Error in the Smartforms 'ERROR CANNOT BE CLASSIFIED'

Hi,
     While Executing the output type of ME23N (Custom Output type), I am Getting the Below Error,
     From Debugging i came to know that the error is from the Smartform,
     From the SFTRACE, I got the Following Log.
    00trace begin level 05
    00trace version 046C01
    00time stamp 20140424094323
    00locale date 24.04.2014
    00locale time 15:13:23
    00system information
    00 sap version 731
    00 operating system AIX
    00 database system DB6
    00 database name JEQ
    00 user name 90498
    05overflow of non main window
    05! E SSFCOMPOSER 150
    05trace output closed due to error
     From the above Log the I came to Know that the error is Not from the Main Window, So I have Checked all the Dimension of the the Windows, Every      thing is fine(With in the Page Limit).
     The error is Generating from this Code in the Smartform's FM.
     Please Suggest a solution.
     Thanks
     Kranthi.

Dear all,
Thanks for the Response, The Issue Is Solved.
There is No Overlapping of Wndows, In my Smart Form there are 2 Pages & both Contains Main Window. They Have Designed in Such a way that "TERMS & CONDITIONS" Should Come in Second Page, Kept the Control Command in the Footer of the Table.
If the Table Entries of the Main Window are Less(i.e., fits in the first page) then it is working fine.
So if the the Records are more and exceeds to the second page then the control commands also fires to the next page (Second page), Hence the error is rised.

Similar Messages

Can't install itunes - error message "the folder "itunes" cannot be found

Help. I just bought a new Iphone and can't get itunes to load. I had itunes on my computer for several years for my nano - haven't synced up in about a year. Went to open it and got the following error message
The folder "itunes" cannot be found or created and is required. The default location for this folder is inside Mu Music folder"
I have uninstalled everything - quicktime, apple mobile, every single file. I have rebooted, run searches to make sure there were no files at all left - did it through control panel, search etc., rebooted and downloaded it again (this make about 5 times now) and still get that same message that the folder cannot be found. Help! I just blew about $400 in the Apple store!
Can anyone help me?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

I just installed ITunes 11.0.4. I get the error message: "The Itunes Library cannot be saved. A folder was specified instead of a file." When I sign on next, it says the library can't be found. Running Windows Vista with Mcafe protection

I just installed ITunes 11.0.4. I get the error message: "The Itunes Library cannot be saved. A folder was specified instead of a file." When I sign on next, it says the library can't be found, and Itunes wont open. I'm running Windows Vista with Mcafe protection

Hi there Br0x,
You may want to try rebuilding the iTunes library as an initial troubleshooting step. Take a look at the article below for more information.
iTunes: How to re-create your iTunes library and playlists
http://support.apple.com/kb/ht1451
-Griff W.

HT4097 Help! Everytime I try to update my iPad 2 on 4.3.3 it get is error message "The iPad "iPad" cannot be restored at this time because the iPad software update server could not be contacted or is temporarily unavailable." I dont know why please help

Help! Everytime I try to update my iPad 2 on 4.3.3 it get is error message "The iPad "iPad" cannot be restored at this time because the iPad software update server could not be contacted or is temporarily unavailable." I dont know why please help.
I'm running 4.3.3 on a ipad 2 im computer is connected via wire to internet

See
iOS 5: Updating your device to iOS 5
http://support.apple.com/kb/HT4972
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect to your computer & click on the "Update your device using iTunes".
Tip - You may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. After you update to iOS 5.x, the next update can be installed via wifi (i.e., not connected to your computer).
 Cheers, Tom

Error message: The selected file cannot be linked because it has 6 audio channel(s) and the clip was

I recently purchased/upgraded from Premiere Elements 5 to Premiere Elements 9 and I cannot open the projects in version 9 that were created with version 5. It shows it as offline. I get a message to open up a file and when I do i receive the error message: The selected file cannot be linked because it has 6 audio channel(s) and the clip was created with 2 audio channels. Can someone help me or tell what I am doing wrong? All of my projects that were completed in version 5 cannot be opened up in version 9.
Thank you.

Bill,
I ran G-Spot on one of the files and here it what I have:
DVD "VOB" format
MPEG-2 Program Stream << { 1 vid, 1 aud }
Sys Bitrate: 10080 kb/s VBR
I guess I am really confused. The project that I am trying to open PrE 9 was completed in PrE 3 w/templates , scenes, etc. The movie was burned to a DVD. I cannot understand why I cannot open it with a newer version of PrE. According to G-Spot (I am assuming this is what you mean above), it is already in 2 channels. To me this should be ok. I put many, many hours into these videos and now it seems all for not.
Here is what I did so far:
I uploaded the required media files to a new project in PrE9 and let them index and conform. I saved the project with the same name in a different location. Do I have to do this to the project files and/or the original media files? Confusion starts here.
The next step is where I am confused. I do not know if I am proceeding in the right direction from here. There is the share tab in the upper right hand corner. Is this what you are talking about? I am truly lost from here.
Thanks.

PS CS5 error message, "The requested operation cannot be performed..."

When trying to save an image under the "save for web & devices" I get this error message, "The requested operation cannot be performed on a file with a user-mapped section open." I have the latest driver on my computer. For a while I would get this message now and then, now it is all the time.

I have this problem too. It only affects Photoshop. It doesn't happen every time I try to save for web, but it happens on all kinds of files, even new files that I have created from scratch in Photoshop. Sometimes, all I have to do is create a new file and click save for web, and I get the error.
It doesn't happen if I turn off my Antivirus program - Trend Micro Titanium Maximum Security.
So I would think it was a problem with Trend Micro, but it doesn't occur with any other program and I can save files with Photoshop, unless I use the Save For Web option.

ERROR! The following error occurred during request processing:build contro

Hi,
I am unable to request activation. Please help. It is a serious issue. following is the message.
public part "default" of component "sap.com/servlet" ... OK
               [PP "default" of DC 108 variant "default"][SC 623][last successfull build: 779]
          public part "strutsComp" of component "boc.com/struts" ... OK
               [PP "strutsComp" of DC 186 variant "default"][SC 621][last successfull build: 913]
          public part "default" of component "sap.com/com.sap.mw.jco" ... OK
               [PP "default" of DC 59 variant "default"][SC 623][last successfull build: 779]
          public part "log4jComp" of component "boc.com/log4j" ... OK
               [PP "log4jComp" of DC 188 variant "default"][SC 620][last successfull build: 779]
          public part "default" of component "sap.com/activation" ... OK
               [PP "default" of DC 34 variant "default"][SC 623][last successfull build: 779]
          public part "default" of component "sap.com/mail" ... OK
               [PP "default" of DC 99 variant "default"][SC 623][last successfull build: 779]
          public part "strutsAss" of component "boc.com/struts" ... OK
               [PP "strutsAss" of DC 186 variant "default"][SC 621][last successfull build: 913]
          public part "log4jAss" of component "boc.com/log4j" ... OK
               [PP "log4jAss" of DC 188 variant "default"][SC 620][last successfull build: 779]
     Synchronize used libraries... finished at 2007-12-19 12:16:21.792 GMT and took 3 s 625 ms
Prepare build environment in the file system... finished at 2007-12-19 12:16:21.792 GMT and took 9 s 609 ms
===== Pre-Processing ===== finished at 2007-12-19 12:16:21.792 GMT and took 10 s 515 ms
===== Processing =====
BUILD DCs
     "boc.com/partnernet" in variant "default"
          Build failed! Unknown error
Change request state from PROCESSING to FAILED
ERROR! The following problem(s) occurred during request processing:
ERROR! The following error occurred during request processing:build controller process has terminated. cannot proceed with build
build controller process has terminated. cannot proceed with build
REQUEST PROCESSING finished at 2007-12-19 12:16:27.917 GMT and took 16 s 671 ms
Regards

Hi Sumit,
thanks for the quick reply. I get only these lines when i execute webservice.
<b>500   Internal Server Error
Application error occurred during request processing
     Details:   com.sap.engine.services.webservices.wsnavigator.WSNavigatorException: null
     Exception id: [0016355ABDF800580000016F00002C7800043D23C1985713]</b>
If required i can send my code...
thanks,
sudhir.

A Database error occured The database error text (CS) "Error on BindColwis

Hi All
msql analysis services Cube is source and based on this cubes universe is bult and when trying to referesh the reports in webi its giving error as
When I m refereshing the reports, Im getting the problem at refreshing time as
" A Database error occured The database error text (CS) "Error on BindCol wis (10901) msg its displaying.
Thanks in advance
Raj

Hi,
Just change your database connection from OLEDB to ODBC and you should be all set.
Good Luck.

Database error. The database error is: (CS) WIS 10901

Hi guys
i am using SAP BusinessObjects Edge BI 3.1 and created one report using webi, saved and exported to CMS when i opened it in Infoview it works fine but when i refresh it then i am getting below mentioned error:-
Refreshing a document in Web Intelligence Rich Client generates the following error message:
the database error text is (CS) " unexpected behaviour". (WIS 10901)
i am able to see the sql which is getting generated....
another problem i am getting if i am creating report using new web intelligence document and using efashion universe then report is showing blank with different colours....
Please help me to solve this problem..
thanks & Regards
Edited by: sap_@2011 on Aug 26, 2010 5:34 PM

Hello,
Have you checked your Universe connection to the database?
Did you create the report in Rich client on your machine and then export it? ODBC connections may be different. They need to be the same.
I am not sure what you mean regarding blank with different colors. Can you explain this a little better?
Thanks

"Developer Error. The following errors were found in your file:

I reinstalled my OS and I am trying to install ?LabVIEW properly for the past two days and whenever I run the setup I am getting this error
""Developer Error. The following errors were found in your file:
1. Specified file not found: [Utilities] UpgradeManagerPostProcessor = Bin\niPie.exe
Correct the ini file and try again.""
Mathan Suggested me this thread .
In that thread Brain.T had given a zip file i put it in my bin folder and I am now able to install LabVIEW.But I am not able to install device drivers,vision,vision assistant.Help Please

So you are intentionally creating duplicate posts. You know as well as I do the difficulty in following threads when people post in several different places the same question, and not knowing which one to follow and respond to. In your case you posted the same question in 3 places.

Widget Browser "There was an error downloading the widget, error 2032"

Hello,
I ve a problem with the Adobe Widget Browser! Months ago it works fine and I ve installed some widgets without any trouble, but now I´ve this error: "There was an error downloading the widget, error 2032" already in the widget preview!
I reinstalled the Widget Browser and Adobe Air - without any effect! Has anyone a sollution to fix the problem?
Thank you very much,
best wishes,
Thorben

http://forums.adobe.com/message/2861199?tstart=0
http://forums.adobe.com/thread/861530
http://forums.adobe.com/thread/892960
http://forums.adobe.com/thread/801092
http://forums.adobe.com/thread/869800?decorator=print&displayFullThread=true
Has noone an idea how to fix it?

Error 58 The specified server cannot perform the requested operation

Hello,
I will try to explain the situation as brief as possible. Next to our current existing MDT environment (MDT2010 on Windows 2008 R2) we are no building a new system (MDT2013 on WIndows 2012 R2). We have multiple sites and the MDT deployment share is setup
in DFRS share so every site is getting the same deployment information and replication is done automatically. This has been working firn for 3 years with the old system and also with the new environment it was working fine in our own subnet. But when after
i have setup the remote MDT and WDS servers it is not working in these remote sites. The images are loading fine but for some reason the win PE is not connecting to the shares on the windows 2012 server in our site. When i manuualy connect from a remote win
PE to our server i always get the error: system error 58 has occured. The specified server cannot perform the requested operation.
I have been doing some troubleshooting and it seems i only got this issue when i connect from win PE 5.0 to a windows 2012 R2 server in a remote subnet.
When i use win PE 5.0 and connect to a windows 2012 R2 share in the same subnet it connects fine.
When i use win PE 5.0 and connect to a windows 2008 R2 share in a remote subnet it connects fine
When i use an older win PE and i connect to a windows 2012 R2 share in a remote subnet it connects fine
When i use win PE 5.0 and connect to a windows 2012 R2 share in a remote subnet it does NOT connect and gives the above error
The problem is that this problem also does not occure in Windows 7, after the machine was build by MDT and get into the OS i can connect without a problem to the windows 2012 R2 shares.
Checking the event viewer on the 2012 R2 server that is hosting the shares i see that the following events are created:
4624: An account was successfully logged on.
Subject:
Security ID:
NULL SID
Account Name:
Account Domain:
Logon ID:
0x0
Logon Type: 3
Impersonation Level: Impersonation
New Logon:
Security ID:
domain\username
Account Name:
username
Account Domain: domain
Logon ID:
0x1F1FC0
Logon GUID:
{8e360e91-001b-c726-84a6-e7281a4bcac8}
Process Information:
Process ID:
0x0
Process Name:
Network Information:
Workstation Name:
Source Network Address:
x.x.x.x
Source Port:
60077
Detailed Authentication Information:
Logon Process:
Kerberos
Authentication Package:
Kerberos
Transited Services:
Package Name (NTLM only):
Key Length:
0
This event is generated when a logon session is created. It is generated on the computer that was accessed.
The subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The logon type field indicates the kind of logon that occurred. The most common types are 2 (interactive) and 3 (network).
The New Logon fields indicate the account for whom the new logon was created, i.e. the account that was logged on.
The network fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The impersonation level field indicates the extent to which a process in the logon session can impersonate.
The authentication information fields provide detailed information about this specific logon request.
- Logon GUID is a unique identifier that can be used to correlate this event with a KDC event.
- Transited services indicate which intermediate services have participated in this logon request.
- Package name indicates which sub-protocol was used among the NTLM protocols.
- Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
5140:
A network share object was accessed.
Subject:
Security ID:
domain\username
Account Name:
username
Account Domain: domain
Logon ID:
0x1F1FC0
Network Information:
Object Type:
File
Source Address:
x.x.x.x
Source Port:
60077
Share Information:
Share Name:
\\*\Captures
Share Path:
\??\D:\Captures
Access Request Information:
Access Mask:
0x1
Accesses:
ReadData (or ListDirectory)
4634:
An account was logged off.
Subject:
Security ID:
domain\username
Account Name:
username
Account Domain: domain
Logon ID:
0x1F1FC0
Logon Type: 3
This event is generated when a logon session is destroyed. It may be positively correlated with a logon event using the Logon ID value. Logon IDs are only unique between reboots on the same computer.
Anyone an idea why this is happening?

Hi,
We can refer to the following blog for MDT troubleshooting:
http://blogs.technet.com/b/askcore/archive/2012/05/08/mdt-2010-amp-2012-my-deployment-failed-what-and-where-are-logs-i-should-review.aspx
Best Regards,
Vincent Wu
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

When using Java Wizard with Firefox 3.6.23 on a Mac OS X 10.6.8 it keep getting an error message: "The Java Wizard cannot run. Please configure your browser to allow Java applets to access the filesystem." Have NO idea how to fix this problem.

When trying to upload files I received the following error: "The Java Wizard cannot run. Please configure your browser to allow Java applets to access the filesystem."

If the problem is with a site that is hosted using MOVEit DMZ by Ipswitch, please notify the site owner of the issue and ask them to apply the patch that is available on the support site to resolve the issue.
This is a better resolution than downgrading your version of Java that was updated due to security issues.

Error During the smartform Activation

Dear Gurus,
During the activation of the Smartform I got the following error in Global Definition Node:
Statement Concluding with "..TYPE" ended unexpectdly.
Kindly let me know how to resolve this.
Wishes,
Abhishek

Hi Abhishek,
I think in the smart form in form interface in the import/export/tables associated type is missing.
Thanks,
Leela Krishna

Error message 'the selected file cannot be linked because it has 2 audio channels and the clip was created with 1 audio channel'

Can anyone help with the error message I'm getting 'the selected file cannot be linked because it has 2 audio channels and the clip was created with 1 audio channel'. I had to move the footage to another folder and now am unable to link it - just getting this error message instead.... Has anyone had to deal with this before?
Thank you!

Relink to the correct media.

Error in the Smartforms 'ERROR CANNOT BE CLASSIFIED'

Similar Messages

Maybe you are looking for