Error in the Transfer Workflow

Hi,
  I am using the standard workflow for the Internal Transfer (WS50000031). I have activated the workflow, its working fine other than a single error. Like when the manager transfer a person, its going to the next level(first level) manager. but he cant able to see the form. But the second level manager ( superior for the First level manager ) is receiving the form with the details like who has got transfered, etc.
How can i resolve this issue. Whether the Workflow itself delivered like this.
Please help me to solve this issue.
Thanks
Ram.

Ram,
Could you give us a little bit more information on this. You have mentioned that the first level approer cannot see the form. Does that mean that he is getting the workitem but he cannot see the form (may be as an attachment or something)?
I checked the Standard SubWorkflow that is being called, and a Standard Rule is being used. So the agent determination is done using the same rule for both the first level and the second level.
Regards,
Anwar.

Similar Messages

  • Error During the Transfer of Asset

    Dear Experts,
    I am trying to retire an Asset through ABAVN, But its giving an error Message Viz..
    Partial retirement or transfer of prior-yr acquis. not possible                                                                               
    Message no. AA378                                                                               
    Diagnosis                                                                               
    You tried to post a retirement or transfer, based on quantity or        
         percentage, to asset acquisitions from prior years on asset 180000041 0.
         However, the system could not find any values.   
    I have checked the asset 18000041. Its a group asset and it has a Dep. Key attached with it. but the Depriciation has not happened so as a result there are no values of this particular Asset in Aw01n.
    Kindly help....
    Regards
    Om Prakash Gupta

    Hi All,
    I have already resolved the issue.
    If any one you face this kind of problem, go to ABZON, give the asset nos to retire. give the vaue as .01 to be posted a releveant transaction type and then save it.
    After that try to retire the asset. it will let you to do.
    Regards
    Om

  • Error while opening list workflow in SharePoint designer 2010

    Hi,
    I am trying to open list workflow in SharePoint designer 2010,its showing me the following page.
    Please help me how will be able to edit the workflow.
    While i click on "export to visio",its showing the error as "SharePoint designer encountered an error generating the visi workflow drawing".
    Please help me to get the logic of the workflow,so that i can create new one.
    Thank you

    Hi Aditi,
    Which type of workflow did you use?
    Did you create the workflow using SharePoint 2010 Designer or built-in workflow template?
    If the workflow was created using SharePoint 2010 Designer, for editing the workflow using SharePoint Designer, open the site with SharePoint 2010 Designer, then click the 'Workflows' in left panel. Then in the right panel, click the workflow that you
    want to edit, then click 'edit workflow' under Customization.
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • ODS activation error after the structure change

    Hi all,
          I am getting a short dump with " "DBIF_RSQL_INVALID_RSQL" CX_SY_OPEN_SQL_DBC  "  error when I am trying to activate an ODS after changing its structure. Do I need to change any setting before loading the data in to the ODS after adding few more fields to it. Exact error says
    An exception occurred. This exception is dealt with in more detail below    
    . The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was    
      neither                                                                    
    caught nor passed along using a RAISING clause, in the procedure            
      "ACTIVATE_SIDS" "(FORM)"                                                   
    Thanks

    The above-described symptom is due to a program error during the transfer of error messages. The problem can occur, for example, if a hierarchy is activated during the activation of an ODS object.
    If the indicator 'BEx Reporting' is set for the ODS object, entries are created in the SID tables of characteristics involved during the activation of requests for this ODS object. Newly-created SID values must then be inserted into hierarchy tables. This is not possible for reasons of consistency if a hierarchy is activated at this time. The RRHI_CHAVLS_REQUEST_TO_HIERA function module is used for inserting newly-created SID values in hierarchies.
    To simplify the search for the cause of the problem, additional error messages are now displayed in the monitor. If the problem is triggered, for example, by the simultaneous activation of a hierarchy, the error message RH 14 is issued. As described in note 717967, this error message contains the name of the affected hierarchy. If the activation of an ODS object is cancelled due to a serious error, this now also causes additional entries in the log of transaction SM21 (Syslog). These entries start with the character string '> RSDRO':.
    Solution
    BW 3.0B
               Import Support Package 21 for 3.0B (BW3.0B Patch21 or SAPKW30B21) into your BW system. The Support Package is available whennote 0679665 with the short text "SAPBWNews BW3.0B Support Package 21", which describes this Support Package in more detail, is released for customers.
    BW 3.10 Content
               Import Support Package 15 for 3.10 (BW3. 10 Patch15 or SAPKW31015) into your BW system. The Support Package is available when note 0601055  with the short text "SAPBWNews BW 3.1 Content Support Package 15" is released for customers.
    BW3.50
               Import Support Package 03 for 3.5 (BW3.50 Patch03 or SAPKW35003) into your BW system. The Support Package is available when note 0693363 with the short text "SAPBWNews BW 3.5 Support Package 03", which describes this Support Package in more detail, is released for customers.

  • Error when creating Transfer structures

    Dear Gurus,
                     I get the following error when creating the transfer structure.
    <b>Error when creating transfer structure /BIC/CCBD1CL_OMAT002 in source system ERPCLNT400</b>
    Message no. R3104
    <b>Diagnosis</b>An error occurred when creating transfer structure /BIC/CCBD1CL_OMAT002 as an IDoc segment in source system ERPCLNT400 .
    <b>System Response</b>
    The action was terminated. No data was changed.
    <b>Procedure</b>
    Use the generation log in source system ERPCLNT400 to identify the error, and remove the cause.

    hi,
    Refer OSS Note 147195 --- Error activating the transfer rules
    Check the transfer mehtod is PSA ? and Activate Source Sys Conn again
    Replicate the DS again and Activate TR (...'also check are there inconsistencies in transfer str)

  • Error in the activation of the storage bins

    Im getting an error 'quant xxx for storage bin cannot be counted'.The putaway stock is there in the related bin and batch.(After confirming the transfer order using lt01,the putaway stock is transfered to the total quantity.)The Transfer order is confirmed.then also the error is coouring.What may be the reason?What should be done to eliminate the error?

    the transfer order is usually confirmed with LT12.
    You cannot do a physical count if there is a pick or putaway quantity in the quant.

  • Error while saving a workflow via sharepoint designer: Server-side activities have been updated. You need to restart SharePoint Designer to use the updated version of activities.

    While saving a workflow using SharePoint designer on a SharePoint site, I get the following error: 
    Server-side activities have been updated. You need to restart SharePoint Designer to use the updated version of activities.
    Steps to recreate error:
    Login to the WFE server hosting IIS and workflow manager, open SharePoint Designer 2013 and login to a SharePoint site.
    Access the list using SharePoint Designer 2013, in the workflow section, click new workflow. 
    In the new workflow dialog, enter workflow details, click save (see screenshot below).
    Error message is displayed as below:
    After restarting SharePoint Designer, the saved workflow is not seen in the site/workflows or list/workflow section.
    Workaround
    When the above steps are repeated while accessing the site via SPD from any other box besides the WFE/Workflow manager host server, the error is not encountered and its possible to save/publish workflows.
    Notes
    Workflow Manager 1.0 is installed.
    The site has been registered with Workflow manager using Register-SPWorkflowService
    cmdlet.
    Any clue on why is this happening?

    Hi Vivek,
    Please close your SharePoint Designer application, clear/delete the cached files and folders under the following directories from your server installed SharePoint Designer, then check results again.
    <user profile>\appdata\roaming\microsoft\SharePoint Designer\ProxyAssemblyCache
    <user profile>\appdata\local\microsoft\websitecache\<sitename>
    http://www.andreasthumfart.com/2013/08/sharepoint-designer-2013-server-side-activities-have-been-updated/
    Thanks
    We are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • BW3.5: Error message when trying to activate the transfer rule

    When I was trying to activate the transfer rule for one info object( charateristic with master data) , I got the following error  in [[  ]]
    Error when creating transfer structure /BIC/CCPIZGR00CC_ATTR in source system CI2220
    Diagnosis
    An error occurred when creating transfer structure /BIC/CCPIZGR00CC_ATTR as an IDoc segment in source system CI2220 .
    System response
    The action was terminated. No data was changed.
    Procedure
    Use the generation log in source system CI2220 to identify the error, and remove the cause.
    CI2220 is the backend R/3 system, I had no issue in replicating the data source etc. this error occurred while trying to activate the transfer rule after assigning the info source to the replicated datasource in BW.
    Can anybody tell me how to view( what transaction etc) the generation log to understand the issue?
    Thanks in advance
    Arunabha

    Hi Roberto,
      Thanks for yoyur prompt reply, I would try to follow the instruction, but at the same time please note that previously we had no issue in activating the transfer structure. I would like to see the log in the source system, but don't know how to and which transaction to use etc. any help would be appreciated.
      Thanks
    ARUN

  • Conversion exit error while activating the transfer rules

    Hello gurus,
    We are doing a function module extraction with 3.X data sources.
    On activating the transfer rules , i am getting a conversion exit error for "0fiscyear", but in the infoobject we don't have the conversion exit for it.
    Points will be awarded for any kind of response.
    Thanks and Regards,
    Anu.

    Hi,
    1. Please check in the transformation, its necessary to provide the fiscal variant mapping as well when ur mapping fiscal year object. as on the basis of that value fiscal period will be derived.
    2 I guess ur doing direct mapping (Time conversion) and there is no routine written for that.  if any u can check that as well for any error.
    Thanks
    dipika
    Edited by: Dipika Tyagi on Jun 25, 2008 7:39 AM

  • Service order - Error during account assignment - Avoid the transfer to ERP

    Hello SAP Experts,
    I am facing a problem in CRM when saving Service Orders. An error is coming from my ERP system because the system is trying to tranfer the cost from the CRM Service Order to R3.
    This is the error: Orgfinder: No value found for Organizational Unit BILL_ORG
    I don't need the transfer of costs to the ERP. Can anyone tell me how we can deactivate this option? The item category is relevant for pricing but it is not relevant for invoicing and costs.
    Please help.
    Thanks in advance and regards.

    Hi Savan,
    SAP CRM Status Management is a part of SAP CRM Basic or Base Customization and the link is available in the following path
    IMG --> CRM --> Transactions --> Basic Settings --> Status Management --> Change Status Profile for User Status.
    Here you can influence the status. You can also have a look at the status profile documentation here
    [Status Profile|http://help.sap.com/saphelp_crm70/helpdata/en/92/8269126d1547578aab640f097de32c/frameset.htm]
    Hope this will help.
    Thanks,
    Samantak.

  • HU Identification error at the time of confirming Transfer order

    Hi Guys
    While confirming the Transfer order with respect to Outbound delivery
    We are getting this error
    Source storage unit we have provided is as per our naming convention : sea07+701
    But it is giving this error :Enter a storage unit
    HU identification field it is pointiong the cursor
    CAn any body solve and suggest a solution?????????
    Message no. L3216

    Hi,
    You need to enter the destination SU number as well. There is customizing in the storage type as well as the mvt to decide how the destination SU / HU needs to be determined (either copy source or take pick HU as destination HU for example).
    MZ

  • Trying to Transfer iTunes to a New computer, but I get the error message The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes --- HELP!

    Trying to Transfer iTunes to a New computer, but I get the error message The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes --- HELP

    Did you downgrade iTunes? What version is listed in Help> About iTunes?
    If you don't have iTunes 10.5.2, download it from here -> http://www.apple.com/itunes/download/
    If you have iTunes 10.5.2, try re-creating your iTunes library.

  • Run time error while activating the Transfer Rules

    Hi,
    Error when activating Transfer rules for Infosource :
    0FI_GL_1 -
    (General ledger: Transaction figures)
    Run time error : ASSERTION FAILED
    Transfer rules traffic light is in Green. But when i am trying to activate the Transfer rules, its giving Run time error.
    Thanks,
    Kishore

    Hi,
    As mentioned in the note 939383 , either Import Support Package 08 for SAP NetWeaver 2004s BI (BI Patch08 or SAPKW70008) into your BI system or do correction instructions given in the note.
    It is always better to import the latest patches avialble in service market to avoid this type of problems.
    Also see tha note 1010672 amd check whether it is applicable to your problem.
    With rgds,
    Anil Kumar Sharma .P
    Message was edited by:
            Anil Kumar Sharma

  • Error when activate the transfer ruels

    Hi,
    When we activate the transfer rules for InfoSource / InfoObject 0MATL_TYPE, we
    get the following error message:
    Error while creating table 'EDISEGMENT' entry '/BIC/CIHB0MATL_TYPE_TEXT'
    Thx for answer.

    Hi,
    Check 0MATL_TYPE and attributes are active or not?. check all Infoobject are active or not?. if not then activate objects and then replicate the DS in BW and then activate.
    Thanks
    Reddy

  • Error in the workflow which executes background synchronous webservice task

    Hi,
    I am very new to SAP Workflows. I created a workflow with one activity step in it. The activity step actually executes a task TS77000300 (synchronous calculation - its an SAP task). When I test it. I get an error "Error when starting the service" with exception 8987, area SWF_HTTP and message 125 - Object WEBSERVICE method PROCESSBATCH cannot be executed.
    I checked in WF_EXTSRV tcode, there is an entry for the background synchronous webservice task.
    I checked in SWLWPTSSID table, there is an mapping between task-id and service id from WF_EXT SRV.
    I am not sure where its going wrong. Any help resolving this issue is appreciated. Thanks a lot.
    Regards,
    Raja

    Gurprit/All
    Thanks Gurprit for the direction.
    Even if I execute the the workflow( WS77000647 from SAP). The first step invokes Process Dialog which asks for three numbers and two operands. When I input all the input params and click calculate button, the second step which is actually the background synchronous task, results in the same error in the workflow log and in the Process Dialog page browser it says "Entries sent for calculation" with the same input screen.
    Am I missing anything here to run background synchronous task? Any help regarding this is appreciated.
    Thanks & Regards,
    Raja

Maybe you are looking for