Error in transaction forein exchange purchase

Good evening.
I am created one transaction of foreing exchande purchased for USD 1.000.000. The transaction used is TX01. When I save the transaction the system display next message:
FTR_TRD012. Recording position management: Error during distribution 1000
TPM_TRL052. TRL initialization for MM, FX, Derivatives, co. code 1000, valn area 002 is not yet complete
Please, your help. Thanks.
Mario Gallego.

Ok. In the customizing I lack run TPM_INITIALIZE. This arrange the problem. Thanks.

Similar Messages

Standalone Scenario - Error during Creation of Local Purchase Order

Hi All,
I am trying to setup Standalone Scenario, i have created all the master data locally, i am able to Order SC, but after workflow approval SC goes into error 'Error during creation of local purchase order from shopping cart XXXXXXXXX'
I have created following configuration setting for local PO number
1) In SPRO -> Cross-Application Basic Settings -> Number Ranges -> Define Number rang. for Schopping Carts and Follow-on Doc. --- i have number ranges for PO follow-on doc. i.e.
inrerval No = PO, from number = 0004000000, to number = 0004999999, ext. = unchecked
2) In SPRO -> Cross-Application Basic Settings -> Number Ranges -> Define Ranges per backend system for follow-on documents PO, PR etc
3) In sourcing (SPRO -> Cross-Application Basic Settings -> Sourcing -> Define Interactive Sourcing for product categories) --- sourcing is never carried out.
Can anybody help?
Regards,
SAP Guy.
Edited by: SAP Guy on Apr 23, 2008 2:32 AM

Hi SAP Guy,
Following steps are must for Local number range
1) Create number range for local PO
2) Maintain your logical system in 'Define number range per backend system for follow on document'
3) Define Transaction Type for BUS2201, define document type (e.g. EC1)
4) Assign Document type (EC1) in Org attribute BSA.
Hope this helps.
Regards,
Manish.

Error-"There is still a purchase requisition commitment for ORD #########."

Hello All,
I am trying to set deletion flag an internal order using transaction KO02 and am receiving an error "There is still a purchase requisition commitment for ORD #########."
1> What does this mean.
2> How can I solve this problem
Moosa

Hello Moosa,
When you want to close an order, the system checks for dependanting data
to alert you that there are open items that have not been received, etc.
You need to close the purchase orders and requisitions so that the order is no longer "expecting" postings from these dependant objects.
Please consider running the following reports which have been known to correct inconsistencies in commitments:
Report RKANBU01 resets commitments on orders and ranges of orders.
(See note 100409) (Note 125266)
Reports ZKAOIDE0 & ZKAOIDE1 removes commitments which refer to purchase orders and purchase requistions which do not exist.
(See ANote 100409)
Report RKACOR04 corrects mistakes between total and line items in
database tables. (See Note 113423)
I would recommend implementing these programs in a test system first.
You may also want to consider Notes 152571 & 157369 if you are receiving error messages KO447 and/or KO448 when attempting to delete/close the order.
Best Regards,
Gladys xing

Re: Error in submitting Import Standard Purchase orders from Pl/Sql

Hi All,
Iam using the following code to submit a concurret program
"Import Standard Purchase orders" from pl/sql
Program is sucessfully submittted but it is Completing in error status i am stuck there please help me in resolving this
My instance R12
My Code
======
DECLARE
v_request_id VARCHAR2 (100);
BEGIN
mo_global.set_policy_context ('S', 204); --org_id for the operating unit which the purchase order records belong too
mo_global.init ('PO'); -- sets the application
FND_GLOBAL.APPS_INITIALIZE (1013436, 50578, 201); --Consists of the user_id, responsibility_id, responsibility_application_id which is 201 for purchasing
v_request_id :=
fnd_request.submit_request (application => 'PO',
program => 'POXPOPDOI',
description => NULL,
start_time => NULL, -- To start immediately
sub_request => FALSE,
argument1 => '31348', -- Buyer_ID
argument2 => 'STANDARD', -- Doc Type
argument3 => '', -- doc subtype
argument4 => 'N', -- update items
argument5 => '', -- create sourcing rules not used
argument6 => 'INCOMPLETE', -- Approval status
argument7 => '', -- release generation method
argument8 => '1021387', -- batch_id
argument9 => '', -- operating unit null
argument10 => '', -- global agreement null
argument11 => '', -- enable sourcing null
argument12 => '', -- sourcing level null
argument13 => '', -- inv org enabled null
argument14 => '' -- inv org null
DBMS_OUTPUT.put_line ('Request submitted. ID = ' || v_request_id);
COMMIT;
EXCEPTION
WHEN OTHERS
THEN
DBMS_OUTPUT.put_line (
'Request set submission failed - unknown error: ' || SQLERRM
END;
output
=====
when i check output i am getting the follwing error
DECLARE
ERROR at line 1:
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at line 133
Log message
==========
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
31348
STANDARD
N
INCOMPLETE
1021387
Start of log messages from FND_FILE
To get the log messages for PDOI, please use the following id to query against FND_LOG_MESSAGES table:
AUDSID = 945297
ORA-01403: no data found in Package po.plsql.PO_PDOI_PVT. Procedure init_sys_parameters.0
ORA-01403: no data found in Package po.plsql.PO_PDOI_PVT. Procedure init_startup_values.10
ORA-01403: no data found in Package po.plsql.PO_PDOI_PVT. Procedure start_process.50
User-Defined Exception in Package po.plsql.PO_PDOI_Concurrent. Procedure POXPDOI.30
End of log messages from FND_FILE
Thanks
Manoj kumar

Pass NULL instead of ''
Check the flag
SELECT multi_org_category
FROM fnd_concurrent_programs
WHERE concurrent_program_name = 'POXPOPDOI'Update it as per the below MOS Doc
R12 / POXPOPDOI - 'ORA-01422' Error While Running 'Import Standard Purchase Orders' [ID 457628.1]
Otherwise,
Follow the below doc and insert values to the interface tables (headers, lines and distribution) and run the Import Standard Purchase Orders from the front end.
How To Diagnose Problems With Importing Standard Purchase Orders [ID 781351.1]
HTH
Cheers,
ND
Use the "helpful" or "correct" buttons to award points to replies / Mark the thread as answered, if your question is answered.

Error committing transaction in Stored Proc call - prev solns not working

Hi All,
Our process invokes a DB adapter to fetch the response from the table for our request via Stored Procedure call but facing the below issue. Its a synchronous process. Stored Procedure is present inside the Package and we are calling the Stored procedure using that Package.
What we did is created a DB datasource of XA type and tried to call the Stored Proc but it was giving a problem “ORA-24777: use of non-migratable database link not allowed” and hence according to this thread Using DB links in Stored proc call in DB adapter 11G SOA we have modified the datasource as non-XA type.
While we do that, we could see that Stored Proc is called and the response is present in the reply payload inside the flow trace. But the instance is getting faulted and the error is “Error committing transaction:; nested exception is: javax.transaction.xa.XAException: JDBC driver does not support XA, hence cannot be a participant in two-phase commit. To force this participation, set the GlobalTransactionsProtocol attribute to LoggingLastResource (recommended) or EmulateTwoPhaseCommit for the Data Source.”
We have tried the properties of global transaction support as one phase commit, emulate two phase commit and logging last resource but error remains the same.
Database from which we are getting the response is of version "Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production". Will the database link error arises even if we connect to Oracle Database?
Please could you advise me solutions to resolve this issue.
Thanks in advance.

You are using Non-XA because it means (among all others) that the commit issue can be handle by the DB as well.
The Emulate Two Phase property imitating the XA transaction in that way, that it allows you to manage a local db transaction.
You can stay with XA connection, but then you will have to use "AUTONOMOUS_TRANSACTION pragma" in your procedure.
Enter the following link to find good explanation about all of your questions:
http://docs.oracle.com/cd/E15523_01/integration.1111/e10231/adptr_db.htm#BGBIHCIJ
Arik

Error in Transaction data

Hi Folks,
In System logs, daily I am encountering the message as "Error in transaction data".
The messages are listed in SM21 in sequence as -
Error processing batch input session PMFMASSIGN
> Queue ID: 07011706105177351507
> Transaction no. 1, block no. 1
> Error in transaction data
On more detailed analysis, after drilling further through each message I found the following message relevant -
Documentation for system log message D2 0 :
Entry relating to an error during the processing of a batch input session. In the batch input session the data for the next transaction is requested. However, the data read is no transaction data. The session has probably been destroyed in the database.
Please explain as why the issue is occuring. I remember some time back, I executed RSBTCDEL2 on Production to clear invalid batch sessions but had to terminate due to long run.
Kindly help me fix this.
Regards,
Nick

One interesting discovery I just found in R/3, was this job log with respect to the above process chain:
it says that the job was cancelled in R/3 because the material ledger currencies were changed.
the process chain is for inventory management and the data load process that get cancelled are for the job gets cancelled in the source system:
1. Material Valuation: period ending inventories
2. Material Valuation: prices
The performance assistant says this but I am not sure how far can I work on the R/3 side to rectify this:
Material ledger currencies were changed
Diagnosis
The currencies currently set for the material ledger and the currency types set for valuation area 6205 differ from those set at conversion of the data (production startup).
System Response
The system does not allow you to post transactions after changing the currency settings to ensure consistency.
Procedure
Replace the current settings with the those entered at production
start-up.
If you wish to change the currency settings, you must use programs to convert data from the old to the new currencies.
Inform your system administrator
Anyone knowledgable in this area please give your inputs.
- DB

Error In Transaction F-44 for Foreign Vendor Payment

Hi Experts,
User is getting the Error In Transaction F-44 (G/L account 14281001 xxxx does not exit) while doing Vendor Payment to Foreign Vendors.
When I checked in Vendor Master Data, Reconcilliation account is maintained for all Foreign(other) & Foreign(Intercompany) Vendors.
The GL 14281001 is maintain in the account determination configuration for other Foreign Vendors.
User is getting this Error After successful FF67 transaction Process.
Please advice.

Hi Amitash,
GL is created @ COA level & not mark for deletion. This GL is not created in Company code. I discussed with user she was saying
F-44 transaction is booked a realized gain/loss while a foreign vendor invoice clearing vs payment. Normally this realized gain/loss must be booked directly to the foreign vendor account which is linked to GL XXXXXXXX for all IC foreign vendors and linked to GL YYYYYYYY for all other foreign vendors .
It will be not correct to book a foreign vendor realized gain/loss to a separate account therefore a new GL 14281001 should not be created in comp code XXXX, instead of incorrect GL14281001 SAP must select either GL XXXXXXXX for IC foreign vendors or GL YYYYYYYY for all other foreign vendors.

Error in transaction SOAMANAGER from Dev ECC6

Hi,
I am getting below error in transaction SOAMANAGER -- Application & scenario comm -- single service admin -- select service Z* -- apply selection -- Open Web Service navigator for selected binding then getting error as below:
Error:
Cannot download WSDL from http://<host>:8010/sap/bc/srt/wsdl/bndg_DF5CDA3549E109F1A9D000145E7A77A0/wsdl11/allinone/ws_policy/document?sap-client=010: It is not allowed to access this service. If you believe you should be able to, please contact your system administrator
I appreciate if you could help me in this.
- Pankaj

Hi Pankaj,
This error message is caused by security considerations. The WS Navigator can access only web services which are deployed on the local engine. To allow the WS Navigator to access an external hosts, you have to add
these hosts, to the WS Navigator white list. The white list is a list hosts which the WS Navigator should be able to access.
Please refer to this link, which describes where the white lists are maintained in the visual administrator: http://help.sap.com/saphelp_nw04/helpdata/en/7c/f257422d095542e10000000a1550b0/content.htm
When configuring the white lists one can use wild card. For instance. If a web service deployed on www.sap.com should be accesseed by the WS Navigator, then the the white list should contain *.sap.com. The whitelist can contain more then one host, in that case they should be separated by an comma or semi-column.
Hope this can fix your issue.
Regards,
Blanca

LSMW - Error BDC_INSERT, Transaction code .. is invalid XD01

Dear all.
I have done the following Steps:
1 - Maintain Object Attributes. Chose the Object type Batch Recording, then created a Record using the name (CLI_PMR). And created the Batch record and then assign the fields name.
2 - Maintain Source Structures Created the Struture (CLI_PMR1)
3 - Maintain Source Fields Assign the fields name and length that I used in my program. (CLI_PMR1).
4 - Maintain Structure Relations Assign the Struture (CLI_PMR1 to CLI_PMR)
5 - Maintain Field Mapping and Conversion Rules The normal thing in this point.
6 - Specify Files - Specified the Legacy Data, path for the file.
7 - Generate Read Program Generated the Program.
8 Read Data Executed this Step and every thing is correct
9 - Generate Conversion Program Generated the program
10 - Convert Data Convert data
11 - Display Converted Data Every thing is fine, with no errors
12 - Create Batch Input Session- At this the error message appears Error BDC_INSERT, Transaction code .. is invalid time.
At the time we have created other LSMW programs for this T-Code and every thing is OK.
I'm using the T-CODE=XD01
Best Regards
Pedro Miguel Rodrigues

Hi, I had the same problem in LSMW when generating a batch input for trx IE01. The cause was that there were tab/newline-characters in my text file (some descriptions contained tab-characters). Since I used a tab delimited file, these tabs/newlines in the fields messed up my file.
The excel file contained multiple lines per cell in some description fields. When this was exported to tab delimited text, it contained additional tabs. After checking the contents and removing the tabs/newlines from Excel and performed a new export to txt-file, it was solved.
Best regards,
Jan-Peter Molenaar
SAP EAM Consultant

Newstand in app purchase made in DPS is appearing in store with "error" below instead of the purchase price/download.

Newstand in app purchase made in DPS is appearing in store with "error" below instead of the purchase price/download. Not sure why, as the product ID number matches up between itunesconnect and DPS. Any idea how to fix?

same here. this thread suggest that it's carrier related issue
http://supportforums.blackberry.com/t5/Payment-Service/Error-quot-The-Item-you-requested-is-invalid-...
Twitter: @gyubok

HT201318 I keep getting an error message when trying to purchase asdditional icloud storage. All information is up to date.

I get an error message when trying to purchase addtional icloud storage. All of my credit card and account information is up to date.

This behavior was described here many times.
Apple delivered a technote about that.
Go to my public BOX (address below)
Download :
public_YK›
for_iWork'09›
other_iWork'09 items ›
uninstall iWork '09.zip
Expand the archive then run the script.
After that, reinstall the application (or the entire package)
If you bought Pages thru the Mac App Store, there is no need to pay one more time.
Yvan KOENIG (VALLAURIS, France) jeudi 26 avril 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.3
My Box account is : http://www.box.com/s/00qnssoyeq2xvc22ra4k

I keep getting an error message when trying to purchase more gold coins?

I keep getting an error message when trying to purchase more gold coins. Same unexpected error occurs with all of my slot machines??

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
 Cheers, Tom

I just set up my new iMac, and receive error messages when trying to purchase from the iTunes store (error 8003) or update from the App store (error 403 forbidden). THOUGHTS?

I just set up my new iMac, and receive error messages when trying to purchase from the iTunes store (error 8003) or update from the App store (error 403 forbidden). THOUGHTS?

I am not sure what you mean by "Flash Player for steam"; the only Flash Player installers I know is the ActiveX (for Internet Explorer) and the plugin (for other browsers); you can find both at http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player- windows.html#main-pars_header
[topic moved to Flash Player forum]

Error -5002, Update quantities in purchase order? (INV1.Quantity) Line[2]

We are trying to create Invoices using the SDK tool for a clients interface. Everything goes ok, except at the point where we add the document, we get the following message:
Error -5002, Update quantities in purchase order? (INV1.Quantity) Line[2]
Any ideas? We have searched the SAP notes, but nothing is available. Are we missing anything?
We are running on Version 6.50.098
Thanks
Marios

Hello Marios,
This error occurs because the last line you are trying to add to the Marketing Document is an empty line. It is a new functionality in Version 6.5 that the document object automatically comes with one document line so if you are adding just one line you do not need to use oDocument.Lines.Add,
It is only for the second and subsequent lines of marketing documents that you require the method oDocument.Lines.Add. Note 722693 describes the issue.
Regards,
Lisa

Error: [129]: transaction rolled back by an internal error: [129] transaction rolled back by an internal error: exception 141000274: exception 141000274: TRexUtils/ParallelDispatcher.cpp:275 message not found; $message$=

Hello Gurus,
I have a couple of calculation views in HANA and each of them has text fields (like Employee Name, Country Name etc.).
As part of my project requirement, I have join those two views and get all the fields that exist in them.
When I am doing so, I am getting a weird error as shown below.
Error: [129]: transaction rolled back by an internal error: [129] transaction rolled back by an internal error: exception 141000274: exception 141000274:
TRexUtils/ParallelDispatcher.cpp:275
message not found; $message$='TSR HTKD JFSDFM'
Please check lines: 59,
Upon, researching further, I could see that the value 'TSR HTKD JFSDFM' is the value in text field of Employee Name.
I did try to increase the length of the field and change the data types but nothing has worked.
Could you please help me in getting this one resolved.
Thanks,
Raviteja

Hi,
I am exactly facing the same issue:
Error: [129]: transaction rolled back by an internal error: [129] transaction rolled back by an internal error: exception 141000274:
But i found a fix :-) .....
This may be a very late reply but it would help people who desperately searching for an answer for this issue.
I used CAST function .. The problem is, we are selecting data from table and of course we dont know the size of the data (attribute) @ runtime. We assign the length by looking at the table attr length or view op attr length. But what happens is the junk data which exceeds the limit of the allocated space hence we get this error.
So i used CAST function to truncate the excess junk values (may be spaces).
Example:
I have a ATTR view of date in the format YYYY-MM-DD which means 10 char size.
In my CALC view I have created date OP column of VARCHAR(10) but I get the above error for no reason. Eventhoug i am 100% sure about my ATTR date would be max of 10 char my CALC view is failing @ runtime.
So i did a CAST on date as CAST(my_date as varchar(10)) and the magic happend. It works .......
But you need to be careful in using this because if you use CAST you may lose data. Careful. In my case i dont.
Somebody from HANA team should look at this issue from SAP and solve this. I am sure it is a serious bug from HANA (eventhough i am using SAP HANA SP09 Rev 92 the most latest as of today !!!!!!!!!! )
Enjoy....
Thanks & Regards
Prakash K

Error in transaction forein exchange purchase

Similar Messages

Maybe you are looking for