Error in the submission form...

I created a page with contact form. Using Adobe Business Catalyst the form works perfectly, I get an email with the form data. But when hosted my site in another e-mail server I get with the form data comes all defragmented or encoded. How can I solve this?

Have you tried to contact with you host company if not then please contact them as if they fully support php mail.
Also try to change the email which is set to receive notification and then check.
Thanks,
Sanjit

Similar Messages

Error Generating the Task Form

While publishing a new SharePoint Designer 2010 List Workflow I get an Error:
SharePoint Designer encountered an error generating the task form. Server was unable to process request.--->Activation could not be completed because the InfoPath Forms Services support feature is not present.
I was able to publish SPD Workflows until a couple of days ago. Existing ones can be republished but not new ones.

Try running the following cmdlets.
Disable-SPFeature "IPFSSiteFeatures" - URL "Path"
Enable-SPFeature "IPFSSiteFeatures" -URL "Path"
These cmds will restart the Infopath Forms Services support features, which is responsible for supporting publishing Infopath Forms.
Hope this works for you.

Why some contact forms doesn't work on some websites? We don't receive the submission form with the information?

Why some contact forms doesn't work on some websites? We don't receive the submission form with the information?

Hi Aish
I wanted to check the following, but the URL is not found, you have another one?
thanks
Nicole
4. Visit http://my-site.com/scripts/form_check.php in a web browser and make sure you see all green checkmarks. If some items do not display green checkmarks that means that the hosting server is not configured correctly to allow the Form widgets to send email messages to the address you've specified.
Contact your web-hosting provider about the server configuration problem. Describe the items that are not marked as green in the form check page, so that they can help you set up the servers to use the correct settings.
Il giorno 9-set-2014, alle ore 16:11, Aishvarya Raj Rastogi <[email protected]> ha scritto:
Why some contact forms doesn't work on some websites? We don't receive the submission form with the information?
created by Aishvarya Raj Rastogi in Help with using Adobe Muse CC - View the full discussion
Hi Nicole,
What is the "From" email address in your form?
Also, have you checked the spam folder?
Please check the following posts as well :
https://forums.adobe.com/docs/DOC-3581
Re: PHP mail may be disabled or incorrectly configured on the web server.
Regards,
Aish
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6714281#6714281
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Help with using Adobe Muse CC by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Error during the adobe form activation

hi all,
when am i activate the adobe form layout (Zlayout) , the following error message occured:
Error during activation
Message no. EU837
but iam not found any syntax error in layout development.
please help in this it very urgent....
Thanks,
Ramana

Hello Sir,
You need to apply the note 1047930, After this the problem should be resolved.
Thanks and Regards,
Deepak...

Report error with the input form using the VC BI integration wizard

Hello All,
I've created a report using the BI integration wizard in visual composer. I've configured the query with the 'Free Form' query template also I've defined the filters there. This is working fine and giving me the report output. When I deploy this , I could see
a start point for the data service.
But instead of the start point with the default values for the filters , I want to have an input form for the users to enter the field values. I added the input form in place of start point. But it's not working even though it doesn't give any error while deploying this report. It gives the following error when I run this report.
" Data service error occurred,cannot execute OLAP queryCannot get data set: Cannot get data set".
Could anybody help on this.
Thanks
Alok

Hi Sandeep,
I'm already draging it from the query input port. Are you referring a different way? How I could have the input variables in the query which I'm creating using the BI integration wizard. To get this input variable I'm trying to add the input form.
Am I doing anything wrong here ?
Pls help.
Thanks
Alok

Help!!! network error on the web form

When I run forms on the web ,
the following errors occurred occasionally,
and I don't know when and where this errors will occurr.
Can anyone help me to solve this problem , Thanks a lot !!!
---<errors details>----------------------------------------------
FRM-99999:A network error occurred,the client will not be able
to continue
Detail...
Java Exception:
Java.lang.StringIndexOutOfBoundsException:String index out of
range:5
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at jaba.lang.RuntimeException.<init>(RuntimeExceoption.java:50)
null

Hi. XieMin dan Rkumarr
I have same problem... I Make
(OWAS 3.0 and Form 6.0) running in
Windows NT 4.0 WoksStation..
FRM-99999:A network error occurred, the client will not able to continue
Details...
Java Exception:
java.net.SocketException: Connection reset by peer
at java.net.SocketInputStream.read(Compiled Code)
at oracle.forms.net.EncryptedInputStream.fill(Compiled Code)
at oracle.forms.net.EncryptedInputStream.read(EncryptedInputStream.java)
at java.io.DataInputStream.readUnsignedByte(Compiled Code)
at oracle.forms.engine.Message.readDetails(Compiled Code)
at oracle.forms.engine.Message.readDetails(Message.java)
at oracle.forms.netStreamMessageReader.run(Compiled Code)
Help me Please .. Thanks.. Alot of
( [email protected] )
null

Syntax error in the Interactive form methods

Hi all,
In one of the method of the interactive form i am using the below statement
DATA:LS_ZDYN_TBL_FORM type WD_THIS->ELEMENT_ZDYN_TBL_FORM.
When i use the above statement i am getting the following syntax error
The type "WDCTX_ZDYN_TBL_FORM" is unknown.
Thanks in advance
Ajay

Try following thigs:
1) Make sure that you have created node 'ZDYN_TBL_FORM' in the context
2) try following code: WD_THIS=>ELEMENT_ZDYN_TBL_FORM.
3) If you are writting this code in the method of a view, try following code:
DATA: t_data TYPE if_<view_name>=>elements_ZDYN_TBL_FORM.
Regards,
Saket.

Error getting the table form SQLdatabase

Hi
I am trying to get the table form database. Connection is fine but when i am trying to display tables:
C Thread ID:6388
C dbmssslib.dll patch info
C    patchlevel   0
C    patchno      72
C    patchcomment MSSQL: Thread check in DbSlDisconnect (969143)
C Network connection used from ACDBD006 to 10.8.191.80 using tcp:10.8.191.80
C Connected to db server : [10.8.191.80] server_used : [tcp:10.8.191.80], dbname: Procurement_Test, dbuser: dbo
C pn_id:10.8.191.80_PROCUREMENT_TEST_BWD
B Connection 6 opened (DBSL handle 1)
B Wp Hdl ConName          ConId     ConState     TX PRM RCT TIM MAX OPT Date     Time   DBHost
B 000 000 R/3              000000000 ACTIVE       NO YES NO 000 255 255 20070830 111230 ACDBD006
B 000 001 R/3*             000000023 DISCONNECTED NO NO NO 000 255 255 20070907 132307 ACDBD006
B 000 002 R/3*BWMON        000000021 DISCONNECTED NO NO NO 003 255 255 20070907 130541 ACDBD006
B 000 003 R/3*DTPLOG       000000022 DISCONNECTED NO NO NO 000 255 255 20070907 131807 ACDBD006
B 000 004 TEST             000000044 DISCONNECTED NO NO NO 004 100 005 20070911 105027 10.8.191.80
B 000 005 ACSCT001         000000042 DISCONNECTED NO NO NO 000 100 005 20070910 132555
B 000 006 BUYIT_CONN       000000110 ACTIVE       NO YES NO 004 100 100 20070911 143721 10.8.191.80
C DbSlBegRead[1]: ##Y4ACDBD006Procurement_Test00000011640000000001143721
C DbSlBegRead[1]: ##Y4ACDBD006Procurement_Test00000011640000000002143721
B Tue Sep 11 14:38:16 2007
B 6: name = BUYIT_CONN, con_id = 000000110 state = INACTIVE    , perm = YES, reco = NO , timeout = 004, con_max = 100, con_opt = 10
B 6: name = BUYIT_CONN, con_id = 000000110 state = INACTIVE    , perm = YES, reco = NO , timeout = 003, con_max = 100, con_opt = 10
C DbSlBegRead[1]: ##Y4ACDBD006bwd00000011640000000017111230
C ParamStmtExec: line 13049. hr: 0x80040e2f The statement has been terminated.
C<b> DbSlModify - Error 26 (dbcode 2627)
C No statement!</b>
C ParamStmtExec: line 13049. hr: 0x80040e2f The statement has been terminated.
C <b>DbSlModify - Error 26 (dbcode 2627)
C No statement!</b>
C DbSlBegRead[1]: ##Y4ACDBD006bwd00000011640000131213111230
C DbSlBegRead[1]: ##Y4ACDBD006bwd00000011640000131213111230
C DbSlBegRead[1]: ##Y4ACDBD006bwd00000011640000000709111230
C DbSlBegRead[1]: ##Y4ACDBD006bwd00000070720000000061111230

Hi
try this
F fact tables are
created without a unique index. However, existing unique indexes are not
deleted. This may sometimes cause a duplicate key during loading to the
InfoCube and thus trigger the above-described short dump.
Run the report SAP_DROP_UNIQUE_FACTINDEX_DB2 to replace the unique index on F fact tables with a non-unique index. Refer also to note 511170.

Error: Before the statement "FORM", conclude with "ENDFUNCTION

Hi All,
I'm using this exit :EXIT_SAPLVEDA_001.
In this exit include zxvedu03 is used.
I have written a perform in this include zxvedu03 :
perform abc.
I have written the code
form abc.
                                         endform.
in include ZXVEDF01.
I have called this
includeZXVEDF01
in the last line of include zxvedu03.
Now i'm getting error :
Incorrect nesting: Before the statement "FORM", the structure
introduced by "FUNCTION" must be concluded with "ENDFUNCTION".
I have even tried to create include from perform statement and then inserted code and vise versa too but results are same.
Please suggest how can i revolve this error.
Thanks.

Hi,
This is my code of include ZXVEDU03:
if ( contrl-sndsad in rl_var2 ) or ( contrl-sndsad in rl_var1 ).
*** Uncommented below perform
perform contract_determine using contrl-sndsad segment
                                                 dxvbak
                                                 dxvbap
                                                 dxvbadr
                                                 dd_flag_k.
endif.
***statements**
include zxvedf01.
Code in includeZXVEDF01 :
form contract_determine using    p_cntrl_sndsad p_segment type edidd
                                                p_dxvbak   structure wa_dxvbak
                                                p_dxvbap   structure wa_dxvbap
                                                p_dxvbadr structure wa_dxvbadr
                                                p_d_flag_k structure wa_d_flag_k.
*** statements**
endform.
Note: Include ZXVEDU03 is in EXIT_SAPLVEDA_001 and ZXVEDF01 is in ZXVEDU03.
EXIT_SAPLVEDA_001-> ZXVEDU03->ZXVEDF01

Error Opening the Adobe Form

Hello Everybody,
I have created an Adobe form and try to open it from the program with FM but I get and error
"Job already open".
Can someone tell me what could be worng.
Thanks,
Sneha SIngh.

in my opinion you get the error when you test it from se37.
create a small testprogramm and it will work!
br
norbert

Dump error at the while form 16 is generated

Hi Guru's,
I am getting dump error when i am excuting form 16 through pc00_m40_f16 as.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_RANGE_OUT_OF_BOUNDS', was not
     caught in
    procedure "FILL_INT_S88" "(FORM)", nor was it propagated by a RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    In the running program "HINCF160", the field "ALPHA" of the type
    "C" and length 26 was to be accessed with the offset 26.
    However, subfield accesses with an offset specification that is not
    smaller than the field length are not permitted.
may i know what may be the problem .Please help me.
Thnaks & Regards

Hello friends and gurus
Any answer for my issue.
B4SAPHCM

Error in Submission Form for WWDC 2015 Student Scholarship

Hi everyone,
When I was submitting the application for WWDC 2015 student scholarship, I found there's a bug in the submission form. My fields got reseted when I pressed 'submit'. My friends who have successfully submitted told me it's supposed to have a 'thank you' page and option to withdraw the application in the account.
I've tried clearing the cache, switching between browsers, using friend's laptop and also different WiFi Network but no luck. Is there anything else I can do?

Ketan: Yes, I am editing it from Adapter Factory. Its a bit weird as the info is definitely available and is used by at least 2 other prepop adapters.

Getting error while trying to open the web forms in classic planning app

hello,
I am new to OTN forum. can someone please help me to resolve my issue in classic planning application.
i have created two web forms in classic planning . but while i am trying to open the web forms ,its showing the error like
the" data form Report1(Report name) is invalid. Check log for details.
i have checked the log file also but was not able to understand the errors.
Before this i have tried lots of things to make this issue fixed like updated JVM size then in task manager i have checked the memory usages for process .
but these were not helpful to solve.
Kindly anyone suggest me the solution.......

It is probably worth refreshing the metadata to see if that fixes the problem; error message might indicate that the form has members on that have not yet been passed to Essbase.
You dont give the version you are using, but for v11.1.2.1 you do this through Workspace, menu options Administration/Application/Refresh Database - tick Database and Refresh. Its advised that you back up your Outline and data before refreshing.
Hope this helps.
JB

Error in the standard HRforms

Dear All,
i cant able to activate the Std HR forms " SAP_TIM_99_0001". its throwing the error in the HR forms generated Print program like "P_IPVIEW" is unknown.
if you have come across the same situation please provide me the solution.
Thanks
Yogesh

No child found in WebDynproContext with name "mss~hras "
check the code where you define that.
see the thhread below which is similar issue
Description attribute of PCD element
Points are welcome if it is helpful
Koti Reddy

Want to run a BDC even if there is an error in the TCode

Hi,
In one of the screens in my BDC an error comes (this happens when that transaction is run from command prompt in foreground also). But in the actual transaction after the user sees the error, he is able to continue changing the fields on the screen and post it. However in BDC, as soon as the error comes, the BDC exits and comes back. I would like it to continue, just the way it does during the manual entry, is there a way I can do this?
The Tcode is LT06 and when user enters the Material doc and click on enter the error occurs, but in the manual mode he is able to enter the Destn Bin, storage type etc and continue. However that is not the case with BDC. I also tried using function module L_TO_CREATE_POSTING_CHANGE, but it gives the same error as the screen
FORM create_to USING r_mblnr TYPE mblnr
                     r_to_lgort TYPE lgort_d
                     r_sto_bin TYPE lgpla
               CHANGING rt_bapi_message TYPE type_t_bapi_message
                        r_success TYPE c.
DATA: v_mode TYPE c,
        wa_bapi_message TYPE bdcmsgcoll.
CLEAR s_bdcdata.
REFRESH t_bdcdata.
PERFORM bdc_dynpro      USING 'SAPML02B' '0203'.
PERFORM bdc_field       USING 'BDC_CURSOR'
                                'RL02B-MBLNR'.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                '/00'.
PERFORM bdc_field       USING 'RL02B-MBLNR'
                                r_mblnr.
PERFORM bdc_field       USING 'RL02B-MJAHR'
                               '2009'.
PERFORM bdc_field       USING 'RL02B-DUNKL'
                                'H'.
PERFORM bdc_dynpro      USING 'SAPML03T' '0102'.
PERFORM bdc_field       USING 'LTAP-NLTYP'
                                r_to_lgort.
PERFORM bdc_field       USING 'LTAP-NLBER'
                                '001'.        "destn storage section
PERFORM bdc_field       USING 'LTAP-NLPLA'
                                r_sto_bin.        "destn storage section
v_mode = 'N'.
CALL TRANSACTION 'LT06'
                   USING t_bdcdata
                   MODE   v_mode
                   UPDATE 'S'
                   MESSAGES INTO t_messtab.
IF sy-subrc <> 0.
IF sy-subrc = 0.
    LOOP AT t_messtab INTO wa_bapi_message.
      APPEND wa_bapi_message TO rt_bapi_message.
      EXIT.
   MESSAGE ID wa_bapi_message-msgid TYPE wa_bapi_message-msgtyp NUMBER wa_bapi_message-msgnr
     WITH wa_bapi_message-msgv1 wa_bapi_message-msgv2 wa_bapi_message-msgv3 wa_bapi_message-msgv4.
    ENDLOOP.
ELSE.
    LOOP AT t_messtab INTO wa_bapi_message.
   MESSAGE ID wa_bapi_message-msgid TYPE wa_bapi_message-msgtyp NUMBER wa_bapi_message-msgnr
     WITH wa_bapi_message-msgv1 wa_bapi_message-msgv2 wa_bapi_message-msgv3 wa_bapi_message-msgv4.
      APPEND wa_bapi_message TO rt_bapi_message.
    ENDLOOP.
   APPEND t_messtab to rt_bapi_message.
ENDIF.
COMMIT WORK AND WAIT.
ENDFORM.                    "create_to
Thanks for reading

Hi ,
Now as per the transaction an error is prompted only when the compiler interprets it as false on a data field or a combination of them . Now its in the programmers hand to validate the data before submitting it to the screen .. now this validation should cover all scenario's . One point i want to make here is that bdc is nothing but replaying how the user enter's manually for no of records..
i dont know about this tcode LT06 .
//The Tcode is LT06 and when user enters the Material doc and click on enter the error occurs, but in the manual mode he is able to enter the Destn Bin, storage type etc and continue. However that is not the case with BDC.//
you are entering the material doc no in screen 0203 ..use all screen mode and check what is the error prompting if any and in the normal debugging track that error if some user exit is written using sy-binpt with some error message..
did you tried some relavant tcode other than LT06 which can be used for this purpose cause sometimes we have alternate tcodes to run the bdc .. please check on this .
Br,
Vijay.

Error in the submission form...

Similar Messages

Maybe you are looking for