Error in the source systen with app log in source system
Hi experts
I am running a full load for 0HR_PT_2(Actual Personnel Times ).this load is loading the data and says no errors occurred and write an app log in source sytem saying
Extraction date for personnel number 00000000 set to 20081231.
I have tried to select the data selection of personnel no from
00000001 to 99999999.
but it still gives me the same warning.
please help me in solving.
thanking you
satish
Hi Satish,
Were you able to fix the application log in source system issue ? I am also facing the same problem for 0HR_PT_2 .
plz let me know.
Points will be awarded .
Similar Messages
-
Conversion factor error in the source system
Hi All,
I got conversion factor error in the source system, when i tried to load maste data.
can anybody help me in. It is urgent please...
Thanks in advance
NarendraHi...Post the error
Regards -
Error in the Source system while data loding through Process Chain
Hi,
I am facing issue while data loading for certain extractors through Process chain. Load of 0BPM_WIHEAD, 0BP_LOGHIST, OBPM_OBJREL, 0BPM_DEADLINES(there are 2-3 more extractors) is getting failed daily with message Error occurred in the source system and if we repeat the same it is getting executed successfully.
Regards,
JavedHi..
It means that the extraction job is failing in the source system..
Please check the Job log in the source system --> Copy the request nimber --> In the source system go to SM37 --> Give * then the request number......execute --> Check the Job log..
Look there may be multiple reasons behind this....
1) Connection problem : Go to SM59 and test the connection, If you don't have the access in SM59...then go to RSA1 --> Source Systems --> Right click --> Connection Parameters --> Connection Test
2) Or may be work processes are not available and due to which jobs are failing due to time out...
In both the cases you can check with the Basis Team if they can suggest something....or you can change the process chain scheduling time if possible, and schedule it in such a time when less no of jobs are running..
Regards,
Debjani.. -
Inbound idoc error in the source system
HI,experts
I manually configurate the idoc type ,message type ,etc between the BW system and r/3 source system when the automatic program encouters errors. And the communication between BW and source sysyem seems ok since the source system is activated successfully in BW side.
But when I check the inbound the idoc in source system after i triggerred a full load for the datasource 0FI_GL_4,an error occurs in the inbound process in R/3. There is no control information in the idoc which message type is RSRQST.
how can i figure this issue out ?could anyone help me ?HI,ALL
Thanks for your replies and documents.
Now I find the problems lies in the error connection between R/3 and BW. IF the autoconfiguration is completelly correct , the table RSBASIDOC in both system should be added one record.But now when the source system is activated successfully ,the table in R/3 side has no entry while the BW side has one entry .juding from this ,there is no BW system connected to the R/3 ,which is proved when I fill the setup table for LO datasource an error message shows that there's no BW system is connected to the OLTP system.
How can i figure this issue out ?If I want to do an automatic configuration ,what shall I do ? -
Error in the Source System...
Hi
<b>RSA1-->Source System >(Context Menu)> Check</b>
<b>Error:</b>
<b>The BW IDoc type ZSBA011 is not the same as the source system
IDoc type ZSBD012
</b>
ThanksHi BW KING,
This error due to RFC connect is not there between BW to Sorce system.
OR else There is RFC connection mis match.
You have to ask the BASIS People to correct the RFc connection between BW to your source system.
Other wise data will not get it will show RFC connection Failed.
Thanks,
kiran. -
BE3.5 : Error from the source system while activating the transfer rule
When I was trying to activate the transfer rule for one info object( charateristic with master data) , I got the following error in [[ ]]
Error when creating transfer structure /BIC/CCPIZGR00CC_ATTR in source system CI2220
Diagnosis
An error occurred when creating transfer structure /BIC/CCPIZGR00CC_ATTR as an IDoc segment in source system CI2220 .
System response
The action was terminated. No data was changed.
Procedure
Use the generation log in source system CI2220 to identify the error, and remove the cause.
CI2220 is the backend R/3 system, I had no issue in replicating the data source etc. this error occurred while trying to activate the transfer rule after assigning the info source to the replicated datasource in BW.
Can anybody tell me how to view( what transaction etc) the generation log to understand the issue?
Thanks in advance
ArunabhaHi Arunabha,
I would confrim that there is no issue with the datasource in your r/3 system. Can you run the datasource on your r/3 system with no errors using RSA3?
If the datasource is ok, then I would check out the error message number in OSS or SDN. I have seen this error before, I just cannot recall what the fix was.
Cheers! -
Error in the source system for fiscal year variant K4 Period 00
We are experiencing the following issue when loading data from module Flexible real estate RE-FX CASHFLOW CUBE OREFX_C06 Error in source system Fiscal year variant K4 is not defined for the period 00.
Hi,
You need to check in your source whether you have maintained Fiscal Yr Variant or not? Talk to you Functional person before you do the BI Extraction.
In Table T009B
You can check Fields
MANDAT - client
PERIV - Fiscal Year Variant
BDATJ - Posting date YYYY
BUMON - Posting date calendar month
Check Table T009B and see if you fiscal variant is maintained for all periods of Years (as per error its not). maintain the same in Source system and transfer Global settings in BW to copy the same into BW system.
@AK -
Trfc error in the source system
Hi,
I got an error as trfc error in the souirce system,How to proceed regarding this.How to check RFC connections.What are the transaction codes for trfc and to check rfc connections.. please let me know.
Many ThanksHi,
We are having some problems.
While loading the data in BI 7.0 from R/3 ECC 6.0, sometimes (not always) IDOCs are getting stuck before coming to BW System.
The job always finishes successfully from R/3 side but before coming to BI, IDOCs are getting stuck and we manually have to push them into BI System.
How to avoid the situation of IDOCs getting stuck and what could be the possible reasons.
Please guide.
Thanking You,
Tarun Brijwani. -
Processing error occured in the source system
Hi Experts,
I am extracting payroll data from ECC 5.0 to BW side, after the extraction I'm getting warning message proceesing error in the source system.
In the source system apllication log the following warning message displyed.
<u>No assignment of payroll data to BW month for country grouping 99</u>.
I checked at BW side the data was available in the PSA and Data Target, but the status was in YELLOW for long.
If any one come accross this , please provide good inputs....
Thanks & Regards
KumarI have the same problem.
The following text is ment to help me.
Havent solved it yet, but explects to find the activity 'Assigning the Payroll Data to BW Month' in spro.
best regards
Ingrid
Message no. HR_BW_PY99026 Assigning the Payroll Data to BW Month.
Diagnosis
No assignment is specified for country grouping 20 in the Customizing activity "Assigning the Payroll Data to BW Month".
System Response
The SAP standard "End Date of For-Period" is used for this country grouping.
Procedure
Enter an assignment for the country grouping in Customizing the DataSource 0HR_PY_1.
Choose: R/3 Customizing Implementation Guide -> Integration with Other SAP Components -> Business Information Warehouse -> Settings for Application-Specific DataSources -> Human Resources -> Assigning Payroll Data to a BW Month. -
Restoring the source system connection in BW
Hi all,
Ive been trying to upload data for 2 of my infocubes, and the extractions are bouncing. The message in R/3 is told me to check the connection. The RFC are fine. But when I tried to restore the source system connection (RSA1 in BW), it sent me the following error messages:
1.- Basic type ZS 118 does not exist.
2.- The following error in the source system:
3.- Incorrect IDoc type ZSAB023 in the ALE definition of the source system.
The description in each error is:
Error #1:
Diagnosis
IDoc type ZS 118 could not be found.
System response
Procedure
Please enter an IDoc type that exists.
Error #3:
Diagnosis
Incorrect IDoc type ZSAB023 in the ALE definition of the source system.
System response
Error when sending data to BW.
Procedure
Enter IDoc type ZS 118 .
They told me this IDocs are created automatically by the connection. Is that true?
How can I fix this, so that I can restore my connection and do the data extraction?
Thanks a lot
Regards,
VicHi Victor Tostado
1.- Basic type ZS 118 does not exist.
Type Transaction WE30. Check iDoc types Obj. Name : RSSEND -> press F7
a.) Enter 'RSSEND' in the Obj. Name field. You will see an entry similar to the one below:
RSSEND Data transfer from the source system (template)
[-] E1RSSH Data transfer IDoc: Header information
[+] E1RSHIE Data transfer Idoc: Hierarchy header information
E1RSTXT Data transfer IDoc: Texts
b.) Enter RSREQUST in the Obj. Name field. You will see an entry similar to the one below:
RSREQUST Data request to the source system
[-] E1RSRH Data request IDoc: Header segment
[+] E1RSRHI Data request IDoc: Hierarchy
[+] E1RSRTX Data request IDoc: Texts
[+] E1RSRMD Data request IDoc: Master data
[+] E1RSRIS Data request IDoc: InfoSource
c.) Enter RSINFO in the Obj. Name field. You will see an entry similar to the one below:
RSINFO Info IDoc
[-] E1RSHIN InfoIDoc: Status segment
E1RSPIN InfoIDoc: Data packet segment
E1RSEIN InfoIDoc: Error segment
d.) If any of the above do not exist, contact your BASIS Team.
2.- The following error in the source system:
Type Transaction SM59. Maintain RFC destinations
a.) Open the RFC Destinations. b.) Find your Source System and double click on it. c.) Technical setting should contain information regarding your source system d.) Logon Information should contain source system client and name & password for you remote logon.
3.- Incorrect IDoc type ZSAB023 in the ALE definition of the source system
Type Transaction WE21. iDoc Processing Ports.
receivers port is not available go to WE21 -> create port
a.) Select 'Ports' and then 'Transactional RFC'. b.) Click on the Port # for you source system. c.) Verify description & SAP R/3 versiond. RFC Destination should be one created in SM59. If non-existent then create one.
I) Type Transaction SE16. Data browser (for R/3 -> BW Connections)
Enter RSBASIDOC Print out copy of all entries in table.
II) Type Transaction SM30. Msg Types & Assignment to iDocs
Enter 'EDIMSG' in the Table/View field. Click on the 'Enter Conditions' option for Restrict Data Range. Click 'Maintain'. Select Message Type. Then enter 'RSSEND' in "From' field. Verify that the Basic Type matches what is in your RSBASIDOC table for each of your connections. If any are missing any entries you must create them as follows: Create another session and type Transaction WE30. Enter IDoc Type (ZSBAXXX) in Obj. Name field (Suggestion: Start new type with 'ZS' + Transfer Structure Prefix + (3)#'s) Select Create. Select "Create from Copy'. Enter 'RSSEND" in 'Copy From' field Enter Description (i.e. IDoc Type for BW Development) Execute (Green Check). Repeat for other missing entries.
Regards
Sangram Sutar -
Hi Experts,
I have a load in bw which extracts the data from R/3. In the IP selection i have OLAP variable set to 0calmonth and the selection is one month. The loads gets failed with the page allocation error in the source system. I tried reducing the packet size with different option. Still i couldn't complete the load.
If any one come across with this kind of situation please help to resolve this issue.
Thanks
DeepthiHi ,
Below are the parameters and values for them which are recommended by SAP.There is a SAP Note available for this.ASk yr basis consultant to check the notes.
ES/TABLE SHM_SEGS
ES/SHM_SEG_SIZE 2048
em/global_area_MB 250
abap/heap_area_total 4000000000
abap/heap_area_dia 2000000000
abap/heap_area_nondia 2000000000
ES/SHM_PROC_SEG_COUNT 16
ES/SHM_MAX_PRIV_SEGS 15
ES/SHM_USER_COUNT 2048
ES/SHM_SEG_COUNT 2048
Need to do a system bounce for the parameter change to take effect.
Regards
Balaji -
An error occurred in the source system, DBIF_RSQL_SQL_ERROR
Dear All,
last 4 days my process chain stop, now todya i activate the process chain. i found a error In 0FI_AR-4.
the error i found
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
i already check in RSA3 , Once execute 0FI_AR_4 I Found a dump
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure
"BWFIR_READ_BSID_CPUDT_DATA" "(FUNCTION)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
How to correct the error
The exception must either be prevented, caught within the procedure
"BWFIR_READ_BSID_CPUDT_DATA"
"(FUNCTION)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
Database error text........: "ORA-25153: Temporary Tablespace is Empty"
Internal call code.........: "[RSQL/FTCH/BKPF_BSID ]"
Please check the entries in the system log (Transaction SM21).
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"DBIF_RSQL_SQL_ERROR" CX_SY_OPEN_SQL_DBC
"SAPLBWFIR" or "LBWFIRU10"
"BWFIR_READ_BSID_CPUDT_DATA"
please any one help on this issue
Advance in thanks
Regards
PriyaHi,
Can you please try adding the datafile to the PSAPTEMP tablespace in the source system, and try to start the process chain again. If required you have to contact the Basis Administration. Also please find the system logs and dumps in the source system at the point of time.
Can you please let me know if it got fixed.
Thanks & Regards,
VR -
Application log in the source system.
Hi,
I am trying to do the initialisation with data selection from R3 Source system into BW. Data was loaded but still the status showing Yellow and its giving the following messages.
Information was stored in the source system.
Diagnosis
The system has written an <b>application log</b> in the source system.
System response
No errors occurred.
Procedure
Check the log.
Procedure for System Administration
Can any body help me how to look the Application Log & the solution for the above problem.
Note : My PSA have all green records and it loaded 1176080 From 1176080 Records.
Points will be awarded.
Thanks,
Abhi.Hi Abhi,
If BW tells you that no errors occurred it makes no sense to look into the application log. What helps however is to check if processes are still active for your load, e.g. ODS activation. You can check using tcode SM50 (in R/3 for e.g. user ALEREMOTE, in BW e.g. user BWREMOTE...can differ in your system).
Also check the Details tab in the monitor to see if all is green there (expand all nodes). Something might still be yellow so that's the step which is 'hanging'.
Hope it helps...
Grtx
Marco -
Why can't two different users use Itunes on the same computer with different log ins
Why can't two different users use Itunes on the same computer with different log ins
Pmorgan5672 wrote:
Why can't two different users use Itunes on the same computer with different log ins
They can, but not at the same time.
If one user left iTunes running, and another user tries to use iTunes from a different Windows user ID, that second user will get an error message. If they really want to use iTunes, they either have to beg the first user to log in and close iTunes, or else they have to restart the computer.
If you are asking the technical reason why, it is something about context switching. -
Error message from the source system
Hi,
I'm trying to load 0SD_O03 & 0SD_C03 using fullupload.
I have data in source system which I checked in RSA3.
I deleted the init request from the Infopackage.
Diagnosis
An error occurred in the source system.
System response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Please help!
Thanks,
VishI see a shortdump in BW system with runtime error
MESSAGE_TYPE_X
The current application program detected a situation which
should not occur. Therefore, a termination with a short du
triggered on purpose by the key word MESSAGE (type X).
Hi A.H.P,
It didn't happen to other extractions. I just started with this one. I set up the table in SAP R/3 system and when I tried to do the initial full load in SAP BW, it comes up with the above error.
Thanks,
Vish
Maybe you are looking for
-
When I am trying to down load the ALV report to EXCEL. The report fields are not coming in the same order as they are in the report. Please advice. <b><REMOVED BY MODERATOR></b> Thank you. Gouri. Message was edited by: Alvaro Tejada Galindo
-
Selection-Block By default grey
Hi, How to make the block in the selection-screen by default as greyed.
-
Hello everyone. On my iPod touch I am experiencing large amounts of lag when doing everything. This has started after I updated to ios 5 and is very annoying. Has anyone found a fix yet?
-
From which tables the data is coming in to transaction fields, how to find?
Hi abapers, I am new to abap, I have some data in one transaction. I want to know that one particular record in a field from which table the data is coming, how do i know? How to find that for the transaction is haveing header and item tables? How to
-
Hi Everybody, I am Hemant Shukla working as Sr.Oracle Consultant in Singapore.I am facing a problem with oracle Double -Byte Conversion.My Software is in Oracle-9i and D2K-6i.My client requirement is to convert the whole software in Chinese language