Error in transmission for SC trying to create a PO .

What does this error mean I am getting the error in SC
Case 1 : ME 083 Enter Material Group however  the material group =Product category is already in the SC .
Please explain on how to get this error fixed ?
Does the user have to recall the SC for the error to be rectified OR A new SC has to be created ?
Case 2 : For some SC though I see Error in transmission yet not able to see the SC in RZ20 . Pleas explain on how to diagnose and check what the error is ?
regards
Vinita

Hi Vinita,
For Case I - Please check the posts below. They are similar errors but not exactly the same.
http://scn.sap.com/thread/3233354
http://scn.sap.com/thread/3439656
https://scn.sap.com/thread/2083247
For Case II -
If you could find whether it is Local or Backend error then the analysis could be done with the focus way -
Otherwise  If your not able to see in RZ20 - then try to go to BBP_PD -- Check for all master data -- check whether all things are maintained one by one in PPOMA as well as backend system.
I hope you must have already checked the material group in the both the systems.
I will check and update you if i could find anything.
Thanks.
From RBEI,
Snehal

Similar Messages

  • SC error " error in transmission" for reservation

    We are using SRM 5.0 with ECC5.0
    We are able to create complete cycle with Shopping cart >PO in ECC5.0>Confimation-->Invoice in EBP
    <b>But when SC is created for stock items it is showing status as "error in transmission or error in process"</b>
    What is missing?
    Rgds
    NNK

    Hi
    What movement type are you using in the SRM org structure ?
    <b>- 201</b>
    What reservation number range did you configure in SRM and ECC ?
    ECC - RS     0038300000     0038399999 (External)
    SRM - RS     0038300000     0038399999
    What transaction type have you in SRM
    -SHC for shopping cart under transcation category BUS2121
    We are able to see <b>reservation number 003830005 created in SRM in T-CODE BBP_PD under object ID "BE_OBJECT_ID"</b>
    <b>But in Status</b>
    0000000001 I1112          Error in transmission
    In details screen following error appears
    47CCE58225A94442A0B60421CAD71D27 I1111 X     004
    47CCE58225A94442A0B60421CAD71D27 I1112       003
    Regards,
    NNK

  • PSE8 for Mac Trying to create animated GIF.  Why can't I change the animation delay?

    I am trying to create an animated GIF for the first time.  Finally figured out most of it, but it won't let me change the speed from 0.2 which is waaaay too fast.

    Welcome to iMovie Discussions.
    See my 2nd reply to 'getzcreative', here.

  • Error 11556!! When trying to creat Ringtone..

    I have logged into Itunes this morning and be met by the create ringtone details.. Having read the help details and followed them step by step. I select my purchased track to convert and then I get the ERROR MESSAGE 11556 itunes unable to connect to itunes store, yet the store is open and I am signed in... HELP

    i am logged into the Uk itunes store..and I have a new ringtone icon under my device and my library and I also had a message on the screen when I first connected this morning asking would I like to check purchased tracks for use as ringtones...
    If they are not available how come the options are available to me!?
    In your library highlight a purchased song then click in store in the control panel at the top of the screen you will see the option CREATE RINGTONE...
    STRANGE!! HELP!
    Message was edited by: matty76
    Message was edited by: matty76
    Message was edited by: matty76

  • Unknown server error (30641)- BB playbook- when trying to create BB ID

    unknown server error (30641)- During set up, it asks that you create a Blackberry ID for the BB playbook. Then it shows unknown server error (30641)- I plug it to my computer and download the Desktop manager which ask to update it. I did then it told me disconnect Playbook, install BB ID and plug into PC again. But I got server error again. I am stuck on server error. can you by pass the ID set up and get the BB playbook working and the ID thing after? The ID is not even some critical security feature that must come before the enjoyment of the product. I am really frustrated with my brand new device and my money is wasted. If BB has no fix for this I want my money bacck.
    Solved!
    Go to Solution.

    Perhaps this can help you:
    Article ID: KB28198 "Error Id: 30641" is encountered when creating a BlackBerry ID with BlackBerry App World on a smartphone
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Error 500 is displayed when trying to create an RNA detection policy

    When I attempt to create an RNA detection policy, I receive the following error message on the web interface of my Sourcefire 3D System:
    Error 500: Internal Server Error

    If you install a FireSIGHT license on a 3D System running software version 4.10, it may display an Error 500 message, because a FireSIGHT license is incompatible with software version 4.10.x. In order to install a FireSIGHT license, you appliance must be running software version 5.0 or greater.
    In order to fix this Error 500 message when attempting to create an RNA detection policy, please follow the steps below:
    Step 1: Log into the web interface of the Defense Center, and navigate to Operations > System Settings > License.
    Step 2: Look for an unknown license type (FireSIGHT) as the following figure:
    Step 3: Delete this unknown license type using the trashcan icon labeled Delete User-added image.
    Step 4: Activate RNA and or RUA feature licenses, Operations > System Settings > License > Add New License, from your product activation keys.
    Note: If you do not have RNA/RUA activation keys, please contact your Sales Representatives.
    Step 5: Once activated, you should be able to see a valid license type under the License page as displayed in the figure below.
    Step 6: You may now create an RNA detection policy from Policy & Response > RNA > Detection Policy > Create Policy page without any error.

  • I keep getting an error message when i am trying to create and send a contract... help?

    (echosign_dev1__SignatureType__c: echosign_dev1__SIGN_Agreement__c: bad field names on insert/update call: echosign_dev1__SignatureType__c, echosign_dev1__Opportunity__c, echosign_dev1__Cc__c, echosign_dev1__Recipient__c)
    This is the error message I keep getting.. all the app permisions are correct as from what i have found in ebooks and other sources.. Please help!

    Hi,
    I believe you have been contacted by support directly.
    You were missing field level permissions on the agreement object. You needed to expose all agreement field level access to the effected profiles.

  • Webi Error (WIS 10012) when trying to create a variable help me

    Hi ,
    I am struck with an error in webi When i trying to create a tax variable i have given the formula as [Sales Revenue]* 0.175 and trying to save it i am getting the below error
    " the Number .175 at position 15 has a format that is incompatible with your regional settings,(WIS 10012)"
    when i try in different way [Sales Revenue]* (0,175) i am getting right answer. Please help me where i have to change my regional settings.

    Hi Sreeram,
    What is the Locale set at the universe level inside Tools --> Options --> General tab? Can you share the screenshot?
    The drop down option at left bottom side helps you to set the language for the GUI; however, the button next to it decides the locale of the data.
    You need to set the same locale at Webi level as well. If your value is a decimal value then setting locale to English US might not help as comma (,) is used for digit grouping and dot (.) is used as a decimal seperator; whereas, the value shown by has comma as decimal seperator.
    The locale settings of European countries (like French, Dutch, German, etc.) have the opposite format i.e. dot is used for digit grouping and comma is used for decimal seperation.
    I am pretty sure any of such locales are set at universe level. Check and have same locale in Webi Preferences.
    Hope it will help.
    Regards,
    Yuvraj

  • Error when users tries to create a cart.

    Hi there ladies and gents,
    We are getting an error when a user is trying to create a cart, the following error appears
    "No data found for contact person "XXXXXXXX" Inform system administrator"
    We have check PPOMA_BBP and also HR have checked there area and all seems ok???
    Any ideas???

    What i can tell you after running BBP_BP_OM_INTEGRATE for business partner, employee role, i get the following : -
    @5C\QError@     Error determining address for employee DD0A7F0F4A3D83F1AA8D0016353BF3FF     @5F\QNo long text exists@
    and
    @5C\QError@     Employee relationship between BP 0000004261 and BP(Org) 0000002669 missing     @35\QLong text exists@
    The help says the following but i am sorry to say it means nothing to me : -
    Employee relationship between BP 0000004261 and BP(Org) 0000002669 missing
    Message no. BBP_UM_UI040
    System Response
    The assignments of the BP units of the employee &V2& -> Natural person of the employee (if necessary -> Contract) -> Work Center -> Position -> BP of the Position lead to BP &V1&. There is, however, no connection between the business partner objects.

  • Further error messages exist for this transaction

    Hello all ,
    i am getting en error message "Further error messages exist for this transaction" while creating an opportunity from external  number ranges
    please help me out how to solve this.
    Regards
    Ahmad

    Hi Mohammad,
    There might be any error transaction so there suppose to be an error insystem status. If you are able to generate opportunity number after saving than please do check in GUI with transaction crmd_order and check the message detail and revert.message detail is needed in order to proceed further.
    Thanks,
    Prem

  • Error while trying to create Transaction variant for FV60 layout change

    Hi Gurus,
    I am trying to change the "order/sequence" of FV60 layout (rearranging columns). For which I tried to create Transaction Variant (in sandbox). I keyed in the t-code (FV60) and gave a variant name in the field for Transaction variant. But it gives me a wierd error - "Enter transaction code". Has anybody come across this before? This is enhancement pack 7 so the config button is not available.

    Thanks Ravi. I went through the note and did exactly the same. But the two check boxes displayed in the note for "Adopt column sequence" and "Adopt column width" is not displayed in my screen!!! Screen shot attached.

  • Error when trying to create XUSER information for SAPServiceSID

    Hi all,
    I am getting the following error when trying to create the XUSER information for the SAPServiceSID user on a WINDOWS/MAXDB 7.9 install..  Does anyone know a FIX for this?
    >xuser -c .\SAPServiceSID -U c -u CONTROL,P@ssw0rd -d SID -n HOSTNAME -S INTERNAL -t 0 -I 0 set
    FATAL: Close xuser entry failed: could not write USER data [1307]
    I am running the command as the SIDADM user. 
    I have tried the solutions in the following notes without success:
    39642
    1542818
    39439
    1875264
    1409913
    Thanks!

    Hi Jayson,
    Try this.
    Solution
    Add the "Administrators" group under:
    Control Panel
    -> All Control Panel Items
       -> Administrative Tools
          -> Local Security Policy
             -> Local Policies
                -> User Rights Assignment
                  -> Take ownership of files or other objects
    You check you command and modify.
    xuser.exe -c Hostname\SAPServiceSID -U DEFAULT -u Username, Password -d SID -n Hostname -S Schema_Name -t 0 -I 0 set'
    Regards,
    V Srinivasan

  • Error while trying to create Contact for Bank in Cash Management

    Hi,
    I have a Bank created in Cash Management. I am trying to create a Contact for the bank but when I click on the Create Contact button, the page appears with the following error on top
    "No field listener is registered to resolve field CUST.CUSTOMER_NUMBER referenced by the flexfield with application short name AR and name RA_PHONES_HZ. Please contact your system administrator. "
    I can enter the desired values in the contact details fields like name , job code etc but then nothing happens when I click on the Apply button.
    I found the following notes on metalink for similar errors but none of them explains how to resolve the issue.
    1087754.1,
    889794.1
    791190.1
    Could someone please help me resolve the issue? I am a newbie to Oracle Apps.
    Thanks
    Susovan

    Please see the solution in (The Descriptive Flexfield With Application Name Receivables (AR) and Name Party Site Information (HZ_PARTY_SITES) Is Not Frozen [ID 743262.1]).
    Thanks,
    Hussein

  • I have been trying to create an apple ID for the past 2 days and cannot succeed : it states an unknown error has occurred and no ID is created. What to do?

    i have been trying to create an apple ID for the past 2 days and cannot succeed : it states an unknown error has occurred and no ID is created. What to do?

    The internet is the internet. if its not working then its something to do with your not allowing cookies from apple's site or they are having issues.

  • Receiving Error : Please set the Receivables system options for this operating unit and ensure that the MO: Operating Unit profile option is correctly set with an operating unit that is set up in Receivables. while trying to create a new Customer.

    Hi All,
    We have set up a new Operating Unit in Oracle Apps. Now when I am trying to create a new Customer in that Operating Unit, I am receiving following error:
    ERROR MESSAGE:-Please set the Receivables system options for this operating unit and ensure that the MO: Operating Unit profile option is correctly set with an operating unit that is set up in Receivables.
    We do have MO: Operating Unit and MO: Default Operating Unit set properly at Responsibility level for the Responsibility through which I am accessing this form.
    Your help is appreciated!
    Thanks in advance,
    SKA

    You can refer this thread and check your MO operating unit is set or not https://community.oracle.com/message/3937028 thanks

Maybe you are looking for