Error in tranformation

Hi all,
R/3 side
I have created a generic extractor using functionmodule.
(For the FM a structure was created in Se11 )
The fields are VBELN ERDAT NETWR POSNR MATNR WAERK.
Generic extractor sucessfully created,Checked in RSA3 by giving selection criteria for VBELN and i can see data over there.
BI side.
Replicated and created a infopackage and loaded the data.Now i have the same number of data which was seen in RSA3 also in PSA.
The problem arises when i create a infocube and do the transformation.
i am not able to create a transformation beacause of the netwr field.It gives me a error.I created my own infoobjects for the source fields with respect to the characteristics of the source fields.
error: Rule 5 (target: IN_NETWR): Source parameter 0006 is not being used.
Can some one tell me how to proceed further.
Regards,
Harish

Hi Pravender,
I have tried to include 0currency in my KF but it dint work out.
For my Clarification
R/3
My source fields VBELN ERDAT NETWR POSNR MATNR WAERK.
In BI
I create VBELN ERDAT NETWR POSNR MATNR WAERK infoobjects with the characteristics as source.
But the problem is when i create NETWR and WAERK infoobjects(KF).I cant assign the actual length of those fields in the source system.
After creating the infoobjects i have added all these fields in the infocube.
And when i do the transformation i get this problem.
Please help.
Regards,
Harish
Edited by: Harish3152 on Mar 3, 2010 9:20 AM

Similar Messages

Error in Tranform Activity While Writing From File to DB Table

Hi All,
I m trying to read the contents of a csv file and writing it to the db table.
When I am trying to map the file content to the db table using tranform activity, I am getting error as "failed to save XSL Map. Make sure XSL Map is valid".
Any ideas on how to over come this issue.
thnx in advance
Edited by: md.irfan.khan on Sep 7, 2009 4:00 AM

followed the steps mentioned below. but still I'm getting the same error:
my transform.xsl file is as follows:
<?xml version = '1.0' encoding = 'UTF-8'?>
<ns0:SampledataCollection xmlns:ns0="http://xmlns.oracle.com/pcbpel/adapter/db/top/dbWriteService">
<ns0:Sampledata>
<ns0:firstnm>1</ns0:firstnm>
<ns0:gender>2</ns0:gender>
<ns0:age>3</ns0:age>
<ns0:lastnm>4</ns0:lastnm>
</ns0:Sampledata>
<ns0:Sampledata>
<ns0:firstnm>5</ns0:firstnm>
<ns0:gender>6</ns0:gender>
<ns0:age>7</ns0:age>
<ns0:lastnm>8</ns0:lastnm>
</ns0:Sampledata>
<ns0:Sampledata>
<ns0:firstnm>9</ns0:firstnm>
<ns0:gender>10</ns0:gender>
<ns0:age>11</ns0:age>
<ns0:lastnm>12</ns0:lastnm>
</ns0:Sampledata>
</ns0:SampledataCollection>
Logs from Audit Trails Activity:
<?xml version="1.0" encoding="UTF-8" ?>
- <audit-trail>
- <event sid="0" cat="2" type="2" n="0" date="2009-09-08T10:14:48.080+03:00">
- <message>
- <![CDATA[ New instance of BPEL process "file2DbProcess" initiated (# "40001").
]]>
</message>
</event>
- <event sid="BpPrc0.1" cat="1" type="2" label="process" n="1" date="2009-09-08T10:14:48.095+03:00" psid="0">
- <message>
- <![CDATA[ _cr_
]]>
</message>
</event>
- <event sid="BpTry0.2" cat="1" type="2" n="2" date="2009-09-08T10:14:48.127+03:00" psid="BpPrc0.1">
- <message>
- <![CDATA[ _cr_
]]>
</message>
</event>
- <event sid="BpSeq0.3" cat="1" type="2" label="sequence" n="3" date="2009-09-08T10:14:48.127+03:00" psid="BpTry0.2">
- <message>
- <![CDATA[ _cr_
]]>
</message>
</event>
- <event sid="BpSeq0.3" cat="2" type="2" wikey="40001-BpRcv0-BpSeq0.3-1" n="4" date="2009-09-08T10:14:48.158+03:00">
- <message>
- <![CDATA[ Received "inputVariable" call from partner "client"
]]>
</message>
<details id="0" />
- <detailsTemplate>
- <![CDATA[ <inputVariable><part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="payload"><toReplace id="0"/></part></inputVariable>
]]>
</detailsTemplate>
</event>
- <event to="Invoke_fileService_SyncFileReadOperation_InputVariable_1" sid="BpSeq0.3" cat="2" type="1" wikey="40001-BpAss0-BpSeq0.3-2" n="5" date="2009-09-08T10:14:48.189+03:00">
- <message>
- <![CDATA[ Updated variable "Invoke_fileService_SyncFileReadOperation_InputVariable_1"
]]>
</message>
- <details>
- <![CDATA[
<Invoke_fileService_SyncFileReadOperation_InputVariable_1><part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="Empty"><empty xmlns="http://xmlns.oracle.com/pcbpel/adapter/file/fileReadService/">
            <ns1:input xmlns:ns1="http://xmlns.oracle.com/file2DbProcess">gdfghf</ns1:input>
        </empty>
</part></Invoke_fileService_SyncFileReadOperation_InputVariable_1>
]]>
</details>
</event>
- <event sid="BpSeq0.3" cat="2" type="4" wikey="40001-BpInv0-BpSeq0.3-3" partnerWSDL="fileReadService.wsdl" n="6" date="2009-09-08T10:14:48.439+03:00">
- <message>
- <![CDATA[ Faulted while invoking operation "SyncFileReadOperation" on provider "fileReadService".
]]>
</message>
- <details>
- <![CDATA[
<messages><input><Invoke_fileService_SyncFileReadOperation_InputVariable_1><part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="Empty"><empty xmlns="http://xmlns.oracle.com/pcbpel/adapter/file/fileReadService/">
            <ns1:input xmlns:ns1="http://xmlns.oracle.com/file2DbProcess">gdfghf</ns1:input>
        </empty>
</part></Invoke_fileService_SyncFileReadOperation_InputVariable_1></input><fault><bindingFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="code"><code>null</code>
</part><part name="summary"><summary>file:/C:/OracleBpel/10.1.3.1/OraBPEL_1/bpel/domains/default/tmp/.bpel_file2DbProcess_v2009_09_08__36696_083f54f05823204c42612c5188057cd4.tmp/fileReadService.wsdl [ SyncFileReadOperation_ptt::SyncFileReadOperation(Empty,SampledataCollection) ] - WSIF JCA Execute of operation 'SyncFileReadOperation' failed due to: Error while translating.
Error occured while translating content from file C:\JDeveloperStudio10131\jdev\mywork\inputs\fileRead\csvFileInput.csv [Caused by: Start of root element expected.]
; nested exception is:
     ORABPEL-11008
Error while translating.
Error occured while translating content from file C:\JDeveloperStudio10131\jdev\mywork\inputs\fileRead\csvFileInput.csv [Caused by: Start of root element expected.]
Check the error stack and fix the cause of the error. Contact oracle support if error is not fixable.
</summary>
</part><part name="detail"><detail>null</detail>
</part></bindingFault></fault></messages>
]]>
</details>
</event>
- <event sid="BpSeq0.3" cat="2" type="4" wikey="40001-BpInv0-BpSeq0.3-3" n="7" date="2009-09-08T10:14:48.439+03:00">
- <message>
- <![CDATA[ "{http://schemas.oracle.com/bpel/extension}bindingFault" has been thrown.
]]>
</message>
- <details>
- <![CDATA[
<bindingFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="code"><code>null</code>
</part><part name="summary"><summary>file:/C:/OracleBpel/10.1.3.1/OraBPEL_1/bpel/domains/default/tmp/.bpel_file2DbProcess_v2009_09_08__36696_083f54f05823204c42612c5188057cd4.tmp/fileReadService.wsdl [ SyncFileReadOperation_ptt::SyncFileReadOperation(Empty,SampledataCollection) ] - WSIF JCA Execute of operation 'SyncFileReadOperation' failed due to: Error while translating.
Error occured while translating content from file C:\JDeveloperStudio10131\jdev\mywork\inputs\fileRead\csvFileInput.csv [Caused by: Start of root element expected.]
; nested exception is:
     ORABPEL-11008
Error while translating.
Error occured while translating content from file C:\JDeveloperStudio10131\jdev\mywork\inputs\fileRead\csvFileInput.csv [Caused by: Start of root element expected.]
Check the error stack and fix the cause of the error. Contact oracle support if error is not fixable.
</summary>
</part><part name="detail"><detail>null</detail>
</part></bindingFault>
]]>
</details>
</event>
- <event sid="BpPrc0.1" cat="2" type="4" n="8" date="2009-09-08T10:14:48.439+03:00">
- <message>
- <![CDATA[ "BPELFault" has not been caught by a catch block.
]]>
</message>
</event>
- <event sid="BpPrc0.1" cat="1" type="2" n="9" date="2009-09-08T10:14:48.455+03:00">
- <message>
- <![CDATA[ _cl_
]]>
</message>
</event>
- <event sid="BpSeq0.3" cat="1" type="2" n="10" date="2009-09-08T10:14:48.455+03:00">
- <message>
- <![CDATA[ _cl_
]]>
</message>
</event>
- <event sid="BpPrc0.1" cat="2" type="2" n="11" date="2009-09-08T10:14:48.470+03:00">
- <message>
- <![CDATA[ BPEL process instance "40001" cancelled
]]>
</message>
</event>
</audit-trail>

Error validating tranformation file

Hello all, I am trying to load a Data Package in BPC.
Created a flat file and tranformation file.
When validate the tranformation file I am getting the following error:
Validate has successfully completed
ValidateRecords = YES
Task name CONVERT:
No 1 Round:
Command CATEGORY does not start with *
Error: Validate with data file failed
I don't have a logic activated. I don't understand the error, whare I set the command Category?? this is a domension name instead a command.
Any Idea what am I doing wrong??
Thanks
Sergio

Thanks Pravin.
This is extrange I have tried all the combination for Header and Skip options but allways got the error.
I changed the transformation file as follow :
*OPTIONS
FORMAT = DELIMITED
HEADER = YES
DELIMITER = ;
AMOUNTDECIMALPOINT = .
SKIP = 0
SKIPIF =
VALIDATERECORDS=YES
CREDITPOSITIVE=YES
MAXREJECTCOUNT=
ROUNDAMOUNT=
*MAPPING
Category =*COL(1)
Entity =*COL(2)
P_ACCT =*COL(3)
P_Activity =*COL(4)
P_DataSrc =*COL(5)
RptCurrency =*COL(6)
Time =*COL(7)
Amount =*COL(8)
*CONVERSION
now the error is different:
Validate has successfully completed
ValidateRecords = YES
Task name CONVERT:
No 1 Round:
An exception with the type CX_SY_STRUCT_COMP_NAME occurred, but was neither handled locally, nor declared in a RAISING clause
Component Name '2008.OCT' of the Component 15 Contains an Invalid Character
Error: Validate with data file failed
any idea??
Thanks
Sergio

BICONTENT 7.04 (06) error in Tranformations deleted in version D of DDIC

Hello,
We have a problem
we are patching a SAP NW 7.01 BI system from STACK5 to STACK 8.
But when we come to the BICONTENT 7.04 (06) it gives us an error in the XPRA:
Start of the after-import method RS_DTRF_AFTER_IMPORT for object type(s) DTRF (Delivery Mode)
Transformation 02G7OYG6T94Z3YXXDAVKJZGU96P1Z06G deleted in version D of DDIC
Transformation 069RU1ISGHT2R3RE251XTQ6W7EEI8DTF deleted in version D of DDIC
Transformation 0DNUMPVYA9KSFZR9YSV2MS6B1K1ILPI6 deleted in version D of DDIC
Transformation 0EA977UPZMDUORTBEAIL44Z7JHFCZE77 deleted in version D of DDIC
Transformation 0E0KUUAF8SEFVICKJYC1VBRWXDKI3GU4 deleted in version D of DDIC
Transformation 0F17EQDHR3ZC5YVL9TOPCSPDT6KTE4YS deleted in version D of DDIC
Transformation 0KFZLNW7HO94LVX3GHTOAKW4PBI7IIFE deleted in version D of DDIC
Transformation 0NGSRBMKBCX9RDH1TA19TGRMV6U8XGNU deleted in version D of DDIC
Transformation 03INNGXPRLEIKIXO4UB9P81624Y8FD88 deleted in version D of DDIC
Transformation 04YKJZ7R6PRX6Z9MRGCLI29XJPVEK2GD deleted in version D of DDIC
Transformation 07LZQEFXKORBMBQM3IB2YJFS3NDJDBTR deleted in version D of DDIC
Transformation 07G0HFAS5LBBHDBUL2NDBMHK6QRY6H1D deleted in version D of DDIC
An exception has occurred
We have tried to find this Trsnformations in the Datasource that are active and nothing. It's only in the BI content.
then there's another error:
Start of the after-import method RS_DMPR_AFTER_IMPORT for object type(s) DMPR (Delivery Mode)
Errors occurred during post-handling RS_AFTER_IMPORT_D for DSTD L
RS_AFTER_IMPORT_D belongs to package RS
The errors affect the following components:
BW-WHM (Warehouse Management)
Post-import method RS_AFTER_IMPORT_D completed for DSTD L, date and time: 20110408122026
Can someone help us.
Best Regards.
Pablo Mortera.

I solved my issue. It could be that the actual error is not showing up, in that case implement SAP note 1546842, and re-run the XPRAS_UPG phase. In most of the cases, you can get the error message: "sourcesystem XYZ does not exist". In that case, you should delete the orphaned systems with the procedure detailed in note 1564964.
Hope this helps

Error while loading the data in DSO (Bi 7.0)

Hi Friends,
I am working on BI 7.0 , I had run a DTP to load the data in DSO from another DSO.but there was some error in tranformation because of which DTP request didnt terminate with either green or red . then I fixed the bug in TRX and rerun the request .Now there are two requests. Now i deliberately changed the QM Light of the earlier request to Red so that I could run another request. The other DTP success fully loaded the data in Activation Que of DSO . But when I tried to Activate the second request I got a message that request can not be activated because earlier request is yet to be activated.
now I tried to delete the earlier request .Neither its getting deleted nor am I able to change the QM Light to Green .
What should I do to activate the Successful request to load the data in DSO.
puzzeled !
Anurag

Hi,
I have a similar situation....
I load data from DSO 1 to DSO2....i run the DTP and look at the monitor after its green when i go to manage and activate i am seeing two requests instead of 1...i am not sure why...Can you guys tell me if there is any setting that needs to be taken care of.
Thanks,
Vinay.

I can install or uninstall.

I can't install or unstall Sun's version
j2re-1_4_2_01-windows-i586-iftw
I'm runing windows 2000 professional.
This is the package that's installed by when you go to
www.java.com.
If I try and remove the application using the add/remove programs.
I get the error. "Error applying transforms. Verify that the specified transform paths are valid." If I use the "change" button.
I get the error. "The feature you are trying to use is on a network resource that is unavaiable." Use Feature from: http://java.sun.com/webapps/download/GetFile/1.4.2_01-b06/windows-i586/
this is a dead link on the sun site. so great I cant upgrade or downgrade. I really dont want to have to re-install the os.
Any Ideas?

ERROR APPLYING TRANSFORMS ........(personal solution)
try downloading this from microsoft or use this link.......
http://download.microsoft.com/download/E/9/D/E9D80355-7AB4-45B8-80E8-983A48D5E1BD/msicuu2.exe
launch the clean up utility then select java to uninstall,.....after it has been uninstalled, install java back.. It should work, i had the same dilemma but all cleared up because of this utility.
**I hope java or sun's website have this information as part of the solution to the "error applying tranforms" scenario. It does really work.

Need help froma pro

umm... i have had java for awile and about 1 week ago it just stoped workingon my pc. then i unistalled it and reinstalled it and it worked ofr baout the last week.but abuot 3 housr ago it stoped again na di tryed doing teh un=re thing again nad it didnt work i got a message."error applying transforms,Verify that the specified transfor, paths are valid" ok i got that massage then i went tp java help to fix it and the solution it gave didnt work.can any 1 help?

ERROR APPLYING TRANSFORMS ........(personal solution)
try downloading this from microsoft or use this link.......
http://download.microsoft.com/download/E/9/D/E9D80355-7AB4-45B8-80E8-983A48D5E1BD/msicuu2.exe
launch the clean up utility then select java to uninstall,.....after it has been uninstalled, install java back.. It should work, i had the same dilemma but all cleared up because of this utility.
**I hope java or sun's website have this information as part of the solution to the "error applying tranforms" scenario. It does really work.

Tranformation error

Hi Experts,
I am uploading flat file to DSO...... in transformations while activating I am getting the following error.
"@5C\QError@ Rule (target: 0FISCYEAR, group: 01 Standard Group): Syntax error in routine"
Source CALMONTH and Target Fiiscal year period.
can anybody tell me the reason ...pls help me out regarding the same.
Thnx in advance,

Hi,
I dnt understand the logic Please help me out..if ur help in this regards I will appreciated with points.
    DATA: wa_t009b TYPE t009b,
             i_t009b TYPE TABLE OF t009b,
             l_end_of_period         TYPE dats.
    SELECT *
      FROM t009b
      INto TABLE i_t009b
      WHERE periv = 'V3'.
    IF sy-subrc eq 0.
      CLEAR wa_t009b.
      READ TABLE i_t009b INTO wa_t009b
                         WITH KEY bumon = SOURCE_FIELDS-CALMONTH+4(2).
      IF sy-subrc eq 0.
        RESULT0(4) = SOURCE_FIELDS-CALMONTH0(4) + wa_t009b-reljr.
        RESULT+4(3) = wa_t009b-poper.
      ENDIF.
    ENDIF.
ENDMETHOD.                    "invert_0FISCPER
ENDCLASS.                    "routine IMPLEMENTATION
Thnx in advance,

Error in using S/A Bridge in ccBPM

Hi all,
I am trying a BPM using S/A bridge in ccBPM.
The receive step(start process) is using a synchronous interface which opens the S/A bridge.
The scenario is Http<->BPM, where the response must go back from BPM.
But when tested it showing the following error
<SAP:Error>
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">UNKNOWN_MESSAGE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No object type found for this message; check the activation of the corresponding process</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
It is showing some activation error. But every thing is activated.
Can anyone help.
Thanks in advance.
Chemmanz

Hi all,
Thank you for your quick response.
There are no semantic errors in BPM.
Also it is having return code 0 in SXI_CACHE.
What is SWCV BASIS ??
I am doing a simple test scenario with
Data Types.
1)DT_NUMBERS
   <REQUEST>
   <NUMBERS>
   <A>
   <B>
2)DT_SUM
<RESPONSE>
<SUM>
Message Types
1.MT_NUMBERS
2.MT_SUM
Following message interfaces
1.MIOS_NUM_SUM outbound synchronous
Request Message - MT_NUMBERS
Response Message - MT_SUM
2.MIAS_NUM_SUM abstract synchronous
Request Message - MT_NUMBERS
Response Message - MT_SUM
3.MIAA_NUM abstract asynchronous
Message - MT_NUMBERS
4.MIAA_SUM abstract asynchronous
Message - MT_SUM
Message Mapping
MT_NUMBERS<->MT_SUM for finding the sum
BPM Steps - (SA_BPM)
1.Receive Step
Message -> MIAA_NUM
Synchronous Interface -> MIOS_NUM_SUM
Opens S/A Bridge
2.Tranformation Step
For finding sum
MIAA_NUM to MIAA_SUM
3.Send step
Message -> MIAA_SUM
Closes the S/A Bridge
In the configuration
1.I am using plainadapter
2.Receiver Determination is
HttpService(BusinessService)(MIOS_NUM_SUM)->SA_BPM(BPM)(MIAS_NUM_SUM)
Any thing wrong ??
Thanks in advance
Chemmanz

Error while creating transformation from DSO to InfoCube

Hi Gurus,
When i am creating tranformation from DSO to InfoCube getting an error, " The unit/currency 'Source Currency 0CURRENCY ' with the value 'space' is assigned to the key figure 'Source Key Fig. ZAMT_PLC ' with the value
'8.50 ' "
ZAMT_PLC is created with 0CURRENCY.
On checking we found that there is no value stored for Currency field in table level itself. Now in this case how do we avoid this error.
I want to know why is this we need to have value for 0Currency field???
Thanks & Regards,
Anup

Hello Anup,
If you load a key figure which has a unit assigned to it,
then for every records where the key figure has a valid value
(value 0) the corresponding unit has to be delivered as well.
Additionally please check note 1366474 regarding the RSTRAN 312
error message:
"The corrections contained in Note 1165168 are incomplete.
Depending on the sequence during loading, the system may not issue error
message RSTRAN 312 even though data regarding the assigned unit or
currency "space" is incorrect."
This means actually, that the system should have issued the RSTRAN312
error message even before the upgrade, but for some reason this
check found no issues in some constellations. This means furthermore
that your system behaved incorrectly in the past, that this
error message was not triggered if you loaded key figures without
any unit.
I'm sorry to tell you, but the system behaves and works as designed
as it should be even before the correction from note 1366474.
Please change your transformations for key figures which
have a unit assigned, that the unit field is filled correctly.
with the corresponding units, otherwise the system will abort
the processing of the data with the above mentioned error
message.
Best Regards,
Des

Error while activating transforamtion

Hi,
Facing error while activating the transformation
Error is
: No source parameter is used.
No target field is assigned.
We are getting the data from the flat file, i had tried assiging the fields in the transformation.
but those are the amount fileds. source is comming as 17 in length but in bi it is taking 9 as length.
I had made infoobject assignment in the tranformation but it is showing the same error.
With regards,
Vamsi

Hi Vamsi,
In the datasource,fields tab please check if the format field in set to external.
Try creating the transformation again after assigning the source field.
Hope this answered you.
-Vikram

Error while activating 2LIS_13_VDITM

Hi All,
I have activated the 3.x datasource for 2LIS_13_VDITM from T Code RSDS , activated the infosource etc from the business content. It is fine till here.Now when i try to migrate the data source to 7 flow, it is throwing an error " Internal error occured during generation of Transformation".
The screen is getting exited at this point without allowing me to have a look at the transfornations. I have checke if this because of 0CRM_product not being mapped properly and it has nothing to do with it. Could you please suggest the solution for this error,
Thanks and Regards,
Sasidhar Gunturu

Hi Sasidhar.
Before creating the tranformations why dont you migrate the Datasource?
My case also i have these kind of errors in SD.
You just Migrate the exisitng datasource from bw3.5 to BI7.0 first.
Then install the cube from businees content,
Now create the tranformation for the same,,,,
Later you need to write the routines as well....
It will work
Regards
Srini

Error while transporting transformations and datasource Urgent need Help

Hi all,
I have been working on this problem for a few days now. I created an ODS object, transformations, DTP and I am using a R/3 datasource for extraction. The ODS populates fine in the Dev box, the tranformations and the datasource are fine only in the Dev box. I tried to tranport the objects to the QA box from the Dev Box. Only the ODS transports properly. The transformations are not transported at all. Here is the error I get:
Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)
No rule exists
Rule 1 of transformation   () is not valid and is being deleted
Rule 2 of transformation   () is not valid and is being deleted
Error occurred during post-handling RS_After_import for TRFN L
Ended with return code : ==> 8 <===
Please do let me know what could be the problem. Please do respond ASAP......
if you experienced this issue please let me know how you solved it or a possible work around. any help will be greatly appreciated....
So far we have been using only 3.5 objects. This is the first 7.0 (end to End) transport.

Hi voodi,
I just followed the exact sequence that you mentioned. I transported the
DataSource first....then ODS(write optimized)....then transformations....then Dtp & infopackage.
data source ... no errors
2) ODS ..... no errors
3) Transformations .... Error....same as mentioned in my earlier post....
4) DTP and Infopackage ....Error similar to whats mentioned ...and it says that transformation does not exist.
Could it be an issue with Source System Translation ..... I dont know much about it .....could you please tell me what it could be and how to resolve it.   I am thinking in these lines because the source system in QA3 exists in the Data Souces Folder and it has translated properly to QA3Client300. But under the Infoproviders folder (in Q03)...under my DSO the data source still shows Dev3Client 200(client not changed). If this is the issue do you think I need to talk to Basis support for asking them to modify the transport(internally)......can it be done....
please do give me your feedback....thank you.

Adobe Acrobat 9.3.4 Update failure- "Error Applying Transforms, verify that the specified...

I have ignored this issue for long enough. I have Adobe CS4, with Acrobat Pro version 9.3.4. Windows 7. Acrobat updater pops up on my machine, and when I execute the update requested, the updater gives me the update failure message, with code 1604, "error applying transforms."
I have seen solutions posted for this tranforms message, but it was a problem with Acrobat 8. I have seen no solutions as of yet for Acrobat 9, so I thought I would post.
I also tried opening Acrobat 9 Pro, and under the help tab, I initiated "repair". I get the same transform error message as above. Any advice anyone? Should I just uninstall Acrobat 9 Pro and reinstall using my CS4 disk?
Thanks for the help!

If you have original CD with Acrobat installation, copy all files with extension .mst from this CD to the following location:
C:\Program Files (x86)\Adobe\Acrobat 9.0\Setup Files\[ProductCode] if this is 64bit system
or
C:\Program Files\Acrobat 9.0\Setup Files\[ProductCode] if this is 32bit system
where [ProductCode] is a unique value which identifies your language version of Acrobat 9 Pro.
If this is EFG version, it should be {AC76BA86-1033-F400-7760-000000000004}
If location does not exist, create it.
2. If you do not have original CD and cannot find .mst files, provide the exact Product name including language and I will provide further instructions.
Good luck

Error in ODS data load

Hi,
I am trying to load data to ODS from CSV file but one of the field is not getting updated.
Although, that field has data in PSA. Why is it happening???

Hi,
Is the request loaded without errors to the ODS? Check the mapping for the field in the update rules, if you are doing it in 3.x or check the Tranformations.
Hope it helps.
Veerendra.

Error in tranformation

Similar Messages

Maybe you are looking for