Error in Transformation generated by Update rule 0SD_O01 to 0SD_C03

Hello Friends..
I created Update rules from 0SD_O01 to 0SD_C03, and then, generated a transformation to do loads.
But when I do this the following error is happening in my routines
E:The data object "COMM_STRUCTURE" does not have a component called "RATE_TYPE".
Could you help me to solve this?
Thanks and best Regards

Hi,
Follow the steps:
1. Right click on the Cube 0SD_C03 and goto Additional functions->Create update rules.
This option will create update rules from Cube.
2. Enter the DSO name 0SD_O01, in the DSO option box.
This will create your update rules.
If you want to schedule a load from DSO to cube go to tcode RSA12 and search for your DSO 8SD_O01 and create Info Package.
Tip: You can use either Transformations or update rules to update to data targets in 3.5 or 7.0 as well.
If still in doubt just reply.
Cheers,
Satisfied!! Please reward.

Similar Messages

  • Error while transporting Infocube and Update rules

    Hi ,
        My infocube is having warnings for 4 key figures as "InfoCube contains the key figure 0DSCT_PCT1 with the impermissible aggregation NOP" .But when I ma trying to transport I am getting eroors in transport but still The cube got migrated in active form.But the update rules are not getting transported.They show me an error Error when activating update rule 3CFLSNV4LN26C1URF15PR6XSA    ".  This is very urgent for me.
    Can any one help me please.I promise to give reward points.
    Thanks,
    Jyothi.

    Hi,
       My key figures are in active form only.I transported the active keyfigures from development to quality.I am not supposed to make any changes directly in QA .My problem is in transporting update rules.It gives an error message 095 Error when activating update rule "3CFLSNV4LN26C1URF15PR6XSA"
    461 IC="0FIAR_C03" IS="80FIAR_O03" error when checking the update rules
    Errors occurred during post-handling "RS_AFTER_IMPORT" for "ROUT" "L"
    The errors affect the following components:
    "BW-WHM" ("Warehouse Management").

  • Need to create a transformation based on Update Rules Logic

    Hi,
    I have an existing complex Update Rule. I need to manually create a Transformation based on this Update Rule logic. The Start Routine of the Update Rule comprises of:
    1) All data declarations in the Global Area
    2) The local coding area consists of various select statements from various r/3 tables used later for mapping. It also calculates and stores values in the Data Package final internal table for few infoobjects that are not present in the Source object but and are used to populated data in the target.
    3) then we have the various one to one individual Infoobject mappings/constants and many individual infoobject routines that pick result from the comm_structure
    I am not very clear as to where each of the above coding logic should be put in the transformation coding area...... I can see four main coding areas in the transformation....global area, 2nd Global Area, Method Start_Routine and Method Inverse_Start_Routine........... I think the global data declarations(point 1 above) should be put in the Global declaration area of the start routine. The local area of the update rule logic (point 2 above) that contains select statements should be put in 2nd Global part or should it be put in Method Start_routine????? Point 3 above for individual filed mappings will be done through Rule groups. Also can anyone let me know what is the methos inverse_start_routine used for?????
    Thanks.

    Hi,
    Point 1 you mentioned should be put under2nd Global declaration part of start routine.
    Point 2 should be put under Method Start_routine.
    Point 3 as you only mentioned can be done by individual field rule mappings.
    Method inverse_start_routine
          This subroutine needs to be implemented only for direct access
          (for better performance) and for the Report/Report Interface
          (drill through)
    Not very clear though about Inverse routine. But definetly not being used for the case you mentioned.
    Hope it helps.

  • Error in the Business  content  update rules

    hi all,
           I have collected the update rule(0SD_C03<--2LIS_11_VAHDR)  from the business content.When i am trying to install it is popping an error for the update rule.
    The error is
         Object UPDR 250Q6ZPVU4292O59V2VXSY5CA could not be found in version M.
    *     ObjectUpdaterules250Q6ZPVU4292O59V2VXSY5CA: Error installing the Content version*.
    Can anyone give the solution for this issue.Points will be awarded.
    thanks
    Satish

    Hi,
    Try creating manually the update rule.
    Regards
    Rahul Bindroo

  • How-to get transformations from transfer/update rules

    Hi all,
    we did an upgrade to BI 7.0 frm BW 3.5, how shall we get the new things like transformations,DTP for tha already existing cubes/ODS. is there any procedure to convert transfer and update rules to transformation.
    Thanks all,
    Regards

    Migration - Yu may wish to read below steps
    Transformation Rules
    automatic mapping without the use of an Infosource.
    steps are listed below.
    On the InfoSource Tab (Note- Ensure DataSource and Infosource have not been migrated)
    1. Right Click > Additional Functions > Create Transfer Rules
    2. Activate Transfer Rules
    3. Right Click > Additional Functions > Transformation erzeugen
    On the DataSource Tab
    4. Create Transformation (Map to DSO, should map automatically)
    5. Migrate DataSource
    6. Create InfoPackage
    7. Create DTP
    Assessing Migration Scenario's
    Transformation Rules
    Strategy toward new and 3.x datasource / infosource
    Re: Few questions on BC activation..
    Replicate NEW/3.x datasource - Methodology
    Replicate NEW/3.x datasource - Change back to 3.x datasource Methodology
    Re: Datasource Identification
    Hope it Helps
    Chetan
    @CP..

  • Update Rule error while loading the data

    Hello All,
    I tried to do the init load for the datasource 2LIS_02_VAKON (Sales Document Condition), But it error's out in the Update rule saying:
    Short text: Error when generating the update program
    Long Text:  Diagnosis
         An error occurred during program generation for InfoSource 2LIS_11_VAKON
         and InfoProvider 0SD_C15 . This may be extrapolated to incorrect update
         rules.
    Procedure
         Check and correct your update rules and then generate the update program
         again. You can find help on the error in the error log.
    The update rule looks very fine. I even deleted it and re created, but no success..... Please give me your thoughts abt it..... Any suggestions will be great for me.....

    Hello Gokul,
    I could'nt see any analyse button in RSMON. This is the only error message I could get from the Process monitor:
    Short text: Error when generating the update program
    Long Text: Diagnosis
    An error occurred during program generation for InfoSource 2LIS_11_VAKON
    and InfoProvider 0SD_C15 . This may be extrapolated to incorrect update
    rules.
    Procedure
    Check and correct your update rules and then generate the update program
    again. You can find help on the error in the error log.
    Do you expect something else ? Also I went through your OSS note, they are asking to apply support pack 18. Is this a serious issue to apply SP? Because in Quality and Prod it loads fine......
    Please let me know your idea

  • Error in activating  the update rules

    Hi All
    I am getting an error while activating Business Content update rules.
    I have activate Cube and corresponding InfoCube and was trying to select update rule for the Cube and installing it.
    It however gives an error saying Update Rules (Technical Name) are not found.
    Anyone encountered this in the past.
    If yes let me know the remedy
    Regards
    PB

    Hi P B,
    This might be a long shot, but I still want to see if I can be of any assistance:
    Have you encountered SAP note 789272 and SAP note 787875?
    They should be contained in SP 19 for BW 310, and your errors do resemble those we encountered, albeit using a different version of BW. These notes are relevant for both mine and your version.
    Otherwise, I'll gladly have a look at your error messages you can send over here.
    Best Regards,
    Daniel

  • Conversion of Update rule to new Transformation

    Hi All,
    I'm using BI 7.0 SP9. I have a scenerio where in I need to load standard cube 0SD_C03 cube from the standard extractors like 2LIS_11_VAITM etc..
    Based on the the thread below I have done the follwoing steps.
    how to migrate old transfer rule/update rule to new transformation?
    - Activated Business content cubes, update rules, infosources etc...
    - Done all the required work in Source system.
    - Later migrated data sources.
    - Now the problem comes, Based on the above tread I have gone to the context menu and selected "Tranforamation erzeugen". It asks to create new Infosource created a new infosource and the the transformation came up. But I can see its not mapped to Source system datasource. I mean its not linked to the datasource in Source system. Its just created in BW and when i load nothing happen. I understand this is not correct process.
    But when it pops up for Infosource If I select existing Infosource I dont see the old one's just because they were migrated already.
    Now how do I link with the source system with out creating transformation manually. because there are lots of standard routines in update which cant be rewriten in new transformation manually.
    Please let me know if there is a way to directly copy them and also correct me If i'm doing some thing wrong.
    Thanks in advance,
    Reagrds,
    Prashanth Reddy

    As Alex said delete the existing datasources and try to replicate it again as 3.x datasources. The process will work fine.
    When you replicate datasources it will pop-up screen for you to replicate as 3.x datsources or as a new datasource.
    Whenever you will plan to migrate from 3.x to new one, do migrate update rule, and transfer rules first. As when you migrate datasource, it deletes existing update rules/transfer rules also. For each update rule/ transfer rule it will create transformation for you after migration.
    After migration your scema will look like:
    datasource (new)-> transformation( replacement for transfer rule)->infosource(new)->transformation (replacement for update rules)->data target.
    Anyways when you will createmodel from scratch in 2004s system,  i hope you know infosource is now more mandatory in 2004s system.

  • Message RSAU466 when update rules activation

    Hi everybody,
    I did some corrections in an ABAP routine in update rules. When I try to activate them this message appears :
    Message no. RSAU466
    Diagnosis
    When generating the update program for data target XXXXX, InfoSource YYYYY, a syntax error occured in row 1.980.
    System response
    The update rules cannot be activated.
    Procedure
    If the error message Incorrect logical expression. is cut off, do the following to get the complete error message:
    Go into the update rule maintenance, choose Extras -> Display Activated Program and carry out a syntax check there. You can then find out what the error was.
    I've tried to display the acitvated program but this message occurs : Unable to find a tool to process the request
    I don't want to delete and recreate my update rules because thes are very complicated and it's very risky.
    Any idea ?
    Edited by: maredami on Jun 11, 2010 1:55 PM

    Thanks for your help !
    RSAU_UPDR_REACTIVATE_ALL doesnt work (No message exists).
    I've already seen these notes but we don't want to import support packages...
    I've found the generated program of the update rules (GPxxxxxxxxxxxx) and at the line 1980 that is wrote :  S_COB_PRO_PLANT TYPE RSD_S_COB_PRO.
    I have no idea what to do now...

  • Extraction time while updating the data from update rule

    Hello Friends,
    Can you please tell me that why it is taking more time while updating the data from update rule to data target.
    I believe that it is taking 40% of total extraction time.
    Is there any specific reason for it?
    Prompt reply will be appreciated.
    Regards,

    hi,
    check if you have complex transformation in that update rules, like calculation, read from other tables, etc.
    take a look 'bw loading performance and analysis' doc
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1955ba90-0201-0010-d3aa-8b2a4ef6bbb2
    and bi performance tuning knowledge center
    Business Intelligence Performance Tuning [original link is broken]
    there e-learning for bw performance
    hope this helps.

  • Missing Update Rules for 0IC_C03 in Business Content

    We had a problem with 0IC_C03,  so we decided to reload from Business Content and then migrate to 7.0 format again.
    However, when we try to gather all of the dependent objects for the InfoCube in Business Content, we only get one set of obsolete update rules (2LIS_40_S278), and the update rules for 2LIS_03_BX, 2LIS_03_BF, 2LIS_03_UM do not show up.  They do not appear under update rules, either.
    I know they were there at one point because I activated and migrated the cube once already.
    Can someone help us find our lost update rules?

    Hi Dan,
    There are no update rules deliverd with BI 7.0 for 0IC_C03. There are only
    transformations Delivered as part of the content. In the new release
    Transformation replace the update rules and the transfer rules.                                                                               
    You have the 3 data sources and the associated transformations to  
    upload data to the infoCube.                                                                               
    Transformations installed                                          
    TRCS 2LIS_03_BF_TR -> CUBE 0IC_C03                                 
    TRCS 2LIS_03_BX_TR -> CUBE 0IC_C03                                 
    TRCS 2LIS_03_UM_TR -> CUBE 0IC_C03                                                                               
    DataSources installed                                             
    2LIS_03_BF                                                        
    2LIS_03_UM                                                        
    2LIS_03_BX

  • Copy Update rules with routines

    Hi,
    How can i copy the update rules (with routine) for a cube from the  predefined update rules of some cube.
    Like its giving error when i am creating update rule, with using the Template functionality in that.
    Please give step by step explanantions....

    Hi,
    Try this.
    Copying/Transferring Update Rules from a Template
    http://help.sap.com/saphelp_nw04/helpdata/en/02/70f837329cb402e10000009b38f889/frameset.htm
    Hope this helps.
    Thanks,
    JituK

  • Error in Update Rule migration using "Create Transformation"

    Hi gurus,
    We are encountering errors in the migration of our 2LIS_03_BF and 2LIS_03_BX update rules into a transformation via URs Context Menu    Additional functions - > Create transformation
    This action creates a new transformation, but is only generating very little Routine assignements in our KF fields. That is, some KF have their old ABAP converted automatically into ABAP OO while the rest (majority) of KF fields have no rule (routine) assigned at all.
    However, the most surprising thing is that after executing the "Create Transformation", the log shows everything correct and warnings (message 652 "Routine created. Verify sintax").
    Have you ever faced this problem?
    Is the automatic migration tool working correctly?
    If not, do we need to manually create all those KF routines that have not been correctly been migrated? Even after two years since new dataflow that was released?
    We are on SP 15...
    Thanks and best regards,
    Enric

    Hi Juanjo,
    In fact, if I understand you correctly, I'm facing the same situation: all FORMS based on OLD individual KFs routine are now available in the global transformation routine in ABAP OO, but what I'm missing is the individual source to target KF field mapping to routine, where the method with the perform to each coding should be done.
    Shall I understand this is a common bug? Manual correction proposed?
    Thanks,
    Enric

  • Error when transporting a transformation (Update rule) BI 7.0

    Error when transporting a transformation (Update rule) BI 7.0
    Hi all,
    I’m trying to transport the transformation between the infocube 0FIGL_C10 and the ODS 0FIGL_010 from BI Dev into BI QAS. I kept getting a return code 12.
    Transport message:
       Program terminated (job: RDDEXECL, no.: 18141700)
       See job log
       Execution of programs after import (XPRA)
       End date and time: 20070620181432
    I go to the log and I got the following message:
    Job started
    Step 001 started (program RDDEXECL, variant, user ID DDIC)
    All DB buffers of application server vrxsapq1 were synchronized
    ABAP/4 processor: ASSERTION_FAILED
    Job cancelled
    I’m using BI 7.0
    I don’t know what it is. Can someone tell what should I do or what I’m missing?
    Thanks a lot
    Regards
    Vic

    Hi Victor,
    check this thread may it solves your problem
    Re: Error during the creation of transport request
    one more thread
    /message/2785863#2785863 [original link is broken]
    cheers
    Sunil
    Message was edited by:
            Sunil John

  • Update rule to transformation migration error

    Error produced during update rule (BW3.5) to transformation migration. During start routine validation check it states that ' The data object 'COMM_STRUCTURE' has no component called 'BIC/ZCH_FABC1'  but there is a component called 'BIC/ZCH_FAAC1'.
    Even though this component is exist as part of communication structure, migration setup is producing an error.
    System is BI SP 16 level. OSS message is created, if you have experienced any similar issues, pls. share and let us know.
    Thanks, Vijay Rama.

    Hi VJ,
               The ideal best practice is to replace the Routines manually. As BI 7.0 wont hold Comm. structure, You are facing this problem.
    So you replace Comm.Structure to with Source_Fields.
    So while migrating the routines do it manually.
    You can find a lot of info in SDN if you search using the related terms
    regarding Migration.
    Hope this Helps
    Regards
    Karthik

Maybe you are looking for

  • Multiple Oracle Cursors in a function

    Hello folks. We are componentizing a good chunk of data wrangling, stuffing the random-ish queries and stored procedures in to CFCs. However, many of the Oracle procedures return more than one cursor (resultset). I am a bit shaky on CFCs in general I

  • Image Links property, what's the deal?

    I have several Image viewer elements in my site, and even though I've specified NO image link URL, when clicking images, it tries to go to macromedia.com See attached code. Rich

  • Lenovo U410 8.1 Audio Issues

    I have owned the Lenovo U410 Ideapad for a decent while now and I have been consitently satisfied with its preformance. Recently I uprgraded to Windows 8.1 and it does not play any sound from any source. After some searching I found the software to f

  • What happened to Prey Invasion?

    I was looking into different games for the iPhone, and I came across Prey Invasion. This game came out in June of 2009, yet it doesn't exist on the App Store any longer. Does anyone know what happened to it?

  • Top of the Heap

    The PPBM5 Website Bill and Harm put together offers a great reference for system builders wanting to get the best editing computer for their money. I wrote an article yesterday on my personal business Website with a couple of links to the PPBM5 site.