Error in Transporting the Transfer structure
Hi can any body tell me . Iam getting this error while transporting from BW System the transfer structure for 0HR_PY_1_CE.
1. Transfer structure 0HR_PY_1_CE_LA does not exist.
2. Error RSAR 440 during after import handling of objects with type(s) ISTS
3. Errors occurred during post-handling RS_AFTER_IMPORT for ISCS L
I have activated the transfer structure through this programme - program RS_TRANSTRU_ACTIVATE_ALL.
Check the below notes:
Note 1009638 - RSAR 440 when you activate transfer rules applicable for BI7.0 Less than SP12.
Note 736668 - RSAR 440: Transfer structure & does not exist Applicable for 3.x system.
Please check the above Notes and based on your system patch level and issue you need to choose the right one. Second one deals with the Hierarchy.
Hope this helps..
Murali
Similar Messages
-
Hi friends
when i have trying to transport infocube 0fiar_c03 with infosource 0fi_ar_4 from development client.the following message has shown as error "No Transfer Rule(s) available for the transfer structure 0FI_AR_4_DB in the control table".pl let me know the possible cause of error.
Rgds
Tukunadear Tukuna,
it seems the transfer rules not transport.
try in dev, change transfer rules,
and from menu extras (beside go to) -> object directory entry -> transfer rules -> in next screen, check if package/development class is $TMP, click pencil icon, and choose your package/dev class, system will prompt request, create new request and transport.
<b>if package/dev class isn't $TMP</b>, try following,
rsa1->transport connection->left panel choose 'object type' and middle panel 'infosource' and 'select objects', and choose '0fi_ar_4' and 'transfer', then you will see 0fi_ar_4 in right panel, we will use this infosource to collect transfer rules.
you may need to specify the source system assignment in transport connection when collecting objects, click 'source system assignment' and make sure your r/3 source system is marked.
choose collection mode 'manual' and grouping 'in dataflow before', and 'execute', after objects collection finished, expand the infosource and make sure your transfer rules and datasources are there and marked. click transport (truck icon).
also make sure you maintain the source system mapping in TARGET system (QAS), rsa1->tools->source system mapping (tcode rslgmp), fill 'orgsrcsys' with r/3 dev and 'trgsrcsys' with r/3 QAS, do the same for BW Prod with r/3 qas for 'orgsrcsys' and r/3 prod for 'trgsrcsys'.
hope this helps. -
Error occurred when creating transfer structure /BIC/CCGS0EC_PCA_1
Hi Experts,
While activating th transfer structure 0EC_PCA_1 i am getting the below error
Error when creating transfer structure /BIC/CCGS0EC_PCA_1 in source system N6A420
Message no. R3104
Diagnosis
An error occurred when creating transfer structure /BIC/CCGS0EC_PCA_1 as an IDoc segment in source system N6A420 .
Could any one please help
Thanks in Advance,
NityaHi,
I have a similar issue on one of my clients, unfortunately they are using PSA method already, however, somewhat interestingly when I switch to Idoc it activates fine? The log in SLG1 suggests I analyze the log in source system... when I am analyzing the log in the source system?!?!?!?! Is there another log I am missing? Any ideas anyone? I did check note 493422 however as I have other extractors that are working fine connected to the same source system I am a bit loathe to implement a global solution?
Thanks in Advance
Peter -
Unable to open the Transfer Structure
Hi
We are unable to edit one of our transfer structure and when we try open the structure it's stating the following error
"Formula is not available in the table RSAFORMMAP"
Can anyone help how to fix this issue inorder to edit the transfer structure
Thanks
UMHi,
Please check notes, there are few notes available for this error, see if they can help you.
Note 1101978 - Content transfer; empty or invalid formula (RSAR 140)
Note 1036566 - Various problems with formulas (see symptom)
There are few other notes for same error in update rule, you can check those and can get some hint to solve your issue.
Regards,
Kams -
Bank Analyzer - Error while creating the Position Structure
Hi,
We are implementing Bank Analyzer 6.0 and Implementing Financial Instrument and Financial Transaction.
We facing an Error while creating the Position Structure,
Error Message: Status of structure S40CURRACC is "New"
Anyone has an idea how to fix this?
Thank you,
John CrawfordHi,
1.Run Transaction - /BA1/F0_SGS_START
2.Entered the name of the structure and try to "activate".
3.It will get Active without any inconsistency.
Regards
Phani -
Z fields are not shown in the Transfer Structure
Dear Experts,
When I look at a standard datasource in CRM, it contains about 5 Z fields. Another team has appended fields to it.
The DS is 0CRM_SRV_PROCESS_H.
It was already replicated in BI and data as been loaded. Now while investigating this DS for my needs I do not see these fields in the transfer structure. I have replicated it in BW as 3.x DS.
I am not sure what the cause is? Can anyone help?
Thanks & BR,
Raj JainProblem solved with a liitle bit exploration.
Thanks,
Raj -
Transport the organizational structure of PRD to QAS
Good Morning.
I have the following issue, I want Transport the organizational structure of PRD to QAS. I am using the report RHMOVE30 in PRD With the following entries.
Variant of Plan Active
Evaluation Path --->A003
without Test.
without With lock.
In the field Request/Task, I create a Request. and run the report.
However the system not generate object into the request, only is Request and Task and not have object into.
can anyone help me?
RegardsHi,
I tried to use RHMOVE00 to transport the organization structure.
In the transport request i included one Organizational Unit , the Position within , and the Owners assgined to that position.
Then when we got the request transported to QAS from our Dev server, I am seeing that Organization Unit and Position have been transported successfully. But the Owners assigned to the Position have not been tranported, because i guess we were not able to transport the relationship between the Owner and the Position, which we are struggling to find that how to transport the relationship.
You have also mentioned about expert Mode. But could u please tell us or guide us to some documentation on how to access the object by Expert mode.
Thanks for your help.
rgrds,
Randhir Soni -
I need to transport the organizational structure in HR
HI everybody!
I need to transport the organizational structure in HR,
I ordered the Tcode RE_RHMOVE30, the release without problems but when found in the tail of I transport the sample.
Wanted whether data within the directory or file cofile the order and not displayed.
Any help I can give will be welcome.
Thank yougo to transaction code STMS_IMPORT in your production system. Refresh the import queue. If you can not see the request, go to "Extras>Other Request->add".. Enter the request number and click ok. If you still can not find the request that means there is no datafiles and cofiles for that request or you have to bring the data file and cofiles for that request manually. This depends on your transport settings.
But I guess you have moved the request from DEV to QAS. isn't it?..that means ...datafiles and cofiles are there.
Edited by: Anindya Bose on Aug 18, 2009 12:32 AM -
Error in transporting the Transformation to Quality system
Hi All,
I am trying to transport the transformation which has field level routine as well as start and end routine.
I have basically ehanced the standard routine and it works perfectly fine in dev server . I have even loaded the data and generated reports on this cube.
Now i am trying to transport it to Quality system. It throws up some "syntax error in routine" error. Very strange.
All my routine in Dev is working but during transport ther is some issue.
i saw some post on same but they are suggesting to regenerate a new transformation. For me this will be a nightmare as there are so many routnies at field level and as end routine.
Kindly suggest how can i rectify this error.
Note:- I had generated this transformation via old update rules with Migration function.
Thanks & Regards,
AnupHi Anindya,
Below is my source code for one field level routine in transformation.
FORM routine_0080
TABLES
p_monitor STRUCTURE rsmonitor
USING
COMM_STRUCTURE TYPE _ty_s_sc_1__rule_52
CHANGING
RESULT TYPE _ty_s_tg_1_full-srvclen
RETURNCODE LIKE sy-subrc
ABORT LIKE sy-subrc
RAISING
cx_sy_arithmetic_error
cx_sy_conversion_error.
* init variables
* fill the internal table "MONITOR", to make monitor entries
DATA: ultimo LIKE sy-datum.
IF g_record_no <> RECORD_NO.
g_record_no = RECORD_NO.
CLEAR: employee_wa, person_wa.
CLEAR: employee_md, person_md.
ENDIF.
PERFORM read_md_employee
USING COMM_STRUCTURE-employee
COMM_STRUCTURE-calday
RECORD_NO
RECORD_ALL
SOURCE_SYSTEM
CHANGING employee_wa
RETURNCODE.
employee_md = employee_wa.
PERFORM calculate_ultimo
USING COMM_STRUCTURE-calday+0(6)
RECORD_NO
RECORD_ALL
SOURCE_SYSTEM
CHANGING ultimo
RETURNCODE.
IF NOT employee_md-entrydate IS INITIAL.
RESULT = ultimo+0(4) - employee_md-entrydate+0(4).
IF ultimo+4(4) LT employee_md-entrydate+4(4).
RESULT = RESULT - 1.
ENDIF.
ENDIF.
* result value of the routine
* if the returncode is not equal zero, the result will not be updated
RETURNCODE = 0.
* if abort is not equal zero, the update process will be canceled
ABORT = 0.
p_monitor[] = MONITOR[].
CLEAR:
MONITOR[].
CLASS lcl_transform IMPLEMENTATION.
METHOD compute_0AGE_RANGE.
* IMPORTING
* request type rsrequest
* datapackid type rsdatapid
* SOURCE_FIELDS-CALDAY TYPE /BI0/OICALDAY
* SOURCE_FIELDS-EMPLOYEE TYPE /BI0/OIEMPLOYEE
* EXPORTING
* RESULT type _ty_s_TG_1-AGE_RANGE
DATA:
MONITOR_REC TYPE rsmonitor.
*$*$ begin of routine - insert your code only below this line *-*
Data:
COMM_STRUCTURE type _ty_s_SC_1__RULE_20,
l_subrc type sy-tabix,
l_abort type sy-tabix,
ls_monitor TYPE rsmonitor,
ls_monitor_recno TYPE rsmonitors.
data:
l_monitor type standard table of rsmonitor.
REFRESH:
MONITOR.
* Runtime attributs
SOURCE_SYSTEM = p_r_request->get_logsys( ).
MOVE-CORRESPONDING SOURCE_FIELDS to COMM_STRUCTURE.
* Migrated update rule call
Perform routine_0070
TABLES
l_monitor
USING
COMM_STRUCTURE
CHANGING
RESULT
l_subrc
l_abort.
*-- Convert Messages in Transformation format
LOOP AT l_monitor INTO ls_monitor.
move-CORRESPONDING ls_monitor to MONITOR_REC.
append monitor_rec to MONITOR.
ENDLOOP.
IF l_subrc <> 0.
RAISE EXCEPTION TYPE CX_RSROUT_SKIP_RECORD.
ENDIF.
IF l_abort <> 0.
RAISE EXCEPTION TYPE CX_RSROUT_ABORT.
ENDIF.
I am not able to change the code which are marked with " * ". Where can i change the code here?
Regards,
Anup -
Error while enhancing the Extract structure in LBWE
Hi All,
When I am trying to change the extract structure os logistic extractors in LBWE, it is giving me an error saying "Entries for application 11 still exist in the extraction queue".
Below is my scenario:
I have 3 clients in the same R/3 system, Client 010, 020 and 030.
Clients 020 and 030 are connected to my BW system. Client 010 will be used for all development while test loads can be done from clients either 020 or 030. Till now, I have tested my data flows only from client 030. Now, I have to add some extra field to the structure in LBWE but facing the above mentioned error.
I went into LBWQ in both the client 020 and 030 and deleted the queue and then tried to change the extract structure in client 010 but still the same error.
What else do I need to do to resolve this?
Thanks,
RPK.Hi Raki,
We are still in development phase. I did all my developments(R/3) in client 010. Till now I did only full loads to BW from client 030 and haven't done any loads from client 020. My BW system is also connected to another sandbox client 100 but I haven't done any loads from that client aswell.
As I have to add some extra fields to the extractor from LBWE, I did the follwing steps in R/3:
1) I have deleted the setup tables from client 010, 020 and 030.
2) Deleted the data from LBWQ from clients 010, 020 and 030.
3) Trying to change the extract structure by clicking on "Maintenance" for the extractor in Client 010.
At this point it is throwing an error.
I thought that the client 100 might be a problem as I have transfer rules created in my BW system from this source system as well. As I do not need this source system anymore, I have deleted it from BW and tried changing the structure in LBWE but still the same problem.
Any ideas would be highly appreciated.
Thanks,
RPK. -
Error while accessing the transfer rules after installation
I get the status " Idoc type in the source system is not available" when i try to access the transfer rules of delivery service ,0sd_c04 infocube. can anyone help me to fix the error.
Hi Hari,
How you installed Transfer rules, is it through BC.
Check the Data Structure in Info Source , whether all fileds are available or not.
First delete Transfer structure and again propose the transfer rules, activate it.
Let us know status.....
Reg
Pra -
Error while transporting the Vendor in MM-SUS
HI
We are implementing SRM server 5.5 and follow a MM-sus scenario.
We were able to transport the vendor to SUS via BD14.
but now we are reciveing an error -
An error occured within an XI interface: Exception occurredE:BBP_BUPA:060 -Error while trying to create contact person. Inform system administration Programm: CX_BBP_BD_ERROR===============CP; Include: CX_BBP_BD_ERROR===============CM002; Line: 57</faultText>
</standard>
</nr1:StandardMessageFault>
Can some throw light on this error.
Previously when we transffered the vendor to SUS an user
was getting created in su01 which is not getting created.
2 When a vendor is transffered it creates a contact person "DO Not USE" why it that so ???
regards,
Nimish ShethHi,
Did you see the note 807812?
BR,
Disha.
Pls reward points for helpful answers. -
Error While Transporting the DSOs
Hi Experts,
I am transporting a DSO from DEV to QA in 7.0 system.While transporting the DSO, i am getting the below mentioned error.
The creation of the export DataSource failed
Reading the Metadata of APMD0009 ...
Creating DataSource 8APMD0009 ...
Password logon no longer possible - too many failed attempts
Password logon no longer possible - too many failed attempts
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object APMD0009
The transport request contains just the DSO and not the Export datsource.I have also tried exporting both together still it failed.
I have referred OSS note No.597326 for the same.But it didnt helped in resolving the issue.
Can anyone please help me out with this problem.
Thanks,
Shalaka.Hai shalaka,
jus check some points in u r transportation.
check the collection mode,grouping option - whether it is in dataflow before and after ,in data flow after,or in data flow before ,might be u have selected the in data flow before ,so the datasource error is happening here
check the datasource is from the same sap system or non sap system ,might be the system is having the password .so these are the problems check out and let me know the status of it and if it is solved by other means let me know
Suri.. -
Error while transporting the TR to production
Dear experts,
I am facing the issue of TR error while transporting it to PRD. I have already checked, the table is active both on DEV & on QUI. What should I do to transport this without any error? Thanks in advance.(Please find attached screenshot.)Hi,
this looks like you forgot a transport request or have transported in the wrong order.
Check that the table ZPLANTS is active (or has been activated with this transport request in step IMPORT).before the generation starts. Please check also the complete IMPORT protocol.
Regards,
Klaus -
Error while creating the Organization structure.
Hi,
I am trying to create an Organization structure in SRM 5 sytem, I have created a Root for the structure and when i try to click on the Attribute Inheritance or the Check tab below i am getting an error "Start program BBP_LOCATIONS_GET_ALL first (see note 563180 and long text)" but i have replicated one plant from the R/3 system using BBP_LOCATIONS_GET_SELECTED and the material groups and all the other relevant datas from R/3. I can see in the table BBP_LOCMAP the plant been associated with the relevant company code. I am now struck in creating the organization structure. I am not sure where i am going wrong while creating the Org model.Please give me your valuable inputs to overcome this error.
Regards
GGLGo to transaction SM30, table T77S0
Add an X to the following entry:
Group = EBP
Sem abbr. = LMIGR
Val. Abbr. = X
Description = Locations Successfully Migrated
This tell the system that the locations have been replicated and the error indicating location get all needs be executed will go away.
thanks,
justin
Edited by: Justin Farley on Feb 25, 2009 7:16 PM
Maybe you are looking for
-
Windows but not iTunes is recognizing the iPod
My friend has a 20 GB iPod (Gen. 4) and whenever he connects it to his Toshiba Satellite (running Windows XP and purchased in Taiwan) the computer pops up with a window asking if he wants to have the device open in Real Player, Windows Media Player,
-
Why won't my devices connect to the new WiFi airport?
New Wireless network has been set up via AirPort Extreme. no problem with linksys system with connections.. why won't my devices now connect wirelessly?
-
Search for contracts with "ship to party"
Hi, I am trying to search for contracts with a ship to party. We had a number of contracts input to SAP under one sold to party, now i I am trying to match sites to the contracts. I cannot seem to get a function to be able to search for them with jus
-
Adding background to Acrobat DC file makes large file
Help! In the past (as recently as Acrobat XI) I have made mail-merged envelopes using Microsoft Word, then added a background PDF of the envelope in Acrobat. In December a file of about 2700 pages was only a few megabytes. Today I made a file of only
-
I plugged my Playbook in to the computer and the desktop software told me there was a new update. I told it to down load it and it has been doing so now for 48 min. Still showing sys.Youtube and warns me not to unplug. What gives? does it really t