Error in transpoting info object
Hello,
Need help to solve this please!
I am getting an error while tranporting an info object!
Error 1 with function module RSDRX_FILL_INITIAL_PQTABLE (Fill Master Data)
Message no. R7195
Diagnosis
Possible causes:
Function module DB_CREATE_TABLE
There is not enough room in the table space.
Procedure
In this case, check the logs on the database and extend the table space if it is too small.
Help me please!
Regards
RAm
Hello,
Help me to solve this !
I cant transport the info object !
It says:
Function module DB_CREATE_TABLE
There is not enough room in the table space.
Procedure
In this case, check the logs on the database and extend the table space if it is too small.
Help me!!
Regards
Ram
Similar Messages
-
Error while creating info object
error while creating info object a character
Info object may be a maximum of 000060 digits...... what would be the error?
Thanks ALLHi,
The maximum length supported by one CHAR type infoobject is 60. Check whether you have assigned more.
If you have to load more length ( more than 60) split the total thing into different infoobjects. Create different infoobjects and split the total thing into them - like 1st 60 char in 1st infoobject, char 61-120 in 2nd infoobject and so on. Then you can again concatenate them.
Thanks,
Indrashis -
Error in transporting info-object
Hello Experts,
We need to a import an info-object from Quality to Prod.
From Dev to Quality the transport was successful, but while transporting from
quality to prod we are getting the following errors:
Changes cannot be made, display user only
And as a result the info-object and hence the info-object,transfer rules/Transformation etc are
now inactive in the prod. enviornment.
Could anyone advice on what may be the source of this error??
Thanx and Regards
PriyankaHi Priyanka,
Pls check below threads, may be it will helpfull to you.
https://forums.sdn.sap.com/click.jspa?searchID=21045654&messageID=6758914
https://forums.sdn.sap.com/click.jspa?searchID=21045654&messageID=6720353
https://forums.sdn.sap.com/click.jspa?searchID=21045654&messageID=6407281
https://forums.sdn.sap.com/click.jspa?searchID=21045906&messageID=6758914
https://forums.sdn.sap.com/click.jspa?searchID=21045906&messageID=6407210
Thanks & Regards,
Ramnaresh .P. -
Error while creating Info Object in Info object catelog
Hi experts,
I'm making few info object in info object catelog but while activating system giving error mesage as "Error when generating master data routines"
can any one tell what's the problem and what needs to be done.
SumantraHi
let me know weather r u using any reference object which contain the routinee.
regards,
chandra. -
Error : Not all info objects trasferred successfully
I am getting this message when adding 0calmonth to catalog. Anyone has similar issue .
Hi,
First of all why you want move 0calmonth from one catalog to another one.
0calmonth is standard info object and it might be installed along with standard catalog.
What is the problem your facing if 0calmonth under old catalog.
Thanks
Chandra -
Error when activate Info Object
Hi everybody.
Maybeyou can help me.
I made a transport to the production system.
The system was disconnected when i made the transfer. The transportation has fail, however, has generated objects in the target system.
In particular I have a problem with a standard InfoObject (0GN_BWBEOTY).
This object was transported to Production environment but has been inactive.
I can not activate it.
I used the transaction RSRV InfoObjetct, to validate integrity and I get the following errors:
CL_RSMD_RS_0GN_BWBEOTY Class, Method IF_RSMD_RS_ACCESSS ~ get_text.
"RSBWBEOTY" is not defined in the ABAP Dictionary as a table.
I tried to move into a new transport order, the only InfoObject but I get error code 12.
Someone has happened, can you give me ideas? what can i can do?
Thank you very much for help me!Hi!
Thank you for your help.
I still have the problem .
I can not verify whether the information in master data, since the transported infoObjetct not appear in the RSA1 (production) and can not display the master data RSDMD trx.
And i can not activate through RSDG_IOBJ_ACTIVATE. I get the error message detailed in the first post.
This is the transport log:
| Program terminated (job: RDDEXECL, no.: 15123000)
| See job log
| Execution of programs after import (XPRA)
| End date and time : 20110519151246
| Ended with return code: ===> 12 <===
| ######################################
This is te JOB Log:
19.05.2011
15:12:31
Job started
00
516
S
19.05.2011
15:12:31
Step 001 started (program RDDEXECL, variant , user ID DDIC)
00
550
S
19.05.2011
15:12:31
All DB buffers of application server SFESA-20 were synchronized
PU
170
S
19.05.2011
15:12:36
Internal session terminated with a runtime error (refer to ST22)
00
671
A
|19.05.2011 |15:12:36 |Job cancelled
Any ideas?
Edited by: Javier Sarrelli on May 20, 2011 8:14 PM -
ERROR IN ACTIVATING INFO OBJECT
GETTING AN ERROR WHEN I TRIED ACTIVATING THE INFOOBJECT. ERROR I GOT IS,
" ERROR GENERATING MASTER DATA ROUTINES."This is an ABAP report which can be used to check the consistency of the Objects related to SID values, Nav attribute, Object versions, values check for MD attributes,,,etc...
In case of any errors, you can see the detailed log here and repair as well...
Pls use this to identify the errors in your IOBJ and correct accordingly!
Hope this helps.
-VA -
BI 7.0, BEX 3.5, Error while restricting info object
Hello gurus,
We are using BI 7.0 and Bex 3.5, MS office 2003,OS windows XP. While restricting infoobject, by right clicking on the infoobject and chosing the opiton restrict, we are encountering some error messages "fatal error terminating", "Automation error the object invoked has disconnected from its client", next error message is "Active X could not create the object".
Thanks & Regards
RahulHi Rahul
Iam also working on BI7.0 and Bex 3.5,i too encountered same problem. One way to resolve the problem is, consider below example
Suppose if u r trying to restrict 0Fiscper Infoobject, try to open variables and select the required variable in the Left column(i mean under Dimensions) then drag and drop that variable into rows or columns, then ur problem get's resolved.What i observed is, if we are trying to right click the infoobject and restrict it when it is in rows or column,then this is giving "fatal error and terminating from login.
Let me know if u need any further information.
Thanks
Raghu -
Error while activating info objects.
Hi,
After activating the data in ECC rsa5 and replicating it in BW rsa1, when i am trying to activate the infoobjects in object types i get the following error.
*DataSource 0RF_ARTHIER_ACT does not exist in source system DVMCLNT110 of version A *
kindly help me.
thanks.
- rohit mulayHi Rohit,
you can activate the datasource by using 'RSDS_DATASOURCE_ACTIVATE_ALL'program
Please follow bellow steps:
1.Goto SE38>give the Program>click on Execute.
2. Give the technical name of Datasource and Execute.
Note: there is one check box, first execute with that checkbox checked and see, if that didnt work, uncheck the checkbox and execute, hope this should solve your problem.
3. Replicate the Datasouce in BI side.
4. Activate the relavent Objects indevedulally.
Regareds,
Suman -
Error,Info Object 0CHNGID is requested.
Hi All,
I am new to BW/BI, and i am trying to upload data from flat file to BI system; I have uploaded the data successfully into PSA and then into InfoCube; But when i am trying to display the data in the cube i got some 4 errors, i managed to remove the 3 errors by successfully re-importing the missing infobjects from BI Content.
How ever i was not able to overcome this error; it says, "Info Object 0CHNGID is requested", i tried to search this info object in the BI System so that i can also re-import the same but it is not available.
So can anyone of you assist me to overcome this issue.
Thanks,
RaghuHi raghavendra...
Its there in the Business content check it. i had checked it just now.
Can u tell me how you are checking the 0CHNGID?
Goto RSA1 -- BI Content -- object types -- infoobject -- search for info object -- and install it.
Regards
KP -
How to reduce the length of the info object that's being used?
Hi All,
I have created info objects and used them in a DSO. Now I want to reduce the length of the info objects but i'm unable to do it. When I reduced the length and tried activating the Info object, it's giving me error and the info object is not getting activated. Please guide me how I can reduce the length and activate the Info Object.
Thanks
Hima BinduReducing the length of an infoobject is not that easy
Cleanest way -
Drop all transaction data for that infoobject
Drop all data in the DSO and cubes.
Reduce the length and then activate and transport all the infoobject and there dependence objects. -
I get the following errors when i try to activate an info object ( 0CO_AREA ) which is inactive under my info object tree and within the Business Content.
*+Error deleting document property /BI0/0CO_AREA*+
*Error when deleting document property*
*Error when activating Info Object 0CO_AREA*
*Error when generating master data routines*
**Error when resetting Info Object 0CO_AREA to the active version* "*Hi
Follow the steps
1. In the infobject menu delete the 0CO_AREA
2.Catch up the infobject 0CO_AREA in Business Content screen and say Install.
3.In AWB-->Modelling, search your infobject 0CO_AREA..and this time it shoul be active..
assign points if it helps.. -
Error in Transport the info object
Dear all,
i am trying to transport the info object 0CM_CTAR
during transpot i am getting the error as
Characteristic 0CM_CTAR: Unit 0UNIT_DIM no allowed in compounding
but i checked in development i not got any error but when i am trasport iam getting error.
Regards,
siva.HEllo,
Please see these OSS Notes
1139547 - Transport of InfoObjects RC = 8
1100575 - InfoObjects: Using units in compounding
The other way is to use a Z* object referenced to needed unit object in the compouding,
Regards,
Shashank -
Error while activating the info object.
Hi,
While activating one of the info objects, i am getting the following error message:
Characteristic 0BP_GRP: Cannot switch off InfoProvider property
Message no. R7B289
Diagnosis
The characteristic receives master data from other objects (for example, transformations or update rules). Therefore it is necessary to select the characteristic as an InfoProvider.
Procedure
If you want to deselect the Characteristic Is InfoProvider indicator, delete the corresponding objects in the data flow.
Thanks and Regards
Niren.Hi Niren,
Check the below thread..
Howto Remove 0Employee Char from my InfoArea
Hope it helps..
Regards,
Ramki. -
Error in char. Info Object
I have created the char . info object and in attributes gave the same char. and made it as navigational attribute. when i am trying to activate the info objecty i am getting the error
"Name of the Characteristic is Reserved".
Can nyone plz let me know how to resolve it.Hi,
Could you be a bit clearer? If you created a chrarcteristic infoobject and added the same in the attributes then its not possible and wrong.
An attribute must be a different infoobject.
For eg.
CHAR ATTr
MATID MATTYPE
You cannot have
MATID as the attribute of MATID.
Regards.
Maybe you are looking for
-
Compressor slow down after DVDSP/quicktime update
I am producing DVDs every week between 1 to 1.5 hours long. Usually takes compressor from 2 to 4 hours to render. After upgrading to DVDSP 4.1.2 and Quicktime 7.1.5 it has been 4 hours and the redering is just over half done. Activity monitor is show
-
Can't delete or find non existing files in Errors tab and in/out palette
I have two files (findlaw.html and cyrites.html) that no longer are in use that I want to trash. When I trash either of the files, I get 5 Missing Files in the Error Tab that are supposedly linked to these two files I want to trash. I've gone throug
-
Controlling Application Layer Firewall from Command Line Not Working
We are trying to manage the OS X Application Layer Firewall for Mountain Lion from the command-line. We have several hundred Macs that we need to manage and it isn't possible to have someone log in to each one to modify settings. We have used socketf
-
Premier CS6 - Error Compiling Movie, Unknown Error
Hello all, I am cutting Red 4k feature movie right now -- and everytime I try to export for preview for my director, it crashes in random time - 2sec, 4,sec, 22 sec, 13sec, all over the place. And it says Error Compiling MOvie, Unknown Error. I am g
-
Is this computer outdated or rather in need of service?
The computer is slow. My model ID is iMac5,2. My processor name is Intel Core 2 Duo. My processor speed is 1.83 GHz. My memory slots have 256 MB of DDR2 SDRAM, 667MHz. My memory is 512 MB. I check Activity Monitor earlier. It said I had 0 free MB of