <Windows Server 2008 R2 KMS Key>
Anyone can help? thanks.

Hi Samson,
Based on my research, we need to choose associated KMS key based on the highest product being deployed in the product grouping hierarchy.
To choose the right Volume License key, please refer to this article:
How to Choose the Right Volume License Key for Windows
Please type the cmd "slmgr /dlv" on KMS Host and check if it has been activated successfully.
After configure KMS host, By default these KMS client computers will query DNS and locate your KMS host and activate
KMS Client Setup Keys
To reset computers to be KMS clients type the following at elevated command prompt:
Slmgr.vbs /ipk xxxxx-xxxxx-xxxxx-xxxxx-xxxxx
Where xxxxx-xxxxx-xxxxx-xxxxx-xxxxx is the generic VL key from the following link.
https://technet.microsoft.com/en-us/library/jj612867.aspx
For more detailed information to activate KMS client, please refer to the article below:
Installing KMS Hosts
Configuring KMS Clients
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Default report display for Project Info System: Progress Analysis Report

T-Code: CNE5
At the Progress Analysis Initial Screen, I chose the fields from the menu Views > Choose Fields, Then I saved the Variants as Test_Variant ( GoTo > Variants > Save Variants )
Every time I run the report, it will run the Test_variant but once I logout and login again to run CNE5 Test_variant will not be used.
Can I set the default variant, so that every time I logout and login and run the Progress Analysis(cne5), Test_variant will be used as default.
Appreciate advise
Thanks.

If you want the same variant should default to all the users then you can assign the variant in SE93 to transaction CNE5. write your variant there-->save.
Other option is to look at possibility of creating screen variant using transaction SHD0 for CNE5. Take help of ABAP in this case.
Regards
Nitin

Error in the "Project Info System" report

Similar Messages

Maybe you are looking for