Error in Transaction Calculation
Hi All
Iam working on OIC (Oracle Incentive Compensation) setup.
While Iam trying to Submitting a Transaction calculation
(OIC->Compensation SuperUser->Transaction->Calculate->create Batch) in OIC . It is asking for synchronizing the ruleset.
when Iam trying to synchronizing the ruleset, the installation is not completed, it is showing status 'install pending '.
How to complete the synchronization of ruleset process.
If ruleset is synchronized successfully then only I can able to
Submit a Transaction calculation.
please anyone help me.
Thanx in advance.
Regards,
Bhaskar Reddy
HI,
If you have any of your assets, those having values in 04 area, then it is not at all advisable to deactivate the dep area.
Once the values in 04 area will become 0, then do as desired.
So far, this is the only solution for your case.
Regards,
Srinu
Similar Messages
-
Error in activating Calculation view
Hi Gurus,
Please help me in resolving this issue below as I get an error when activating calculation view.
Internal deployment of object failed;Repository: Encountered an error in repository runtime extension;Internal Error:Unable to create hierarchy view: CREATE COLUMN VIEW
SQL: transaction rolled back by an internal error: identifier is too long: the identifer
description" is too long. Maximum length is 127:
I have checked all content related to this error but not able to find a solution.
Please adviseThough your calc view name could be small, the 'fully qualified' calculation view name could be bigger than 127 character.
Fully Qualified name = <packagename.packagename.packagename.....>/<calc view name>
For each calc view that you activate, HANA internally creates more than one column views (based on your attributes) which are found under the _SYS_BIC schema and there it will fail if the column view name is exceeding 127 characters.
Solution: make sure the fully qualified name is not too big
Regards,
Sesh -
Hello Gurus,
I have a couple of calculation views in HANA and each of them has text fields (like Employee Name, Country Name etc.).
As part of my project requirement, I have join those two views and get all the fields that exist in them.
When I am doing so, I am getting a weird error as shown below.
Error: [129]: transaction rolled back by an internal error: [129] transaction rolled back by an internal error: exception 141000274: exception 141000274:
TRexUtils/ParallelDispatcher.cpp:275
message not found; $message$='TSR HTKD JFSDFM'
Please check lines: 59,
Upon, researching further, I could see that the value 'TSR HTKD JFSDFM' is the value in text field of Employee Name.
I did try to increase the length of the field and change the data types but nothing has worked.
Could you please help me in getting this one resolved.
Thanks,
RavitejaHi,
I am exactly facing the same issue:
Error: [129]: transaction rolled back by an internal error: [129] transaction rolled back by an internal error: exception 141000274:
But i found a fix :-) .....
This may be a very late reply but it would help people who desperately searching for an answer for this issue.
I used CAST function .. The problem is, we are selecting data from table and of course we dont know the size of the data (attribute) @ runtime. We assign the length by looking at the table attr length or view op attr length. But what happens is the junk data which exceeds the limit of the allocated space hence we get this error.
So i used CAST function to truncate the excess junk values (may be spaces).
Example:
I have a ATTR view of date in the format YYYY-MM-DD which means 10 char size.
In my CALC view I have created date OP column of VARCHAR(10) but I get the above error for no reason. Eventhoug i am 100% sure about my ATTR date would be max of 10 char my CALC view is failing @ runtime.
So i did a CAST on date as CAST(my_date as varchar(10)) and the magic happend. It works .......
But you need to be careful in using this because if you use CAST you may lose data. Careful. In my case i dont.
Somebody from HANA team should look at this issue from SAP and solve this. I am sure it is a serious bug from HANA (eventhough i am using SAP HANA SP09 Rev 92 the most latest as of today !!!!!!!!!! )
Enjoy....
Thanks & Regards
Prakash K -
Fixed Assets - Depreciation Run - Error -10 (Transaction Without Amount)
Fixed Assets - 2007A 8.00.00.07 Depreciation Run.
Error
"The depreciation run 100000004 failed and has been cancelled.
Error -10 (Transaction Without Amount).
Cannot work out what is causing this.Hi,
Check your selection criteria once again. From your error message I can presume that you have mentioned about your original amount for calculating depreciation value.
Check have u missed any field which related to amount.
M. Senthil -
Error committing transaction in Stored Proc call - prev solns not working
Hi All,
Our process invokes a DB adapter to fetch the response from the table for our request via Stored Procedure call but facing the below issue. Its a synchronous process. Stored Procedure is present inside the Package and we are calling the Stored procedure using that Package.
What we did is created a DB datasource of XA type and tried to call the Stored Proc but it was giving a problem “ORA-24777: use of non-migratable database link not allowed” and hence according to this thread Using DB links in Stored proc call in DB adapter 11G SOA we have modified the datasource as non-XA type.
While we do that, we could see that Stored Proc is called and the response is present in the reply payload inside the flow trace. But the instance is getting faulted and the error is “Error committing transaction:; nested exception is: javax.transaction.xa.XAException: JDBC driver does not support XA, hence cannot be a participant in two-phase commit. To force this participation, set the GlobalTransactionsProtocol attribute to LoggingLastResource (recommended) or EmulateTwoPhaseCommit for the Data Source.”
We have tried the properties of global transaction support as one phase commit, emulate two phase commit and logging last resource but error remains the same.
Database from which we are getting the response is of version "Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production". Will the database link error arises even if we connect to Oracle Database?
Please could you advise me solutions to resolve this issue.
Thanks in advance.You are using Non-XA because it means (among all others) that the commit issue can be handle by the DB as well.
The Emulate Two Phase property imitating the XA transaction in that way, that it allows you to manage a local db transaction.
You can stay with XA connection, but then you will have to use "AUTONOMOUS_TRANSACTION pragma" in your procedure.
Enter the following link to find good explanation about all of your questions:
http://docs.oracle.com/cd/E15523_01/integration.1111/e10231/adptr_db.htm#BGBIHCIJ
Arik -
Hi Folks,
In System logs, daily I am encountering the message as "Error in transaction data".
The messages are listed in SM21 in sequence as -
Error processing batch input session PMFMASSIGN
> Queue ID: 07011706105177351507
> Transaction no. 1, block no. 1
> Error in transaction data
On more detailed analysis, after drilling further through each message I found the following message relevant -
Documentation for system log message D2 0 :
Entry relating to an error during the processing of a batch input session. In the batch input session the data for the next transaction is requested. However, the data read is no transaction data. The session has probably been destroyed in the database.
Please explain as why the issue is occuring. I remember some time back, I executed RSBTCDEL2 on Production to clear invalid batch sessions but had to terminate due to long run.
Kindly help me fix this.
Regards,
NickOne interesting discovery I just found in R/3, was this job log with respect to the above process chain:
it says that the job was cancelled in R/3 because the material ledger currencies were changed.
the process chain is for inventory management and the data load process that get cancelled are for the job gets cancelled in the source system:
1. Material Valuation: period ending inventories
2. Material Valuation: prices
The performance assistant says this but I am not sure how far can I work on the R/3 side to rectify this:
Material ledger currencies were changed
Diagnosis
The currencies currently set for the material ledger and the currency types set for valuation area 6205 differ from those set at conversion of the data (production startup).
System Response
The system does not allow you to post transactions after changing the currency settings to ensure consistency.
Procedure
Replace the current settings with the those entered at production
start-up.
If you wish to change the currency settings, you must use programs to convert data from the old to the new currencies.
Inform your system administrator
Anyone knowledgable in this area please give your inputs.
- DB -
Error In Transaction F-44 for Foreign Vendor Payment
Hi Experts,
User is getting the Error In Transaction F-44 (G/L account 14281001 xxxx does not exit) while doing Vendor Payment to Foreign Vendors.
When I checked in Vendor Master Data, Reconcilliation account is maintained for all Foreign(other) & Foreign(Intercompany) Vendors.
The GL 14281001 is maintain in the account determination configuration for other Foreign Vendors.
User is getting this Error After successful FF67 transaction Process.
Please advice.Hi Amitash,
GL is created @ COA level & not mark for deletion. This GL is not created in Company code. I discussed with user she was saying
F-44 transaction is booked a realized gain/loss while a foreign vendor invoice clearing vs payment. Normally this realized gain/loss must be booked directly to the foreign vendor account which is linked to GL XXXXXXXX for all IC foreign vendors and linked to GL YYYYYYYY for all other foreign vendors .
It will be not correct to book a foreign vendor realized gain/loss to a separate account therefore a new GL 14281001 should not be created in comp code XXXX, instead of incorrect GL14281001 SAP must select either GL XXXXXXXX for IC foreign vendors or GL YYYYYYYY for all other foreign vendors. -
Error in transaction SOAMANAGER from Dev ECC6
Hi,
I am getting below error in transaction SOAMANAGER -- Application & scenario comm -- single service admin -- select service Z* -- apply selection -- Open Web Service navigator for selected binding then getting error as below:
Error:
Cannot download WSDL from http://<host>:8010/sap/bc/srt/wsdl/bndg_DF5CDA3549E109F1A9D000145E7A77A0/wsdl11/allinone/ws_policy/document?sap-client=010: It is not allowed to access this service. If you believe you should be able to, please contact your system administrator
I appreciate if you could help me in this.
- PankajHi Pankaj,
This error message is caused by security considerations. The WS Navigator can access only web services which are deployed on the local engine. To allow the WS Navigator to access an external hosts, you have to add
these hosts, to the WS Navigator white list. The white list is a list hosts which the WS Navigator should be able to access.
Please refer to this link, which describes where the white lists are maintained in the visual administrator: http://help.sap.com/saphelp_nw04/helpdata/en/7c/f257422d095542e10000000a1550b0/content.htm
When configuring the white lists one can use wild card. For instance. If a web service deployed on www.sap.com should be accesseed by the WS Navigator, then the the white list should contain *.sap.com. The whitelist can contain more then one host, in that case they should be separated by an comma or semi-column.
Hope this can fix your issue.
Regards,
Blanca -
LSMW - Error BDC_INSERT, Transaction code .. is invalid XD01
Dear all.
I have done the following Steps:
1 - Maintain Object Attributes. Chose the Object type Batch Recording, then created a Record using the name (CLI_PMR). And created the Batch record and then assign the fields name.
2 - Maintain Source Structures Created the Struture (CLI_PMR1)
3 - Maintain Source Fields Assign the fields name and length that I used in my program. (CLI_PMR1).
4 - Maintain Structure Relations Assign the Struture (CLI_PMR1 to CLI_PMR)
5 - Maintain Field Mapping and Conversion Rules The normal thing in this point.
6 - Specify Files - Specified the Legacy Data, path for the file.
7 - Generate Read Program Generated the Program.
8 Read Data Executed this Step and every thing is correct
9 - Generate Conversion Program Generated the program
10 - Convert Data Convert data
11 - Display Converted Data Every thing is fine, with no errors
12 - Create Batch Input Session- At this the error message appears Error BDC_INSERT, Transaction code .. is invalid time.
At the time we have created other LSMW programs for this T-Code and every thing is OK.
I'm using the T-CODE=XD01
Best Regards
Pedro Miguel RodriguesHi, I had the same problem in LSMW when generating a batch input for trx IE01. The cause was that there were tab/newline-characters in my text file (some descriptions contained tab-characters). Since I used a tab delimited file, these tabs/newlines in the fields messed up my file.
The excel file contained multiple lines per cell in some description fields. When this was exported to tab delimited text, it contained additional tabs. After checking the contents and removing the tabs/newlines from Excel and performed a new export to txt-file, it was solved.
Best regards,
Jan-Peter Molenaar
SAP EAM Consultant -
Error as no calculation procedure assigned to company code
Dear Member,
I am SAP hr Fresher, Im practising in IDES,
When i create Personal Area iam getting
Error as no calculation procedure assigned to company code???
What should i do???????
Help me out experts.......
Thanks
JosePlease execute t-code OX02 and assign your company code to the country in which it exists.
Hope this helps, -
BDC - How we can identify errors in Transaction method?.
Hi ,
How we can identify errors in Transaction method?.
Regards
Nikhil V KumarHI
CALL TRANSACTION 'FK01' USING IT_BDCDATA MODE 'A'
UPDATE 'S'
MESSAGES INTO IT_MESSAGES.
IF SY-SUBRC <> 0.
PERFORM FORMAT_MESSAGES.
form FORMAT_MESSAGES .
DATA: L_MSG(100).
LOOP AT IT_MESSAGES.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
ID = IT_MESSAGES-MSGID
LANG = SY-LANGU
NO = IT_MESSAGES-MSGNR
V1 = IT_MESSAGES-MSGV1
V2 = IT_MESSAGES-MSGV2
V3 = IT_MESSAGES-MSGV3
V4 = IT_MESSAGES-MSGV4
IMPORTING
MSG = L_MSG
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2
write:/ l_msg.
endloop.
endform. " FORMAT_MESSAGES
HOPE THIS HELPS,
PRIYA. -
Error in cost calculation for production order
Dear All,
I got error of cost calculation while release of Production Order due to price of some material is not mantain .
What will happen if I release , save the Order with error & do Good Issue ???
IshwarDear Ishwar,
Check the log's created for costing and rectify the same.
I feel its better to rectify the cost related errors and then release the production order and proceed to Good's Issue.
Check whether there is a MAP for all the Raw-materials and an origin group in costing 1 view.
The Finished product must be having a standard cost estimate that's valid for the current period.
Revert back in case of any more help needed.
Regards
Mangalraj.S -
Error 131 Transaction rolled back by lock wait timeout
Hello all,
I was trying to run apriori, and then HANA writer in my database.
Apriori executes directly, and then I configure and try to execute HANA Writer. But it keeps executing for more than half an hour, and then gives the following error: Error 131 Transaction rolled back by lock wait timeout. Lock timeout occurs while waiting TABLE_LOCK of mode EXCLUSIVE.
Bimal suggested me to reduce the data to be analysed, so then I reduced it to a pretty small part and executed again.
It gave me the same error after more than 30 minutes waiting executing.
after having this error, I tried just execute apriori, but with a filter of 5 transactions and than it worked. After that I tried to visualize the results, and got the following error:
It means that my HANA memory is full?
I got the view from HANA:
Regards!
Error 131 Transaction rolled back by lock wait timeoutHi Jurgen,
I'm a developper for PAL from Shanghai team.
Could you please provide some details information about this case:
- How many records did you use ?
- What’s the value of “MIN_SUPPORT” and “MIN_CONFIDENCE” did you use ?
The algorithm of apriori will consume much memory when the input data is very large and min_support is low.
So I suggest you set “MIN_SUPPORT” and “MIN_CONFIDENCE” as 0.9 firstly, check if it can output result.
Thanks,
Peng -
Syntax Error in Transaction /nswo1
Hi CRM Experts,
I am finding Syntax error in Transaction /nswo1. Syntax error is:
program %_JJ_TESTFRAME_OBJTYPE
"CRMS_ERMS_STRING" must be flat structure. you cannot use internal
tables, strings,references or structures as compnents.
Please help me.
Thanks in advance
Thanks,
Rony.Hi Shiva ,
U have to check If there is any Inactive Objects in that program of PA30 ?.Try to Activate all Objects which has modified IN SPAU.
Regards
Prabhu -
Hi,
The following exception occurs, when the workflow was waiting after it has made
a synchronous call to an external system through WTC Interface.
I had read Rob's comments earlier for WLI 6.1 SP1 on this exception that there
would be a fix available for it in the next minor release. For your information,
I had got this exception in WLI 6.1 SP3. Is still EJB Container's timeout excels
the JTA's timeout? Can anybody help me out to find a fix for this problem?
Thanks in Advance,
Regards
Jegadeesan.
The Stack Trace is given below :
<Error marking transaction for rollback: java.lang.IllegalStateException: Cannot
mark the transaction for rollback. xid=4362:5b4c62b47adcc632, status=Rolled back.
[Reason=weblogic.transaction.internal.TimedOutException: Transaction timed out
after 31 seconds
Xid=4362:5b4c62b47adcc632(6932052),Status=Active,numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds
since begin=31,seconds left=30,ServerResourceInfo[weblogic.jdbc.jts.Connection]=(state=ended,assigned=none),SCInfo[ecwli001+admin_ecwli001]=(state=active),properties=({weblogic.jdbc=t3://147.149.116.70:50101}),OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=admin_ecwli001+147.149.116.70:50101+ecwli001+,
Resources={})],CoordinatorURL=admin_ecwli001+147.149.116.70:50101+ecwli001+)]>
java.lang.IllegalStateException: Cannot mark the transaction for rollback. xid=4362:5b4c62b47adcc632,
status=Rolled back. [Reason=weblogic.transaction.internal.TimedOutException: Transaction
timed out after 31 seconds
Xid=4362:5b4c62b47adcc632(6932052),Status=Active,numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds
since begin=31,seconds left=30,ServerResourceInfo[weblogic.jdbc.jts.Connection]=(state=ended,assigned=none),SCInfo[ecwli001+admin_ecwli001]=(state=active),properties=({weblogic.jdbc=t3://147.149.116.70:50101}),OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=admin_ecwli001+147.149.116.70:50101+ecwli001+,
Resources={})],CoordinatorURL=admin_ecwli001+147.149.116.70:50101+ecwli001+)]
at weblogic.transaction.internal.TransactionImpl.throwIllegalStateException(TransactionImpl.java:1492)
at weblogic.transaction.internal.TransactionImpl.setRollbackOnly(TransactionImpl.java:466)
at weblogic.ejb20.manager.BaseEJBManager.handleSystemException(BaseEJBManager.java:255)
at weblogic.ejb20.manager.BaseEJBManager.setupTxListener(BaseEJBManager.java:215)
at weblogic.ejb20.manager.StatelessManager.preInvoke(StatelessManager.java:153)
at weblogic.ejb20.internal.BaseEJBObject.preInvoke(BaseEJBObject.java:124)
at weblogic.ejb20.internal.StatelessEJBObject.preInvoke(StatelessEJBObject.java:63)
at com.bea.wlpi.server.principal.WLPIPrincipalBean_u7lmf4_EOImpl.getOrganizationInfo(WLPIPrincipalBean_u7lmf4_EOImpl.java:463)
at com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean.getBusinessCalendarProcessor(Unknown
Source)
at com.bea.wlpi.server.workflow.Timer.dateAdd(Unknown Source)
at com.bea.wlpi.server.workflow.action.ActionTimedEvent.getScheduleTimestamp(Unknown
Source)
at com.bea.wlpi.server.workflow.action.ActionTimedEvent.execute(Unknown Source)
at com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean.executeActions(Unknown
Source)
at com.bea.wlpi.server.workflow.Task.executeActions(Unknown Source)
at com.bea.wlpi.server.workflow.Task.activate(Unknown Source)
at com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean.activateSuccessors(Unknown
Source)
at com.bea.wlpi.server.workflow.Decision.activate(Unknown Source)
at com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean.activateSuccessors(Unknown
Source)
at com.bea.wlpi.server.workflow.Decision.activate(Unknown Source)
at com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean.activateSuccessors(Unknown
Source)
at com.bea.wlpi.server.workflow.Task.markDone(Unknown Source)
at com.bea.wlpi.server.workflow.action.ActionTaskDone.execute(Unknown Source)
at com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean.executeActions(Unknown
Source)
at com.bea.wlpi.server.workflow.Task.executeActions(Unknown Source)
at com.bea.wlpi.server.workflow.Task.activate(Unknown Source)
at com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean.activateSuccessors(Unknown
Source)
at com.bea.wlpi.server.workflow.Task.markDone(Unknown Source)
at com.bea.wlpi.server.workflow.action.ActionTaskDone.execute(Unknown Source)
at com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean.executeActions(Unknown
Source)
at com.bea.wlpi.server.workflow.Task.executeActions(Unknown Source)
at com.bea.wlpi.server.workflow.Task.activate(Unknown Source)
at com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean.activateSuccessors(Unknown
Source)
at com.bea.wlpi.server.workflow.Task.markDone(Unknown Source)
at com.bea.wlpi.server.workflow.action.ActionTaskDone.execute(Unknown Source)
at com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean.executeActions(Unknown
Source)
at com.bea.wlpi.server.workflow.Task.executeActions(Unknown Source)
at com.bea.wlpi.server.workflow.Task.activate(Unknown Source)
at com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean.activateSuccessors(Unknown
Source)
at com.bea.wlpi.server.workflow.Task.markDone(Unknown Source)
at com.bea.wlpi.server.workflow.action.ActionTaskDone.execute(Unknown Source)
at com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean.executeActions(Unknown
Source)
at com.bea.wlpi.server.workflow.Task.executeActions(Unknown Source)
at com.bea.wlpi.server.workflow.Task.activate(Unknown Source)
at com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean.activateSuccessors(Unknown
Source)
at com.bea.wlpi.server.workflow.Start.activate(Unknown Source)
at com.bea.wlpi.server.workflow.Workflow.start(Unknown Source)
at com.bea.wlpi.server.workflow.Workflow.instantiate(Unknown Source)
at com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean$1.invoke(Unknown
Source)
at com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean.performWithErrorHandling(Unknown
Source)
at com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean.instantiate(Unknown
Source)
at com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean_h7kt4j_EOImpl.instantiate(WorkflowProcessorBean_h7kt4j_EOImpl.java:692)
at com.bea.wlpi.server.eventprocessor.EventProcessor.checkTrigger(Unknown Source)
at com.bea.wlpi.server.eventprocessor.EventProcessor.onEvent(Unknown Source)
at com.bea.wlpi.server.eventlistener.EventListenerBean.onMessage(Unknown Source)
at weblogic.ejb20.internal.MDListener.execute(MDListener.java:262)
at weblogic.ejb20.internal.MDListener.onMessage(MDListener.java:214)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:1865)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:1819)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)You could change the transaction timeout value, but I'd re-examine the
application and see if the transaction times could be reduced some.
29 seconds seems like a long time.
Maybe you are looking for
-
How do I sink two iPhones to one itunes account
Is it possible to sink a 3G iPhone my wife now has and my older 2G iPhone to the same computer laptop using one itunes account. I would like to be able to put different applications on each iPhone. I did lose some notes thinking I could delete from m
-
Solution to "Quicktime Plug-in failed to load" error
My solution to "Plug-in failed to load" error message when attempting to watch demo movie on Apple website (and others): I found two Quick-time plugin.plugin files in my Internet Plug-ins folder in my User Library folder. One was version 6.3 and one
-
Handling loop exception in an anonymous block
hI , I have a an anonymous block declare cursor local variables begin open cursor some statements loop some statement ; some othet statement; select something from sometablein local variable where some field = cursor.value ; some more statements end
-
Is join field value does not work for Custom object 4 to 15
Hi Everybody I have Custom object 7 as Related Information to campaign object. I want to pull data from campaign to Custom Object 7. I tried with join field value function, but i am getting error. Is Custom object 4 to Custom Object 15 not exposed wi
-
Please help! I am trying to connect my phone to itunes via computer and for some reason it is not being picked up this has only happened after i recently updated itunes any advice on how to connect it? when i authorise my phone to it, it says it is a