Error in transfer structure while activating the business content
Hi all
we got the following error while activating the transfer rules( business content) :
1)error when determining a number from object BI_TSDTEL and number 01
2) object name can only contain characters from syntactical character set.
3) data element for infoobject WAERS 0CURRENCY could not be created.
can anyone please explain what is this error.
Hello Tilak,
Goto SE37 -> RSAR_TRANSTRUCTURE_ACTIVATE -> Transfer Structure Name -> Execute
If the above doesn't fix then try the below
Goto SE14 -> Transfer Structure Name -> Adjust and activate .
This will fix if there is any inconsistency in the transfer structure.
[Thanks|http://chandranonline.blogspot.com/]
[Chandran|http://chandranonline.blogspot.com/]
Similar Messages
-
ERROR while activating the Business Content of Sales Cube 0SD_C03
Hi,
iam facing an error, iam getting the error while activating the Business Content sales info cube and Inventory info cube with the collection option DATA FLOW BEFORE. In my system the service pack was 14, what shall be the approach. Here iam getting the error like some 0DB-- objects are not available in the D version. if u have any solution for this please share with use also.
Please treat this as an urgent, because we are unable to proceed with the further Business Content Activation.
Thanks,
Prabhakar.Hi Raj,
I have searched for those objects in the BI content for activating those objects, but those objects are not available in the BI content.
In general while activating the info cube if any object is in inactive means we will activate the object seperatly and we will activate the info cube it will resolve the issue. but here those 0DB-- objects are not available in the BI content.
While activating the sales and inventory info cube it was throughing the short dump, In the short dump it is showing these message.
ASSIGN_LENGTH_0 " "
SAPLSNR3 or "LSNR3F01"
LOCAL_BUFFER
please treat this as urgent.
Thanks
Prabhakar. -
Error while activating the business content object
Hi guru,
We have installed a new BI system, and hence we need to activate all the business content object as they are available in delivery version.
So as there was an requirement i tryed to activate the business content object ,that is 0mat (MATNR) material number,
but once done with the installation when i try to find the object and display it
that is i select the object 0mat , context menu and say display or change it does not show the complete screen as it appears for a characterstic and gives a error
"_settings for material number conversion not found"_*
so please help me out what is the problem
ThanksThanks Subash Balakrishnan for replying,
but let me inform you that i already did that as i need to install this object and now the object is showing with green instead of grey,
Now my problem is that after selecting grouping and collection when i go to infoobject menu under modelling and find out the object 0mat, it shows in green , but as i need to observe the properties of this object like data type , length etc , i select the object 0mat and right click and select display,
then instead of showing me the object properties screen it gives me the error as mentioned above,
so as you say it has to be in active versoin , but i can not view the normal screen which appears after creating any object ,
now i hope my problem is quiet explanatory so please help me.
Thanks -
Error while activating the Business Content
Hi BI gurus,
I am installing the business content for the sales overview infocube with the grouping option data flow before and install in back ground option. The back ground job is cancelled with the error msg"STDO: Log could not be written on output device T" and at the end it shows ABAP/4 processor: LOAD_PROGRAM_LOST error.
Can any one give solution for this. This is very urgent,
With Regards,
Balachander.SAnd also check whether there are any dumps in ST22.
Khaja -
Error in Activating the Business Content Infocube 0CRM_C08
Hi Experts,
when iam trying to activating the business content infocube 0CRM_C08
iam getting few errors
Error-1:- Characteristic 0COUNTY_CDE is still being used as target of transfer rule ZCOUNTY_TEXT
Error-2:- Char. 0CRM_OBTYP3 is exclusively an attribute (cannot be a navigation attribute)
Error-3:- Authorization field CRM_SALORG still being used in authorization objects
Error-4:- Cannot delete authorization field of InfoObject 0CRM_SALORG
Error-5:- InfoObject ZDGTDCODE is used in transfer rules (1CL_OMAT001_BB) of characteristic 0MATERIA
Can anyone please clarify regarding these kind of errors.
What i have to do for make a successfull activation
Thanks in Advance
ARUNHi Raj,
I have searched for those objects in the BI content for activating those objects, but those objects are not available in the BI content.
In general while activating the info cube if any object is in inactive means we will activate the object seperatly and we will activate the info cube it will resolve the issue. but here those 0DB-- objects are not available in the BI content.
While activating the sales and inventory info cube it was throughing the short dump, In the short dump it is showing these message.
ASSIGN_LENGTH_0 " "
SAPLSNR3 or "LSNR3F01"
LOCAL_BUFFER
please treat this as urgent.
Thanks
Prabhakar. -
Errors while transporting the Business Content
hi all,
we are facing a few problems while transporting the Business Content from the Development systems to the Quality System.
it says Method Execution - Action Cancelled.
am pasting a part of the error messages also... kindly have a look at it and get back to us at the earliest as we are in the process of going-live...
Start of the after-import method for object type R3TR IOBJ (Activation Mode)
Interval 01 of number range RS_OBJNUMG is missing > Long text
Interval 01 of number range RS_OBJNUMG is missing > Long text
Interval 01 of number range RS_OBJNUMG is missing > Long text
Interval 01 of number range RS_OBJNUMG is missing > Long text
Interval 01 of number range RS_OBJNUMG is missing > Long text
Interval 01 of number range RS_OBJNUMG is missing > Long text
Interval 01 of number range RS_OBJNUMG is missing > Long text
Interval 01 of number range RS_OBJNUMG is missing > Long text
Interval 01 of number range RS_OBJNUMG is missing > Long text
Interval 01 of number range RS_OBJNUMG is missing > Long text
Interval 01 of number range RS_OBJNUMG is missing > Long text
InfoObject 0ACN_CATGRY (in compound of characteristic 0ACN_EANUPC) not (act.) available
Attribute 0ACN_BRAND from characteristic 0ACN_EANUPC not (actively) available
Attribute 0ACN_DEAL from characteristic 0ACN_EANUPC not (actively) available
Attribute 0ACN_BRAND from characteristic 0ACN_EANUPC not (actively) available
Errors occurred during post-handling RS_AFTER_IMPORT for UPDR L
The errors affect the following components:
BW-WHM (Warehouse Management)
Ended with return code: ===> 12 <===
please revert bact at the earliest....
Thanks
Manickshi Manicks,
check if oss note 903291 helps
Transporting DataSources
Transport problem ...Urgent
Transport Issue
Number range object missing NRIV and cant activate IOBJ during import
try transaction rsrv ? >> all elementry tests >> master data >> compare number range and maximum sid >> execute. press button 'correct error' if any error exists.
also try >> all combined tests >> master data >> check master data for characteristics.
or run program RSDG_OBJNUMG_CREATE_INTERVAL
have a try oss note 903291 ?
Manual solution
Get the name of the number range object from the error message shown above, for example, RS_OBJNUMG. Start Transaction SNRO. To display the intervals, use the number range function key and enter the name of the number range object as the object name. Change the intervals. The following from-numbers and to-numbers apply:
- RS_OBJNUMG: 0000001 - 9999000
- RSDDAGCUBE: 100000 - 199999
- RSSBRAUTH: 00000001 - 99999999
BW 3.0B
Import Support Package 30 for 3.0B
BW 3.10 Content
Import Support Package 24
BW 3.50
Import Support Package 16
BW 7.0
Import Support Package 07 -
Hi Friends,
I am getting this error while activating the Cube ,I'm not able to see update rules after activated in the Modelling.. My using 7.o but working on 3.x version, with support package 15.
When i stimuldate following are the errors:
80BP_ID not maintained
Data source 0DBDUNS_IMPORT_ATTR not maintained
Error while reading InfoProvider 0SD_O01 etc...
Please help me out from this error since two days i'm tryhing to resolve but i'm not able to activate...Hello,
Go to business content, select the Infoprovider which you intend to install, select the before after option. Then say install & ignore the warnings & say yes. If still you are not able to view the update & transfer rules there might be some issues in the source system.
1] Check in rsa 6 that the datasources feeding to your cube are avialable or not.
2] Check the same is been replicated in BW or not.
3] The time stamp from both source system & BW system should match, otherwise replicate it again.
Hope this helps.
Regards,
Atul... -
Error while activating PM Business Content DSO 0PM_DS01
I am trying to activate the Business Content for PM (Plant Maintenance). I wasable to activate the cubes without any problem.
But when I tried activating the DSO 0PM_DS01, the installation is failing while activating the DSO with the message. "You are not authorised for Infosource 80PM_DS01"
Has anybody else also faced a similar error?
TIA
AbhishekHi,
Please stop posting multiple threads for the same post :
Unable to activate the DSO in PM Business Content
Suggest you close out one thread and just keep one active.
Cheers,
Kedar -
Error InfoObject inactive while activation of Business content for cube
I am facing error "InfoObject 0COMP_CODE is not available in active version" while simulate installation of business content of cube 0FIGL_C10. Please guide me for the same.
Edited by: Nilesh Vakil on Jul 15, 2010 1:07 PMHi Sriniva and All,
I have been trying to activate business content- info objects catalogue, and have been gettin the below errors. I have activated ocomp-code and checked it with transaction sm37, and it says the job has finished.But i am not sure if i have to activate all the info objects thereof one by one.
EDI: Partner profile not available 1
Source system E33CLNT003: No authorization for remote activation of DataSources
Source system T90CLNT090 is inactive
Object '0CUSTOMER_ATTR BM_GIS_DAT' (ISMP) of type 'Transfer
Rules' is not a
I hope to hearing from someone soon !
-- Armstrong Kwakye -
Error while installing the Business Content 2lis_03_bf Transformation
Hi,
I have installed total 0ic_c03 cube and successful.
Data is populating correct. When ever Releasing the Request error getting which Local objects not captured in request which are there in 2lis_03_bf info source, For this Error I have deleted the objects from info source and activated and activated transformation. But those object are there in the ROUTINES and disturbed. KEYFIGURES Routine are disappeared.
Again when have installing the BF infosource and transformations from Business content is getting below error. for Ref below screen shot.
Please advise me : urgent
Thanks & Regards,
Srinu.RapoluHi,
it seems like issue with ABAP routine.
Can you try to get detail error by doing syntax check.
Also if you are in BW 7.31 - I notices while releasing it shows error. I will suggest ignore it and just released. it worked for me.
You always have option to recapture the transport and resend the same objects, if earlier failed.
Thank-You.
Regards,
VB -
Error While Installing the Business Content Query
Dear Friends,
We are in BI 7.0 and trying to install a business content query "Balance Sheets Profit and Loss Statement" but while activating we are getting the error that some Particular Request has not been found or not suitable. we checked for that request in SE09 and found that there is no such request existing in the system. So what could be the cause of the Error and what to do for successfully Installing the Query.
Thanks ..
AnuragAre you assigning a new request or creating a new one? Try to assign to a new request if you are not doing so.
Thanks
Wind -
Error in END ROUTINE while activating the transformation.
Hi ALL,
While writing an END ROUTINE IN BI, I got no error while saving the code.
But when Activate the Transformation I got the following Error.
" Syntax Error in GP_ERR_RSTRAN_MASTER_TMPL,row 54(->long text)
Diagnosis:Component called CRM_OBJ_ID already exits "
I have used the above object in the transformation.
Please help me debug the error or highlight on it.Hi,
i guess u have create two object with same variable name.check.
regards,
rakesh -
Error during activation of business content
Hi
I am facing problems during the activation of the standard business content.
I am trying to activate the infocube 0ic_c03 material stock movement. We are using BW version 3.5 patch level 13.
while activating the business content and using the grouping "in data flow before" there are several errors which come up during the simulation install such as
infoobject XXX is not available in version A
Error when reading data target XXXX
Data source XX not mantained
Key figure XXX is not available in version D
In order to avoid activating pre-installed objects i have deselected them.
I am in urgent need of some help. So any ideas that will help to resolve my problem are assured of being rewarded handsomely!!
thanks in advance!Hi Everyone!
Thanks the responses have been encouraging and i do see a glimmer of hope
since i am fairly new at this I wanted to know
1. does it make sense to install (or activate) the infoobjects which are shown as not available in version A individually and then trying the install of the infocube. It does remove the errors associated with the infoObject as i saw with one infoobject. Does this have any other impact
2. For the data sources i went to rsa5 on the source r3 system. but the data sources listed in the errors were not found (the data source errors that are shown are of the type 0DBDUNS_IMPORT_XXX). Also it is my understanding that the data sources that are required for the inventory cube are 2lis_03_bx , 2lis_03_bf and 2lis_03_um. Is this correct? I do not see them indicated in these errors. What do i do once i am in rsa5 and i select these datasources?
thanks in advance! -
Package Check Error while activating the Appended Structure
Hi CRM Gurus,
A structure is appended to a standard structure. while activating the appended structure its throwing Error called-
<b>Package Check for Table/Structure ZCDPR_BW_BUPA_LINKS</b> .
<b>The object TABL ZCDPR_BW_BUPA_LINKS uses SQLT DPR_BW_BUPA_LINKS</b>.
plz help me to get the solution in this regard.
Regards,
GokilaHi
were you able to solve your problem?
If so please update us. We are also facing same issue while activating the table.
let us know the solution if you have solved the problem that will help us a lot.
Thanks and regards,
Amit -
Failure while activating the transfer rules
Hi,
While activating the transfer rules, in that process when the system is trying to activating the transfer structure an error is occuring.
Following is the error log.
FREELISTS 004
FREELIST GROUPS 01)
PARTITION BY RANGE (PARTNO)
PARTITION "/BIC/B00077630000000000002" VALUES LESS THAN
(0000000002))
ORA-00604: error occurred at recursive SQL level 1 ORA-01654: unable to extend index SYS.I_CON1 by 1
DDL time(___1): .......167 milliseconds
The SQL statement was not executed
Table /BIC/B0007763000 (Error adjusting the database)
Table /BIC/B0007763000 was not activated
Obj_act >>(___1): ..00:00:01 hh:mm:ss
Following is the log from System Log(SM21) for the same
BY2 Database error 604 at EXE
BY0 > ORA-00604: error occurred at recursive SQL level 1#ORA-01654
BY0 > unable to extend index SYS.I_CON1 by 1065 in tablespace SYST
BY2 Database error 604 at EXE
Every time when I try to activate the transfer rules, it generates a new table "/BIC/B000xxxxxxx".
Let me know if any more details required.
Though there is a SAP Notes(513758) with Symptom which is same as our problem, its of not much use. It only says search for other SAP Notes with KeyWords from error log. We couldn't find a relavant SAP Notes sofar.
Please guide us in resolving the issue.Hi Aswani,
To further prevent this from occuring, you should assign a BASIS person to monitor the BW system using tcode <b>DB02</b> and watch out for critical objects prior loading process. That way, this error could have been prevented.
You can also device a way to predict which table spaces are needed to adjusted on a scheduled basis based on your actual data growth.
--Jkyle
Maybe you are looking for
-
Best export format for viewing on external TV?
I have a small project that I'd like to show via hooking my laptop up to a TV. What's the best Quicktime format/setting for exporting for doing this? Any suggestions? Thanks, Kristin.
-
Change visibility of tabstrip at runtime
Hi, I bind a context node attribute to the visible attribute of a tab to control its visibility. The type of the node attribute is WDUI_VISIBILITY and the default value is 01. However, the tab is always present. It should be invisible initially. Best
-
I have been a Verizon customer for 6 years now and I am just fed up with my high bills. I am on the Edge program with my LG G3, if I just want to switch to Sprint(for the unlimited data), all I have to do is buyout my contract right? Can someone plea
-
Adjusting Oracle Parameters in pure Java DB
Hi people, I´ve installed a java instance with oracle DB. In the post-installation steps, there are the oracle adjusting parameters. For to execute the script for view the several parameters in this database it´s only possible via sqlplus? More thank
-
RE: Start-up disc full!
I am receiving msg. "start up disc full" and am unable to do updates, download i-tune purchases, etc.... I went into finder and did the command i on "library". Looks like this is my problem. Any suggestions on how to clean it out? Thx!