Error in Transfer (IDOC and TRFC )

Hi experts
I am getting the error in Transfer (IDOC and TRFC ) Info IDoc 1 : Sent not arrived : Error posting data to port" when I am trying to Upload data by executing an infopackage.
Pl. advice.
Thankls in advance
Dinesh Sharma

Hi Dinesh,
This latest error code E0 266 & is really a Basis one (BC-MID-ALE); not BW.
If the error occurs all the time then please do the following.
Firstly, please ensure that the relavant RFC destination is set up as per SAP Note 613389. The use of a logon language is a must.
Secondly, please also add the value of SCP2 as well as SCP5 to the role of the RFC user as per Note 784381 (SCP2 isn't mentioned in the note but please add it anyway) - This should resolve your issue.
If you only see this error sometimes, then set the flag in tcode OYEA as per Note 784381.
Hope this helps,
Colum

Similar Messages

Transfer(IDocs and TRFC) error when use infopackage to load data from R/3

I create an infopackage to load data from R/3, when start immediately ,there is no data transfered. The return error is :
transfer(IDocs and TRFC): Errors occurred
request IDoc: Application document not posted
Does anybody know how can correct this error?
Thanks great.

Hi Yimeng,
Check in SM58 transaction code in R/3 and see if any LUWs are stuck there. If so you can execute them manually and complete the data load.
regards,
Sumit

Transfer (IDocs and TRFC): Missing messages or warnings

Hi,
While loading data from ECC to BI, I'm getting the following Error. It is for all DataSources...even for Full loads with 15 records also.
Requests (messages): Everything OK
Extraction (messages): Missing messages
-->Missing message: Request received
-->Missing message: Number of sent records
-->Missing message: Selection completed
Transfer (IDocs and TRFC): Missing messages or warnings
Info IDoc 1 : sent, not arrived ; Data passed to port OK
Info IDoc 2 : sent, not arrived ; Data passed to port OK
Info IDoc 3 : sent, not arrived ; Data passed to port OK
Info IDoc 4 : sent, not arrived ; Data passed to port OK
Request IDoc : Application document posted
Data Package 1 : arrived in BW ; Processing : Selected number does not agree with transferred n
Processing (data packet): Everything OK
Data Package 1 ( 10 Records ) : Everything OK
Note: I tried with following options, so please don't repeate again.
1. No LUWS in ECC in SM58.
2. Connections are OK an dtested in SM59.
3. WE20 is also OK.
4. Job Finished successfully in ECC.
5. No Dumps in ST22 in ECC.
6. Dumps in BW in ST22.
Error Message is:
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"MESSAGE_TYPE_X" " "
"SAPLRSSM" or "LRSSMU36"
"RSSM_OLTPSOURCE_SELECTIONS"
7. Tried with BD87 in ECC and BI also.
Thanks
Ganga

Hi,
Every thing is fine. And I searched for OSS note and I found some notes but I'm unable to resolve it. My data Target is Cube and DSO's.
Note 852443 - Dump in include LRSSMU36 RSSM_OLTPSOURCE_SELECTIONS
Note 869628 - Constant WAITUPDA in SMQ1 and performance optimization
Note 901878 - Information IDoc Sent, but did not arrive
Note 913330 - tRFC LUWs are not created
Thanks
Ganga

Transfer (IDocs and TRFC ) Missing Messages

Hi,
I have taken INIT load and records were loaded successfully in the target system.Now when i run delta , the status goes Green but 0 records are loaded ,and also there is error as :
Requests (messages): Everything OK
Data request arranged
Confirmed with: OK
Extraction (messages): Everything OK
Data request received
Data selection scheduled
No data available, data selection ended
Transfer (IDocs and TRFC): Missing messages
Processing (data packet): No data
Subseq. processing (messages) : No errors
Process Chains : Everything OK
Other (messages): Everything OK
I have checked extractor in source system and it has records in it.
Edited by: Bhavna_m on Aug 26, 2011 12:57 PM

Hi,
Transact RFC error
tRFC Error - status running Yellow for long time (Transact RFC will be enabled in Status tab in RSMO).
Step 1: Goto Details, Status get the IDoc number,and go to BD87 in R/3,place the cursor in the RED IDoc entroes in tRFC
queue thats under outbound processing and click on display the IDOC which is on the menu bar.
Step 2: In the next screen click on Display tRFC calls (will take you to SM58 particular TRFC call)
place the cursor on the particular Transaction ID and go to EDIT in the menu bar --> press 'Execute LUW'
(Display tRFC calls (will take you to SM58 particular TRFC call) ---> select the TrasnID ---> EDIT ---> Execute LUW)
Rather than going to SM58 and executing LUW directly it is safer to go through BD87 giving the IDOC name as it will take you
to the particular TRFC request for that Idoc.
OR
Go into the JOB Overview of the Load there you should be able to find the Data Package ID.
(For this in RSMO Screen> Environment> there is a option for Job overview.)
This Data Package TID is Transaction ID in SM58.
OR
SM58 > Give * / user name or background (Aleremote) user name and execute.It will show you all the pending TRFC with
Transaction ID.
In the Status Text column you can see two status
Transation Recorded and Transaction Executing
Don't disturb, if the status is second one Transaction Executing. If the status is first one (Transation Recorded) manually
execute the "Execute LUWs"
OR
Directly go to SM58 > Give * / user name or background (Aleremote) user name and execute. It will show TRFCs to be executed
for that user. Find the particular TRFC (SM37 > Req name > TID from data packet with sysfail).select the TrasnID (SM58) --->
EDIT ---> Execute LUW
Thanks,
JituK

Transfer (Idocs and TRFC): Errors occured

Dear All,
data extraction from R/3 into BI is working for small number of records. for huge number of records it ends with error,
i have adjusted info package setting DataS. Default Data Transfer but did't work. on the R/3 side i can see "transaction recorded" on tcode SM58 and the job successfully completed
please share me your experience on this issue,
With Regards,

Okay then I would think that there is some cofiguration issue related to communication between two system. Can you check below:
1. SM59 - RFC connections are wroking fine?
2. Any stuck Idoc or failed idocs in WE05/WE02- just trigger the infopackage and have look at WE05 and monitor the idocs. It may happen that you are able to recieve the Idocs but not able to send it back.
3. Configuration in WE20 for partner profiles in ECC system for your BW system. mainly outbound parameters message type RSSEND. Check if is as transfer immedeately.
4. Try executing your datasource in RSA3 with same exact selections as you pass from BW.
5. Check if you have any short dumps in ST22.
6. Check logs in SM21.
7. Try running infopackage for the same selection from past when you know it worked fine.
Please let me know findings.
Thanks
Amit

Transfer (Idocs and TRFC): Errors ocurred

This error occured when we are loading flatfile (trans) into transactional infocube:
Info Idoc 1: IDoc with errors addeed (in red)
Info Idoc 2: IDoc with errors addeed (in red)
Info Idoc 3: IDoc with errors addeed (in red)
Data Package 1: arrieved in BW; Processing: Selected number does not agree with transferred
Info Idoc 3: IDoc with errors addeed (in red)

What other data package errors are you getting? TRy going to a PSA first if you can...I have never tried loading a flat file to a transactional ODS directly.
/smw

Regd internal error while importing IDOCs and RFC's

Hi All,
Any idea, why i am getting internal error while importing RFX from ECC system to Dev system of PI.
It takes lots of time to import and many times it shows internal error.
I am able to login and select the RFC ... but all of sudden after selection ..the window gets freezed and i have to End task the IR part.
Is this a system error which only basis can fix?, have anyone faced similar issue.If yes please reply ..
Regards
Srini

Hi Srinivas
sevral times i faced this issue , ask your basis person , to increase the heap size a little more at XI server ,
and most of the time it happens due to Network down / connectivity .
take the help of your network team and basis team .
Regards
Abhishek

Problem with IDOCS transfer and TRFC

Hi,
when i load data , the load is sucessful but i am getting error at Transfer (IDOCS and TRFC) , This is happening daily .load is sucessful and the data is moving to the target ,but i am unable to understand why this error is being encountered ? does anyone have idea abt why this is happening ?
Regards,
Roja.

hai roja,
Transfer of records takes by Idocs and trfc's between source system and B.w system.u are getting error at transfer idocs and trfcs means that data is still in the source system i.e no transfer takes place due to some error.In details tab u can see that idocs and trfcs are in yellow in colour.click on the scroll down at transfer idocs and trfcs in details,by doing this u can see all the idocs like Request idoc,idoc1,idoc2,.........
see which idoc's are in yellow in colour.
suppose if the idocs are in yellow in color means it indicates that either idoc or trfc are hanging in the b.w side or source system side.
how to process these idocs?.
go to source system and by using the T.code:bd87 u can see all the idocs in the system.if any idocs in bd87 shows some error(i.e in red color),process them by selecting the particular idoc and click on execute process tab which is there on the right hand side.
To process the trfc:
Data transfer into BW takes place via Idoc and as LUW (Logical Unit of work). These LUW`s get transferred as TRFC`s. Sometimes due to any system issue, these TRFCs might get hanged either in the Source system or BW system.
suppose if there is no idoc error means go and check the trfcs in sm58.there u cans ee the trfc states i.e executable and recorded.if the trfcs are in recorded state for a long time means u have to process them.Place the cursor on the TRFC that is to be reprocessed and goto menu Edit --> Execute LUW. Go back to the process monitor screen and give refresh for the data load it can be found in the details tab that the TRFCs were processed and data load would have proceeded to next step.
Hope this helps u...assign points.......
regards,
sri

Transfer idoc

hi experts,
what is the differance between transfer idoc and collective idoc

Hi leena,
Transferring Idoc means sending Idoc to receivers using outbound program.
Collecting Idoc means receiving idoc using inbound program
Regards
Gokul
Reward Points if Useful

IDOCs in trfc with status text as error

Hi,
I have IDOCs in trfc queue with status text as 'The ABAP/4 Open SQL array insert results in duplicate database records'.
How to reach this error point and rectify the same.
Regards,
Sheetal

Hi Sheetal,
Please refer the link,
Successfully posted IDOC from XI but not reflected in Receiver R/3 system
Best Regards.
Reward points if it is useful.

ALE/ IDoc: Error while checking in and storing

HI Gurus,
i need to send Documents from one system to an other System. I use BDA5
Both system are using different File Systems and the DMS Archive is also different.
I can send the DOCMAS without errors. When i Try to process the Documents i can not process IDocs which have a file (Segment E1DRAWFILES) included. i get the Error messages Error while checking in and storing
I also sent some IDocs which have no files (no segment E1DRAWFILES) and these can be processed. Has anybody an idea whats wrong? If i use normal transaction CV0xN i can upload and checkin documents.
How can i convince SAP to successfully process the IDocs with files from the source system?
Thanks in Advance
Udo

HI,
Udo,
1. Are you taking about business document?
or
2. SAP dms Document?
If DMS doc then send details regarding document type, and business object used in definine document type for object linking.
In DC10 U check flag in define object linking, Object chek from ALE[Set flag]
for business document i think differen procdure while defining your document type. i guess.
Benakaraja

How to use ale/idocs in sap crm to transfer master and transactional data

hi all,
I am working on sap crm7.0 ehp1. I want to transfer my master and transactional data from crm development system to crm quality system here through idocs. I am aware of basic ale settings and successfully transfe the ztable data through idocs. But i am not able to find any proper step by step procedure for maste and transactional data in sap crm. Also sap ecc tcode NACE is not available here.
pls help..
regards,
kavita chaudhary

Kavita,
In CRM, Exchange Interface (XIF) ALE/IDOC is available to transfer master and transaction data. You can go through the following link for set up.
Basic Data exchange set up for ALE IDocs - Wiki - SCN Wiki
You can extend the standard XIF IDOCs using Transaction BDFg as well.
Thanks,
Ravi

Idoc or trfc error

Hi sap bw'iets
can any one describe step-by-step process to sloving IDOC or TRFC ERROR in production support.
thank you.
regards,
kiran

hi kiran,
sometimes idocs stucks in the source system, so it shows yellow in the monitor even if every thing else is showin green. so to correct this, go to environment -> Transact RFC -> In the Source System. If the status is showing "Executing" then leave it, otherwise u can drag it to BW by selecting execute LUW (F6), by selecting the tRFC.
hope this helps.
Regards,
Purvang
Assigning Point is to say Thanks in SDN *

Error in personnel number and transfer

Hi experts!
I need to run pre program DME: Transfer. The employee has the number 4 and the company code is BP01.
It shows me an Error:
Error in personnel number and transfer number     00000004 01
There is no entry in table for key:        T012K BP01 AR01 GIRO1
Error in personnel number and transfer number     00000004 01
There is no entry in table for key:        T012 BP01 AR01
I checked the T012 and I set the bank 01, but I can´t get into the T012K.
What does this error number refer to?

Hi carolina,
Go to SM31 and try maintaining V_T012K_CORE, V_T012K_D, V_T012K_W.
This is because the table T012K can only be maintained through restricted views.
Regards,
Dilek
Edited by: Dilek Ersoz on Jan 26, 2009 12:54 PM

SC approved, but doesn't create followon doc and NO error in transfer

Hi,
I am getting this strange issue. My cart is approved and i am expecting follow on PO doc to be created.
However no PO is created and strangely when i checked there is no error related to Error in Transfer too.
checked monitors and no info there on this sc.
How come SC is not even resulted in error in transmission?
Appreciate your inputs/clues.
Thanks
Krish

Everyone,
Thanks for your replies.
There is no issue logged in ST22 and also no alerts found in ST22. Checked BBP_PD too. It shows as approved. thats it.
Dinesh,
All my settings are working fine. The issue is i am having this problem only with very few shopping carts. Rest of them working fine and createing followon documents. If not, they are showing up as error in transfer and can see the log in RZ20.
But with this cart, i don't see any alert in RZ20. There is no entry found in BBP_Document_tab also.
I tried to run Get_Status program and it this SC is showing as not transferred and then i tried to run REQREQ also..but its not working.
So i am wondering what could be the reason for not being transferred to backend.
Appreciate any inputs/clues.
Thanks
Krish

Error in Transfer (IDOC and TRFC )

Similar Messages

Maybe you are looking for