Error in Transaction launcher - CRM 5.0 / ECC 6.0

Hello all,
I am trying to pull one ECC 6.0 transaction into CRM 5.0 IC webclient through launch transaction.
When I click the link in the NavBar, I get the logon box for ECC system but after I enter the logon details below error message is getting displayed.
The transaction call failed
Reason:: Function module EWB_PROC_CREATE does not exist
But this FM exists in both CRM and ECC systems.
Any ideas about this error message?
Best Regards,
Nag

Hi Sudeep,
Thanks for the reply.
I am not sure about the EEWB extensions.
Initially I created a launch transaction using BOR method the path of the ECC logical system is given as below.
http://ssever:port/sap/bc/gui/sap/its/CRM_CIC_RABOX
But now I've changed the path as: http://ssever:port/sap/bc/gui/sap/its/CCMP_RABOX
and it is working now. I am able to pull the transaction from ECC although some other data flow issues are there.
So looks like there is some issue with the serivce CRM_CIC_RABOX in our system.
Thanks to all,
Nag

Similar Messages

  • RFC error for Transaction Launcher to launch a CRM ABAP report  on WEB UI

    Hi all,
    My Task is to assign a custom CRM report on the web ui.
    I have created a transaction for this and using the transaction launcher wizard to assign it as a link on web ui .
    In the transaction launcher wizard ,  In the 'Define Further Technical Details' i have entered the
    Transaction Type as 'BOR Transaction'
    Logical system : my current system crm client which is QCCCLNT703
    BOR OBJECT TYPE : tstc_uif (also tried with TSTC )
    Method Name : EXECUTE
    When i try to click on the report on WEB UI, it gives me a status message saying the ''RFC Destination is not set up for QCCCLNT703'.
    Can you please advice me on how to do this . I guess the issue is with the Logical system set up .

    Hello,
    I think you have rightly pointed out the reason of the error. You must have maintained the logical system 'QCCCLNT703' using transaction CRMS_IC_CROSS_SYS. However you also need to maintain the same entry in transaction SM59 with name RFC destination name as 'QCCCLNT703'.
    I hope this would fix the issue.
    Thankx,
    Amit Sen

  • Error in transaction Launcher handler class

    Hello friends,
    I am following the step from the CookBook for the creation of the Transaction Launcher
    but in side the class method
    IF_CRM_IC_ACTION_HANDLER~PREPARE_DATA_FLOW
    it is showing the error
    CREATE_ENTITY is unknown or Protected or Private.
    Its supper class is CL_CRM_IC_ABOX_ABSTRACT_BOR
    and interface included is IF_CRM_IC_ACTION_HANDLER.
    Will i have to make any change in side these class or there any other way to configure the transaction launcher.
    Regards
    Pulkit Agrawal

    Hi Sudeep,
    Thanks for the reply.
    I am not sure about the EEWB extensions.
    Initially I created a launch transaction using BOR method the path of the ECC logical system is given as below.
    http://ssever:port/sap/bc/gui/sap/its/CRM_CIC_RABOX
    But now I've changed the path as: http://ssever:port/sap/bc/gui/sap/its/CCMP_RABOX
    and it is working now. I am able to pull the transaction from ECC although some other data flow issues are there.
    So looks like there is some issue with the serivce CRM_CIC_RABOX in our system.
    Thanks to all,
    Nag

  • Transaction Launcher to open an ECC transaction

    Hi Experts,
    My requirement is to launch an ECC transaction VA01 from CRM Interaction center.
    1. It should open the VA01 screen with the Order Type populated, say for example 'OR'.
    2. When I click on Continue, it should show the creation screen with the sold to party defaulted as the confirmed BP ID.
    I have done the folowing steps till now.
    1. I have created an ECC Object as a copy of Object TSTC. I have implemented the method Execute( Synchronous option checked). I have added two parameters to the execute method one called as SoldToParty with reference to KUAGV-KUNNR and the other SalesDocumentType with reference to VBAK-AUART.
    2. I generated, implemented and released this object.
    3. In the CRM system, I have configured a Transaction Launcher with reference to this BOR Object. I gave the parameter for Object Key as VA01 and the SoldToParty as the current customer and I have hard coded the value for the SalesDocumentType.
    4. I have configured the Logical Links and added it to the work center.
    Now when I click on the logical link, it opens up the ECC transaction but nothing is defaulted in the VA01 screen. I debugged the PREPARE DATA FLOW METHOD. The correct parameters are passed.
    Why am I not able to see the defaulted parameters in my transaction. Please help. Thanks in advance
    Regards,
    Razina

    Hi Raman,
    The links talk about generic tranaction launcher. My requirementis to default some values in the ECC transaction.
    I found this link with the steps to default values:
    [Re: ITS VA01 or other ERP transaction]
    It is said that "Redefine the method EXECUTE to read these parameters and perform the required action. In your case you could call the transaction using a BDC table, or set the SPA/GPA parameters before calling VA01".
    I am not sure how to do this.Do you have an example of the EXECUTE method?
    Thanks.
    Razina

  • Transaction launcher for BOR in ECC

    Hi All,
    Transaction Launcher for BOR objects as explained in:
    http://help.sap.com/saphelp_crm40/helpdata/en/12/c3e68620514b499c06b8eb26874424/content.htm
    only refer to R/3 Enterprise.
    How should we launch transactions in ECC ?
    10x,
    Eyal

    Hi,
    I do mean mySAP ERP by writing ECC.
    what I am looking for is the settings in transaction
    CRMS_IC_CROSS_SYS and the settings in the target system.
    for now I tried in ECC trx. SICF activate (almost all) services and in CRM the ITS URL is http://<servername:port>/sap/bc/gui/sap/its/ccmp_rabox
    10x,
    Eyal

  • Unable to access ECC transactions from CRM using Transaction Launcher

    Hi Folks, we are trying to create a booking request using VA11 from portal. For this we have configured transaction launcher in CRM which will connect to ECC system from portal and VA11 screen will be launched. For this we have done the necessary configuration in transaction launcher (Including RFC destination and logical system) and this is working fine in Dev system but not in quality system. We are able to see SAP screen with toolbar Menu and System but not the entire transaction (refer image below). Our questions here are,
    1)     What user type has to be configured when connecting from CRM to ECC? (System, Communication data or any ohter)
    2)     If this has to work with user as Dialog, is there any supporting document from SAP saying this should be Dialog user?
    3)     Is there any other issue and need development specifically related BOR TSTC?
    Warm regards and thanks in advance for your time.
    Prasad

    Hello JC,
    Yes, it is possible . You have to create new work center link or Direct Link for the existing transaction launcher.
    Transaction Launcher
    Regards,
    Ashik

  • Transaction Launcher error in CRM 07

    Hello Guys,
    I am getting following execption when i try to configure transaction launcher in webUI 07. Any idea?
    Cannot display view BSPWD_BASICS/WorkAreaHostViewSet
    An exception has occurred Exception Class  CX_BSP_WD_RUNTIME_ERROR - Component is not defined 
    Method:  CL_BSP_WD_COMPONENT_DESCRIPTOR=>CONSTRUCTOR 
    Source Text Row:  26
    Error occurred during navigation
    An exception has occurred Exception Class  CX_BSP_WD_RUNTIME_ERROR - View . could not be bound 
    Method:  CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW 
    Source Text Row:  162
    Thanks,
    Shubhangi

    Hi Ashok,
    > I checked the sm59 in CRM box. the  RFC connection ( type 3) is configured for XI box (XI1CLNT100_RFC).
    > In SXMB_ADM of CRM box the correspoinding integration server is 'dest://XI1CLNT100_RFC'.
    XI adapter uses HTTP connection.So create RFC destination with Connection type H and following parameters
    1 Connection Type: H
    2 Target Host: System name
    3 Service Number: HTTP Port name
    4 Path Prefix: /sap/XI/engine/?type=entry
    On the Logon/Security tab page, enter the following logon data:
    1 User: XIAPPLUSER (for example); this user should represent the sending business system (see also the SAP XI Security Guide under Service Users for Message Exchange).
    2 Password: the password you have specified for this user
    3 Client: SAP XI Integration server
    4 Language: Language required
    and use this HTTP destination in TA - SXMB_ADM configuration.
    Cheers,
    Jag

  • ECC BSP page display from CRM through Transaction Launcher

    Hi Experts,
    We have a BSP application in ECC and want to launch the page from CRM using transaction launcher. The page is already launched from a different link. Is it possible to use the same transaction launcher from new link to navigate to the same page?
    Thanks,
    JC

    Hello JC,
    Yes, it is possible . You have to create new work center link or Direct Link for the existing transaction launcher.
    Transaction Launcher
    Regards,
    Ashik

  • Transaction Launcher in CRM 7.0 reverts back to CRM view.

    Hi Experts,
    I have configured all the necessary setting required for transaction launcher but still cannot launch it.
    The issue is when i launch it, it directs me to the logon screen of target system (ERP/ECC). Once i give my userid/psw, system thinks for couple of second and the system jumps back to CRM view.
    In my case, i'm using transaction launcher to launch VA31 (Scheduling agreement). On executing the launch transaction it is closed immediately and the system reverts back to account identification screen without any error message.
    I have created ZTSTC in ECC and checked "synchronous" for method "transaction.execute". Do i need to create ZTSTC in CRM as well?
    Thanks
    Shree

    Hi Shree,
    First, you don't need to create ZTSTC in R3/ECC. Create ZTSTC in CRM and make the method: ZTransaction.Execute - Synchronous. Then change the status to 'Released'.
    In R3, in /NSE80 create a Display Object, like "ZCUSTOM". In ZCUSTOM create a method. In your case create "ZVA31". In the ABAP tab of the method, check 'Transaction' and in the 'Name' field enter: VA31. Save and release this method and Object.
    Now, before you proceed with the next step of seting up SSO (Single Sign On) check if these notes have been followed:
    A) Maintain the settings for domain 'CRMD_CIC_ABOX_ITS_BASE_URL' in SE11 as per NOTE: 1337200.
    B) Maintain settings for logical systems as per Notes: 1337472 (For R3) and 1337200 (For CRM) logical systems.
    After this ensure that the URL for R3 ITS looks like this: http://<server>:<port>/sap/bc/gui/sap/its/webgui/!?transaction=IC_LTXE&okcode=ICEXECUTE
    Before creating R3/ECC Transaction launcher links - SSO certificates need to be setup by BASIS.
    a.     Import CRT certificate into target system (your CRM client) via Export/Import in STRUSTSSO2
    b.     Run SSO2 in target (CRM) and check green lights.
    c.     Maintain table TWPSSO2ACL and put in system and client (CRM, XXX)
    d.     Activate in SICF /sap/public/bc/its and also sap/bc/gui/sap/its
    e.     SE80 -> Internet Services.  Look for SYSTEM and WEBGUI and Publish them.
    Please try these and let me know if this works for you.
    Regards,
    Ramesh Nallabelli

  • How to Call SAP ECC transactions into CRM IC Webclient Profile Screen

    Dear all,
    We are implementing IC Webclient application for our Clientu2019s call center operations.
    All sales related activities are being created in back end SAP ECC system like, starting from Quotation to Sales Order, Deliveries and Billing.
    Client wants to see all relevant ECC reports of Sales transactions in IC Webclient Screen.
    Connectivity between SAP CRM and ECC has already been established and we did all basic configuration for IC Webclient, but donu2019t know how to and where to call ECC transaction in IC Webclient Screen.
    I am looking for suggestions from any of you to handle this requirement successfully. I would be grateful if you send me any documentation which addresses this requirement.
    Your suggestions and help will be highly appreciated.
    Thank you,
    Raghu ram.

    Hi,
    Step-by-step process for the same is as follows:
    1. Create a launch transaction to launch the relevant BOR object at the following
    IMG->CRM->IC WebClient->Basic Functions->Transaction launcher -> Configure Transaction Launcher (Wizard).
    This wizard is very useful and easy way to create a launch transaction and guides through each step and generates a handler class for you.
    2. This transaction now has to be incorporated in the Navigation bar. For this you have to create navigation bar entry and navigation bar profile.
    IMG-> CRM-> IC WebClient->Basic Functions -> Define Navigation Bar Profiles
    Here you have to first Define Entries where you would input Launch transaction ID created in step 1 and then Define the Navigation Bar Profile.
    3. Assign the Navigation bar profile to IC WebClient profile.
    Please note that you can you Transaction launcher for incorporating any web links, PCUI Transactions, CRM Transactions, ERP transactions etc.
    Regards,
    Deepak

  • Transaction launcher, get error Starttransaction is not defined

    Hi, I am trying to create a new link in the navigation bar that should call ITS and a customer created transaction in CRM. We have been doing it before and these links are working, but now trying to create another link in the navigation bar, I gets an error
    "Starttransaction is not defined". In the Handleclass created with the transaction launcher I gave it the name ZCL_filarkiv. When I did that I got an syntax error "There is a syntax error in class zcl_filarkiv". When I goes to SE80 in order to check the class, I can see several errors, I correct them and add a call in the method IF_CRM_IC_ACTION_HANDLER~PREPARE_DATA_FLOW in order to call the ITS and our customerdefined class. The code added is:
            ICWEBCLIENTBORKEYPARAMETER =
      'ZARKIV'. "#EC NOTEXT
      me->set_container_object(
        iv_name        = '<MAINOBJ>'
        iv_object_key  = ICWEBCLIENTBORKEYPARAMETER
        iv_object_type = gv_bortype
    The transaction ZARKIV is working calling it directly in CRM.
    The syntax errors disappears and I can activate the class without problems. But when trying to use the link, I get the error "Starttransaction is not defined". Also other links that have been working before now gets an error "Error in the starttransaction ZCL_filarkiv.
    I do not have a clue what the problem could be. Is there a step that I have missed to do? Thank you for your help, regards Lena

    Found out that xpath.js wasn't uploaded correctly. Now that
    it is, it works!

  • Open ERP transaction within CRM 2007 using wizard for transaction launcher

    Hello everybody,
    I am trying to launch a SAP ERP transaction within SAP CRM 2007 using the transaction launcher wizard.
    First I maintained all necessary setting for the RFC connections (in ERP and CRM) using for example transaction SM59 and BD87, e.g. the master data replication is working fine. Second I created a business object type based on the SAP Standard business object TSTC and set the u201CExecuteu201D method to u201CSynchronousu201D in SAP ERP.
    Afterwards I created the URL for our ITS server and started the transaction launcher in CRM. During the step u201CFurther technical detailsu201D I selected as transaction type u201CBOR transactionu201D and chose our logical system (ERP) and added our newly created BOR object type as well as the method u201CExecuteu201D. If I now press the u201CNextu201D button the error message u201CAn RFC destination could not be specified for the logical system XYu201D is shown.
    Any help is highly appreciated.
    Thanks lot and kind regards,
    Franziska

    Hi,
    The error you get is because the client you have mentioned for logical system mapping and the client in which you created the BOR object are not same.
    Remember, for sucessfull transaction Launcher Configurations,
    1) The client in which WEB UI Runs
    2) The Logical System mapping and client mentioned in ITS url
    3) The client is which you created the BOR object.
    4) The client on which you are configuring transaction launcher wizard
    ALL SHOULD BE THE SAME CLIENT, unless you are using the OWNLOGSYS concept for logical system mapping.
    For example,
    If my WEB UI is on client 200 of development system,
    then i must create TSTC based BOR in client 200 , Map logical system for client 200 and configure trnsaction launcher in client 200.
    In this approach, you cant transport the developments to other system and client ( like Quality and production system) , hence its advicible to create a logical system with name OWNLOGSYS. The name of logical system must be kept OWNLOGSYS in all the systems and clients so that then you can transport yout transaction launcher developments and the error you get now will not come. It its not possible to maintain the logical system with this name in all the system , then you will have to do as i mentioned in points 1 to 4.
    Hope this helps.
    Thanks & Regards,
    Suchita

  • CRM - Transaction Launcher

    Hi Guys,
    I'm trying to configure transaction launcher for transaction VA11 (ZDD_VA11).. I've done all the necessary settings but when I try to test it via Web client, it gives following error..
    Error:-
    Detail transaction ZDD_VA11 not defined.
    Detail Launch transction not defined.
    Execution not possible; error in launch transaction.
    Is there a report that needs to be run to convert the logical system correctly for the mapped logical system on the transaction launcher method? What is that report or program and how do I run that to over come that problem...
    Thanks,
    KP.

    Hi Gurus
    I am trying to configure URL on WEB UI thru transaction launcher in SAP CRM.
    I am getting the following errors
    Error within a launch transaction
    Launch transaction handler does not exist
    Launch transaction ZWEBPAGE not defined
    Launch transaction not defined
    Could please let me know where I went wrong .
    Thank you
    HK

  • LAUNCHING URL BY CLICKING ON BUTTON(USING TRANSACTION LAUNCHER) IN CRM 2007

    Hi,
    I am working on the object which requires configuring transaction launcher so that when button is clicked,URL is open. This development need to be implemented in CRM 2007.
    Kindly suggest.

    We are working in a sandbox environment on CRM 2007 and trying to launch a transaction in an ECC 6.0 system. We get a login box into the ECC server which executes fine but after a few seconds we are returned back to the CRM server without displaying the transaction. All authorizations are correct but it seems that the container is not being populated with the requested transaction. Has anyone else seen the same behavior? We are about to put in a note to see if we can get assistance. We have implemented latest Support Packs and Enhancement Pack 3 was recently installed in the ECC environment. We have implemented all the appropriate notes (1029777) to make sure that we are using the recommend functionality.

  • TRANSACTION LAUNCHER--CALLING CRM Z TRANSACTION THROUGH WEB UI

    As per the requirement, we are trying to call CRM  Z transaction through web UI. We have used the Object TSTC and created a replica of the object ZTSTC and used the method execute. Made the necessary config for navigation bar and Business role. We could see the link in the Navigation bar but the link could not call the transaction. Pls suggest.Do we need to take the object of the Transaction or copy TSTC and proceed. Thanks in advance.Points will be awarded

    PLS FIND THE DETAILS TO PROVIDE THE INPUTS
    Configure Transaction Launcher TO CALL T.CODE ZEGNM_IMG FROM CRM THROUGH WEB UI USING TRANSACTION LAUNCHER
    USED THE OBJECT ZTSTC BY COPYING TSTC OBJECT AND BY RELEASING THE OBJECT WITH METHOD EXECUTE
    PROVIDED THE T.CODE ZEGNM_IMG IN THE VALUE FIELD IN THE ABOVE SCREEN
    CREATED THE DIRECT LINK ZEGNM_K
    CREATED THE DIRECT LINK GROUP ZEGNM_K
    ASSIGN THE DIRECT LINK TO THE DIRECT LINK GROUP
    ASSIGN THE DIRECT LINK GROUP TO THE PROFILE TMFLEASING WITH POSITION 80
    IN THE BUSINESS ROLE CUSTOMIZING MADE THE DIRECT LINK GROUP VISIBLE
    AFTER MAKING THE ABOVE CONFIGURATION WE HAVE LAUNCHED THE WEB UI AND THE FOLLOWING ERROR IS SHOWING UP
    PLS FOLLOW THE ABOVE SCREENSHOTS AND PLS PROVIDE YOUR INPUTS TO ACHIEVE THE OBJECTIVE OF LAUCHING THE Z CRM GUI TRANSACTIONS USING TRANSACTION LAUCHER
    ALSO PLS FIND THE SCREENSHOT OF ITS
    URL OF ITS USED
    u201Chttp://crd.tmf.com:8003/sap/bc/bsp/sap/its/webgui?transaction=IC_LTX&okcode=ICEXECUTEu201D

Maybe you are looking for