Error in transferring mu
Everytime I transfer songs, it says that there is an error in transferring the songs. Some songs will go on and won't. I'm using creative media source. i tried to make folders to set the music up but it will only let me set up one folder.
Its not giving me a error code.
kcb22:
If you have already put a lot of files into the top-level (root) folder then you will not be able to create additional sub-folders. Delete some or all of your songs first from the player, create a folder structure and then put your songs back on, this time into the folders. You can get away with just one subfolder, called Music (or whatever) with all of your files in this folder.
I think I'm right in saying that the Muvo TX FM can only see down to the level of one subfolder; if you go deeper than this then the songs will not be seen bu the player.
PB
Similar Messages
-
Commit error while transferring Sales order Document to GTS
Hello,
We faced a transfer error while transferring sales order document to GTS.
When I debugged the code function /SAPSLL/API_6800_SYNCH is called. In this function, /SAPSLL/CUHD_MAINTAIN_SINGLE is called with parameter lv_no_commit = 'X'. When I checked why its value is 'X', I saw that if the RFC destination and the current system are the same, then lv_no_commit = 'X', (means if the R3 and the GTS are in the same server, same client.) In debug mode I set the value of lv_no_commit to space, and then it works. It creates the GTS document.
We are also transferring billing documents and it works fine. When I checked what is the difference between transferring sales order document and transferring Billing document, I saw that in the transferring billing document there is another function is called /SAPSLL/API_6800_CSD_SYNCH, and it's calling parameters(in background, as seperate unit) are different from calling parameters of /SAPSLL/API_6800_SYNCH. You can see the difference below.
For sales document transfer :
CALL FUNCTION '/SAPSLL/API_6800_SYNCH'
DESTINATION cs_transfer-rfc_dest
For billing document transfer :
CALL FUNCTION '/SAPSLL/API_6800_CSD_SYNCH'
IN BACKGROUND TASK
DESTINATION cs_transfer-rfc_dest
AS SEPARATE UNIT
So my question is, do you think is it a sap standard program error, or is there any suitable settings in the customizing or SM59 to fix this error?
Thanks in advance
Serhat
Edited by: Serhat Dirihan on Jan 22, 2009 11:46 AMDear Serhat,
I don't think this is an RFC problem or an error. But you wrote:
When I checked why its value is 'X', I saw that if the RFC destination and the current system are the same, then lv_no_commit = 'X', (means if the R3 and the GTS are in the same server, same client.)
It is impossible to have GTS and R/3 on the same system and same client. At least the client should be different. So try to check why the call is performed like that.
Balazs -
Error while transferring Forwarding settlement document to ERP Billing
Hi Experts,
My forwarding settlement document is consistent.
All the basic customizing in SAP ERP, TM has been completed as follows, but getting error while transferring forwarding settlement document to ERP billing (Ref. 1st screenshot).
I am using SAVE AND TRANSFER button to send the document to ERP, also same error is displaying while using PREVIEW INVOICE button (Ref.2nd screenshot)
Please suggest if I missed anything to send forwarding settlement document to ERP.
Customizing settings for transferring Forwarding settlement document to SAP ERP.
1. In SD Billing all condition types has been maintained, pricing procedure determination configured.
2. In SAP ERP SD condition types mapped to TM charge types using following path.
Integration with other sap components - Transportation management - Invoice integration - Billing - Definition for transportation charge elements - Define charge types.
3. Assignment of charge types in ERPSD
4. Define charge category, subcategory codes
5. Mapped ERP SD, TM sales organization with logical TM system, sales area, Order type, Billing type, Pricing procedure
6. Output types determination configured for ERP Billing in SDDear Serhat,
I don't think this is an RFC problem or an error. But you wrote:
When I checked why its value is 'X', I saw that if the RFC destination and the current system are the same, then lv_no_commit = 'X', (means if the R3 and the GTS are in the same server, same client.)
It is impossible to have GTS and R/3 on the same system and same client. At least the client should be different. So try to check why the call is performed like that.
Balazs -
Error while transferring file :: Error while issuing ssh command.
Hi All,
I am having a JSP based website application.
I am getting the following exception in my logs.
[ERROR] 05/04/2007 03:43:44 - Error while transferring file :: Error while issuing ssh command.
java.net.ConnectException: Connection timed out
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:305)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:171)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:158)
at java.net.Socket.connect(Socket.java:464)
at java.net.Socket.connect(Socket.java:414)
at java.net.Socket.<init>(Socket.java:310)
at java.net.Socket.<init>(Socket.java:125)
at com.sshtools.j2ssh.net.SocketTransportProvider.<init>(Unknown Source)
at com.sshtools.j2ssh.net.TransportProviderFactory.connectTransportProvider(Unknown Source)
at com.sshtools.j2ssh.SshClient.connect(Unknown Source)
at com.sshtools.j2ssh.SshClient.connect(Unknown Source)
at com.sshtools.j2ssh.SshClient.connect(Unknown Source)
at com.novartis.util.DataExporter.transportFile(DataExporter.java:127)
at com.novartis.util.DataExporter.export(DataExporter.java:101)
at com.novartis.businessmanagers.SandosSignupManagerPojoImpl.export(SandosSignupManagerPojoImpl.java:103)
at com.novartis.util.DataExportJob.process(DataExportJob.java:48)
at com.novartis.util.ExclusiveJob.execute(ExclusiveJob.java:35)
at org.quartz.core.JobRunShell.run(JobRunShell.java:191)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:516)Any help would be appreciated.
Thanks.This means that the SSH server you're trying to connect to isn't listening. Is the SSH server running? Are you trying to connect to the right machine?
-
Error in transferring results of assembly order
hi, all,
i'd like to ask for assistance with the error i got during VA02 transaction. when i did check availability/delivery proposal, i encountered this error on one of the line items.
Error in transferring results of assembly order
thanks in advance.Hi Gurus,
Have anyone found solution for this problem?
Thanks,
Tanveer -
CIF Error while transferring vendor
We are facing CIF error while transferring vendor master to APO.
The issue is in e-mail address of the vendor master.
One way is to correct the e-mail addresses - one per line without semicolon at the end.
But the issue list is very huge to get it corrected.
Is there any other way by which we can exculde the e-mail addresses or its validation?
Thanks and regards,
SushantHi Senthil,
The objective was to avoid CIF error due to incorrect address setup. This required us bypass it before data transfer. We could fix this using enhancement in ECC.
Apreciate your kind reply, though. Thanks a lot.
Warm regards,
Sushant -
Error while transferring materials from R/3 to APO
I am getting an error while transferring materials from R/3 to APO , the error is on the SCM side and its "NOEXEC" , the inbound queue has been blocked . what might be the problem
Hi Raj,
I think that you have RFC problems, you need to check this with your basis team, i give you a thread that talks about the same problem.
Regards.
Marí -
Error when transferring data; communication error when analyzing
Hi,
When I load the data from the SAP CRM source system. Iam getting the following error.
Error when transferring data; communication error when analyzing
Diagnosis
Data Packets or Info Packets are missing in BW, but there were - as far as can be seen - no processing errors in the source system. It is
therefore probable that an error arose in the data transfer.
With the analysis an attempt was made to read the ALE outbox of the source system, which lead to error .
It is possible that no connection exists to the source system.
Procedure
Check the TRFC overview in the source system.
Check the connection of the source system for errors and check the
authorizations and profiles of the remote user in both the BW and
source systems.
Check th ALE outbox of the source system for IDocs that have not been
Can anyone guide me on this.
Thanks in Advance
Varunok here's a development..when i logged in the source system to check the job...it says the job defn is incomplete. The description says:
Definition for job ARFC:SYSLOAD1C800CRMREMOTE is incomplete. Job cannot be released
Can anyone give an insight on it.
Any kind of input will be appreciated.
Regards
Varun -
Error refresh transfering to PC Suite 6.81 rel 13
Atenttion!
Error refresh transfering to PC Suite 6.81 rel 13 for Nokia 6021. My phone turn off short. My phone is connection via Bluetooth.
PC Suite 6.81 rel. 13 don't work correctly.
PC Suite 6.80 rel. 22 is all rights. It work correctly.Hi,
Files of around 3.5-4Mb play OK. The files that don't play are around 8-10Mb.
Yes, it's Nokia Music Manager I'm using.
Haven't tried moving it without converting - will try this.
When I say it plays but no sounds, what I mean is the music player comes up with the track apparently playing (i.e. all of the controls are there and the progress bar and time move as if the track is playing) but there is no sound. -
Error while transfering Value of SY-TABIX to a variable ?
Hi,
As per my req , i have code like this .
{{ Data : idx3 type sy-tabix .}
{READ TABLE ITAB2 with key----
{ if sy-subrc = 0 .
idx3 = sy-tabix .
DELETE i_sort INDEX idx3 .
endif .}
clear idx3 .}
but it gets sortdumb ,
While in debugging mode , i checked Sy-Tabix value is 11 suppose , but IDX3 = * ,
The value is not tranferring to idx3,
But its working fine for other records .??
so what is the root cause of this kind of error , ??Hi all,
I solved it ,
Actuaally the problem was here .
Data : idx1 , idx2 type sy-tabix.
so system was considerings idx1 as char type ,length 1. and when after READ statement i transfered the value of sy-tabix to idx1 , if sy-tabix value is <= 9 , then IDX1 contains that value, but if SY-TABIX is 2 character , it cud nt transfer the value to IDX1 .
so it was getting sort dumb.
I declared like this .
Data : idx1 type sy-tabix,
idx2 type sy-tabix. now its fine
Anyways thanks to all for your help -
Error while transferring the document
Hi Friends,
We are getting an Error when we try to create a service confirmation.The error is an 'Error has occurred while transferring the document'.When we see in the transmission log it is telling inconsistent update flags.
How can the error be removed?
Regards,
Jay.Hi Jay,
Try doing this once again and go to Tcode SMW01 and try to locate your Bdoc. First it will be in yellow state and it will turn red (error).
Once you get the error Bdoc, check the error messages in it (there is proper button on the top to get this). You might get the cuase of the error in Bdoc messages itself.
If not, post me the Bdoc status and the Flow Context.
Regards,
Alin -
BU_RELNR error while transferring a vendor from EBP to SUS
Hi experts,
We have EBP on one client and SUS on abother client on the same server. SRM 5.0 and (srm server 5.5) and XI 7.0 (PI). We could succesfully import the scenario of service procurement with supplier enablement and we are going with Extended classic scenario.
All the XI settings are done properly and we could send the vendors from EBP to XI. there is a problem in the inbound XML messages when it is creating a BP in SUS. The no. ranges are maintained properly in SUS and the No. range Grouping done si fine.
01) We have an error in the SUS in the SXI monitor telling that:
We found the BU_RELNR in the table NRIV is set as external and there is no table maint. for this. We cannot uncheck external indicator.
<?xml version="1.0" encoding="utf-8" ?>
- <nr1:StandardMessageFault xmlns:nr1="http://sap.com/xi/SRM/Basis/Global">
- <standard>
<faultText>An error occured within an XI interface: Exception occurredA:R1:735 -Number range interval 01 for number range object BU_RELNR incorrectly maintain. E:BBP_BUPA:060 -Error while trying to create contact person. Inform system administration Programm: CX_BBP_BD_ERROR===============CP; Include: CX_BBP_BD_ERROR===============CM002; Line: 57</faultText>
</standard>
</nr1:StandardMessageFault
02) We are not using the bidding functionality in EBP as we are going with e-sourcing. Hence, we will have to replicate vendors from R/3 to EBP. We set the standard communication as XML/XI and make as a portal vendor in EBP in manage business partners in the web transaction. Do we need to create contact persons in EBP and then transfer to SUS? Will it send an automatic mail regarding the login details to the user?
03) Or do we need to create contact persons in SUS. Will it send an e-mail to the vendors from SUS?
Thanks in advance,
DVAlex,
The issue to which you have replied is to do with the namespace in XI mappings. The standard content seems to have a bug when it got imported into the configuration.
Coming to the e-sourcing, SAP is giving phase wise integration with ECC and SRM. The roadmap is already SAP has delivered the xi content for E-sourcing to ECC for the master data like Material masters and vendor masters. In general, E-sourcing is a hosted application till now. But, there is an exception for us to have it hosted by ourselves. There are few integration issues in this. But, it is working fine now. Only thing is you need to send the company codes, p orgs, p groups etc... 17 objects I guess before transferring the material master and vendor master from ECC to E-sourcing.
Then, e-sourcing to ECC integration for contracts push, SAP is moving towards ramp-up. This will take some time to have the GA.
Finally, e-sourcing to SRM integration, it will happen (?????????? lot of question marks) in SRM 7.0. Right now, we are planning to have a customer interface from e-sourcing to SRM.
Hope these answers your question.
Regards,
DV -
Error while transfering the data from local to master repository
Hi , Iam Working on SAP Learning Solution Implementation,we are using LSOAE200 as a Authoring Tool. When i am Transfering the Learning Net from the authoring tool to the master repository which is in portal, I am facing the following error:
<b>Type=E, ID=NR, Number=751, Parameter='', Message='For object , number range interval does not exist'
com.sap.hcm.ls.shared.datamodel.ebo.EBOCatalogException: Type=E, ID=NR, Number=751, Parameter='', Message='For object , number range interval does not exist</b>
we are able to make it out that the error is something which is not able to find the number ranges in R/3. Can any one of you please suggest me where exactly to create the number ranges in R/3.
Regards..
KishoreHi,
Please check table T77IV and see whether you haver assigned a number range for the object you want to transfer the data.
Please let me know in case you require any further clarifications.
With Regards,
Kaustuv Goswami. -
Error while transferring agent to agent call
Hi,
when transferring agent to agent call through ICM, i am getting the error. below is the logs for the same.
11:14:39.599 |//SIP/Stack/Error/0x0/DROPPING unregistered header Cisco-Gucid: AF4B8C1E100001346787D3E60A6E0A11|5,100,63,1.1^*^*
11:14:39.599 |//SIP/SIPUdp/wait_UdpDataInd: Incoming SIP UDP message size 1169 from 10.110.10.45:[32796]:
INVITE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP 10.110.10.45:5060;branch=z9hG4bKqnnqtSWNcTnnlzrIB30p3g~~18925612
Via: SIP/2.0/UDP 10.110.10.17:5060;branch=z9hG4bK.Z5FCyzJYgyGTcQKk150og~~182259
Max-Forwards: 68
To: <sip:[email protected];transport=udp>
From: 2960 <sip:[email protected]:5060>;tag=ds620942f7
Contact: <sip:[email protected]:5060;transport=udp>
Expires: 60
Remote-Party-ID: <sip:[email protected]>;party=calling;screen=yes;privacy=off
Call-ID: [email protected]
CSeq: 1 INVITE
Content-Length: 0
User-Agent: CVP 8.0 (1) Build=1440
App-Info: <10.110.10.17:8000:8443>;ringtone=ringback.wav
Call-Info: <sip:10.110.10.196:5060>;purpose=x-cisco-origIP
Date: Thu, 05 Jan 2012 19:14:37 GMT
Supported: timer
Supported: resource-priority
Supported: replaces
Supported: X-cisco-srtp-fallback
Supported: Geolocation
Min-SE: 1800
Allow: INVITE, OPTIONS, INFO, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY
Allow-Events: presence
Cisco-Guid: 2164036096-0000065536-0009543076-3289017866
Session-Expires: 1800
Cisco-Gucid: AF4B8C1E100001346787D3E60A6E0A11
45^*
11:14:39.599 |//SIP/SIPUdp/wait_SdlSPISignal: Outgoing SIP UDP message to 10.110.10.45:[5060]:
SIP/2.0 100 Trying
Via: SIP/2.0/UDP 10.110.10.45:5060;branch=z9hG4bKqnnqtSWNcTnnlzrIB30p3g~~18925612,SIP/2.0/UDP 10.110.10.17:5060;branch=z9hG4bK.Z5FCyzJYgyGTcQKk150og~~182259
From: 2960 <sip:[email protected]:5060>;tag=ds620942f7
To: <sip:[email protected];transport=udp>
Date: Thu, 05 Jan 2012 19:14:39 GMT
Call-ID: [email protected]
CSeq: 1 INVITE
Allow-Events: presence
Content-Length: 0
11:14:39.600 |//SIP/Stack/Info/0xf252a80/Sent an 3456XX Error Response|5,100,214,1.2332234^10.110.10.45^*
11:14:39.600 |//SIP/Stack/States/0xf252a80/0xf252a80 : State change from (STATE_RECD_INVITE, SUBSTATE_NONE) to (STATE_DISCONNECTING, SUBSTATE_NONE)|5,100,214,1.2332234^10.110.10.45^*
11:14:39.600 |//SIP/SIPUdp/wait_SdlSPISignal: Outgoing SIP UDP message to 10.110.10.45:[5060]:
SIP/2.0 503 Service Unavailable
Via: SIP/2.0/UDP 10.110.10.45:5060;branch=z9hG4bKqnnqtSWNcTnnlzrIB30p3g~~18925612,SIP/2.0/UDP 10.110.10.17:5060;branch=z9hG4bK.Z5FCyzJYgyGTcQKk150og~~182259
From: 2960 <sip:[email protected]:5060>;tag=ds620942f7
To: <sip:[email protected];transport=udp>;tag=887062457
Date: Thu, 05 Jan 2012 19:14:39 GMT
Call-ID: [email protected]
CSeq: 1 INVITE
Allow-Events: presence
Warning: 399 us-a-vc-sub3 "Unable to find a device handler for the request received on port 5060 from 10.110.10.17"
Content-Length: 0
11:14:39.605 |EnvProcessUdpHandler::handle_input - handle = 280|*^*^*
11:14:39.605 |EnvProcessUdpHandler::handle_input Status: 0, Id: 0|*^*^*
11:14:39.605 |//SIP/SIPUdp/wait_UdpDataInd: Incoming SIP UDP message size 378 from 10.110.10.45:[32796]:
ACK sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP 10.110.10.45:5060;branch=z9hG4bKqnnqtSWNcTnnlzrIB30p3g~~18925612
Max-Forwards: 70
To: <sip:[email protected];transport=udp>;tag=887062457
From: 2960 <sip:[email protected]:5060>;tag=ds620942f7
Call-ID: [email protected]
CSeq: 1 ACK
Content-Length: 0
attached is the file of ccm logsHi,
What is the version of IOS you are running on the voice gateway? Also, what is happening when you are transfering the call. Is it getting disconnected or... -
Error While Transferring Data rom PSA to Infocube
Hi Experts,
We are Loading Data from (2LIS_11_VAHDR ) From source system .
1. Data Transferred to PSA .
2. Transformation is activated.(mapping based on RSOSFIELDMAP table for transfomation)
3. While Executing DTP we are following Error Messages ,
* R7105 - The Object Name is not allowed to be Empty.
* RSBK241 - Error while updating to target OSD_CO3.
* RSBK229 - Data Package processing terminated.
Note: Even though we are getting error messages the data is transferred to infocube
We Need a Solution for Error ?
Thanks,
All.Hi,
I am also got the same problem long back but i can not remeber exactly but that is problem with transformations in the form of may be for some key figures taht currency units not updating
or some of the fileds to info object transformations , check once again that data element and length of fields and info objects and activate once again, or just delete existed DTP , create new DTP between DS and Info cube and try to load.
Thanks & Regards,
Sathish
Maybe you are looking for
-
No Startup Disc - Blue Screen Error
I recently upgraded my G4 with the leopard operating system. It was running fine for a while and then entered the blue screen problem. I ran into this same problem with my G5 and took the proper steps to try and fix it but have had no luck. I tried t
-
[apple] Just bought/installed MS Office 2011. .docx, etc files still open in Office 2004 apps. Applications menu doesnt seem to let me specify a software version or folder. I can't remove Office 2004 yet, so how do I tell Firefox to now use Office 20
-
Convert URL from integration engine to adapter engine with https
I'm still relatively new at PI, trying to learn as I go, so I apologize if I do not phrase this correctly. Our trading partners currently post xml files via http to a url directed to our Integration Engine, for example: http://<host>:<port>/sap/xi/
-
Illustrator or Photoshop to create web banners?
My company for years has worked with print products. We recently started creating web banners. We use Illustrator for the layout for print and Photoshop for the layout of web products. I have artists who dont see the difference between the two. They
-
Call a form by click a tree node
Hi, How can I created tree and i wanna call form when tree node selected Thank you MNH