Error in the specifications for area 01 in ch.of dep

Hi,
In our business scenario there are two different chart of depreciation which are Spain and Morocco. Spain has currency EUR and Morocco has MAD. Spain asset CWIP process has done successfully but Morocco has the problem found. While doing actual settlement through KO88 for CWIP asset settlment, one error is being occured as "There is an error in the specifications for area 01 in ch.of dep.
Message no. AC385
Diagnosis
You specified that depreciation area 01 should take over values or depreciation terms from itself. This specification is incorrect.
Procedure
Correct the specifications for area 01.
Best Regards,
Samrat Roy

It seems you have kept 01 as TTr in OABD for depreciation area 01
If the 01 is real depreciation area, do as below
Go to OABD
Depreciation area - 01
TTr should be 00 (You should not keep anything other than 00 here)
Thanks
Edited by: nkonnipati on Mar 2, 2012 5:59 AM
Edited by: nkonnipati on Mar 2, 2012 5:59 AM

Similar Messages

TS1718 I tried to update, did not work, unintstalled did not work. Now when I try to install i get error message "The feature you are trying to use is on a network resource tha is unabailable. Looking for itunes64.msi path.

I tried to update, did not work, unintstalled did not work. Now when I try to install i get error message "The feature you are trying to use is on a network resource tha is unabailable. Looking for itunes64.msi path.

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

"There was an error opening the database for the library "~/Pictures/Apert"

Hey everyone,
There's already another discussion thread about this at the link below, but the problem was never actually resolved. http://discussions.apple.com/thread.jspa?threadID=2343014&tstart=0&messageID=116 67261#11667261
So I stumbled across this problem where Aperture 3 will display the following error when opening the image library.
There was an error opening the database for the library “~[path]/Aperture Library.aplibrary”.
One user suggested navigating to the actual library, and ⌘⌥-clicking the library to open it with the Aperture Library First Aid dialog. This however, did not work for me. I still received the error messages upon ⌘⌥-clicking the library.
Here's a little hack I discovered for those of you still struggling. It doesn't fix the problem (leaves quite a large dent remaining actually), but hopefully someone can cultivate what little I discovered.
⌥-click Aperture (not the library)
You should get to the library selection dialog box. Create a new library (bottom right corner) and remember the location of the new library. Put a few random pictures in the new one.
Close Aperture
⌃-click both the old and new libraries and "Show Package Contents."
Open the folder "Database" in both libraries.
Cross check the folders to see if the old library is missing files that are in the new library. If your old library is missing some files (mine was), drag the missing files from the new library to the old one.
Close both folders.
⌘⌥-click the old library.
NOW, I got the Aperture Library First Aid dialog.
Rebuild the library (3rd option)
Wait a while.
Aperture should open up with a folder named "Recovered Folder." Within this folder will be a SINGLE project named "Recovered Project" with ALL the images from your old library. There may be a few albums there too, but mine were all empty so it didn't matter in my case. To my knowledge, I lost all the adjustments I performed too.
This is as far as I got. I have much of my library backed up, so I only needed to copy the most recent photos into the backup. I am NOT reorganizing and re-editing pictures in this one!
As Aperture is a photo-organizing and photo-editing software, I understand that this by no means fixes the problem, since you lose all organization and editing. But it enables one to at least view the images lost. Hopefully a more knowledgable hacker else can figure out how to fix this completely. Unfortunately, I simply don't have the time to continue messing with this.
Good luck to anyone else having issues! I understand the frustration you must be facing, its freaky having years worth of images simply disappear! After this incident, I'm definitely going to configure Time Machine to perform more frequent backups, since my latest backup was already a couple weeks old.

Hey All,
To my horror I have a similar problem and your solution didn't seem to help. To be specific, I get the error:
"There was an error opening the database for the library “~/Pictures/Aperture Library_2.aplibrary" Everytime I try to run Aperture. This happened because my Apple computer shut off completely (due to bad battery) while importing photos from a memory card.
I've tried "option + command" while clicking the aperture application and that gave me the same error message without any other option except to quit the program. I tried "option + command" and clicked the library package but that didn't work either. I tried creating a new aperture library, opening it which I did successfully, and then switching to my main one but that didn't work.
Does anyone know away to get it to work again and have the edits still there?
I'm a professional photographer and have thousands of photos or so in the library so this is distressing. The master files for the photos are located on an external hard drive, but I'm not sure how to access them in aperture. Are all the edits on the photographs are in the external hard drive or the aperture library. Is there any other way to resolve this issue without losing the edits?
Does apple have a support number I can call? Any help would be greatly appreciated!!

Error in the instructions for performing a silent install

There's an error in the instructions for performing a silent install of Photoshop Elements:
http://helpx.adobe.com/photoshop-elements/kb/silent-install-instructions-photoshop-element s-1.html
In step 9, the instructions say to use the following command line:
start /wait "path to Setup.exe" /UL%LangCode% /V“SERIALNUMBER=%AOO volume license serial number%"
The correct command line, however, is this:
start /wait "path to Setup.exe" /UL%LangCode% /V"SERIALNUMBER=%AOO volume license serial number%"
See the difference? Look closely at the character after the /V. In the instructions on the website, they put in a "curly quote" character. This obviously needs to be a straight quote.
Interestingly enough, the erroneous command line from the web site will actually work just fine as posted if all you are passing in the /V is the serial number. If, however, you wanted to add a "NODESKTOPICON=1" to disable the creation of a desktop shortcut, for example:
start /wait "path to Setup.exe" /UL%LangCode% /V“SERIALNUMBER=%AOO volume license serial number% NODESKTOPICON=1"
then it fails to run silently.
I post this in the hopes that Adobe will fix the typo in their instructions and save other admins the hours of grief I've been put through today trying to get this working.

Check the response file where you define the SGA memory size for the new database.
You can also choose not to create the database at the installation and do it afterwards, making a specific response file for it. (I'd recommend specially this option. like that you can separate possible installation errors with the ones on the DB creation process).
Good luck.
Regards,
Enric Moya

I have three aperture libraries. But just recently two of them (old from 2011) will not open. I get the following error: There was an error opening the database for the library "~/Pictures/Family IIi.aplibrary". Please help, thanks

I have three aperture libraries. But just recently two of them (old from 2011) will not open. I get the following error: There was an error opening the database for the library “~/Pictures/Family IIi.aplibrary”. Please help, thanks

Are all three libraries under your account or are they in different accounts? Any other errros on the system?
Start by doing the permission repair and library repair steps in Aperture 3: Troubleshooting Basics

HT4623 I tried to update my ipad air to IOS 7.1 but it shows error that "The software for the iphone was corrupted during download" How can I fix this problem ?

I tried to update my ipad air from IOS 7.0.4 to 7.1 on iTunes. I clicked download and update, it started to download normally but when download finished iTunes shows error that "The software for the iphone was corrupted during download".
How can I fix this error ?

I had the same problem. In the end I downloaded it manually. Here's the steps assuming you are on a Mac and have an iPad Air (Wifi). If not you can find other restore links here.
In the terminal (it kept failing to download in Safari):
curl http://appldnld.apple.com/iOS7.1/031-4521.20140310.D2Ydl/iPad4,1_7.1_11D167_Rest ore.ipsw >>~/Desktop/iPad4,1_7.1_11D167_Restore.ipsw
Once the file has downloaded, move it to ~/Library/iTunes/iPad Software Updates/
Quit and relaunch iTunes.
Should now work for you.

Error opening the database for the library "~/Pictures/Aperture Trial Library.aplibrary" error message

When starting up Aperature 3 I get the following Error Message :
"There was an error opening the database for the library “~/Pictures/Aperture Trial Library.aplibrary”.
I can't di a thing except Quit. I have restored from Time Machine and reloaded the Software from Disk. Still get the same message. Any suggestions Are appreciated.
Jim

Hello Jim,
I assume you trial Aperture Library is in your "Pictures" folder? Try to rename it to something like "OldApertureTrialLibrary.aplibrary", to force Aperture to create a new Application Library.
To rename the old Trial Library, select it in the Finder and enter Command(⌘)-I (short for File-> Get Info). Click on the file name text field and enter a new name.
Possibly you get this error message message, because there is some permissions problem. If you are not allowed to rename the file, click on the padlock in the lower right corner, authentificate as admin and give yourself read/write access to the trial library (in the "Sharing & Permissions" brick of the "Get Info" panel).
Post back, if your "ApertureTrialLibrary.aplibrary" contains valuable images that you would like to save or if this does not work and you need further advice.
Regards
Léonie

Error "Post the HUs for goods receipt so that they can be transfer "

Hi Gurus,
I am facing a problem while doing PGR the inbound delivery,
I am moving stock from one SLOC (AY02- HU Managed) to Another SLOC
(AA99-
Non HU). Inbound delivery is created .
I did automatic packing and packed the HU generated and saved the
inbound delivery. While doing PGR I am getting error "Post the HUs for
goods receipt so that they can be transfer posted Message no.
HUFUNCTIONS254". Kindly Assist
Steps for Reconstruction
1) MB1B post with 311 movement type.
2) delivery gets created.
3) pack the HU's automatically and HU's were generated, save the inbound.
4) Do PGR .
Regards
Gopi

Hello,
There is a "concept problem". You are not doing a reception, you are posting an issue. After running MB1B system should create an Outbound delivery.
In a HU-managed storage location you should use existing HU in order to pack the delivery. Instead of generate new HUs in the OD, try to pack existing ones.
Regards

There was an error opening the database for the library "~/Pictures/Apertur

There was an error opening the database for the library “~/Pictures/Aperture Library.aplibrary”.
What's up with this? Aperture showed this error a couple times before quitting when I tried to open it.

I got the same error. Normally I would perform a Repair Database command by holding down Option-Command while launching Aperture, but that just gave me the same error without any options to repair the database.
Instead, I had to follow these instructions in the Aperture user manual. The key is to locate the Aperture library file on your hard drive and then hold Option-Command while double-clicking the Aperture library file.
Choose the REPAIR DATABASE option.
-- excerpt from user manual --
To repair or rebuild your Aperture library
Close Aperture, if it’s open.
Locate the Aperture library you want to fix, then hold down the Command and Option keys while double-clicking the Aperture library.
The Aperture Library First Aid dialog appears.
In the Aperture Library First Aid dialog, do one of the following:
To repair the permissions of the files within your Aperture library: Select Repairing Permissions.
This option should be used when Aperture can’t access some of the image files within the database or Aperture is unable to open the library itself. The Repairing Permissions option reviews each file in your Aperture library and sets the read and write access of each file where appropriate, allowing Aperture to access the files again.
Note: This option does not relocate referenced images whose master image files are offline. For more information about reconnecting offline images, see Reconnecting Missing or Offline Referenced Images.
To repair your Aperture library file: Select Repair Database.
This is the first option you should use if you believe there is something wrong with the Aperture library other than image file access issues.
To rebuild your database from scratch: Click Rebuild Database.
This option should be used as your last measure as it can be time-consuming for large image libraries. If you have tried repairing your database, and the issues you are encountering with your Aperture library still persist, you should use the Rebuild Database option. Aperture examines the library’s entire database and rebuilds each component until it reconstitutes your original Aperture library.
Depending on your selection, click Repair or Rebuild.
Aperture either fixes file permissions within the library or repairs or rebuilds the library, and then opens the application workspace.

Many of the times my Iphone 3G 16GB shows "No Service" in the specific network area, but if the same sim card is used with other mobile handset in the same network area its shows full network, Is this a Iphone 3G Handset problem or is network

Many of the times my Iphone 3G 16GB shows "No Service" in the specific network area, but if the same sim card is used with other mobile handset in the same network area its shows full network, Is this a Iphone 3G Handset problem or is it a problem with network service provider for iphone in india with Airtel.

Try to reset Network setting thru (Setting/General/Reset/Reset Network Setting - after clicking on it the phone will ask to reboot)
According to my R&D I have experienced that one must reset the network each time when we r at home or in office or other places, the phone after resetting the network setting acquires the area specific network setting n works well, try it & if any other solution do let me known
Calling up customer care did not help me, they do keep us in a loop with the same old answeres that “Our technical team is working on it & WILL GET BACK TO u” leaving us with no solution at the end
Try what I suggest think to will help u

ATL COM server error (0x800706C6 The array bounds are invalid) in Windows 2012 server

Hi,
We have a ATL COM server application which was developed using Visual Studio 6.0. This was ported to Visual Studio 2003 later.
The application was running without any problems on Windows 2008 server. When we installed it on Windows 2012 server the services would not start at all. On contacting MS support we can to know that the code needs to be built using Visual Studio 2013. The
same was done wherein we ported the application to be built using Visual Studio 2013.
The application is still failing. On debugging I could trace it to CoResumeClassObjects() call. This call returns error "0x800706C6 The
array bounds are invalid.". The same works perfectly fine on windows 2008.
Does anyone know what has changed between 2008 server and 2012 R2 server with respect to COM implementation.

Hi Amit,
Please try call CoResumeClassObjects to register classes in ServiceMain function.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Relinking Error. The executables for Oracle8 Entrprise (RDBMS) were not made

I am trying to install Oracle8051EE_Intel.tgz.
Relinking Error. The executables for Oracle8 Entrprise (RDBMS) were not made successfully.
The error in the install.log file are:
(( OIERR-SYSTEM: make -f ins_rdbms.mk ORACLE_HOME=/var/database/ora001/app/oracle/product/8.0.5 install ))
When running the command:
make -f ins_rdbms.mk ORACLE_HOME=/var/database/ora001/app/oracle/product/8.0.5 install
from the /CD-ROM/rdbms/lib directory, I get the errors:
/var/database/ora001/app/oracle/product/8.0.5/lib//libplsf.a(spssimb.o): In function `pss_gets':
spssimb.o(.text+0x4ef): the `gets' function is dangerous and should not be used.
/var/database/ora001/app/oracle/product/8.0.5/lib//libgeneric.a(skgfr.o): In function `skgfrcre':
skgfr.o(.text+0x4de): the `llseek' function may be dangerous; use `lseek64' instead.
/var/database/ora001/app/oracle/product/8.0.5/lib//libserver.a(hoco.o): In function `hoconsi':
hoco.o(.text+0x104d): undefined reference to `__strtoq_internal'
/var/database/ora001/app/oracle/product/8.0.5/lib//libserver.a(hoco.o): In function `hoconui':
hoco.o(.text+0x126a): undefined reference to `__strtouq_internal'
collect2: ld returned 1 exit status
make: *** [var/database/ora001/app/oracle/product/8.0.5/rdbms/lib/oracle] Error 1
How do I resolve this problem?

I don't know if it can help you, but I had to face something quite like that installing Oracle 8.1.7 on Aix 5L.
In fact, you don't need to have C compiler on the system to relink products. "ld" and "ar" commands are used to do it. But you need to have all the necessary libraries installed. So check if filesets bos.adt.lib and bos.adt.libm are installed and then try a "relink all" from an oracle's shell.

TS2518 Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library it says There was an error opening the database for the

Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library it says There was an error opening the database for the library. I have tried every thing. I updated the other libr but now it will not open the main to update. What do I do?

Try starting Aperture with the command and option keys held down. You'll get 3 options.
Try each, starting at the top, in order, checking after each to see if it fixes the issue.

HT1926 when i try to install update i get this error message the feature you are trying to use is on a network resource that is unavailable any ideas

every time i try to update itunes i get this error message The feature you are trying to use is on a network resource that is unavailable then asks me to find the folder containing the instalation package ITunes.msi

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

I am trying to download itunes 10.6 and keep getting this error message, "The feature you are trying to use is on a network resource that is unavailable to a folder containing installation package itunes64.msi". What do I need to do?

I am trying to download itunes 10.6 and keep getting the error message "The feature you are trying to use in on a network resource that is unavailable. Enter alternate path to a folder containing the installation package itunes67.msi". Where do I find this or how do I get it?

"The feature you are trying to use in on a network resource that is unavailable. Enter alternate path to a folder containing the installation package itunes64.msi".
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Error in the specifications for area 01 in ch.of dep

Similar Messages

Maybe you are looking for