Error in TP Profile

Hi Experts,
We have configured STMS between DEV,QAS and PRD systems and it was working fine without any issues. we have shared trans directory in DEV server. DEV is the domain controller in the landscape. OS is Windows 2008 R2, SAP NW 7.31/7.4, DB is Oracle 11g
Last week, we encountered unexpected power shutdown in the data center and we started the servers. since that day we are facing an tp error in STMS configuration. it is showing error could not read the tp profile file however the <sid>adm of quality has full authorization in the shared trans directory.
We deleted the STMS configuration and tried to reconfigure but could not read/write file DOMAIN.CFG and TP profiles. we have restarted the windows server 2008 R2 and tried, it was working.
now, quite frequently we are getting an issue with STMS as tp profile read error. we have to manually restart the server to resolve the issue.
we noticied that group policy error in the event log and resolved but still getting the same error. Please find attached screenshots. Please find the error below, it says transdir not set but it is already set in the profile.
Do we need to check anything in windows level.
Error:
This is tp version 380.13.51 (release 721, unicode enabled)
E-\\DEV\sapmnt\trans\bin\TP_DOMAIN_<SID>.PFL could not be opened.
EXIT
Error in \\DEV\sapmnt\trans\bin\TP_DOMAIN_<SID>.PFL: transdir not set.
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0208

Hi Sriram,
1. On your dev system(TMS Domain Controller s) are you able to access the SAP share folder?
Yes, I am able to access the folder.
2. On Domain controller(Dev system) could you check the all the system status are showing as green?
Yes, all the systems are active and able to import the TR after the restart of Windows OS.
3. On SAP landscape have enable the firewall or UAC or an Antivirus software installed?
Yes, UAC is enabled and Antivirus is running but we have not faced this issue earlier since both UAC and antivirus are active from few months back. we are facing this issue since couple of week.
Thanks,
Pradeep

Similar Messages

Error while copying profile...

Error while copying profile from the default profile...
runtime error- DBIF_RSQL_INVALID_REQUEST
pls help..

Irfan,
You check weather new role name is in Z,Y name space or not?, check the same thing in other clients as well. If you are in windows , then your server mey need reboot because i faced similar problem but sorted after reboot.
Regards,
Hari.
PS: Points are welcome.

Invoice EDI error : EDI: Partner profile inbound not available

Hi EDI experts ,
We are connecting our SAP ECC 6 ( Ehp 4) system to 3rd party system Mincom via SAP PI, to send PO Creation message (Outbound) and receive Vendor Invoice message( inbound). We already done all the settings..Output determination procedure, Partner Profile ( WE20) , Port creation , Condition Records, EDI settings in SPRO for invoice..etc as below:
Logical system ( BD54)
ECC system - EDACLNT112,
PI systems u2013 IDACLNT210
Third party u2013 LSMINCOM
Port ( WE21)
IDACLNT510 : For PI with RFC destination IDACLNT510
Partner ( WE20)
LSMINCOM : (Partn.Type LS)
Outbound parmtrs.- Partner Role- LS, Message : ORDERS , Port - IDACLNT510
Inbound parmtrs.- Partner Role- LS, Message : INVOIC , Message Variant- MM, Process code u2013 INVL, Trigger immediately (Process code INVL have Identification - IDOC_INPUT_INVOIC_MRM, Option ALE u2013 Processing with ALE services , Processing type- processing by functional module)
Here PO Creation is working fine . IDoC of PO outbound message have below details :
Recipient information:
Port :     IDACLNT510 (Logical system & Port created in WE21 )
Partner Number : LSMINCOM   ( Logical system and Partner created in WE20)
Partn.Type : LS
Function : LS
Sender information:
Port : SAPEDA ( donu2019t know how it created..but in WE21..it is not there)
Partner number:   EDACLNT112 ( Logical system and Partner created in WE20)
Partn.Type : LS
Partner Role :Blank
Just started testing, our PI team is sending the IDoC, with wrong information on partner & other data, so inbound IDoC failing with error u201CEDI: Partner profile not availableu201D. Oaky. I reprocessed these failed IDoCs by changing Partner data just opposite (i.e. Sender info as Recipient info & vice versa) to successful PO Creation O/B message in WE19 in EDIDC and when I click on u201CStandard Inboundu201D, then another window open giving error message u201CPartner profile not maintainedu201D and creates new IDoC with status 56
EDI: Partner profile inbound not availableMessage no. E0337
Diagnosis
An inbound partner profile could not be found with the following key:
/LSMINCOM/LS//INVOIC///X/
This involves the key fields of table EDP21:
-SNDPRN partner number of sender
-SNDPRT partner type of sender
-SNDPFC partner function of sender
-MESTYP logical message type
-MESCOD logical message code
-MESFCT logical message function
-TEST    test flag
Procedure
Please check the inbound partner profiles.
Execute function
I am not getting exactly what inbound partner profile could not be found or what is the problem here . Can anyone suggest me what should be the problem and solution on it ?
Thanks
NAP

Narendra,
Please advice what was the solution.

OAF pages open up with error when FND_VALIDATION_LEVEL profile set to ERROR

Hi,
We get error “You have insufficient privileges for the current operation. Please contact your System Administrator.” when we access the OAF page on a click of a link .
On a click of a link in a OAF page a new OAF page should open up. This is achieved by following piece of code
String javaS = (new StringBuilder()).append("javascript:openWindow(top, 'OA.jsp?page=/XXX/oracle/apps/cs/XXX/XXX/webui/ViewRulesPG&paramRoot=RULES&reportname=").append(strViewRepName).append("&retainAM=N&addBreadCrumb=N','modal'").append(",{width:screen.width,height:screen.height-30,top:0,left:0").append(",resizable:false},true, 'document', null);void(0);").toString();
bodyBean.setOnLoad(javaS);
This works fine when the FND_VALIDATION_LEVEL is set as 'None' but gives the error when the profile is set as 'Error'. We can't go with this work around.
Please suggest
Regards,
Mrugesh

FND_VALIDATION_LEVEL is a profile option that should always be set to ERROR. It is not advisable to set it to NONE, just to enable your javascript. The profile ensures that the page is well secured when accessed through Oracle Applications, applies the necessary security similar to seeded OAF pages. OA Framework does not support javascript functionality such pop-ups (you can do it but ) but does not guarantee that the page is secure from outside world (web traffic or cross-browser attacks) when the FND_VALIDATION_LEVEL=None. Work with Dialog pages instead of pop-ups or otherwise limit the page functionality, as javascripting is not recommended in OAF pages.
-Vikram

Access RemoteApp error: The User Profile Service service failed the sign-in

I have couple of users in MYAPPS group that is a part of Collection.
Only me (domain admin) and other domain member user can access the app from RDWEB.
When an other domain admin and an another domain user try to access the app (from different machines) they get:
"Access RemoteApp error: The User Profile Service service failed the sign-in"
RDS is Server 2012 R2 clients W7, W8.
I found all kind of troubleshooting for Vista and W7 non RDS scenario.
What it could be? A bit confusing... one admin Yes another no. The same for regular domain member
1. users can login to RD Web (https:../rdweb) . The published app appears
2. When clicking on the app icon the screen below appears
"When you hit a wrong note it's the next note that makes it good or bad". Miles Davis

Checked Event. There were errors indicating that default profile files cannot be copied to user_name profile.
One of them:
Windows cannot copy file
\\?\C:\Users\Default\AppData\Local\Microsoft\Windows\WinX\Group3\08 - Power Options.lnk to location
\\?\C:\Users\blue\AppData\Local\Microsoft\Windows\WinX\Group3\08 - Power Options.lnk. This error may be caused by network problems or insufficient security rights.
DETAIL - The process cannot access the file because it is being used by another process.
After doing more research I found a suggestion that actually fixed the problem instantly:
-- We also see this problem. You should try to uninstall KB2919355 --
Other people experience the same problem with RDS 2012.
Here is the discussion:
http://serverfault.com/questions/590651/copying-default-profile-for-new-users-fails-with-the-process-cannot-access-the
I did check KB2919355. It looks like pretty important...
All future security and nonsecurity updates for W8.1 and 2012 R2 require this update to be installed...
So how to deal with this thing?
May be somebody from Microsoft will see this post and can suggest other workaround instead of removing the important patch.
Thanks Jay for pushing me to check Event :)
"When you hit a wrong note it's the next note that makes it good or bad". Miles Davis

Error in uploading profile

Friends,
I am trying to create a new Org in the Portal.So In the psconsole I downloaded the "enterprise sample" display profile and then I try to upload the display profile to my new org.
It gives the error:
Upload Display Profile Error
Upload Display Profile Failed. Please check the portal debug logs for more details. View console logs for details. For additional information, view admin logs.
Also in the logs i see
DesktopService not assigned to this dn : o=DavRx,dc=dav,dc=corp
Can anybdy tell me whats the issue?
I actually did the same thing earlier(a month back) and I was able to do so successfully.But I am not sure why its not happening now.
Please respond!!
Thanks,
Deepak.

Looks like the portal desktop service is not assigned to the org o=DavRx (if that is the org which you created)
1. Login to amconsole (access manager console)
2. click on your organization
3. select services from the "view" dropdown
4. click on "Add" button and add portal desktop services (you can also add all the services)
Now login to psconsole -> portals tab -> click on your portal -> add your org using "Add Dns" button and then select it from the select DN listbox and set the ParentContainer, EditContainer and Desktop type if it is already not inherited from its parent.
HTH

Bacgflush error: Change REM profile

Hi Gurus,
I have tried to backflush a part number. I get this error:
'Changed REM Profile regarding generation of postprocessing records'.
From my knowledge we didn't chnge the REM profile and product cost collecter is also avilable.
Please help to resolve the error.
Thank you.
Naveen

Dear Naveen,
Check whether did you make any config changes in the REM profile in OSP2 or else assigned some other REM profile which
allows reprocessing.
In my understanding if already some reprocessing exists for that material in MF47,and if you try to change the REM profile and
try to backflush,this will give this error.
Check and correct me if i 'm wrong.
Regards
Mangalraj.S

Error in Xchange profile

Hi ,
I want to change aai parameters to replace local to central SLD. But i am getting the following error in xi profile.
http://hostname:50000/webdynpro/resources/sap.com/com.sap.xi.exprofui/XIProfileApp
once logged in i am getting the below error.
dbconnect.prop: failed to load properties file
Please help me on this.
thanks
Kirthi

Hi ,
Thanks for the suggestion. In the note 1525193, while creating Java RFC destination XI_EXCHANGE_PROFILE it is mentioned like we need to enter the logon data of the user PILDUSER. But PILDUSER doenot exist either in PI 7.3 or in sol man(central SLD).
Can you please tell me do i need use the user maintained in SLDAPICUST of Sol man?
Regards,
Kirthi S

When starting Firefox, error on missing profile comes up. Need help to get the profile

After downloading Firefox version, can not start as error for missing profile comes up

Try to delete the profiles.ini file to make Firefox create a new default profile or create a new profile yourself.
* http://kb.mozillazine.org/profiles.ini_file
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_Manager
*https://support.mozilla.org/kb/Managing+profiles

Windows 7 "Error Saving Wireless Profile"

I heve problem with wireless network connection
it says
Windows has encountered an error saving the wireless profile.
Specific error: The system cannot find the file specified.

Have checked your computer for viruses? You might want to check this article: http://www.sevenforums.com/network-sharing/328929-error-saving-wireless-profile.html

MC87- create plan-Error: The evaluation profile SAP___A001 could not be read

Hi,
I am faceing error while saving SOP plan (MC87) in DEV server only. not in Quality Server.
Error:
The evaluation profile SAP___A001 could not be read
Message no. CY330
Thanks,
Jishu

Hi Nakul
thanks alot for the response.
APS is up and DF included in the APS services.
I also checked the SAP Note 1690334. But that error describes another error message.
I dont have any problem to create another relational connections like ERP6 or OLAP connections to connect BW.
Just having problem with SAP Netweaver BW JCO one.

Error while running Profile synchronization (Event ID: 6398)

Hi,
We had our User Profile Synchronization service in stopped state for quite some time due to our SQL server having "Named Instance". Since RTM version had this compatibility issue, I patched my farm with SP2 + FEB 2014 CU.
Now the "User Profile Synchronization Service" is running (I started it and now it was a success). However when I start the Profile sync job (either INC or FULL), it fails. This is the error I get:
The Execute method of job definition Microsoft.Office.Server.UserProfiles.UserProfileImportJob (ID c10650ed-0935-47a5-b3ce-a307c576ad9a) threw an exception. More information is included below.
Operation is not valid due to the current state of the object.
Log Name: Application
Source: Microsoft-SharePoint Products-SharePoint Foundation
Date: 6/25/2014 3:47:16 AM
Event ID: 6398
Task Category: Timer
Level: Critical
Keywords:
User: ST\sps02-svc
Computer: EMEA-MOSS1.st.stroot.local
Description:
The Execute method of job definition Microsoft.Office.Server.UserProfiles.UserProfileImportJob (ID c10650ed-0935-47a5-b3ce-a307c576ad9a) threw an exception. More information is included below.
Operation is not valid due to the current state of the object.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-SharePoint Foundation" Guid="{6FB7E0CD-52E7-47DD-997A-241563931FC2}" />
<EventID>6398</EventID>
<Version>14</Version>
<Level>1</Level>
<Task>12</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2014-06-25T03:47:16.577398600Z" />
<EventRecordID>484089</EventRecordID>
<Correlation ActivityID="{A6F9E131-4925-4889-A759-5F873C4B2E74}" />
<Execution ProcessID="9140" ThreadID="7372" />
<Channel>Application</Channel>
<Computer>EMEA-MOSS1.st.stroot.local</Computer>
<Security UserID="S-1-5-21-1058282146-1732951074-3797079023-18290" />
</System>
<EventData>
<Data Name="string0">Microsoft.Office.Server.UserProfiles.UserProfileImportJob</Data>
<Data Name="string1">c10650ed-0935-47a5-b3ce-a307c576ad9a</Data>
<Data Name="string2">Operation is not valid due to the current state of the object.</Data>
</EventData>
</Event>
Here are the observations:
- User Profile Synchronization Service - Running
- User Profile Service - Running
- Both FIMS - Running
- On User Profile Service Application page, I see "User Profile Sync is not currently provisioned."
- If I go in for "Configure Sync Connections" I see --- The query returns nothing.
- On clicking "Create new connection" I get this error:
What could be wrong now?

Clear the file system cache on all servers in the server farm on which the Windows SharePoint Services Timer service is running. Please refer to the following link:
http://ahmedmadany.wordpress.com/2011/05/08/user-profile-service-an-update-conflict-has-occurred-and-you-must-re-try-this-action/
Make sure that the SharePoint Farm account, which is created during the SharePoint Farm setup, is a member of the local Administrators group where the User Profile Synchronization service is deployed.
Make sure that the SharePoint Farm account is able to log on locally on the server where User Profile Synchronization is deployed.
More information are provided in the link below:
http://www.sysadminsblog.com/microsoft/user-profile-service-an-update-conflict-has-occurred-and-you-must-re-try-this-action/
http://www.sysadminsblog.com/microsoft/event-6398-microsoft-sharepoint-administration-spsqmtimerjobdefinition-exception/
If this helped you resolve your issue, please mark it Answered

Firefox Error with Roaming Profiles "Could not initialize the application's security component"

Hi there
I get the common error "Could not initialize the application's security component" when I startup Firefox.
I tried this manual: http://support.mozilla.org/en-US/kb/couldnt-initialize-applications-security-component
I have enough space left, i have read/edit/write-rights, created a new firefox profile and also reset all the settings, nothing works.
BUT I dont have a cert8.db File in my %APPDATA%\Mozilla\Firefox\Profiles
What can I do?
Like I said in my description, its about Users that are logged in with a Roaming-Profile. Every User has this problems, it doesn't matter if or without Admin-Rights.
Also this problem exists since Firefox 4.0.0, the last working Version was 3.6.13 I guess.

You can use this button to go to the Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
Try to remove or rename secmod.db (secmod.db.old) in the Firefox profile folder.
If that didn't help then also rename the cert8.db file to cert8.db.old or delete the cert8.db file to remove intermediate certificates that Firefox has stored.
If that helped to solve the problem then you can remove the renamed cert8.db.old file.<br />
Otherwise you can rename (or copy) the cert8.db.old file to cert8.db to restore the previous intermediate certificates.<br />
Firefox will automatically store intermediate certificates when you visit websites that send such a certificate.
Do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 25: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you lose personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
If you keep having problems then also create a new profile.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

FIREFOX wont load. I get this error message.Firefox profile cannot be loaded. It may be missing or inaccessible

FIREFOX wont load. It just started yesterday. I get this error message."Firefox profile cannot be loaded. It may be missing or inaccessible"

See http://support.mozilla.com/en-US/questions/813663

REQIMPORT errors when security profile set using 12I

I am submitting the purchase requisition import using the following script in release 12I. The request is submitted but completes with an error.
declare
l_request_id NUMBER;
l_batch_id NUMBER := 1027;
l_ou_count NUMBER;
l_org_id NUMBER := fnd_global.org_id;
l_ou_name VARCHAR2(200);
BEGIN
fnd_global.apps_initialize (1759 -- User ID
,50557 -- Responsibility ID
,201); --Application ID
mo_global.init('PO');
mo_global.set_policy_context('S', l_org_id);
mo_utils.get_default_ou(l_org_id, l_ou_name, l_ou_count);
dbms_output.put_line('OU Name: '||l_ou_name||' OU count: '||l_ou_count||' ORG ID: '||l_org_id);
l_org_id := mo_utils.get_default_org_id;
dbms_output.put_line('Default ORG ID: '||l_org_id);
l_request_id := fnd_request.submit_request
(application => 'PO'
,program => 'REQIMPORT'
,description => NULL
,start_time => SYSDATE
,sub_request => FALSE
,argument1 => 'CONSIGNED MANUAL'
,argument2 => l_batch_id
,argument3 => 'LOCATION' --'Location'
,argument4 => NULL
,argument5 => 'N'
,argument6 => 'Y');
dbms_output.put_line('Request ID: '||l_request_id);
END;
The MO: Default Operating Unit and MO: Operating Unit profiles are setup for the given responsibility with an operating unit value. The MO: Security Profile profile is set to a given profile at the site and responsibility level.
When I remove the MO: Security Profile at the site level the purchase requisition concurrent request completes successfully. Only when the MO: Security Profile is set at the site level is the purchase requisition concurrent program submitted using the attached script erroring out.
I can submit the purchase requisition import using the submit request form without any errors. I believe this is because the operating unit field is being populated.
Has anyone run into this issue? Am I missing any commands that define the operating unit used in the concurrent program submission in release 12I?
Any help is greatly appreciated.
Charles

Hi,
Only when the MO: Security Profile is set at the site level is the purchase requisition concurrent program submitted using the attached script erroring out.Please see if the guidelines about this profile option in the following documents help.
Note: 784609.1 - How Does R12 MOAC Defaulting Rules and MO: Security Profile Work?
Note: 397362.1 - Multi Org Access Control (MOAC) in Oracle Purchasing
Note: 420787.1 - Oracle Applications Multiple Organizations Access Control for Custom Code
Regards,
Hussein

Errors in Data Profiling job

Anyone seen anything like this before ?
INFORMATIONAL Aggregation and Data Type analysis for object FEEDER_CNT_LUT
Error Error loading object: FEEDER_CNT_LUT
Error ORA-00942: table or view does not exist
ORA-06512: at "OWB.WB_RT_PROFILE_SERVICE", line 672
ORA-06512: at "OWB.WB_RT_PROFILE_SERVICE", line 974
ORA-06512: at "OWB.WB_RT_PROFILE_SERVICE", line 1796
ORA-06512: at line 1
INFORMATIONAL Aggregation and Data Type analysis for object FEEDER_EQUIPMENT_LIST
INFORMATIONAL Data rule analysis for object TRACK_CMT complete in 0.016 s.
INFORMATIONAL Referential analysis initialization.
Error ORA-06502: PL/SQL: numeric or value error
ORA-06512: at "OWB.WB_RT_PROFILE_SERVICE", line 1677
ORA-06512: at "OWB.WB_RT_PROFILE_SERVICE", line 1706
ORA-06512: at "OWB.WB_RT_PROFILE_SERVICE", line 1264
ORA-06512: at line 1
INFORMATIONAL Referential analysis for objects.
Error ORA-01722: invalid number
ORA-06512: at "OWB.WB_RT_PROFILE_SERVICE", line 2018
ORA-06512: at "OWB.WB_RT_PROFILE_SERVICE", line 1327
ORA-06512: at line 1
INFORMATIONAL Data profiling operations complete.
INFORMATIONAL Functional dependency and unique key discovery for object STREETNAMES
...

Have you profiled this data before? I looks from the error messages as if data rules are being applied to the tables and those rules are failing due to datatype mismatches?No, this is the first time that we have run profiling.
The first error implies the table/view is no longer present in your schema. The error implying the table/view is no longer there is odd because the tables were not manually deleted and in fact I checked after the failure and all the tables are still there...
Are you creating a completely new data profile module? Yes, this is a completely new data profile module.
Are your re-running the profiling having made changes to the data rules or profiling options? No, this is the first run.

Error in TP Profile

Similar Messages

Maybe you are looking for