Error in the report for costumers in Crystal

In the Crystal Sales Report whenever a user tries to display the results from all the customers when entering the values in order to display a report for a particular customer, the scroll only shows customers starting from letters A to M instead of showing all corresponding letters (from A to Z).
Does anybody know what the problem and/oor solution might be??
We sure appreciate your help!!
Thanx!!

it shows 800 only
since the customers is higher (2000)  it is better to use static parameter than dynamic
Thanks
Krish

Similar Messages

  • How can I run the report for different input values at the same time?

    Reports version: Report Builder 6.0.8.13.1
    Oracle version: Oracle8i Enterprise Edition Release 8.1.7.0.0
    I want to run the same report for different input parameter values and spool each o/p to different file and ftp to a server. For this, as a first step, I am spooling different input values in to a file, reading those values through a loop and calling the report for that input values. Each report run/execution is taking 15 minutes. Total report execution is taking approximately 4 hours (assuming 16 different input values) to complete. So I have to wait 4 hours to see ALL outputs.
    I would like to run the report parallel for ALL the input values and I should be able to see the ALL outputs with in 15 or 16 minutes.
    In my shell script, I added & symbol at the end of the report call to start/run the job in the background. Due to this the control passed to the next step after the report call. At this place I have an ftp command to send the output file to a different server and it is giving error some thing like “o/p file is not available/created yet". This is due to the fact that report writer is NOT yet completely started/initiated or it is NOT completed the spooling.
    How can I run the report at the same time for all the input values and save the time?
    Thanks in advance.
    Kishore.

    Increase the number of server engines running right now it seems there is only one engine running ,increase it to 4 or 6
    and then atleast 4 or 6 reports will run simultaneously.
    For FTPing the output add to your sript to check whether it is locked and if not then only try to ftp .
    Also for more better functionality read the document (chapter 15 ) for 10g reports for its new fuinctionality.
    http://download.oracle.com/docs/cd/B14099_17/bi.1012/b14048/toc.htm
    Thanks
    Subodh

  • Need to run the report for All Values when Null is passed in parameter

    Hi All,
    In my BIP report, I am using a parameter :asset with Type as Text, which means user will type the values for the parameter in the text box.
    Now, this parameter can take multiple comma separated values. I have a requirement to run the report for All Values when user doesn't enter any value in the parameter text box and if user enters any value(s) then the report will run for those values . The way, I tried to handle that in the query using couple of ways was :
    IMP : My Database is SQL Server
    where
    (table.asset = isnull((:asset), table.asset) or table.asset in (:asset))
    Now this works fine when I give a single asset number but when I give multiple values separated by comma like 123, 345 in the text box, then the statement fails saying 'encountered ,'
    I also tried simply
    table.asset in isnull((:asset),table.asset) -- but this doesn't work as it doesn't allow me to use in operater while using isnull and if i will use = operater then it won't work in case of multiple values
    Any suggestions on how can I handle this? Any help would be highly appreciated.
    Thanks,
    Ronny

    thanks for replying, but i tried this option too, it did not work for me, neither isnull nor coalesce. I mean, the solution work for single value but when i pass multiple values then separated by a comma then it doesn't work and shows me an error like "Incorrect Syntax ','". I am using SQL server as DB and bip is 10.1.3.4.1
    also please share the SR number, so i can also check the same.
    can there be any other work around to this?
    thanks,
    ronny

  • Error on Bursting Report for BI Publisher

    hi all,
    i am getting the following error when i am bursting the report for BI Publisher.
    * Nested Exception (Underlying Cause) ---------------
    oracle.apps.xdo.servlet.scheduler.ProcessingException: java.lang.NullPointerExce
    ption
    at oracle.apps.xdo.servlet.scheduler.XDOJob.runBurstingReport(XDOJob.jav
    a:2116)
    at oracle.apps.xdo.servlet.scheduler.XDOJob.execute(XDOJob.java:358)
    at org.quartz.core.JobRunShell.run(JobRunShell.java:195)
    at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.j
    ava:520)
    Caused by: java.lang.NullPointerException
    at com.sun.java.util.collections.Hashtable.get(Hashtable.java:321)
    at oracle.apps.xdo.batch.bursting.ProcessEnterpriseDocument.processLayou
    t(Unknown Source)
    at oracle.apps.xdo.batch.BurstingProcessorEngine.addDocument2Queue(Unkno
    wn Source)
    at oracle.apps.xdo.batch.BurstingProcessorEngine.createBurstingDocument(
    Unknown Source)
    at oracle.apps.xdo.batch.BurstingProcessorEngine.endDocument(Unknown Sou
    rce)
    at oracle.xml.parser.v2.XMLContentHandler.endDocument(XMLContentHandler.
    java:119)
    at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingP
    arser.java:311)
    at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:263)
    at oracle.apps.xdo.batch.BurstingProcessorEngine.burstingRequest(Unknown
    Source)
    at oracle.apps.xdo.batch.BurstingProcessorEngine.process(Unknown Source)
    at oracle.apps.xdo.servlet.scheduler.XDOJob.runBurstingReport(XDOJob.jav
    a:2008)
    ... 3 more
    Kindly Help..
    Thanks.

    Thanks alot Guru for u r reply, i am attaching more Details regarding my error.
    In Reporting options i gave
    Reporting folder CCB
    Reporting server:BIPUbliser url
    Reporting password:Admin     
    Reproting userid:Admin
    I already configured Bill Display Algorithm OBLD_CRYS in installation-frame work
    Now i am getting the error the value in the field is not a valid value for the field.
    In Console I am getting the error '
    SYSUSER - 612791-31-1 2011-05-26 11:32:21,709 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] ERROR (schema.rules.BusinessObjectRuleProcessor$Factory) There is more th
    an 1 MO for the service 'CILCSVAP': MaintenanceObject_Id(SA), MaintenanceObject_Id(CM_CONT), using 1st one 'MaintenanceObject_Id(SA)'
    <May 26, 2011 11:32:22 AM IST> <Error> <HTTP> <BEA-101020> <[ServletContext@4736418[app:SPLWeb module:/spl path:/spl spec-version:2.5]] Servlet failed with Exception
    com.splwg.shared.common.ApplicationError: (Server Message)
    Category: 3
    Number: 501
    Call Sequence: ;CIPCSVAP
    Program Name: CIPCSVAP
    Text: You are not allowed access (directly/indirectly) to this account.
    Description: Please contact your security administrator to check your security for this account.
    Table:
    Field:
    at com.splwg.base.support.context.FrameworkSession.addError(FrameworkSession.java:1177)
    at com.splwg.base.support.context.FrameworkSession.addError(FrameworkSession.java:1158)
    at com.splwg.base.support.cobol.CobolSubprogram.populateError(CobolSubprogram.java:142)
    at com.splwg.base.support.cobol.CobolSubprogram.checkForErrors(CobolSubprogram.java:94)
    at com.splwg.base.support.cobol.AbstractCobolProgram$CallCobolClosure.run(AbstractCobolProgram.java:214)
    Truncated. see log file for complete stacktrace

  • Where should I move the report for my form to be able to see it

    I need to run a report from my 9i form. I'm suing run report object.
    I'm repeatedly running into the error FRM-41219 cannot find report - Invalid ID
    where should i copy my rep file under 9ids for my form to be able to see it.
    Thanks

    Frank
    REP-0503 "You did not specify the name of a rep
    I created the report object in my object navigator, selected the report filename and in my when button pressed I have the following
    DECLARE
         REPID REPORT_OBJECT;
         V_REP VARCHAR2(100);
         REP_STATUS VARCHAR2(20);
    BEGIN
         REPID := FIND_REPORT_OBJECT('REPORT125');
    V_REP := RUN_REPORT_OBJECT(REPID);
    END;
    This gives me the following error
    REP-0503 "You did not specify the name of a report".
    Now I change the execution mode to runtime, and communication mode to asynchronous and I dont get the error, but the report does not come up either.
    Please Help

  • Error in the report processing unit.

    Hi,
    we have installed BO Edge 3.1 on SuSE Linux Enterprise Server 10 SP2 (x86_64) under VMware. All works fine, but the scheduling is not stable. We schedule a Crystal Report 10 times, but only 1 or 2 times the run is successfully. The option "View" doesn't make any problems.
    The error messages are "Error in the report processing unit." or "Error in File UNKNOWN.RPT: Unknown Database Connector Error Details: crystalenterprise12.sessionmgr.1: The property SI_GUID of info object with id number 20822 is not unique. Table = 'CMS_InfoObjects6'. Column = 'SI_GUID'."
    Have anyone the same experiences?
    Regards,
    Thomas Windischmann

    Thomas,
    Check the following link also.Because there could be chance of getting this error because of VM ware, linux versions.
    Re: OCA_Abuse exception 7711 at [exceptionmapper.cpp : 77]
    And also try to publish the report to CMC and access from infoview.
    Thanks,
    Anil

  • TS2518 Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library  it says There was an error opening the database for the

    Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library  it says There was an error opening the database for the library. I have tried every thing. I updated the other libr but now it will not open the main to update. What do I do?

    Try starting Aperture with the command and option keys held down.  You'll get 3 options.
    Try each, starting at the top, in order, checking after each to see if it fixes the issue.

  • "There was an error opening the database for the library "~/Pictures/Apert"

    Hey everyone,
    There's already another discussion thread about this at the link below, but the problem was never actually resolved. http://discussions.apple.com/thread.jspa?threadID=2343014&tstart=0&messageID=116 67261#11667261
    So I stumbled across this problem where Aperture 3 will display the following error when opening the image library.
    There was an error opening the database for the library “~[path]/Aperture Library.aplibrary”.
    One user suggested navigating to the actual library, and ⌘⌥-clicking the library to open it with the Aperture Library First Aid dialog. This however, did not work for me. I still received the error messages upon ⌘⌥-clicking the library.
    Here's a little hack I discovered for those of you still struggling. It doesn't fix the problem (leaves quite a large dent remaining actually), but hopefully someone can cultivate what little I discovered.
    ⌥-click Aperture (not the library)
    You should get to the library selection dialog box. Create a new library (bottom right corner) and remember the location of the new library. Put a few random pictures in the new one.
    Close Aperture
    ⌃-click both the old and new libraries and "Show Package Contents."
    Open the folder "Database" in both libraries.
    Cross check the folders to see if the old library is missing files that are in the new library. If your old library is missing some files (mine was), drag the missing files from the new library to the old one.
    Close both folders.
    ⌘⌥-click the old library.
    NOW, I got the Aperture Library First Aid dialog.
    Rebuild the library (3rd option)
    Wait a while.
    Aperture should open up with a folder named "Recovered Folder." Within this folder will be a SINGLE project named "Recovered Project" with ALL the images from your old library. There may be a few albums there too, but mine were all empty so it didn't matter in my case. To my knowledge, I lost all the adjustments I performed too.
    This is as far as I got. I have much of my library backed up, so I only needed to copy the most recent photos into the backup. I am NOT reorganizing and re-editing pictures in this one!
    As Aperture is a photo-organizing and photo-editing software, I understand that this by no means fixes the problem, since you lose all organization and editing. But it enables one to at least view the images lost. Hopefully a more knowledgable hacker else can figure out how to fix this completely. Unfortunately, I simply don't have the time to continue messing with this.
    Good luck to anyone else having issues! I understand the frustration you must be facing, its freaky having years worth of images simply disappear! After this incident, I'm definitely going to configure Time Machine to perform more frequent backups, since my latest backup was already a couple weeks old.

    Hey All,
    To my horror I have a similar problem and your solution didn't seem to help. To be specific, I get the error:
    "There was an error opening the database for the library “~/Pictures/Aperture Library_2.aplibrary" Everytime I try to run Aperture. This happened because my Apple computer shut off completely (due to bad battery) while importing photos from a memory card.
    I've tried "option + command" while clicking the aperture application and that gave me the same error message without any other option except to quit the program. I tried "option + command" and clicked the library package but that didn't work either. I tried creating a new aperture library, opening it which I did successfully, and then switching to my main one but that didn't work.
    Does anyone know away to get it to work again and have the edits still there?
    I'm a professional photographer and have thousands of photos or so in the library so this is distressing. The master files for the photos are located on an external hard drive, but I'm not sure how to access them in aperture. Are all the edits on the photographs are in the external hard drive or the aperture library. Is there any other way to resolve this issue without losing the edits?
    Does apple have a support number I can call? Any help would be greatly appreciated!!

  • I have three aperture libraries. But just recently two of them (old from 2011) will not open. I get the following error: There was an error opening the database for the library "~/Pictures/Family IIi.aplibrary". Please help, thanks

    I have three aperture libraries. But just recently two of them (old from 2011) will not open. I get the following error: There was an error opening the database for the library “~/Pictures/Family IIi.aplibrary”. Please help, thanks

    Are all three libraries under your account or are they in different accounts? Any other errros on the system?
    Start by doing the permission repair and library repair steps in Aperture 3: Troubleshooting Basics

  • ICal error "400" the request for account fail!!

    iCal on my Macbook keeps on popping up with the following:
    The server responded with an error.
    The request for account “myemail (at) yahoo.com” failed.
    The server responded with
    “400”
    to operation CalDAVCalendarSplitDualTypeCalendarQueueableOperation.
    I don't even have a calendar account with my yahoo account, since I use my gmail and iCloud calendar. I went into system preferences and made certain the "calendars" option was unchecked for my yahoo account in the Internet Accounts page. Nonetheless, iCal pops up with the same error message multiple times within the hour. I'm not sure why iCal is even requesting for my yahoo calendar, since I have never used it in iCal since day one. Any ideas?

    Just out of curiosity, did you install FileZilla recently? The install comes with malware called Speedial. You may have noticed that your default search engine in all browsers is set to Yahoo, and furthermore impossible to override via the normal course of action.
    Removing Yahoo from local apps is easier than resetting them. All I had to do was delete the (added without my consent) Yahoo account from System Preferences, and the iCal Yahoo calendar disappeared momentarily.
    For resetting Safari, look here: Reset Safari Settings/Preferences

  • IPhoto frustrating error..The volume for "Df23.JPG" cannot be found. It prompts for all photos with this issue rather than offering an option to ignore. I can find the images in spotlight but not in Find Photo. Does anyone have a solution

    iPhoto frustrating error..The volume for "Df23.JPG" cannot be found. It prompts for all photos with this issue rather than offering an option to ignore. I can find the images in spotlight but not in Find Photo. Does anyone have a solution?

    Unless you have the source files that were on the TC or Windows machine you will have to start over with a new library as follows:
    Start over from scratch with new library
    Start over with a new library and import the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from your original library as follows:
    1.  Move the existing library folder to the desktop.
    2. Open the library package like this.
    Click to view full size
    3. Launch iPhoto and, when asked, select the option to create a new library.
    4. Drag the Masters (iPhoto 11) folder from the iPhoto Library on the desktop into the open iPhoto window.
    Click to view full size
    This will create a new library with the same Events as the original library but will not keep the metadata, albums, books slideshows and other projects.  Your original library will remain intact for further attempts at fixes is so desired.
    OT

  • Error in the configuration for sap logon tickets

    Hi Forum,
    I use Tcode crmd_order_bp to see the BP cockpit and the error message displays as
    <b>Error in the configuration for SAP logon tickets</b>
    But if I click "Yes", system displays cockpit.
    How can I avoid this error.
    Thanks in advance
    Regards
    Shridhar

    You will still need to configure SSO (either by logon ticket or username/password). The data source access is done using the username/password configured in the UM Config dialog box.
    I can see where you're coming from with your thinking, however logon-ticket-based SSO is probably the best approach.
    Cheers,
    Darren.

  • Error in the instructions for performing a silent install

    There's an error in the instructions for performing a silent install of Photoshop Elements:
    http://helpx.adobe.com/photoshop-elements/kb/silent-install-instructions-photoshop-element s-1.html
    In step 9, the instructions say to use the following command line:
    start /wait "path to Setup.exe" /UL%LangCode% /V“SERIALNUMBER=%AOO volume license serial number%"
    The correct command line, however, is this:
    start /wait "path to Setup.exe" /UL%LangCode% /V"SERIALNUMBER=%AOO volume license serial number%"
    See the difference? Look closely at the character after the /V. In the instructions on the website, they put in a "curly quote" character. This obviously needs to be a straight quote.
    Interestingly enough, the erroneous command line from the web site will actually work just fine as posted if all you are passing in the /V is the serial number. If, however, you wanted to add a "NODESKTOPICON=1" to disable the creation of a desktop shortcut, for example:
    start /wait "path to Setup.exe" /UL%LangCode% /V“SERIALNUMBER=%AOO volume license serial number% NODESKTOPICON=1"
    then it fails to run silently.
    I post this in the hopes that Adobe will fix the typo in their instructions and save other admins the hours of grief I've been put through today trying to get this working.

    Check the response file where you define the SGA memory size for the new database.
    You can also choose not to create the database at the installation and do it afterwards, making a specific response file for it. (I'd recommend specially this option. like that you can separate possible installation errors with the ones on the DB creation process).
    Good luck.
    Regards,
    Enric Moya

  • I downloaded Aperture and now I'm getting a "There was an error opening the database for Library " and I can't do anything else.  How can I fix it so I am once again able to run Aperture?

    I Downloaded Aperture from the Apple Website then proceeded to download all my picture's frp, IPhoto.  The very next time I opened Aperture an error poped up stating, There was an error opening the database for Library "blank".  I can't do anything with the program but hit the cancel buttom which closes the program.  How do I fix it?

    Is "blank" the name of your Aperture Library? If not, then Aperture is pointing to the wrong Library. Hold down the option (⌥) key while you launch Aperture by clicking it in the Applications Folder. Then select the correct library and press the "choose" button.
    If that does not help, try to repair your library:
    Locate Aperture library in Finder. Holding down the keys option (⌥) +command (⌘) and double click on Aperture Library to show the First Aid dialogue:
    Then try to start Aperture again.  If that also should fail, try the other steps in Aperture 3: Troubleshooting Basics: http://support.apple.com/kb/HT3805
    Good Luck
    Léonie

  • HT4623 I tried to update my ipad air to IOS 7.1 but it shows error that "The software for the iphone was corrupted during download" How can I fix this problem ?

    I tried to update my ipad air from IOS 7.0.4 to 7.1 on iTunes. I clicked download and update, it started to download normally but when download finished iTunes shows error that "The software for the iphone was corrupted during download".
    How can I fix this error ?

    I had the same problem. In the end I downloaded it manually. Here's the steps assuming you are on a Mac and have an iPad Air (Wifi). If not you can find other restore links here.
    In the terminal (it kept failing to download in Safari):
    curl http://appldnld.apple.com/iOS7.1/031-4521.20140310.D2Ydl/iPad4,1_7.1_11D167_Rest ore.ipsw >>~/Desktop/iPad4,1_7.1_11D167_Restore.ipsw
    Once the file has downloaded, move it to ~/Library/iTunes/iPad Software Updates/
    Quit and relaunch iTunes.
    Should now work for you.

Maybe you are looking for