Error in Transporting Transfer rule/structure to Q for generic DS

Hi,
We're in NW2004s. we're getting error when we transport Transfer Rules and Structure of generic data sources to Q.
In R3 Q the DS is active and it pulls data in RSA3 and it is replicated and all the fields are available in BW side as well, but when we transport TR/TS i still get error saying the Datasource is not active. This happens only for generic ones.
Any idea.
thanks
Mayil

Hi,
have you inserted both the transfer rule and the communication structure in the same change request?
When you transport an InfoSource, all it's dependent objects must be present in the same change request; in this way the datasource will be activated.
I hope it helps you,
Vito

Similar Messages

Error when transporting transfer rules

Hi, i got an error when i transport transfer rules. i got the following errors in various transfer rules:
Mapping between data source 0CUSTOMER_ATTR and source system EMP300 is inconsistent
AND
Reference to transfer structure 0CUSTOMER_ATTR_BB not available. No activation possible.
I tried to activate the data sources and transport them several times, but i got the same errors. Checking manually i can see the data sources active in my source system, in development and productive instances.
Thanks in advance.
Diego Lombardini

Hello Diego
Do you choose the correct Transfer Structure in DEV?
I mean the one that is assigned to EMP300.
Are you saying that your PROD have the following:
0customer_text_BA
And that your DEV only have the following:
0customer_text_BB
If the answer to the above questions is YES;
Find out if some one has assigned ATTR to 0CUSTOMER directly in PROD or somebody has changed 0CUSTOMER_ATTR in DEV without transporting it to PROD.
I think that one way to resolve this problem is to use the option "overwrite origanls" in STMS.
Use it with caution and do not mass transport when you use this option.
Good luck
/FZA
Message was edited by: Fariborz Zangoui
Message was edited by: Fariborz Zangoui

Transport Error while moving Transfer rules - RS_ISMP_AFTER_IMPORT for object type(s) ISMP ( )

Hello Experts
Strucked up with an issue while transporting the Transfer rules that are created for an UPFILE source system.
Transport is included with list of Data source Replica, Transfer rules, Transfer structure and Info Package.
My data Source : ZVPRCRDT for an UPFILE
Below is my error screen :
Tried to resolve the error by moving the Data source Replica as an individual Transport.
Still see the same error and my data source is active in the current system.
Looking for a resolution to find out the root cause.
Any help is appreciated...

Thanks for your response Ram.
My Source System UPFILE is in active mode.
Unsure why system is throwing error as source system assignement was inconsistency.
All fields are mapped perfect with one-one relation.
Worked by reassigning the UPFILE - source system to the data source but still i m seeing the same error : Data Source doesnt exist in source system of version A.
Transported the DS alone to Quality initially where i m unable to find the transported data source in my quality(target). DO i need to perform replicate meta data ...something like that in quality so that imported data sources will get refreshed?
If so can you let me know the approach.
Thanks

Problem while transporting transfer rules in BW 3.5

Hi All,
I have a problem while transporting transfer rules in BW 3.5.
I have just checked the box for conversion to Transfer structure / Transfer rules of an infoobject and tried to transport it to quality. I got this below error message:
The selections T ZBW_ZBILLRATP_TEXT_BA specify more than one DataSource
Diagnosis
You need to select an individual DataSource based on the selection conditions
InfoSource =
Source System =
Object Version = T
Transfer Structure = ZBW_ZBILLRATP_TEXT_BA
although the select event is not unique.
Procedure
Check the objects to which the selection applies.
Reference to transfer structure ZBW_ZBILLRATP_TEXT_BA not available. No activation possible.
Message no. RSAR436
Diagnosis
Transfer structure ZBW_ZBILLRATP_TEXT_BA should be transported into this system.
However, no DataSource mapping refers to this transfer structure.
System response
The transfer structure was not activated or deleted.
Procedure
Ensure that DataSource mapping, with a reference to the transfer structure ZBW_ZBILLRATP_TEXT_BA is on the same transport request. Use the transport connection to create a consistent request.
Can any one provide me details of how to overcome this issue. I tried transporting all related objects.
Regards
Lakshmi

Hi Lakshmi,
Befor Transporting the Transfer rules, make sure that you are transporting the Active Versions of your Datasource & DataTarget between which your transfer rules exist.
Also make sure that the Transfer rules are active before it is transported.
Hope it helps!
Regards,
Pavan

How to find unsued Transfer Rules and Data Sources for a Master Table...??

How to find unsued Transfer Rules and Data Sources for a Master Table...?? My requirement is i need to delete those Transfer rules and Data Sources which are not in use

Hi
Go to manage of the Text or attirbute of the master data object, see what are being loaded daily from there and delete the remaining.
Cheer
Ans as expected, Please reward

Error in collecting transfer Rules in transport request after system copy

Hello,
Recently we had a system copy from Production to Test system.
We are trying to collect all the transfer rules from production in the transport request with the procedure which is given in the below link.
Re: Q: Transfer Rules after system copy
When we are trying to transport such objects, system first prompt for transportable workbench request, after specifying request once, it prompts for it again and after providing transport request number system results with message u201CSpecify a requestu201D.
Please suggest how to overcome this issue.

thats scary that you are copying your transfer rules from production to test system well if you guy sare doing it good luck..
a part from that make sure your prd is open so it allows items to be able to transport an dthere is a conenction between prd to test for transports to go through
if you have already copied all te data source to TEST, replicate them IN BWQ( your test system) then send over tranfer fules .
hope that helps.

Error in Infosource, transfer rules transportation

Hi
I transport the datasources from R/3-DEV to R/3-QA systems . And those are transported successfully. Then i replicated the datasources from
R/3-QA system to BI-QA system.
Now im trying to tranpsort the InfoSource, Transfer rules from BI-DEV to BI-QA system then it says that
<b>DataSource 1_CO_PA_COST does not exist in source system QS1CLNT400 of version A.
QS1CLNT400 - R/3 QA system.</b>
Pls let me know what i need to do
kumar

Hi Ravi,
check in RSA6 whether ur DS is there or not.
If it is not available,then check in STMS whether the transport has been imported or not.If you do not have authorisation to STMS,ask ur Basis guys to check that.
Thanks & Regards,
Suchitra.V

Transports(transfer rule)Problem

Hi Experts,
Bi Patch :16   BI_CONT :8
We are moving from DEV to QA.i ve transported infoareas,infoobject catalogs and infoobjects.
now im trying to transport master data infosources UR and transfer rules.
im collecting the objects in the following manner.
Ex:0material
Grouping :in data flow before
collection mode : automatic
Here im unable see the transfer rules but UR and infosources are there.(in transport connection screen)
Conversion of logical system names
in Dev i didnt maintain any thing
in QA i ve mainted Conversion of logical system names as
*Original S S            Target S S
BI DEV                     BI QA
R3 DEV                    QA DEV
I havnt chkd the box 7.0.
Assgnment of source system to source system id
here i clicked on suggest source system ids
i ve AU and AU.
Even i did a trail with transporting the request to QA but no luck it ended with error 4,but not getting anything even info source or UR etc.........
Plz help me,suggest me solution its very urgent.
Thanks,
Yunus

hii check the foll links and award some points
Re: Transfer rule error
Re: Transfer structure problem

Error while Transporting Update Rules.

hi xperts,
   I am getting Error while Transporting the Update rules,i already transported the INFOCUBE,INFOPACKAGE EVERYTHING.
    Start of the after-import method for object type R3TR ROUT (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for ROUT L
The errors affect the following components:
    BW-WHM (Warehouse Management)
Is the error,I didn't change any thing in the Cube or changes to Update rules.
Can anybody Help me?.
   thanking you,
                               with regards,
                               Narendra.

Hi,
Are you still facuing the issue ?
No need to worry about the routines, once you save the update rules if there is any routines in it it will be saved in the same request. If you want to check the routines you can check in the transport connections. Transfer the update rule to the right hand side of the screen and you can see all the routines that belong to the UR.
If you know the technical names of the routines you can check in the TADIR table.
Have you transported the info-sources for this update rules ? why not you again capture the info-source and the update rule in a single request and transport again.
Hope it helps.
Thanks,
Soumya

Error while transporting update rule.

Hi experts
I am trying to transport one update rule to production..
But it is ending with error code 8 n it is giving me following error :
      Errors when activating update rule XXX
      IC=0PP_DS03 IS=0CO_OM_OPA_6 error when checking update rules
Kindly tell me what need to be done now.
Regards
Swati

Hi Swati,
Before transporting the update rule, in the present scenario, you have to transport the infosource which contains the corresponding "0recordmode".
Whenever you transport anything into the quality or production, the list should be as followed in the given manner :
Seq No     Objects in Request
1     Package(DEVC), InfoArea(AREA), Application Component(APCO)
2     Function Modules
3     Keyfigure Catalog(IOBC), Keyfigures(IOBJ), Units(IOBJ)
4     Characteristic Catalog(IOBC), Characteristic Infoobjects(IOBJ)
5     Infosources (ISCS, ISTD, ISMP, ISTS, ISFS, ROUT) and
                Generic Data Sources(DataSrce Active Version(OSOA), ISMP, ISTS,DataSourceReplica (ISFS)
                and Tables (TABL)
6     Infoproviders(ODS(ODSO), Cube(CUBE), Infoset(ISET))
7     Update Rules(UPDR, ROUT)
8     Infopackages(ISIP)
9     Queries(ELEM)
10     Webtemplates(TMPL, BLTM, BPTM)
Just transport all your things in the above sequence, and it will be done successfully.
Also, remember there should not be any data in the corresponding infoprovider while you transfer the update rule, else it will fail.
Hope it helps,
Regards,
Neha.

Error while activating transfer rules

Transfer method 'TRFC with PSA' is not supported by the source system
Message no. RSAR508
Diagnosis
The PSA transfer method is used to transfer data from source system GBQ480 to transfer structure 0ASSET_ATTR_G4. Source system GBQ480 does not support a PSA transfer.
Procedure
Define the PSA in the source system.

Change Transfer method to PSA in Transfer rules and then activate. If PSA is selected, you will not face this error.
If you still face this error even after changing Transfer method, check below thread.
Transfer method 'TRFC with PSA' is not supported by the source system
Edited by: koundinya karanam on May 22, 2008 12:47 PM

Error while creating transfer rules.

Hi
I am creating transfer rules and a error message says " IS_00_BB does not exist". (IS_00) is the desc. of the info source)
can someone help me on this????
I had created transfer rules for another cube in the same info area, but no error had come then..
Thanks.
Aswath.

Hello,
The problem you are reporting could be that you are using the Transfer
Method 'IDOC' for the affected transfer rule(s). You should use the
'PSA' transfer method (rather than the 'IDOC' method), as the IDOC
method is very old.
If so, please change the transfer method in the affected transfer rules
to 'PSA', then try to activate the transfer structure again. This should
solve the problem, in which case, please let us know by clicking on the
'Close' button.
If the problem persists please create the report that is relevant for your system release
as per the SAP note 493422 and execute the report in your system, the report can be
created in se38, please talk to your basis team if you have problems creating the report.
Best Regards,
Des

Error in Transporting Update Rules

Hi,
I am transporting ODS, Info package and UPdate Rule from Dev to QA.
I request seems to be fine, but transport ended in error.
ODS, IP and UR got transported , but the UR is inactive.
and i dont havr the permission to activate that in QA system.
What could be the reason for inactive UR in QA.

I have done that also,
But it is giving error as :
Error when activating update rule 49U3N0VD2IJOOELH5APVBBIP1
Activation of the update rules for ZFY6_SDT ZIB_SHIPDAILY_TRAN
IC=ZFY6_SDT IS=ZIB_SHIPDAILY_TRAN error when checking the update rules
Start of the after-import method for object type R3TR UPDR (Delete Mode)
Update rules 49U3N0VD2IJOOELH5APVBBIP1 read in version M
Errors occurred during post-handling RS_AFTER_IMPORT for UPDR L
RS_AFTER_IMPORT belongs to package RS
The errors affect the following components:
    BW-WHM (Warehouse Management)
Please help me out, all the dependent objects are present in the QA
Dependent Objects:
Info Objects
ODS
Info Source
Transfer and comm str
Info pacakge

BI Content Error when activating transfer rule / SAPSQL_ARRAY_INSERT_DUPREC

Hello Experts,
when i want to iinstall the transfer rule /CRMBW/OLTP_OPPORTUNITY_ITEM
from Data Source /CRMBW/OLTP_OPPORTUNITY_ITEM to InfoSource
/CRMBW/OPPORTUNITY_I (all Business Content Objects) Iam facing the following situation:
1. When I use "Simulate Installation" i get the warning for all of the fields: Field APP_SERVER is not supported by DataSource /CRMBW/OLTP_OPPORTUNITY_ITEM in source system SLOGICOCRM. Transfer rules were deleted however, delivered.
2. When I use "Installation" i get a dump of the following type:
    Runtime Errors         SAPSQL_ARRAY_INSERT_DUPREC
    Except.                     CX_SY_OPEN_SQL_DB
    Error in the ABAP Application Program
    The current ABAP program "CL_RSAR_FORMULAS==============CP" had to be
     terminated because it had come across a statement that unfortunately cannot be executed.
    More details of the dump are:
    Trigger Location of Exception
    Program                                 CL_RSAR_FORMULAS==============CP
    Include                                 CL_RSAR_FORMULAS==============CM00E
    Row                                     40
    Module type                         (METHOD)
    Module Name                       GENERATE_ACTIVE_VERSION
The problem is, i can not map the transfer rule by myself because the the transfer structure contains some important Routines and Formulas which are missing in thereports and i dont know the source code they are using.
Can anybody help me?
Greetings from Barcelona
Oliver
Edited by: STRATESYS CONSULTING on Jul 23, 2009 2:35 PM

Hi Oliver,
Can you please check if you can use the SAP notes 1263075 and 985052 to resolve the problem?
Best Regards,
Des

Error when activate transfer rule 0DISTR_CHAN

Hi dear all,
I''ve a quesiton urgent, plz.
I've activated IO 0DISTR_CHAN, so his flow before and after. I went to load master data, but I found his transfer rule isn't yet activated. I tried to activated it but a error message like:
Error generating program
Message no. RSAR245
Diagnosis
An error occurred in the program generation:
Program / Template:   RSTMPL80
Error code / Action: 6
Row:        49
Message:    Statement concluding with "...LIKE" ended unexpect
Procedure
If the problem occurred during the data load or transport, activate the transfer rule.
If the problem persists, search in the SAP note system under 'RSAR 245'.
Please help!
Thanks a lot.
Juan

Hi dear all,
Thanks!
I tried to re-install this business content just with flow before. And It works.
Best regards.
Juan

Error in Transporting Transfer rule/structure to Q for generic DS

Similar Messages

Maybe you are looking for