Error in the RFC LCRSAPRFC and SAPSLDAPI
Hi,
The RFC LCRSAPRFC and SAPSLDAPI TCP/IP connection to strike up and all SOAP interfaces stops in XI environment.
Yesterday the same problem occur. I checked if user is lock but not locked. Just after I restarted the environment (stopsap and starsap) and I made refresh full cache http://brjgs916:50100/CPACache/refresh?mode=full
the RFC´s TCP/IP LCRSAPRFC/SAPSLDAPI back to work.
The problem is intermittent occurs almost all days.
I found and implemented the notes 314530 and 316877 but I think this notes cannot solve this problem.
My XI environment is kernel 700 patche level 95 and Stack ABAP and Java
11, HP-UX with Oracle 10g.
Thanks so much for your attention
Douglas Brisola
Is the SLD running on the same server?
We had a similar issue and the hardware the SLD was running on was, er, unreliable! The availability is much better these days!
Similar Messages
-
ERROR in the RFC communication when parabatch is set to more 3 (default)
Hi experts,
We have a 10 blades BIA system connecting to our BW Production. When we set the parabatch to more than the default 3 (we set to 4 or 5), We keep getting 'Batchpara Error' and 'Error in the RFC Communication: Error when opening an RFC Connection' during the initial index build. Here are what we do and what we see:
1. set parabatch to 5 and build 1 initial index (cube is 46 mil rows, 22 GB in size) - Failed with the above errors
2. set parabatch back to 3 and build 1 initial index (same cube as above)- successful but slow
3. set parbatch back to 3 and build 2 initial indexes simultaneously (16 mil rows/4GB and 6 mil rows/2 GB) - Failed with the above errors.
In the BIA index log I see the following error:
Error in the RFC communication: Error when opening an RFC connection (TREX_BIP)
Message no. STREX005
In SM37 in one of the logs I see the followings:
Parabatch Error
Any light you can shed on why we are encountering this issue will be much appreciated. Also, I observed that there is a long idle time in all systems (BIA, DB2, BW) and seemed like their respective resources were not utilized at all. Once in a while I do see surge of cpu/memory usage in all systems but not too terrible. I'm puzzled by why there is such long interval of idle time in all systems while the initial index build is going on.
BTW...we did the same thing (set parabatch to 5, and run parallel initial builds) in our non-prod BIA (2 blades) and QA BW landscape and do not have any issue at all.
Thanks!
KeeHello
PLease check the sapnotes and check the developer trace for more information.
Note 314530 - Number of RFC/CPIC connections for external clients
Note: 1070034
It can also be because your system has reached it its max gateway connections...also check whether you are getting error message "Communication error, CPIC return code 017, SAP return code 450
" in sm21 ???
Regards
Karthikeyan.K -
Hi friends. I've some problems when we generate PDF Files from the BI server, that run the PDFs in other ADS server. The error into the Visual Admin --> Services --> Destinations --> Aba Runtime --> HTTP and when I click in the RFC "save and test" I get this error: "Error during ping operation:Error while silently conncecting:org.w3c.www.protocol.http:HttpException:org.w3c.www.protocol.http:HttpException:Unable to contact target server mybiserver.net:8000 after 1 tries."
When I change in the RFC the number of the port to 50100, than run ok, but it's not correctly. It needs to run in the 8000 port. Can anybody help me? Thanks !Marcos,
I am also facing the issue. Did you find a solution for this? If so, please let me know your findings.
Regards,
Ramesh -
Error starting the Application Server and Deployment Tool
After installing the iPlanet Aplication Server with sp3 I get the following
errors starting the Application Server and Deployment Tool.
iAS Application Server
================
GXBindInit: GXBindBasic failed
GXContextInit: GXBindInit failed 2
[26/Out/2001 17:46:49:8] error: ENGINE-context_init_failed: EngineClassSpace
ContextModule.createContextInit failed:
error: could not get context
*** Errors in initialization from registry ***
Errors in initialization, exiting ...
iAS Deployment Tool
===============
GXBindInit: GXBindBasic failed
GXContextInit: GXBindInit failed 2
[26/Out/2001 17:23:40:7] error: ENGINE-context_init_failed: EngineClassSpace
ContextModule.createContextInit failed:
Exception in thread "main" java.lang.NullPointerException
at com.kivasoft.util.Util.loadComponent(Unknown Source)
at
com.iplanet.ias.tools.buzz.ui.application.StartBuzz.initGDS(Unknown Source)
at com.iplanet.ias.tools.buzz.ui.application.StartBuzz.main(Unknown
Source)
Can anyone help me please!Hi,
Would be more helpful if you can mention, the O/S. Also, pls mention where
you are getting this error, at kjs or kxs, or, are you able to start the server
and at which specific instance do you encounter this.
Regards
Raj
"Antonio Casqueiro" wrote:
After installing the iPlanet Aplication Server with sp3 I get the following
errors starting the Application Server and Deployment Tool.
iAS Application Server
================
GXBindInit: GXBindBasic failed
GXContextInit: GXBindInit failed 2
[26/Out/2001 17:46:49:8] error: ENGINE-context_init_failed: EngineClassSpace
ContextModule.createContextInit failed:
error: could not get context
*** Errors in initialization from registry ***
Errors in initialization, exiting ...
iAS Deployment Tool
===============
GXBindInit: GXBindBasic failed
GXContextInit: GXBindInit failed 2
[26/Out/2001 17:23:40:7] error: ENGINE-context_init_failed: EngineClassSpace
ContextModule.createContextInit failed:
Exception in thread "main" java.lang.NullPointerException
at com.kivasoft.util.Util.loadComponent(Unknown Source)
at
com.iplanet.ias.tools.buzz.ui.application.StartBuzz.initGDS(Unknown Source)
at com.iplanet.ias.tools.buzz.ui.application.StartBuzz.main(Unknown
Source)
Can anyone help me please! -
Error starting the Application Server and Deployment Tool in Windows 2000
After installing the iPlanet Aplication Server with sp3 in Windows 2000 I
get the following
errors starting the Application Server and Deployment Tool.
iAS Application Server
================
GXBindInit: GXBindBasic failed
GXContextInit: GXBindInit failed 2
[26/Out/2001 17:46:49:8] error: ENGINE-context_init_failed: EngineClassSpace
ContextModule.createContextInit failed:
error: could not get context
*** Errors in initialization from registry ***
Errors in initialization, exiting ...
iAS Deployment Tool
===============
GXBindInit: GXBindBasic failed
GXContextInit: GXBindInit failed 2
[26/Out/2001 17:23:40:7] error: ENGINE-context_init_failed: EngineClassSpace
ContextModule.createContextInit failed:
Exception in thread "main" java.lang.NullPointerException
at com.kivasoft.util.Util.loadComponent(Unknown Source)
at
com.iplanet.ias.tools.buzz.ui.application.StartBuzz.initGDS(Unknown Source)
at com.iplanet.ias.tools.buzz.ui.application.StartBuzz.main(Unknown
Source)
Can anyone help me please!Okay, pls check that you are logged in as administrator and installed and now you are logged in as administrator and registering the iAS server. Did you get any installation failures while installing and are you able to register the server using iASAT ?
-
I just downloaded Mountain Lion and everything is working great. But i keep getting an error in the app store and i can't download 'Pages' or any other apps. I keep getting an "error" and it says credit card processing is temporarily unavailable......help
Try deleting the cache associated with the App Store.
Quit the App Store if it's open.
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type this exactly as you see it here:
~/Library/Caches/com.apple.appstore/Cache.db
Click Go
Move the Cache.db file to the Trash.
Launch the App Store. See if that made a difference... -
Lumira Login Error "Check the Server Name and Instance ID"
Dear Experts
I installed Lumira Desktop and was able to connect to the
HANA Server.
Later while I was working the software hanged and I had to
shut it down.
Now, after re-opening the software I receive error "Check the Server Name and Instance ID"
(though the server credentials are same as error and correct”
Any suggests on how to rectifyI wonder if one of the following KBAs may give you a clue?
1995325 - Error HDB 11009: The dataset could not be published to SAP Lumira Server because publishing to the SAP HANA layer failed. Lumira Server
2134259 - Lumira LaunchPad Logon Hangs
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow me on Twitter (#SAPLumira)
Got Enhancement ideas? Use the SAP Idea Place -
CreatePDF printer File shows ERROR in the status column and will not upload to my account
When printing to the CreatePDF printer. the file shows ERROR in the status column and will not upload to my account
Adobe retired this Feb 17, 2014.
This app sent content to and got content from the web based services of "CreatPDF" and "PDF Pack".
These are subscription services out in "the cloud". When the app was live you had to be online and signed into your account. The user forum for CreatePDF has a DOC that speaks to the app removal.
Be well... -
Every time i try to start itunes it trys to backup my ipad and says an error stopped the program working and closes down??
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you! -
Getting error -1202 when trying to connect to 'My Wish List" in ITurnes. Says there was an error in the ITunes store and to try again later. Have no other problems connecting or purchasing......
This procedure is a diagnostic test. It makes no changes to your data.
Please triple-click anywhere in the line below on this page to select it:
ls -@Oaen L*/Coo* | pbcopy
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
Wait for a new line ending in a dollar sign ($) to appear below what you entered.
The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message.
The Terminal window doesn't show the output. Please don't copy anything from there. -
Hi Expert,
First, I'm sorry if I post in the wrong thread.
I have a problem when creating RFC Connection. I want to create RFC Connection between BW systems to R/3 System in SM59.
I already insert the right IP Address to the target system, but when I test the connection, I got this error :
host name 'SAP-BO-01' unknown / CPI-C error CM_PRODUCT_SPECIFIC_ERROR
I already test the connection from BW to R/3 and vice versa, using ping in command prompt, and I got no problem. Also, I already create a log on to the target system, and it was successful, but the RFC Connection still error.
Did you have any clue or solution about this?
I really appreciate every helpful comment from you. Thank You...Hi
Do you have mapping in the host file in the server? ask you basis team to check that.
If you can ping the server, that means connection is fine, only thing is there might be some entry missing in hosts or services file in the server.
During creation of RFC connection you can directly use the IP address also. as you said you are able to ping the server that means you got to know the IP address. Now use the below command to know the exact hostname.
ping -a <IP_ADDRESS>
Regards
Anindya -
Error found in RFC (target) and respective logon\logons are disabled.
Hi All,
So we have a requirement to use trusted connections for our EAM configuration and after setting up FFUser when the user login in to the system and execute GRAC_SPM we automatically get the message "Error found in RFC (Plugin System) and respective logon\logons are disabled." We saw note 1777094 that suggest to update validity and password of RFC user, but because this is a trusted connection there is no "RFC User" or in other words the user is the "Current user" of the session and note 1652880 is suggested as a possible fix for Non trusted RFC. Can anyone point me in the direction of what the issue is here?
we automatically get the messageHi Santosh,
Our problem was a mixture of not understanding correctly RFC objects and also when to use trusted vs standard connections. As shown in this link http://help.sap.com/saphelp_nw70/helpdata/en/6b/af429b12e9214d9a2d6cba921b162f/content.htm auth objects related to RFC are actually not included on the SAP profile (that was one of our problems) so our configuration for S_RFC was incorrect. Also using trusted connections is not mandatory any more to use EAM so at the end using Standard connections was a better approach. Hope that helps. -
Ok so i'm trying to burn a short 10-min-long film to a DVD via iDVD.... i've worked with it before and never had any trouble.
But i havent used it for 3 years now probably, and as i made the DVD menu and sub-menus for this project i worked normally
as i always did, it was easy and everything worked just fine.
The only difference this time is when i click "burn" it starts processing the menus but when it's done, instead of going to the next step which is
processing the slideshows, it automatically stops the burning and it says "there was an error during movie encording" idk why it always comes out,
what i'm doing wrongor if it just doesnt work anymore :S it also opens a new mini window that says "you have insterted a blank DVD.
Choose an action: (open finder) (open iDVD) (open iTunes) etc" so this tells me it's reading it...
i've picked all the options and it still doesnt work with any of those at this same point. I've also tried changing the preferences, the screen mode,
the video quality, EVERYTHING! nothing works! DX
anyone knows how to fix this?
it'd be truely appreciated!!!
Yours Truely, DANIELLA.So today, I deleted that original file (this gave me the ~18.5 GB free) off my internal HD and tried to burn the project.
So the DV file iMovie is using is on the external again? If so I assume iDVD knows that...
Have you tried making a disk image?
Suggest you create a disc image and then burn the DVD. File/Save As Disc Image...
http://docs.info.apple.com/article.html?artnum=164927
This will isolate any encoding/burning issues you may encounter. Once the disc image is created, double-click the .img and burn the virtual disc that should appear on your desktop, using Toast to burn the DVD. Disk Utility to burn the .img file. Usually, you can select a burning speed in Disk Utility.
There are variations to this process based on which OS X you are using...
Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (maybe the .img) in the left-hand window. Click the Burn icon. A new window should drop down and your SuperDrive tray will open after clicking the Burn icon. Insert a recordable DVD. (Verbatim DVD-R preferred by me.) Click the Close button. Wait. Select a burn speed. Then click the Burn button.
-->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and did change in Tiger.
Also, you can use DVD Player to play the virtual disk to check your iDVD project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD Media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
http://docs.info.apple.com/article.html?artnum=93006
You could go to the iDVD 5 group and search the group for that error code. There was plenty of those there. Not much here. -
Error in the 10.2 and 9.2 UTL_FILE documentation
The 10.2 and 9.2 documentation for the utl_file.fcopy procedure provide the wrong names for the first two parameters
http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/u_file.htm#i1003400
The 11.2 documentation correctly notes that the names of the first two parameters are SRC_LOCATION and SRC_FILENAME. But the 10.2 documentation refers to them as LOCATION and FILENAME. I've verified in a 10.2 database that the parameter names are actually SRC_LOCATION and SRC_FILENAME. I assume that the parameter names were also SRC_LOCATION and SRC_FILENAME in 9.2 but I don't have a 9.2 instance to test with.
JustinThanks for noting this specific case and raising the general issue of errors in books for "old" releases. In most cases (including, I would think, this one), acknowledging the error and fixing it for the current release and future ones is sufficient.
The following statement has been approved by some people in Oracle Database documentation management: "We usually make corrections only for the next revision of the book for the most current available release and for upcoming releases. If there is a strong business need to make corrections also to published versions of the book for previous releases, we consider that on a case by case basis." -
Error running the expiration action and The workflow is no longer available
I make a content type expiration policy with action is run a workflow. When the jobs run a have this error in the evnt viewer
Error running the expiration action on item http://xxxxx/xxx/New.docx.
Error: System.InvalidOperationException: The workflow with id=xxxx is no longer available.
at Microsoft.Office.RecordsManagement.PolicyFeatures.WorkflowExpirationAction.RunExpirationWithPostActions(SPListItem item, XmlNode parametersData, DateTime expireDate)
at Microsoft.Office.RecordsManagement.PolicyFeatures.BaseExpirationAction.Microsoft.Office.RecordsManagement.PolicyFeatures.IExpirationActionWithPostActions.OnExpirationWithPostActions(SPListItem item, XmlNode parametersData, DateTime expireDate)
at Microsoft.Office.RecordsManagement.PolicyFeatures.ExpirationTask.ExpirationActionData.RunExpirationAction(SPListItem item, DateTime expireDate)
at Microsoft.Office.RecordsManagement.PolicyFeatures.ExpirationTask.<>c__DisplayClass19.<ProcessExpiredItems>b__17(SPListItem item)
at Microsoft.Office.Server.Utilities.MonitoredScopeWrapper.RunWithMonitoredScope(Action code)
at Microsoft.Office.Server.Utilities.ContentIterator.ProcessItem(SPListItem item, Boolean fIncludeFolderItems, MonitoredScopeWrapper monitoredScopeWrapper, ItemProcessor itemProcessor, ItemProcessorErrorCallout errorCallout)Hi,
We have not heard from you in a couple of days.
Please post back at your convenience if we can assist further.
Best Regards,
Lisa Chen
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Lisa Chen
TechNet Community Support
Maybe you are looking for
-
can i hook it up in my acct and see if that works?
-
All files in an album won't import
I recently re-tagged a couple of my albums (Namely my copy of the Final Fantasy X soundtrack) that I had purchased prior to having an iPod. Now, iTunes won't import all the files (They are on the main hard disc, in a folder on my desktop). And with t
-
Size Limitation for ResultSet in JAVA
when i execute a query as ResultSet rs=st.executeQuery("select ....") It throws an error saying "Please Use Server Side Cursor for large resultset"... But when i execute the same in SQL Query Analyzer, it returns the row properly without any issue...
-
Screenshots will not upload for my new app
When I try to upload screenshots (before I submit for review) for the newest verrsion of app, the drag and drop and manual file loading does not appear to be working. I've rebooted my computer and it still does not work. When you use the "drag and
-
How i can use user-exit