Error in transporting info-object

Hello Experts,
We need to a import an info-object from Quality to Prod.
From Dev to Quality the transport was successful, but while transporting from
quality to prod we are getting the following errors:
Changes cannot be made, display user only
And as a result the info-object and hence the info-object,transfer rules/Transformation etc are
now inactive in the prod. enviornment.
Could anyone advice on what may be the source of this error??
Thanx and Regards
Priyanka

Hi Priyanka,
Pls check below threads, may be it will helpfull to you.
https://forums.sdn.sap.com/click.jspa?searchID=21045654&messageID=6758914
https://forums.sdn.sap.com/click.jspa?searchID=21045654&messageID=6720353
https://forums.sdn.sap.com/click.jspa?searchID=21045654&messageID=6407281
https://forums.sdn.sap.com/click.jspa?searchID=21045906&messageID=6758914
https://forums.sdn.sap.com/click.jspa?searchID=21045906&messageID=6407210
Thanks & Regards,
Ramnaresh .P.

Similar Messages

Error while creating info object

error while creating info object a character
Info object may be a maximum of 000060 digits...... what would be the error?
Thanks ALL

Hi,
The maximum length supported by one CHAR type infoobject is 60. Check whether you have assigned more.
If you have to load more length ( more than 60) split the total thing into different infoobjects. Create different infoobjects and split the total thing into them - like 1st 60 char in 1st infoobject, char 61-120 in 2nd infoobject and so on. Then you can again concatenate them.
Thanks,
Indrashis

Error when transporting ODS Object

Hi All,
I got the following error when transporting ODS object.
"The creation of the export DataSource failed"
"RFC connection to source system QB1CLNT100 is damaged ==> no Metadata upload"
"Error when creating the export DataSource and dependent Objects. Error when activating ODS Object 0FIGL_O10"
Maybe somebody can help me.
Thanks a lot and appreciate that,
-Martin-

hi Martin,
check oss note 597326 - Activating ODS: Error when creating the export DataSource
Symptom
When you activate or transport ODS objects, the following errors appear in the log:
"The creation of the export DataSource failed". Message number RSBM 035
"Error &1 in function module &2". Message number RSBM 006
"<b>Error when creating the export DataSource and dependent Objects</b>". Message number RSDODSO 169
"Error when activating the ODS object &1". Message number RSDODSO 168
Other terms
RSBM 035, RSBM 006, RSDODSO 169, RSDODSO 168
Reason and Prerequisites
A characteristic involved is active but it is using new or inactive attributes.
Characteristics involved are all characteristics used in the ODS object.
Solution
Check all characteristics involved as described in the following:
Check the Compounding and Attributes tabs in the characteristics maintenance.
All characteristics here must be active. This is displayed by a green icon.
If this is not the case for a characteristic involved (a gray icon is displayed on one of the two tabs), activate the characteristic involved. This also activates the inactive dependent characteristics.
After you have checked and repaired all the characteristics involved as described above, the loading/maintenance of master data should work again.

Error in transpoting info object

Hello,
Need help to solve this please!
I am getting an error while tranporting an info object!
Error 1 with function module RSDRX_FILL_INITIAL_PQTABLE (Fill Master Data)
Message no. R7195
Diagnosis
Possible causes:
Function module DB_CREATE_TABLE
There is not enough room in the table space.
Procedure
In this case, check the logs on the database and extend the table space if it is too small.
Help me please!
Regards
RAm

Hello,
Help me to solve this !
I cant transport the info object !
It says:
Function module DB_CREATE_TABLE
There is not enough room in the table space.
Procedure
In this case, check the logs on the database and extend the table space if it is too small.
Help me!!
Regards
Ram

Error while creating Info Object in Info object catelog

Hi experts,
I'm making few info object in info object catelog but while activating system giving error mesage as "Error when generating master data routines"
can any one tell what's the problem and what needs to be done.
Sumantra

Hi
let me know weather r u using any reference object which contain the routinee.
regards,
chandra.

Error during Transporting ID objects in PI 7.1

Hello Experts,
I am facing error during transportation of ID objects MY PI is 7.1 version In IR i have exported SWCV it generated .tpz file but in ID if am exporting it is throwing error
Export failed:Internal error during pvc call:Parameter version Specifier or version has the invalid value null
Please suggest me where would be the error any help is highly appreciated
Regards
Praveen

HI,
Problem is with all the folders in Integartion Directory while exporting objects from PI DEV it is throwing error like
com.sap.aii.utilxi.misc.api.ResourceException: Export failed: Internal error during pvc call: Parameter versionSpecifier or version has the invalid value null
     at com.sap.aii.ib.server.transport.impl.utils.PvcUtils.throwRootCause(PvcUtils.java:86)
     at com.sap.aii.ib.server.transport.impl.utils.PvcUtils.createPropagationList(PvcUtils.java:58)
     at com.sap.aii.ibdir.server.transport.impl.service.DirTransportServiceSeImpl.createExportVersionset(DirTransportServiceSeImpl.java:98)
     at com.sap.aii.ib.server.transport.impl.service.TransportServiceImpl.exportXiObjects(TransportServiceImpl.java:655)
     at com.sap.aii.ib.server.transport.TransportServiceBean.exportXiObjects(TransportServiceBean.java:317)
     at sun.reflect.GeneratedMethodAccessor2467.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:592)
Regards
Praveen
Edited by: Maareddy Praveen Reddy on Nov 1, 2011 11:59 AM

Error while transporting ID objects via CTS

Dear All,
I am facing some issue in Transporting ID objects from Dev to Q.
We have a Central SLD for Dev and Qual. Prod has a different SLD.
I have used Transport targets in SLD to point the Dev to Qual and Qual to Prod.
After this, I created Business Systems in Integration Directory using the Bus Systems from SLD.
When I try to *export these Business Systems in Integration Directory from Dev to Q via CTS * then I get the fol error:
>>>cation Component   NDPL_File_Dummy_P: Obligatorytransport target for business system NDPL_File_Dum
>>>my_P not found in System Landscape Directory
>>>on: Import failed because of business system transfer of object Communication Component   NDPL_File
>>>_Dummy_P: Obligatory transport target for businesssystem NDPL_File_Dummy_P not found in System Land
>>>scape Directory
>>>stprocessTransport(TransportPostprocessor.java:67)
>>>rocessing.InternalImportPostprocessorDir.postprocess30And70Import(InternalImportPostprocessorDir.jav
>>>a:93)
>>>rocess(AInternalPostprocessorDir.java:146)
>>>g.gen.DirPostprocessor.doPostprocessing(DirPostprocessor.java:95)
>>>apt.XIDirPropagationProvider.transportFinished(XIDirPropagationProvider.java:96)
>>>server.transport.impl.pvc.GenPvcTransport.genPvcImport(GenPvcTransport.java:75)
>>>r.server.transport.impl.pvc.DirPvcTransport.pvcImport(DirPvcTransport.java:74)
>>>rver.transport.impl.service.TransportServiceImpl.pvcImport(TransportServiceImpl.java:876)
>>>p.aii.ib.server.transport.impl.service.TransportServiceImpl.importZippedStream(TransportServiceImpl.
>>>java:991)
>>>portServiceImpl.java:773)
>>>D_WRITE_VERSIONSET(CmsHmiMethods.java:534)
>>>s.process(CmsHmiMethods.java:131)
>>>isServiceImpl.java:167)
>>>at com.sap.aii.utilxi.hmis.sbeans.HmisBeanImpl.process(HmisBeanImpl.java:98)
>>>edMethodAccessor490_10000.invoke(Unknown Source)
Please help...
regards,
Piyush

>
Piyush Mathur SAP wrote:
> >>>cation Component   NDPL_File_Dummy_P: Obligatorytransport target for business system NDPL_File_Dum
> >>>my_P not found in System Landscape Directory
h
has the transport path been set? you should have the target BS in the QA SLD present

Error while Transporting ID objects

Hi,
I have transported IR objects correctly from dev to QA environment, but when Im trying to transport ID objects, its giving me error saying that the Business System is not available.
I am using File Based Transport.
Regards
Sudhir.

HI Sudhir
As said above
You need to create the Business system if its not there in SLD. If it exist then it require a cache refresh as XI is not identifying the business system.
You need to set SLD source and target system so that in future it works automatic to identify the target system.
Thanks
Gaurav

Error : Not all info objects trasferred successfully

I am getting this message when adding 0calmonth to catalog. Anyone has similar issue .

Hi,
First of all why you want move 0calmonth from one catalog to another one.
0calmonth is standard info object and it might be installed along with standard catalog.
What is the problem your facing if 0calmonth under old catalog.
Thanks
Chandra

Error when activate Info Object

Hi everybody.
Maybeyou can help me.
I made a transport to the production system.
The system was disconnected when i made the transfer. The transportation has fail, however, has generated objects in the target system.
In particular I have a problem with a standard InfoObject (0GN_BWBEOTY).
This object was transported to Production environment but has been inactive.
I can not activate it.
I used the transaction RSRV InfoObjetct, to validate integrity and I get the following errors:
CL_RSMD_RS_0GN_BWBEOTY Class, Method IF_RSMD_RS_ACCESSS ~ get_text.
"RSBWBEOTY" is not defined in the ABAP Dictionary as a table.
I tried to move into a new transport order, the only InfoObject but I get error code 12.
Someone has happened, can you give me ideas? what can i can do?
Thank you very much for help me!

Hi!
Thank you for your help.
I still have the problem .
I can not verify whether the information in master data, since the transported infoObjetct not appear in the RSA1 (production) and can not display the master data RSDMD trx.
And i can not activate through RSDG_IOBJ_ACTIVATE. I get the error message detailed in the first post.
This is the transport log:
       |   Program terminated (job: RDDEXECL, no.: 15123000)
|      See job log
|   Execution of programs after import (XPRA)
|   End date and time : 20110519151246
|   Ended with return code: ===> 12 <===
|   ######################################
This is te JOB Log:
19.05.2011
15:12:31
Job started
00
516
S
19.05.2011
15:12:31
Step 001 started (program RDDEXECL, variant , user ID DDIC)
00
550
S
19.05.2011
15:12:31
All DB buffers of application server SFESA-20 were synchronized
PU
170
S
19.05.2011
15:12:36
Internal session terminated with a runtime error (refer to ST22)
00
671
A
|19.05.2011 |15:12:36 |Job cancelled
Any ideas?
Edited by: Javier Sarrelli on May 20, 2011 8:14 PM

Error when transport Info Cube(0SD_C01)

Hi Experts,
whenever i tried to transport the infocube i came across the following errors. But good thing is that all my object related to cube is in active mode. I had used "data flow before" during transportation. Please note that datasource 0Vtype_text is not present in the R/3 development either. Is this a serious error or can we proceed further without worrying about it? Please find the following error
"Start of the after-import method RS_ISMP_AFTER_IMPORT for object type(s) ISMP (Activation Mode)
DataSource 0VTYPE_TEXT does not exist in source system FGLCLNT850 of version A
Mapping between data source 0VTYPE_TEXT and source system FGLCLNT850 is inconsistent
DataSource 0VTYPE_TEXT does not exist in source system FGLCLNT850 of version A
Field LANGU will not be delivered from DataSource 0VTYPE_TEXT in source system FGLCLNT850
Field TXTMD will not be delivered from DataSource 0VTYPE_TEXT in source system FGLCLNT850
Field TXTSH will not be delivered from DataSource 0VTYPE_TEXT in source system FGLCLNT850
Field VALUETYPE will not be delivered from DataSource 0VTYPE_TEXT in source system FGLCLNT850 "
Reward point is must for each and every helpful answer.
Thanks in advance.
Regards
Deepak

Hi Deepak,
Please go to RSA5--->check this patch
PI_BASIS                       PI Basis
>
    0CA_GD                         General DataSources
______________>
        0CA_GD-IO                      Master Data for General DataSour
____________________>
            0VTYPE_TEXT                       Value Type for Reporting
Activate this and then replicate this ..
Hope this helps and dont forget to assign points if this helps
Regards
Rahul Bindroo

ERROR IN ACTIVATING INFO OBJECT

GETTING AN ERROR WHEN I TRIED ACTIVATING THE INFOOBJECT. ERROR I GOT IS,
" ERROR GENERATING MASTER DATA ROUTINES."

This is an ABAP report which can be used to check the consistency of the Objects related to SID values, Nav attribute, Object versions, values check for MD attributes,,,etc...
In case of any errors, you can see the detailed log here and repair as well...
Pls use this to identify the errors in your IOBJ and correct accordingly!
Hope this helps.
-VA

BI 7.0, BEX 3.5, Error while restricting info object

Hello gurus,
We are using BI 7.0 and Bex 3.5, MS office 2003,OS windows XP. While restricting infoobject, by right clicking on the infoobject and chosing the opiton restrict, we are encountering some error messages "fatal error terminating", "Automation error the object invoked has disconnected from its client", next error message is "Active X could not create the object".
Thanks & Regards
Rahul

Hi Rahul
Iam also working on BI7.0 and Bex 3.5,i too encountered same problem. One way to resolve the problem is, consider below example
Suppose if u r trying to restrict 0Fiscper Infoobject, try to open variables and select the required variable in the Left column(i mean under Dimensions) then drag and drop that variable into rows or columns, then ur problem get's resolved.What i observed is, if we are trying to right click the infoobject and restrict it when it is in rows or column,then this is giving "fatal error and terminating from login.
Let me know if u need any further information.
Thanks
Raghu

Error while activating info objects.

Hi,
After activating the data in ECC rsa5 and replicating it in BW rsa1, when i am trying to activate the infoobjects in object types i get the following error.
*DataSource 0RF_ARTHIER_ACT does not exist in source system DVMCLNT110 of version A *
kindly help me.
thanks.
- rohit mulay

Hi Rohit,
you can activate the datasource by using 'RSDS_DATASOURCE_ACTIVATE_ALL'program
Please follow bellow steps:
1.Goto SE38>give the Program>click on Execute.
2. Give the technical name of Datasource and Execute.
Note: there is one check box, first execute with that checkbox checked and see, if that didnt work, uncheck the checkbox and execute, hope this should solve your problem.
3. Replicate the Datasouce in BI side.
4. Activate the relavent Objects indevedulally.
Regareds,
Suman

Error,Info Object 0CHNGID is requested.

Hi All,
I am new to BW/BI, and i am trying to upload data from flat file to BI system; I have uploaded the data successfully into PSA and then into InfoCube; But when i am trying to display the data in the cube i got some 4 errors, i managed to remove the 3 errors by successfully re-importing the missing infobjects from BI Content.
How ever i was not able to overcome this error; it says, "Info Object 0CHNGID is requested", i tried to search this info object in the BI System so that i can also re-import the same but it is not available.
So can anyone of you assist me to overcome this issue.
Thanks,
Raghu

Hi raghavendra...
Its there in the Business content check it. i had checked it just now.
Can u tell me how you are checking the 0CHNGID?
Goto RSA1 -- BI Content -- object types -- infoobject -- search for info object -- and install it.
Regards
KP

Error in transporting info-object

Similar Messages

Maybe you are looking for