Error in Transfer of Prod Ord to ECC

Hi Experts,
Hope you can help me with this issue. The converted planned orders in APO are not transferred to ECC due to this error "Backward Scheduling (enter finish date)". Seen this error in the logs. Really appreciate your help.
SIncerely,
Ria

Hello Rai,
CO028 Backward scheduling (enter finish date)”
The error occurs if you maintained the scheduling parameters such that scheduling is carried out with the setting "from production dates"
Please check your order type scheduling date OPU3 for your order type and plant combination,
Scheduling type should be Backward
also do not active From Production date tick mark.
Also check the CIF queue in /SAPAPAO/CQ go in details under IT_APOOUT there should be availability date.
Best Regards,
R.Brahmankar

Similar Messages

  • Shopping cart not created, error message 'Error in Transfer'

    Dear Guru's,
    While creating a shopping cart in the product category, the system is giving an error message 'Error in transfer'. We are working in the classic scenario.
    When we check in the table BBP_PDBEI, the logical system shown is SRM system. Ideally, the logical system should be that of the ECC backend system. Could you please help us where we can go wrong in the settings?
    Thanks and regards,
    Ranjan
    Ranjan Sutradhar

    Hi
    Please refer to the below links
    http://wiki.sdn.sap.com/wiki/display/SRM/TransferprocessoftheShopping+Cart
    http://wiki.sdn.sap.com/wiki/display/SRM/Follow-ondocumentdetermination%28PR%2CPO%2CRS%29
    Hopefully this would resolve your problem.
    Thanks,
    Ashish

  • PO Error in Transfer for Direct Procurment

    Hi All,
    we are running SRM 550 and are at SP15.
    We need to get SRM to order Direct Materials for a storage location in our ECC system.
    So far all the config has been done,  materials transferred, storage locations defined in Org structure extended attributes.
    Problem is when I create a PO from a SC for direct materials I get an Error in Transfer and the error in RZ20 says that the account assignment is not valid for the ECC PO doc type.
    This all used to work in 2008 when we went live wih SRM but direct procurment was switched off because the business did not need it.
    In PPB_PD for the PO there is no account assignment data so I think this is where I have a problem.
    I must be missing some small piece of config somewhere that provides the account assignment GL for direct procurment but I can't find it.
    Any suggestions would be welcome.
    Thanks in advance
    Allen

    Hi Allen,
    Please create wildcard entries for AccAssCat in IMG  table               
    V_BBP_DET_ACCT, details see encl. file V_BBP_DET_ACCT.DOC                                                
    The issue is that even for subtype DP Direct Procurement Account         
    Assignment Category must exist, otherwise PO cannot be transferred       
    Accounting is going to be eliminiated one step later after ordering,     
    in background task, not visible to the user. Please realize!
    I have uploaded V_BBP_DET_ACCT.DOC to SAPMATS, click on the following link.                                               
    Link: [https://sapmats-de.sap-ag.de/download/download.cgi?id=LL0BCK4LD9DE7XZOG9M7WGGNG11AWE43UCBMUW1T05TKD1IOK2]
    Hope this helps,
    Kind Regards,
    Matthew

  • Error when transported to prod 0VTYPE_TEXT

    Hi exp,
    I got the following error when transported to prod 0VTYPE_TEXT
    Transaction 0FZBH7S1AB8H7ZZZZWGAOBGWG2HCBX5T is inactive (cannot be executed)
    Message no. RSTRAN715
    Diagnosis
    The transformation 0FZBH7S1AB8H7ZZZZWGAOBGWG2HCBX5T is inactive (not executable).
    This can be caused, for example, by a change made to the source object or target object of the transformation.
    The transformation connects the source  to the target .
    Procedure
    The transformation must be reactivated.
    so i tried to activate the trasformation in dev and transported,
    now i got the following error
    Target RSDS 0VTYPE_TEXT ECPCLNT118 is not allowed
    Message no. RSTRAN802
    can advice
    kris...

    Hi Meera, shashank,ashish,
    i have an inactive RSDS 0VTYPE_TEXT ECPCLNT118 -> IOBJ 0VTYPE in BI prod
    data source 0VTYPE_TEXT is been activated in R/3 SS and replicated  to BIP as well and its active
    when i tried to delete Transformations and DTP, the trnsport req failed with errors throw the message
    PSA /BIC/B0000649 does not exist in log.
    i observe that even though request failed with errors, DTP still deleted but not transformations.
    one thing i found,
    I wont be able to find 0VTYPE_TEXT (Value Type for Reporting (Texts)) under the info object 0VTYPE.
    is this error cause?
    i did collected all objects and transported, still errors throwing the folling messages
    No rule exists
    Target RSDS 0VTYPE_TEXT ECPCLNT118 is not allowed
    Transaction 0FZBH7S1AB8H7ZZZZWGAOBGWG2HCBX5T is inactive (cannot be executed)
    Error saving Data Transfer Process DTP_D5R4V8ZJAVNAOZTO2Z9J1JTCI
    thank you for advice,
    krish...

  • Error during Upgrade from 4.6c to ECC 6.0

    Hi All,
      We are facing an error when upgrading from 4.6c to ECC 6.0. We are facing this error on the table COEP - runtime object inconsistancy. What we found is there is ERP upgrade has created new extra fields in the table. In log file the error is specified as : Duplicate Field name, But we not able to find the duplicate field name in the table.  Please kindly help as early as possible. The upgrade process is stuck.
    Regards
    Anil Kumar K

    Hi Anil,
    Is this issue fixed? Can i know how you fixed it?
    replied to your message Re: How to adopt the index changes during upgrade.
    Thanks,
    Somar

  • Transfer material type DIEN in ECC system to CRM product type Service

    Hi Experts,
    I have a requirement to transfer material type DIEN in ECC system to CRM product type Service.
    How can we do this?

    Hi Viswanath,
       I dont think its possible to replicate material type DIEN from ECC to CRM Service Product.
       Service Products need to created in CRM, from here transfer to ERP. To transfer service product from CRM to ECC, you need to enable upload for Service Product in SPRO.
           Customer Relationship Management -->
                 Master Data -->
                        Products -->
                            Settings for Product Type -->
                                    Allow Upload for a Product Type.
       Now here select the check box for product type 02(service).
      To send product from CRM to ECC, open the product you need to send it to ECC in COMMPR01.
             Go To -> Transfer to ERP. Here give the ECCRFC Destination and mapping material type.
    //Bhanu

  • Error during transfer of tax Condition JIN1

    Dear All,
    As I create a Sales Order with ref. to Quotation,I get a message in the status Bar mentioned in the Subject line.
    Condition type JIN1 is not maintained in the Sales Document Pricing Procedure but mentioned in the Tax procedure.
    Detailed Error Description:-
    Error during transfer of tax condition JIN1
    Message no. VH807
    Diagnosis
    A condition type is found in the tax determination procedure, which is not available in the current document pricing procedure.
    If I see the JIN1 condition Type detail in the sales order,there is an added option in Control data :- X (Inactive via formulae of incorrect).
    Kindly suggest.
    Best Regards,
    Ankur

    Check in your pricing procedure, whether you have maintained this condition type.  Next check in FTXP whether you have maintained the required percentage against this condition type
    Incidentally, if you are in ECC6, condition type for CST is JIN7 and not JIN1 in which case, check in V/07 and select MWST
    thanks
    G. Lakshmipathi

  • "Error during transfer of tax condition AP4E"

    Hi Guys
    Please help me with the above error log.
    "error during transfer of tax condition AP4E"
    I came across this error whiles trying to create an order.
    How do i resolve this.
    Cheers.

    Hi there
    Include condition type AP4E in the Pricing Procedure .actually this is hapenning when the values of AP4E are flowing from the Tax Procedure to your Pricing Procedure. And in the tax procedure this condition type would be there and in the pricing procedure it might not,
    So please check and maintain that as required.....
    Thanks,
    Raja

  • Im trying to publish a web gallery to BC, my settings seem correct but I'm still getting an  error: FTP transfer failed ' unknown error'. Techs on BC, say FTP working fine. Please help!

    Hey peeps,
    Im trying to publish a web gallery to be hosted on BC. Despite having what seem the correct settings im getting an error: FTP transfer failed ' unknown message'. Have checked with techs on BC. They say FTP working fine that end.
    Any suggestions?

    Have you tried connecting to another FTP server in Lightroom?
    For example, if you get a free Flickr account, can you login to it and upload a file to it?
    If you can't upload to any server, then you have a general FTP-in-Lr problem, but if problem is only with BC then, well, it's time to start scrutinizing the BC settings..
    PS - All my FTP'ing plugins have an enhanced FTP settings test feature designed to help you debug FTP settings, so another option is to download one of them, for example:
    robcole.com - FTPAggregator
    and experiment with settings tester:
    To get here, you have to click 'View / Edit Additional Settings' (in plugin manager), then choose 'New' or 'Edit' from 'Sync Pairs' drop-down menu.
    If test is unsuccessful, enable verbose logging (top section of plugin manager), and review the log file after test, or send to me.
    If you have a problem running plugin, please contact me directly:
    robcole.com - Contact Me
    Rob

  • PO status "Error in Transfer" but PO mail triggred to vendor

    Hi,
    We are using SRM 4.0 extended classic scenario (SP07).
    Apparently PO goes in "Error in transfer" status & it is not replicated into R/3 however in the mean time PO mail gets triggered to vendor & Vendor receives a PO copy mail in his inbox.
    According to me it's very strange behavior.
    Has anybody come across any such behavior before?
    Any help is appreciated & awarded with full points.
    BR
    Bharat M

    Okay..according to you this is a standard behavior of a SRM system. Once PO is created & ordered on SRM , it will always triggered to Vendor. It has nothing to do with whether PO reached to R/3 or not.
    I checked the log in Application monitoring & also on RZ20. It says that "No account assignment exists for service line 0000 000001" however Line item 1 is actually deleted in the PO.
    We have many such cases of PO's where PO status is "Error in transfer" & application monitoring gives a error log about item which are actually deleted from the PO.
    What could be the problem?
    BR
    Bharat M

  • Errors in alert log PROD

    Dear all,
    Oracle 10.2 on AIX 5.3
    I am getting these errors in my alert log.
    ORA-12012: error on auto execute of job 42568
    ORA-04063: ORA-04063: package body "EXFSYS.DBMS_RLMGR_DR" has errors
    ORA-06508: PL/SQL: could not find program unit being called: "EXFSYS.DBMS_RLMGR_DR"
    I first uninstalled the EXFSYS schema and then installed it again. Then I tried to install the Rule Manager. and I get another error
    SQL> @ ?/rdbms/admin/catrul.sql
    begin
    ERROR at line 1:
    ORA-20000: XDB component not found. XDB should be installed prior to Rules
    Manager installation.
    ORA-06512: at line 3
    How can I install XDB component. Please help

    Maybe due to forum bug, thisthread is duplicate :
    Errors in alert log PROD
    Nicolas.

  • Sale order - mtrl - prod ord ; table link

    hi,
    pl tell me a link through table and field -
    how to get a link between sale ord - item no. - mtrl - prodn ord no. - prodn posted qty.
    regards

    I have an understanding that you are in need of the tables for mat.no,prod.ord.and sales order to make a report to make them all appear in the report...
    If that is so,there is no need for tables..YOu can get that in standard SAP..
    Go to COOIS..enter the plant and execute.. In the resulting screen, go to chane layout. There u can add the sales order in the layout...material and production order will be there by default...
    Thus you can have the material,production order and the corresponding sales order in a single transaction...
    hope this clarifies...
    karthick

  • Delivery Note to Subcontract creation error "Essential transfer parameters

    Hi
    I am facing issue in return delivey
    Delivery Note to Subcontract creation error "Essential transfer parameters are missing in record:000001".
    Could you please let me know the casue of this error and where exactly i can see error.
    Regards
    vikcy

    Hi Vicky,
                   Check If the Customer number(Plant) has been maintained in the vendor master record control data and the vendor should also be maintained in the customer master data. Once you maintain this system determines the shipping point based on the  customer master and the shipping data missing. Kindly try delivering after maintaining these and let me know If you need any more information on this.
    Regards
    Ram Pedarla

  • Error message "Transfer date 30.06.2007 is more than one year after the clo

    Hi SAP expert,
    I received error message "Transfer date 30.06.2007 is more than one year after the closed fiscal year" - message number AC 187. Used Tcode OAAQ when tried to reverse year end closing for depreciation area. How can i correct this problem? I want to finish for the whole year 2007 depreciation.
    Hope u guys can help me. Thanking u in advance.
    Regards,
    Nazrul

    Hi SAP experts,
    any solution for my porblem?
    TQ

  • Error in Initial Load of Products from ECC to CRM

    Hi ,
        Im getting below errors In initial load of MATERIAL from ECC to CRM.
    <b>Data cannot be maintained for set type COMM_PR_MAT
    Data cannot be maintained for set type COMM_PR_UNIT
    Data cannot be maintained for set type COMM_PR_SHTEXT</b>
    <b>My Analysis is</b> 
      I found these set types are already assigned in other base category and around 100+ materials are created using this base category.
      After initial load of DNL_CUST_PROD1, i found these set types are not assigned to any of the categories of hierarchy R3PRODSTYP. Since R3PRODSTYP is not having above set types, my initial load is failing.
    <b>Required Solution</b>
      Is there any other way, I can download materials from ECC to CRM, with out deleting the existing materials and Z hierarchy created earlier from CRM.
    Regards,
    Prasad
    Message was edited by:
            SAP CRM

    Hi there,
    Try to attach the Set Types:
    "COMM_PR_MAT", "COMM_PR_UNIT", "COMM_PR_SHTEXT", COMM_PR_BATCH, COMM_PR_LGTEXT, COMM_PR_LGTEXT1,COMM_PR_LGTEXT2,
    to the Category "MAT_" and then run the Initial load again.
    It should work now unless you have some other issues.
    Best regards,
    Pankaj S.

Maybe you are looking for