Error in total of Key figure in query designing

Dear Friends,
I am new at query designing & am stuck in a problem.
I have a CKF named Load in the column.
When I select District & Complaint No.in rows the result is some 100 rows and upon exporting the result in excel & summing up load the total comes out to be right..............................
BUT in web browser when i choose only District in the row and the result is a single row the sum of load displayed is incorrect.............wht cn b the possible reason of this??
Thnx in advance.

Hi Dear, i asume every districwise total also calculated. pls check onemoretime.
Regards
Amulu

Similar Messages

Sort data by key figure in Query Designer

Hi Gurus,
Is it possible to sort a query according to a key figure from Query designer?
Thanks

Using condition TOP N is the solution

How to copy restricted key figures in query designer ?

hi,
i have created a query in query designer (BI 7.0).
How can i copy existing restricted key figures ? i can't find anything. i always have to create a new one, and then i have to do all the things like 'details of selection' etc.... manually. that CANNOT be, there MUST be a way to copy those key figures.
any ideas ?
best regards, Martin

Hi Martin,
Restricted key figures can be stored on the infoprovider basis . For which right click on the key figure (left hand side pane ), Select the necessary key figure and assign the restriction through characteristics combination, and give it a restriction and save it . Next tiem when you create query on the same info provider it should appear in the left hand side as readymade reusable piece .
Hope that helps.
Regards
Mr Kapadia

How to search for Key Figures in Query Designer 7.0?

Hi,
in BEx Query Designer 3.5 there was a search function to look after key figures or characteristics. Is there a search function in Query Designer 7.0?
Thanks.

Hi,
QD 3.x version has "Find" option to identify the KF and Characteristics,but the same is not available with QD 7.x.
Reason could be:
With QD 7.x,just by typing the starting letters of KF or Characteristics by Keyboard itself,it will highlight you the entries.Hence there is no explicit Find option provided.But in case of QD 3.x,they gave it explicitely.
Rgds,
Murali

Calculated Key Figures in Query Designer - translation

Hello Experts,
I created a few Caclulated Key Figure in the Query Designer. They have a GUID and a text description.
I would like to know:
1) How these CKF are represented in ABAP on the system and where I can find them - some database table ?
2) If I want the description to be available in many languages how can I handle this ?
Thanks a lot
Rado

Check this
Tables analysed by analyze_rsz_tables
Khaja

Currency translation for a restricted key figure in Query designer

Dear Experts,
In my query i am using a restricted Keyfigure (ZRKF1 which is reusable). I have to change the currency translation key of the restricted Key Figure from zcur1 to zcur2. I am not able to edit zrkf1 Currency translation in the properties( It is in gray colour) ,while i can do it for a normal keyfigure. if i edit zrkf1 then other queries will be affected. How should i solve this? Can i copy and paste the zrkf1 to zrkf2 in order to use zrkf2 with currency translation zcur2 in my query ? How can i coy and paste restricted key figure?
Thanks,
Riya

Hello Riya
I think you can't change the currency transaltion type for RKF... to change it in RKF just make the changes in the KF which you have used in RKF....
If you don't want to change the CURR translation type in KF1 than copy it paste it (KF2)and change in that KF2...now u can use KF2 in restricted KF...
Thanks
Tripple k

Restricted Key Figure in Query Designer

Hi,
I have defined a Input-Variable on the Characteristic 0PURCH_ORG (Purchasing Org.) in the Query Designer.
This Variable is Mandator and represents "Selection Option". Means, the user has to give the Input-Varaible for ex. 0010...0011.
Now my requirement is to define a restriced key figure where these Purchasing Org. from Input-Variable must exclude
in the restriced key figure. I cannot exclude the Input-Varaible in restriced Key Figure as it represents "Selection Option".
I tried to define a Customer-Exit Variable (Selection Option) on the Characteristic 0PURCH_ORG which should exclude the Input-Variable.
But the ABAP-Code for Customer-Exit Variable doesn't work.
Any clue, how I can solve this problem?
Thanks

Hi Moha Nan,
A variable of the type selection option can not be excluded therefore a variable exit is your only option. What is the current ABAP you have written and why doesn't it work? Maybe we can find the issue with the coding.
You need one variable of the type selection option and another one to read the first variable and reverse the option sign (from include to exclude).
Regards,
Alex.

Creating a resticted Key Figure in Query Designer (3.5)

Hello, hope your all well!
I'm trying to create a restricted key figure that's related to the publication date of one of our titles.
I've tried to create a Structure that shows one text result if the publication date is the same or greater than 01.01.2008 and another if it's less. However, in my results it seems to be bringing two results for each line, one with each text result.
Could anyone point my in the right direction?
Have a fantastic weekend,
Rhys

Sorry, I'm new at this; what do you mean by inputs?
I'm trying to create something in the query designer that displays one text result if the result is lower than a certain number and another if higher,
Hope that makes sense.
Take care!
Rhys

Aggregation ---Settings of KF(Key Figure) in Query Designer

Hi,
What is the impact of the following setting in the query result
Query Designer>KF Definition>Edit-->Aggregation (TAB)
Exception Aggregation-->MAximum and
Ref Characterstic
Thanks

Hi,
To enable the calculation of key figures, the data from the InfoProvider has to be aggregated to the detail level of the query and formulas may also need to be calculated. The system has to aggregate using multiple characteristics. In regard to a selected characteristic, the system can aggregate with another rule for each key figure (exception aggregation).
http://help.sap.com/saphelp_nw04s/helpdata/en/75/21054da1392649948e5b94e4fc4bce/frameset.htm
Exception aggregation ?
http://help.sap.com/saphelp_nw04s/helpdata/en/43/53717c223a1bcde10000000a1553f7/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/47/4d6d902dbb22c5e10000000a42189d/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/47/5dfdca3ea9427fe10000000a42189d/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/d2/e0173f5ff48443e10000000a114084/frameset.htm
Rgs,
I.R.K

Building a new Cube Vs Restricted Key figure in Query - Performance issue

Hi,
I have a requirement to create a OPEX restricted key figure in Query. The problem is that the key figure should be restricted to about 30 GL Accounts and almost 300 Cost centers.
I do not know if this might cause performance issue in the query. At the moment, I am thinking of creating a new OPEX cube and load only those 30 GL Accounts, 300 cost centers and Amount. and include OPEX in multiprovider in order to get OPEX
amount in the report.
whats the best solution - creating OPEX restricted key figure or OPEX cube ?
thanks,
Bhat

I think you should go for cube as all the restrcited key figure are calculated at OLAP runtime so it will definitely affect the query performance.There are a lot of costcenter for which you have to restrict it so definitely during the runtime of query it will take a lot of time to fetch tha data from infoprovider.Its better that you create a cube with the restrictions and include it in MP.It will definitely save a lot of time during query execution
Edited by: shyam agarwal on Feb 29, 2012 10:26 AM

Do i have to select all the key figures when i design a query off of a cube

Do i have to select all the key figures when i design a query off of a cube? i have three keyfigures on the top of the three keyfigures it says calculated keyfigure. kind of lost dont know what to do. please let me know.
Thanks!
York

No, you have to select at least one.
Calculated keyfigure (CKF) means it's a formula of two or more other keyfigures. You can select, right-mouse click, display properties and you see how it is composed.
Under calculated keyfigures you see all available keyfigures of the infoprovider you build the query on. Just move them by drag-and drop from the left to the right into the columns.
You can have also restricted keyfigures (RKF). This means a keyfigure is restricted by one or more characterstics and their values.
Hope you got an idea.
Regards,
Juergen

Key date in query designer

Hi All,
I have a requirements to read data based on t.code S_AHR_61016403 by using Trip Begins On date and filter by receipt date therefore I’m using DS 0FI_TV_01 and able to get data into Cube level correctly.
In Query designer, I have to use trip beginning date and filter by receipt date then put in MTD and YTD bucket based on receipt date.
For example, trip beginning date 01.07.2014 – 31.07.2014, could get 100 records which has different months data with total amount1500/- but based on receipt date 01.07.2014 – 31.07.2014 there are only 75 records with total amount 1000/- I only interested total value 1000/-
I’m thinking to create a Key Date in query designer to read beginning date range and receipt date range.
Can anybody give how to achieve this.
regards
Naani

0FI_TV_01 is a transaction datasource. Hence your Trip begin/Enddates are transactional data. You cannot use them as part of Key date in Query designer.
One more thing, you can't use ranges in Key date. It works only with single date.
you have to either create two variables in query filter. or restrict your KF with both variables.

How to fill a Key figure at Query run time

Hi All,
I have a requirement where I have to fill a key figure while the query is running. This value is obtained by multiplying 2 attributes of a Material Master Data object.I could have used Formula Variable but there are two problems -
1. I have material in my info provider but not this Material Master Data object.
2. For a particular material, there are multiple rows in the Master Data object. And I have to pick only one row by applying some condition on a field of the MD object.
Please let me know if there is some way to implement this.

Hello,
You can obtain this using virtual KF. Create a KF and include in the cube on which report is built. Dont have any mapping/rule for the same.
Now write ur code using SMOD and populate this KF during runtime.
Regds,
Shashank

InfoSet - Calculated Key figures in query

Hi
I created an InfoSet from two cubes, and a query to report from the InfoSet , I noticed that the query displays the keyfigures twice, e.g., I have gross sales in both cubes so it appears on the left side of query designer twice. When I created the InfoSet I turned off these key figures but they still appear on the left side of the query and doubled.
Any suggestion?

This might be b'coz you didn't select which infoprovider the Key figures should be picked from.
Hence it's select both the infoprovider and displaying the values twice.
Regards,
Hima

Restricted/Calculated Key Figures in Query vs MDX?

Hello All,
We are embarking on our first project utilizing SAP BW as the Data Warehouse and Web Intelligence as the presentation tool.
We plan on creating the universes on BW Queries.
What are the pros and cons of using Restricted and Calculated Key Figures in the query versus creating them in the Universe? Also from a performance impact point of view if there is any?
Best Regards,
Dan Krieg

Hi Dan,
I would suppose that there is no big influence on performance. If the calculation for the calculated key figures are very complex I would propose to calculate them on query level. So its easier to use them also in other environments.
Please take into consideration that OLAP universes are not supported in Crystal Reports. More information you find in the thread [OLAP universes and Crystal Reports|OLAP universes and Crystal Reports;.
Regards,
Sebastian

Error in total of Key figure in query designing

Similar Messages

Maybe you are looking for