Error in TSP

Hi All,
I am getting below error msg in publisher,
<App ID: Cisco CallManager
Message: : 65544: Jul 30 09:51:47.20 UTC : %CCM_CALLMANAGER-CALLMANAGER-3-TspError: Error in TSP. Port IsoEthPort:0 Port DSL:0 Name of Device:SEP002333228D55 Cluster ID:CCMHDFC Node ID:CMMUMPUB01>
I try to find this MAC id in CCM and Switches but its not there.
I am getting this error msg for 2-3 MAC addresses.
Please help me out.
Thanks & Regards,
Santosh

Hi
Firstly, I would make sure you are running the correct version of TSP as downloaded from your CCM (it changes when you upgrade or apply SRs).
If you are running the correct version I would refer back to the vendor of whatever application is using the TSP for support... if it's something common post back further information on the application and the problems it is causing you and someone may be able to help...
Regards
Aaron

Similar Messages

*ERROR* Failed m_WaveList- Init(). hr=0x80040154 with Cisco TSP

Cisco TSP 8.6(2.2).
I am trying to install Cisco TSP on a Windows 7 32bit workstation, but I am having issues. We are using a management program called "Connectwise". My boss wants to be able to dial a customer within the "Connectwise" program to log calls. Our other office has a Shortel phone system and Shortel's TSP program works fine. I've installed Cisco TSP, configured CTI ports, configured a CTI routepoint, enabled the user for CTI, and associated the user with the CTI ports/route point. When I try to dial a number within Connectwise, nothing happens. Within the Cisco TSP logs these errors are logged:
16:23:36.418 HDR|05/07/2012 CiscoTSP001.tsp,Error
16:23:36.418 |   CSelsiusTSPWaveList::Init() *ERROR* Failed to get ISelsiusNTWaveCtl interface.
16:23:36.419 |   SelsiusTSP::InitializeComObjects() *ERROR* Failed m_WaveList->Init(). hr=0x80040154
17:02:12.513 |   CSelsiusTSPLink::getMessage() *ERROR* Receive() failed with error 0.
I have tried to use the Windows "Dialer" program to test as well, but receive this error:
One or more telephone device drivers are incompatible with TAPI.DLL. Install an updated version.
I have installed Cisco TSP with both the WAVE driver and the new MEDIA driver. I receive the same error with either driver. I've also tried this on multiple workstations, but get the same error.
Help

I engaged TAC and the engineer pinpointed following error from the CTI Logs:
Login User Id:platju Reason code.:-1932787595
This is the Cisco documentation on this error code:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/jtapi_dev/8_6_1/constantfieldvalues.html
The engineer suspected LDAP server is not able to authenticate CTI based connections correctly although HTTP based connections (CCMUSER Web Page access) or JTAPI based connections (UCCX) are working fine.
We created an application user in CUCM and the Dialer.exe showed Cisco Line as expected. The engineer did assign all CTI roles (Not only Standard CTI Enabled) except Secure CTI ones. The End User didn't work no matter what we try.
As of now, I've asked the AD team to look at their side or engage Microsoft to debug it at their end. Hopefull that'll resolve the issue.

Error While Deploying .sda File in SDM

Hi,
We have developed some GP Applications. To transport the GP Application to production system we have builded .sda file from the development portal and deployed it in SDM. But its throwing an error while deploying.
Production system details:
OS : AIX (ppc64) 5.3
EP : NW2004s SP 9
Oracle : 10.2
We tried giving R/W permission to the .sda files after copying it in production. But still it throws the same error.
The error we got while deploying in SDM is :
Deployment started Wed Mar 21 20:44:49 GMT+05:30 2007
===========================================================================
Starting Deployment of
com/sap/caf/eu/gp/fnd/tsp/contentD86B5900D79E11DBB0E4000D60ECF782
Aborted: development
component 'com/sap/caf/eu/gp/fnd/tsp/contentD86B5900D79E11DBB0E4000D60ECF782'/'sap.com'/'LOCAL'/'20070321165517'/'1':Caught exception during
application deployment from SAP J2EE Engine's deploy
service:java.rmi.RemoteException: Cannot deploy application
sap.com/comsapcafeugpfndtsp~contentD86B5900D79E11DBB0E4000D60ECF782.. Reason: <--Localization failed:
ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle',
ID='/usr/sap/PEP/JC02/j2ee/cluster/server0/./temp/cafeugp~model/trareader1174490093196/xlfWork/caf.eu.gp.devobj/1B319881BE5E11DBBC21000D60ECF782/1B319881BE5E11DBBC21000D60ECF782.xlf (A file or directory in the
path name does not exist.)', Arguments: []--> : Can't find resource for
bundle java.util.PropertyResourceBundle,
key /usr/sap/PEP/JC02/j2ee/cluster/server0/./temp/cafeugp~model/trareader1174490093196/xlfWork/caf.eu.gp.devobj/1B319881BE5E11DBBC21000D60ECF782/1B319881BE5E11DBBC21000D60ECF782.xlf (A file or directory in the
path name does not exist.); nested exception is:
com.sap.engine.services.deploy.container.DeploymentException: <-
-Localization failed:
ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle',
ID='/usr/sap/PEP/JC02/j2ee/cluster/server0/./temp/cafeugp~model/trareader1174490093196/xlfWork/caf.eu.gp.devobj/1B319881BE5E11DBBC21000D60ECF782/1B319881BE5E11DBBC21000D60ECF782.xlf (A file or directory in the
path name does not exist.)', Arguments: []--> : Can't find resource for
bundle java.util.PropertyResourceBundle,
key /usr/sap/PEP/JC02/j2ee/cluster/server0/./temp/cafeugp~model/trareader1174490093196/xlfWork/caf.eu.gp.devobj/1B319881BE5E11DBBC21000D60ECF782/1B319881BE5E11DBBC21000D60ECF782.xlf (A file or directory in the
path name does not exist.) (message ID:
com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
Deployment of
com/sap/caf/eu/gp/fnd/tsp/contentD86B5900D79E11DBB0E4000D60ECF782
finished with Error (Duration 8944 ms)
Please guide me on how to solve this error.
Kind Regards,
Nirmal

Hi Dipankar,
I can't tell you the cause why you are facing this problem.
But I can suggest you a way that you can once again check the availability of plugins in your NWDS.
Contents of "gp_TopLevelDCs.zip" are
1) sap.com caf eu gp api wd.dcref
2) sap.com caf eu gp api.dcref
And
Location to Extract gp_TopLevelDcs.zip=>
C:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\CAF\SCs\sap.com\CAF\_comp\TopLevelDCs
Contents of "gp_api_nw04s.zip" are-->
1) api(folder)
Location to Extract gp_api_nw04s.zip=>
C:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\CAF\DCs\sap.com\caf\eu\gp
I'm using NWDS 7.0.06
Just check if this info can help you out.
Do make a reply if you stiil face the problem.
Regards,
Piyush

Can not get the Cisco TSP to show UP - 2003 64bit

Can not get the Cisco TSP to show up on the list of Providers in Phone and Modem Options- Advance tab. Installed ver. 4.1, it seems to install correctly, with no errors but when I restart the server, there is no Cisco TSP001.tsp in the providers list. It works perfectly on my Windows 2003 servers, but will not work on this new Windows 2003 64 bit server. Any tricks to getting this to load?
Thanks
Keith

Hi
There is no 64-bit TSP yet. Whilst 32-bit apps will work OK for the most part on 64-bit via the WoW function, drivers tend to not be so flexible, and that's what TSP is...
You'll have to bother your Cisco accounts folks to get this prioritised, it is upsetting a lot of people...
Aaron
Please rate helpful posts...

CUAC Advanced - Upgrading TSP 8.6.2 to 10.5.1

Hi,
I'm upgrading a customer's UC suite which includes CUAC.
The customer was previously running CUBAC 8.6.2, but I upgraded the AC server to CUAC Advanced 10.5.1. as the first step in the UC suite upgrades. So currently the TSP installed in CUAC Advanced matches their CUCM version of 8.6.2.
This Wednesday I'm upgrading the customer's CUCM to 10.5.1, my question is regarding the upgrade of the TSP file in CUAC. Do I need to uninstall the existing TSP, reboot, then install the new TSP and reboot. Or can I simply install the new TSP 'over-the-top' of the existing TSP and reboot once?
Dave

OK,
Just reporting back on my experience with this.
Once the migration of CUCM to 10.5.1 had completed, I opened the console to the CUAC server. There was a prompt on the server notifying me that CUAC had detected a different version of CiscoTSP running on CUCM. The prompt showed me that CUAC was running 8.6.2 and it detected 10.5.1. The prompt asked if I'd like to proceed with an 'automatic update' to 10.5.1.
'This is too easy' I thought... and it was. The installer bombed out with an error (I didn't pay attention to the cause). Anyway, the result was that I uninstalled the previous TSP, rebooted, installed the new TSP and ran through the 'add new hardware' wizard, then rebooted once more and all of the CTI devices registered to 10.5.1.
It looks like Cisco are trying to make things easier, which is a good thing - but in my case the auto update of TSP failed.
Dave

CUCM 8.6 TSP issue

Hi,
I've trouble making the TSP connection to a CUM 8.6 cluster.
I am using windows 7 64 Bit PC and installed the "CiscoTSPx64.exe" as a fresh, did a reboot and configured the required paramenters (CTI Server/Username PWD).
When I use dialer.exe, I don't see Cisco line available. When I go to install the WAVE driver, I don't see WAVE folder created. I searched for OEMSETUP.INF, couldn't find it anywhere.
I put the TSP client in trace mode which generated the output mentioned below. I am sure my username/pwd is correct as I can login to CUCMUSER webpage from the same PC.
I've tried installing TSP plugin from following CUCM versions:
CUCM version: 8.6.2.22900-9
CUCM Version: 8.6.2.20000-2
When I install 32 bit TSP client, I do see WAVE folder created but when I try to install it, it throws an error saying this application is not supported on 64bit OS.
++++++++++++++++++++++++++++++++++++++++++++++++++++
16:13:32.730 HDR|10/22/2012 CiscoTSP001.tsp,Special
16:13:32.730 |   ProviderOpenRequest::qbeTraceOut seq# =0x00000005
16:13:32.731 |   ProviderOpenRequest::qbeTraceOut {{0x00000104, 0x00000000}, 0xFFFFDDDD, 0x000D0001, 0x00000003, 0x00000020, 0x0000006C, 0x00000080}
16:13:32.731 |   ProviderOpenRequest::qbeTraceOut
        ProviderName             : {0x0000008C, 18, CiscoTSP 8.6(2.7) }
        LoginUserID              : {0x000000B0, 10, 5, 2, katr }
        ApplicationID            : {0x000000EA, 25, CiscoTSP001-172.20.40.26 }
        QBEClientVersion         : {0x0000009E, 18, CiscoTSP 8.6(2.7) }
        ProviderEventFilter = {0x000000DA, 16, 4} :
            {bDeviceRegistered: 0xFFFFFFFF, bDeviceUnRegistered: 0xFFFFFFFF, bDirectoryChangeNotify: 0xFFFFFFFF, bDeviceConfigChangedNotify: 0xFFFFFFFF}
        WantServerHeartbeat     : 0x0000001E
        CMAssignedApplicationID : 0x00000000
        PluginName              : {0x00000103, 9, CiscoTSP }
        bLightWeightProviderOpen: 0x00000000
        SingleSignOnTicket      : {0x00000000, 0, }
        AuthenticationType      : 0
        bOldDeviceLineFetch     : 0x00000000
16:13:32.734 |   ProviderOpenResponse::qbeTraceIn seq# =0x00000005 result =0x00000000
16:13:32.734 |   ProviderOpenResponse::qbeTraceIn {{0x0000008B, 0x00000000}, 0xFFFFDDDD, 0x000D0001, 0x00000004, 0x00000020, 0x00000034, 0x0000003F}
16:13:32.734 |   ProviderOpenResponse::qbeTraceIn
        Result          : 0x00000000
        ProviderInfo    : {0x00000054, 14, 8.6.2.20000-2 }
        ClientHeartbeat : 30
        ServerHeartbeat : 30
        PluginVersion   : {0x00000062, 10, 8.6.2.2-0 }
        PluginLocation : {0x0000006C, 39,
http://10.1.10.10/plugins/CiscoTSP.exe
        dwProviderId    : 117440522
        bisFIPSEnabled : 0x00000000
16:13:42.886 |   ProviderOpenCompletedEvent::qbeTraceIn {{0x00000091, 0x00000000}, 0xFFFFDDDD, 0x000D0001, 0x0000007E, 0x00000020, 0x00000048, 0x00000032}
16:13:42.887 |   ProviderOpenCompletedEvent::qbeTraceIn
        Reason           : 0x8CCC0075
        SequenceNumber   : 5
        ProviderInfo     : {0x00000068, 14, 8.6.2.20000-2 }
        ClientHeartbeat : 0
        ServerHeartbeat : 0
        Description      : {0x00000076, 33, Directory login failed - timeout }
        bMonitorCallPark : 0
        ProviderId       : 117440522
        DSCPForCTI2Apps : 0x00000000
        bEnableIpv6      : 0x00000000
        unicodeUserID    : {0x00000098, 2, 1, 2, }
        daysPswdToExp    : 4294967295
        totalDevices : 775040566
16:13:42.887 |   CQBEHelperBase::ProviderOpen() *ERROR* Provider open failed. result=-1932787595
16:13:42.887 |   ProviderClosedEvent::Trace
        dummyHeader.dwLen =28
        dummyHeader.dwType =0
        dwMagicCookie =0xFFFFDDDD
        dwProtocolVersion =0x000D0001
        dwPDUNumber =155
        dwHeaderSize =32
        dwFixedSize =4
        dwVariableSize =0
16:13:42.887 |   ProviderClosedEvent::Trace
16:13:32.730 HDR|10/22/2012 CiscoTSP001.tsp,Special
16:13:32.730 |   ProviderOpenRequest::qbeTraceOut seq# =0x00000005
16:13:32.731 |   ProviderOpenRequest::qbeTraceOut {{0x00000104, 0x00000000}, 0xFFFFDDDD, 0x000D0001, 0x00000003, 0x00000020, 0x0000006C, 0x00000080}
16:13:32.731 |   ProviderOpenRequest::qbeTraceOut
        ProviderName             : {0x0000008C, 18, CiscoTSP 8.6(2.7) }
        LoginUserID              : {0x000000B0, 10, 5, 2, katr }
        ApplicationID            : {0x000000EA, 25, CiscoTSP001-172.20.40.26 }
        QBEClientVersion         : {0x0000009E, 18, CiscoTSP 8.6(2.7) }
        ProviderEventFilter = {0x000000DA, 16, 4} :
            {bDeviceRegistered: 0xFFFFFFFF, bDeviceUnRegistered: 0xFFFFFFFF, bDirectoryChangeNotify: 0xFFFFFFFF, bDeviceConfigChangedNotify: 0xFFFFFFFF}
        WantServerHeartbeat     : 0x0000001E
        CMAssignedApplicationID : 0x00000000
        PluginName              : {0x00000103, 9, CiscoTSP }
        bLightWeightProviderOpen: 0x00000000
        SingleSignOnTicket      : {0x00000000, 0, }
        AuthenticationType      : 0
        bOldDeviceLineFetch     : 0x00000000
16:13:32.734 |   ProviderOpenResponse::qbeTraceIn seq# =0x00000005 result =0x00000000
16:13:32.734 |   ProviderOpenResponse::qbeTraceIn {{0x0000008B, 0x00000000}, 0xFFFFDDDD, 0x000D0001, 0x00000004, 0x00000020, 0x00000034, 0x0000003F}
16:13:32.734 |   ProviderOpenResponse::qbeTraceIn
        Result          : 0x00000000
        ProviderInfo    : {0x00000054, 14, 8.6.2.20000-2 }
        ClientHeartbeat : 30
        ServerHeartbeat : 30
        PluginVersion   : {0x00000062, 10, 8.6.2.2-0 }
        PluginLocation : {0x0000006C, 39, http://10.1.10.10/plugins/CiscoTSP.exe }
        dwProviderId    : 117440522
        bisFIPSEnabled : 0x00000000
16:13:42.886 |   ProviderOpenCompletedEvent::qbeTraceIn {{0x00000091, 0x00000000}, 0xFFFFDDDD, 0x000D0001, 0x0000007E, 0x00000020, 0x00000048, 0x00000032}
16:13:42.887 |   ProviderOpenCompletedEvent::qbeTraceIn
        Reason           : 0x8CCC0075
        SequenceNumber   : 5
        ProviderInfo     : {0x00000068, 14, 8.6.2.20000-2 }
        ClientHeartbeat : 0
        ServerHeartbeat : 0
        Description      : {0x00000076, 33, Directory login failed - timeout }
        bMonitorCallPark : 0
        ProviderId       : 117440522
        DSCPForCTI2Apps : 0x00000000
        bEnableIpv6      : 0x00000000
        unicodeUserID    : {0x00000098, 2, 1, 2, }
        daysPswdToExp    : 4294967295
        totalDevices : 775040566
16:13:42.887 |   CQBEHelperBase::ProviderOpen() *ERROR* Provider open failed. result=-1932787595
16:13:42.887 |   ProviderClosedEvent::Trace
        dummyHeader.dwLen =28
        dummyHeader.dwType =0
        dwMagicCookie =0xFFFFDDDD
        dwProtocolVersion =0x000D0001
        dwPDUNumber =155
        dwHeaderSize =32
        dwFixedSize =4
        dwVariableSize =0
16:13:42.887 |   ProviderClosedEvent::Trace
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Any help on this will be greatly appreciated.
thanks,
Kapil

Hi Zane,
We are using Microsoft AD as LDAP Server. We engaged Microsoft support who ran a utility on one of the domain controller and confirmed that LDAP authentication on port 3268 is successful.
TAC engineer later pointed out that we may be hitting the following BUG and advised an upgrade:
Bug ID: CSCts99665
CTI Authentication failure + OutOfMemoryError:
Curerrently waiting for an opportunity to ugprade our CUCM cluster.
thanks,
Kapil

Error when installing on Redhat

Hello, we have just downloaded the evaluation version of the Sun Global Desktop application and would like to test it to see if it suits our needs. We are actually testing this inside a virtual server (Linux Vserver) on CentOS 5 (basically the same thing as Redhat).
Installing the RPM works fine but when running /opt/tarantella/bin/tarantella start, I accept the license agreement and default installation settings, and I get the following output:
OK to use these settings? [Y]
Configuring your installation...
Running templates Setup script...OK
Running files_rename Setup script...OK
Running dbcreate Setup script...OK
Running extended_templates Setup script...OK
Running config Setup script...OK
Running printing Setup script...OK
Running sysadmin Setup script...OK
Running loadprobe_config Setup script...OK
chmod: cannot access `/opt/tarantella/var/serverconfig/global/t3hostdata/template.properties': No such file or directory
chgrp: cannot access `/opt/tarantella/var/serverconfig/global/t3hostdata': No such file or directory
chown: cannot access `/opt/tarantella/var/serverconfig/global/t3hostdata': No such file or directory
grep: /opt/tarantella/var/serverconfig/local/server.properties: No such file or directory
Configuring and starting Secure Global Desktop web server...OK
Running wcp/configchanges Setup script...OK
Running tsp/resources Setup script...java.util.MissingResourceException: Can't find bundle for base name cmdline.ErrorMessageStrings, locale en_AU
 at java.util.ResourceBundle.throwMissingResourceException(ResourceBundle.java:1521)
 at java.util.ResourceBundle.getBundleImpl(ResourceBundle.java:1260)
 <snip>
 at com.sco.tta.common.util.TarantellaApplication$1.run(TarantellaApplication.java:74)
 at com.sco.cid.common.RunnableThreadGroup.run(RunnableThreadGroup.java:129)
 at com.sco.tta.common.util.TarantellaApplication.run(TarantellaApplication.java:128)
 at java.lang.Thread.run(Thread.java:619)
2009/11/12 13:07:50.117 (pid 0) admin/misc/fatalerror #1257991670084
Sun Secure Global Desktop Software (4.5) FATAL ERROR:
Failed to load essential configuration.
Exception was: java.util.MissingResourceException: Can't find bundle for base name cmdline.ErrorMessageStrings, locale en_AU
 at java.util.ResourceBundle.throwMissingResourceException(ResourceBundle.java:1521)
 at java.util.ResourceBundle.getBundleImpl(ResourceBundle.java:1260)
 <snip>
 at com.sco.tta.common.util.TarantellaApplication.run(TarantellaApplication.java:128)
 at java.lang.Thread.run(Thread.java:619)
This program must now exit.
Ensure the adminconfig directory exists.
OK
Running 3270/resources Setup script...OK
Running 3270/configchanges Setup script...sed: can't read /opt/tarantella/var/serverconfig/local/xpe.properties: No such file or directory
OK
Running 3270/purge Setup script...OK
Running 5250/resources Setup script...OK
Running 5250/configchanges Setup script...OK
What's next?
Secure Global Desktop is now installed and ready to use.
To get started:
- In a web browser, go to:
 http://sgd.openhealth.com.au/
- When prompted, log in with username "Administrator" and root's password.
- On your webtop, click Administration Guide to learn more about the product.
To add license keys, type:
/opt/tarantella/bin/tarantella license add <key>...
sed: can't read /opt/tarantella/var/serverconfig/local/tuning.properties: No such file or directory
sed: can't read /opt/tarantella/var/serverconfig/global/cdm.properties: No such file or directory
sed: can't read /opt/tarantella/var/serverconfig/local/tuning.properties: No such file or directory
sed: can't read /opt/tarantella/var/serverconfig/local/tuning.properties: No such file or directory
/opt/tarantella/bin/scripts/jserverstart: line 242: /opt/tarantella/var/serverconfig/global/webauth.properties: No such file or directory
2009/11/12 13:07:56.006 (pid 19289) server/config/error #1257991676007
Sun Secure Global Desktop Software (4.5) ERROR:
The server configuration has been corrupted and can't be repaired.
The server can't start.
Reinstall Secure Global Desktop.
2009/11/12 13:07:56.134 (pid 19289) server/server/fatalerror #1257991676134
Sun Secure Global Desktop Software (4.5) FATAL ERROR:
JServer error: com.sco.cid.common.ApplicationError: config corrupt[Root exception is javax.naming.ConfigurationException: Bad provider.url [Root exception is java.io.FileNotFoundException: /opt/tarantella/var/serverresources/schema/attribute.conf (No such file or directory)]]
 at com.sco.tta.common.config.JndiServerConfigConstraints.checkHostObject(JndiServerConfigConstraints.java:135)
 at com.sco.tta.common.config.JndiServerConfigConstraints.run(JndiServerConfigConstraints.java:41)
 at com.sco.tta.common.config.JndiServerConfig.<init>(JndiServerConfig.java:164)
 at TTAServer.run(TTAServer.java:288)
 at java.lang.Thread.run(Thread.java:619)
com.sco.cid.common.ApplicationError: config corrupt[Root exception is javax.naming.ConfigurationException: Bad provider.url [Root exception is java.io.FileNotFoundException: /opt/tarantella/var/serverresources/schema/attribute.conf (No such file or directory)]]: Root exception is
javax.naming.ConfigurationException: Bad provider.url [Root exception is java.io.FileNotFoundException: /opt/tarantella/var/serverresources/schema/attribute.conf (No such file or directory)]
 at com.sco.jndi.provider.schema.SchemaContext.<init>(SchemaContext.java:122)
 at com
 <snip>
 at com.sco.jndi.provider.schema.AttributeSchemaContext.loadAttributeSchema(AttributeSchemaContext.java:105)
 at com.sco.jndi.provider.schema.AttributeSchemaContext.loadschema(AttributeSchemaContext.java:83)
 at com.sco.jndi.provider.schema.SchemaContext.<init>(SchemaContext.java:111)
 ... 20 more
There may be a problem with the JVM.
The server will exit.
Check the logs for more information.
2009/11/12 13:12:51.160 proxy/server #1
Sun Secure Global Desktop Software (4.5) FATAL ERROR:
The program has encountered an error that means it cannot continue.
It will now exit. A technical description is given below to help
establish the cause.
The JServer failed to restart.
The Secure Global Desktop server cannot continue to run.
Fix the problem which caused the JServer to fail to start.It looks as if the RPM file is missing some files however I'd imagine everyone else would be having the same problem. Any ideas?

Oh well looks like we'll have to go with citrix.

Adobe Acrobat update error: 1603 | 11.0.07/11.0.08/11.0.09

Hello,
i get an error when i try to update Acrobat Pro XI 11.0.06 to 11.0.07/11.0.08 or 11.0.09 with the msp files from the adobe download page.
In the end of the installation procedure the installer is doing a roll-back and the installation returns an error code 1603
- uninstall Adobe Acrobat and Reader , install Acrobat 11.0.0.0 and Update to 11.0.09 --> 1603
- uninstall Adobe Acrobat and Reader , execute the adobe cleaner tool and then install Acrobat 11.0.0.0 and Update to 11.0.09 --> 1603
- uninstall Reader und update Arobat --> 1603
- http://helpx.adobe.com/creative-suite/kb/error-1603-install-cs3-cs4.html
the update from 11.0.0 to 11.0.06 works without problems on my computers.
please help me!
the log file is too large to upload here the whole file.. But here is a short summary:
- Paket: Microsoft .NET Framework 2.0 x64
- Speicherort: http://www.microsoft.com/downloads/details.aspx?FamilyID=
b44a0000-acf8-4fa1-affb-40e78d788b00&displaylang=en
Property(S): RESERVED_APPNAME_PDAPP = PDApp.exe
Property(S): KBDOCLINK_ERROR_INVDRIVE = http://kb2.adobe.com/cps/404/kb404946.html
Property(S): WebLink = 0
Property(S): _WebLinkChecked = 1
Property(S): LANG_LIST_EXCEPTION = 0
Property(S): HotFix64_Link = http://www.adobe.com/go/ms_kb930627
Property(S): ADOBE_ACROBAT_DOCUMENT = Adobe Acrobat-Dokument
Property(S): AppsInUseUnknownAcrobatApps = Programme, die Adobe Reader oder Adobe Acrobat verwenden
Property(S): UnsupportedOS_HotFix = Dieses 64-Bit-Betriebssystem muss aktualisiert werden. Sie finden das Update unter http://www.adobe.com/go/ms_kb930627. Aktualisieren Sie Ihr System und führen Sie das Setup erneut aus. Das Setup wird jetzt beendet.
Property(S): REMOVE_A_CURRENT = ALL
Property(S): LangListMismatchError = LANG_LIST weist einige Gebietsschemaeinträge auf, die nicht mit dem Gebietsschema der Seriennummer übereinstimmen.
Property(S): _5789b66a5ab8e = {AC76BA80-0011-7760-0000-000000000000}
Property(S): BLOCK_APP_TIMEOUT = 300
Property(S): ProductLocale = de_DE
Property(S): NewProperty1 = 0
Property(S): BrandName = Adobe Acrobat XI Pro (11.0.09)
Property(S): BLOCK_ENTRYPOINT_LOGGING = 0
Property(S): ISReleaseFlags = MUI_PRO,MUI,PRO,PRO_ONLY,ROMAN,CHS_PRO,CHS,CHT_PRO,CHT,EFG_PRO,ISDP_PRO,JPN,JPN_PRO,KOR,K OR_PRO,RURT_PRO,SDFN_PRO,CHPS_PRO,ENU_PRO
Property(S): REBOOT = ReallySuppress
Property(S): ARPINSTALLLOCATION = C:\Program Files (x86)\Adobe\Acrobat 11.0\
Property(S): REINSTALL = Fonts,ARM,PDFMaker,Requirements,ViewerProgramFiles,AcrobatBrowserIntegration,Distiller,Ac robatElements,InstallCache,PDFMakerForProject,PDFMakerForOutlook,Adobe_AMT,PaperCapture,Pr eFlightPlugin,ViewerPlugins,AdobeCommonLinguistics,SearchAndIndex,PDFMakerForExcel11,PDFMa kerForPowerPoint11,PDFMakerForWord11,PDFMakerForExcelXP,PDFMakerForPowerPointXP,PDFMakerFo rWordXP,PDFMakerForExcel2K,PDFMakerForPowerPoint2K,PDFMakerForWord2K,PDFMakerForIE,Program ExtendedLanguageSupport,PDFMakerForLotusNotes,PDFMakerForAutoCAD,BatchSequences,AcroHelp_P rofessional,AutodeskFilters,PDFMakerForAutoCAD_2011,PDFMakerForExcel11_x64,PDFMakerForExce lXP_x64,PDFMakerForExcel2K_x64,PDFMakerForPPt11_x64,PDFMakerForPPtXP_x64,PDFMakerForPPt2K_ x64,PDFMakerForWord11_x64,PDFMakerForWordXP_x64,PDFMakerForWord2K_x64,PDFMakerForOutlook_x 64,PDFMaker_x64,AutodeskFilters_update,Distiller_x64,Common_de_DE,FormsCentral,ProOnly,PDF MakerForVisio,Distiller_de_DE,PDFMakerForMozilla,C3PO_Installer,Pro_de_DE,SevicesPlugin
Property(S): PRODUCTLANGUAGE = 0
Property(S): INSTALLMAJORVERSION = 11
Property(S): SourcedirProduct = {AC76BA86-1033-FFFF-7760-000000000006}
Property(S): PDFIFILTERX64 = {F6594A6D-D57F-4EFD-B2C3-DCD9779E382E}
Property(S): CANCEL_SET_IGNORE_AAM = 1
Property(S): DEFAULT_LAUNCH_URL_OLD = version:2|shell:3|hcp:3|ms-help:3|ms-its:3|ms-itss:3|its:3|mk:3|mhtml:3|help:3|disk:3|afp :3|disks:3|telnet:3|ssh:3|acrobat:2|mailto:2|file:1|rlogin:3|javascript:4|data:3
Property(S): DEFAULT_LAUNCH_URL = version:2|shell:3|hcp:3|ms-help:3|ms-its:3|ms-itss:3|its:3|mk:3|mhtml:3|help:3|disk:3|afp :3|disks:3|telnet:3|ssh:3|acrobat:2|mailto:2|file:1|rlogin:3|javascript:4|data:3|jar:3|vbs cript:3
Property(S): FeatureNamesToCheckInstallState_Patch = PDFMakerForIE;en_US;nb_NO;da_DK;zh_TW;zh_CN;sv_SE;pt_BR;nl_NL;es_ES;ko_KR;ja_JP;it_IT;fr_ FR;fi_FI;de_DE;cs_CZ;hu_HU;pl_PL;ru_RU;sk_SK;tr_TR;uk_UA;sl_SI;fr_MA;en_IL;en_AE;AutodeskF ilters_update;PDFMaker_x64;PDFMakerCommonSideCars;PDFMakerForAutoCAD;ProgramExtendedLangua geSupport;PDFMakerForLotusNotes;PDFMakerForMozilla
Property(S): DEFAULT_ATTACHMENT_WHITELIST_OLD = version:1|.ade:3|.adp:3|.app:3|.arc:3|.arj:3|.asp:3|.bas:3|.bat:3|.bz:3|.bz2:3|.cab:3|.ch m:3|.class:3|.cmd:3|.com:3|.command:3|.cpl:3|.crt:3|.csh:3|.desktop:3|.dll:3|.exe:3|.fxp:3 |.gz:3|.hex:3|.hlp:3|.hqx:3|.hta:3|.inf:3|.ini:3|.ins:3|.isp:3|.its:3|.job:3|.js:3|.jse:3| .ksh:3|.lnk:3|.lzh:3|.mad:3|.maf:3|.mag:3|.mam:3|.maq:3|.mar:3|.mas:3|.mat:3|.mau:3|.mav:3 |.maw:3|.mda:3|.mdb:3|.mde:3|.mdt:3|.mdw:3|.mdz:3|.msc:3|.msi:3|.msp:3|.mst:3|.ocx:3|.ops: 3|.pcd:3|.pi:3|.pif:3|.prf:3|.prg:3|.pst:3|.rar:3|.reg:3|.scf:3|.scr:3|.sct:3|.sea:3|.shb: 3|.shs:3|.sit:3|.tar:3|.taz:3|.tgz:3|.tmp:3|.url:3|.vb:3|.vbe:3|.vbs:3|.vsmacros:3|.vss:3| .vst:3|.vsw:3|.webloc:3|.ws:3|.wsc:3|.wsf:3|.wsh:3|.z:3|.zip:3|.zlo:3|.zoo:3|.pdf:2|.fdf:2 |.jar:3|.pkg:3|.tool:3|.term:3@@version:1|.ade:3|.adp:3|.app:3|.arc:3|.arj:3|.asp:3|.bas:3 |.bat:3|.bz:3|.bz2:3|.cab:3|.chm:3|.class:3|.cmd:3|.com:3|.command:3|.cpl:3|.crt:3|.csh:3| .desktop:3|.dll:3|.exe:3|.fxp:3|.gz:3|.hex:3|.hlp:3|.hqx:3|.hta:3|.inf:3|.ini:3|.ins:3|.is p:3|.its:3|.job:3|.js:3|.jse:3|.ksh:3|.lnk:3|.lzh:3|.mad:3|.maf:3|.mag:3|.mam:3|.maq:3|.ma r:3|.mas:3|.mat:3|.mau:3|.mav:3|.maw:3|.mda:3|.mdb:3|.mde:3|.mdt:3|.mdw:3|.mdz:3|.msc:3|.m si:3|.msp:3|.mst:3|.ocx:3|.ops:3|.pcd:3|.pi:3|.pif:3|.prf:3|.prg:3|.pst:3|.rar:3|.reg:3|.s cf:3|.scr:3|.sct:3|.sea:3|.shb:3|.shs:3|.sit:3|.tar:3|.taz:3|.tgz:3|.tmp:3|.url:3|.vb:3|.v be:3|.vbs:3|.vsmacros:3|.vss:3|.vst:3|.vsw:3|.webloc:3|.ws:3|.wsc:3|.wsf:3|.wsh:3|.z:3|.zi p:3|.zlo:3|.zoo:3|.pdf:2|.fdf:2|.jar:3|.pkg:3|.tool:3|.term:3|.acm:3|.asa:3|.aspx:3|.ax:3| .ad:3|.application:3|.asx:3|.cer:3|.cfg:3|.chi:3|.class:3|.clb:3|.cnt:3|.cnv:3|.cpx:3|.crx :3|.der:3|.drv:3|.fon:3|.gadget:3|.grp:3|.htt:3|.ime:3|.jnlp:3|.local:3|.manifest:3|.mmc:3 |.mof:3|.msh:3|.msh1:3|.msh2:3|.mshxml:3|.msh1xml:3|.msh2xml:3|.mui:3|.nls:3|.pl:3|.perl:3 |.plg:3|.ps1:3|.ps2:3|.ps1xml:3|.ps2xml:3|.psc1:3|.psc2:3|.py:3|.pyc:3|.pyo:3|.pyd:3|.rb:3 |.sys:3|.tlb:3|.tsp:3|.xbap:3|.xnk:3|.xpi:3
Property(S): SOURCEDIR = C:\Program Files (x86)\Adobe\Acrobat 11.0\Setup Files\{AC76BA86-1033-FFFF-7760-000000000006}\
Property(S): SUPPORTDIR = C:\Windows\TEMP\{AC76BA86-1033-FFFF-7760-000000000006}
Property(S): ALL_USERS_DOCUMENTS = C:\Users\Public\Documents\
Property(S): bIsPro = 1
Property(S): MsiLogFileLocation = c:\uhdlogs\AdobeAcrobat.log
Property(S): USERNAME = Dezernat 11.1
Property(S): COMPANYNAME = RP Giessen
Property(S): CURRENTDIRECTORY = B:\activate\95FE2F63-6A23-457C-84BC-DE7C893D14E0.itm\1.vol
Property(S): ProductToBeRegistered = 1
Property(S): ProductState = 5
Property(S): CLIENTUILEVEL = 3
Property(S): PackageCode = {7463CA64-F497-45FB-A84C-1BA3A908B2EB}
Property(S): TRANSFORMS = C:\Windows\Installer\{AC76BA86-1033-FFFF-7760-000000000006}\1031.mst
Property(S): P7.196A45B3_0387_4DF9_9420_597B6F2F9ADD = C:\Program Files (x86)\Common Files\Adobe\AdobeApplicationManager\AAMSetup\packages\P7\
Property(S): LOCALES = C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\AcroExt\locales\
Property(S): ACROEXT = C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\AcroExt\
Property(S): PLUG_INS_PAPERCAPTURE_IDRS15_OCRRES = C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\plug_ins\PaperCapture\iDRS15\OCRResources\
Property(S): PLUG_INS_PAPERCAPTURE_IDRS15 = C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\plug_ins\PaperCapture\iDRS15\
Property(S): WCIEACTIVE_X64 = C:\Program Files (x86)\Common Files\Adobe\Acrobat\WCIEActiveX\x64\
Property(S): PDFMAKER_AUTOCAD_2013_64 = C:\Program Files (x86)\Adobe\Acrobat 11.0\PDFMaker\AutoCAD\2013\64\
Property(S): MSPSRCAC76BA86A440FFFFA4407A8C40011009 = C:\Windows\Installer\5ef892.msp
Property(S): MsiRunningElevated = 1
Property(S): PATCHNEWPACKAGECODE = {DAFD831E-9F8C-46F7-ABAD-6CF538C89B69}
Property(S): PATCHNEWSUMMARYSUBJECT = Installers
Property(S): PATCHNEWSUMMARYCOMMENTS = Contact: Your local administrator
Property(S): ACR11009 = B:\activate\95FE2F63-6A23-457C-84BC-DE7C893D14E0.itm\1.vol\AcrobatUpd11009.msp
Property(S): Privileged = 1
Property(S): DATABASE = C:\Windows\Installer\3c4e3a.msi
Property(S): OriginalDatabase = C:\Windows\Installer\3c4e3a.msi
Property(S): UILevel = 2
Property(S): QFEUpgrade = 2
Property(S): ACTION = INSTALL
Property(S): WindowsSystemString = (Windows Vista 64-bit)
Property(S): IS_CURRENT_PDFOWNER = 1
Property(S): ROOTDRIVE = C:\
Property(S): UserLanguageID = 1031
Property(S): ACROPDF_RDR_EPM = 1
Property(S): PDFMAKER_AUTOCAD_2013 = C:\Program Files (x86)\Adobe\Acrobat 11.0\PDFMaker\AutoCAD\2013\
Property(S): VersionDatabase = 300
Property(S): VersionMsi = 5.00
Property(S): ServicePackLevel = 1
Property(S): ServicePackLevelMinor = 0
Property(S): MsiNTProductType = 1
Property(S): WindowsVolume = C:\
Property(S): RemoteAdminTS = 1
Property(S): NetHoodFolder = C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Network Shortcuts\
Property(S): PrintHoodFolder = C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Printer Shortcuts\
Property(S): WindowsBuild = 7601
Property(S): RecentFolder = C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Recent\
Property(S): GPTSupport = 1
Property(S): OLEAdvtSupport = 1
Property(S): ShellAdvtSupport = 1
Property(S): MsiAMD64 = 6
Property(S): Msix64 = 6
Property(S): Intel = 6
Property(S): PhysicalMemory = 8053
Property(S): VirtualMemory = 13877
Property(S): AdminUser = 1
Property(S): MsiTrueAdminUser = 1
Property(S): LogonUser = SYSTEM
Property(S): UserSID = S-1-5-18
Property(S): ComputerName = WKSxxxxxx
Property(S): SystemLanguageID = 1031
Property(S): ScreenX = 1024
Property(S): ScreenY = 768
Property(S): CaptionHeight = 22
Property(S): BorderTop = 1
Property(S): BorderSide = 1
Property(S): TextHeight = 16
Property(S): TextInternalLeading = 3
Property(S): ColorBits = 32
Property(S): TTCSupport = 1
Property(S): Time = 10:38:15
Property(S): Date = 24.10.2014
Property(S): MsiNetAssemblySupport = 4.0.30319.18408
Property(S): MsiWin32AssemblySupport = 6.1.7601.17514
Property(S): RedirectedDllSupport = 2
Property(S): ADDLOCAL = Common_en_AE,Common_en_IL,Common_fr_MA,Common_sl_SI,Common_uk_UA,Common_tr_TR,Common_sk_S K,Common_ru_RU,Common_pl_PL,Common_hu_HU,Common_cs_CZ,Common_fi_FI,Common_fr_FR,Common_it_ IT,Common_ja_JP,Common_ko_KR,Common_es_ES,Common_nl_NL,Common_pt_BR,Common_sv_SE,Common_zh _CN,Common_zh_TW,Common_da_DK,Common_nb_NO,Distiller_ko_KR,Distiller_sl_SI,Distiller_sk_SK ,Distiller_pl_PL,Distiller_nb_NO,Distiller_hu_HU,Distiller_fi_FI,Distiller_da_DK,Distiller _cs_CZ,Distiller_uk_UA,Distiller_tr_TR,Distiller_nl_NL,Distiller_it_IT,Distiller_pt_BR,Dis tiller_ru_RU,Distiller_sv_SE,Distiller_zh_CN,Distiller_ja_JP,Distiller_es_ES,Distiller_fr_ FR,Distiller_zh_TW,Distiller_fr_MA,Distiller_en_IL,Distiller_en_AE
Property(S): AS_HKCR_EXE = "C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\Acrobat.exe"
Property(S): PDFSHELL_LOCALSERVER_COMMAND = "C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\AcrobatInfo.exe" /PDFShell
Property(S): PDF_DEFAULTICON = C:\Windows\Installer\{AC76BA86-1033-FFFF-7760-000000000006}\_PDFFile.ico,0
Property(S): DEFAULT_PROGID = Acrobat
Property(S): PDX_DEFAULT_PROGID = AcrobatPDXFileType
Property(S): DEFAULT_PDF_PROGID = Acrobat.Document.11
Property(S): DEFAULT_CURVER_PROGID = Acrobat.Document.11
Property(S): PDF_PREVIEW_HANDERLER_DLL = C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\pdfprevhndlr.dll
Property(S): PDF_PREVIEW_HANDERLER_HELPDIR = C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\
Property(S): PDF_INPROCSERVER_VIEWERPS = C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\ViewerPS.dll
Property(S): PDF_ACROBROKER_PATH = C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\AcroBroker.exe
Property(S): LOTUS_DLL_PATH = C:\PROGRA~2\Adobe\ACROBA~1.0\PDFMaker\Mail\LOTUSN~1\PDFMLO~1.DLL
MSI (s) (CC:20) [10:38:15:543]: Produkt: Adobe Acrobat XI Pro - Update "Adobe Acrobat XI (11.0.09)" konnte nicht installiert werden. Fehlercode 1603. Weitere Informationen sind in der Protokolldatei c:\uhdlogs\AdobeAcrobat.log enthalten.
MSI (s) (CC:20) [10:38:15:543]: Ein Update wurde durch Windows Installer installiert. Produktname: Adobe Acrobat XI Pro. Produktversion: 11.0.09. Produktsprache: 1031. Hersteller: Adobe Systems. Updatename: Adobe Acrobat XI (11.0.09). Erfolg- bzw. Fehlerstatus der Installation: 1603.
MSI (s) (CC:20) [10:38:15:543]: Note: 1: 1729
MSI (s) (CC:20) [10:38:15:543]: Transforming table Error.
MSI (s) (CC:20) [10:38:15:543]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (CC:20) [10:38:15:543]: Transforming table Error.
MSI (s) (CC:20) [10:38:15:543]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (CC:20) [10:38:15:543]: Transforming table Error.
MSI (s) (CC:20) [10:38:15:543]: Transforming table Error.
MSI (s) (CC:20) [10:38:15:543]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (CC:20) [10:38:15:543]: Transforming table Error.
MSI (s) (CC:20) [10:38:15:543]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (CC:20) [10:38:15:543]: Transforming table Error.
MSI (s) (CC:20) [10:38:15:543]: Produkt: Adobe Acrobat XI Pro -- Configuration failed.
MSI (s) (CC:20) [10:38:15:543]: Das Produkt wurde durch Windows Installer neu konfiguriert. Produktname: Adobe Acrobat XI Pro. Produktversion: 11.0.09. Produktsprache: 1031. Hersteller: Adobe Systems. Erfolg- bzw. Fehlerstatus der neuen Konfiguration: 1603.
MSI (s) (CC:20) [10:38:15:543]: Attempting to delete file C:\Windows\Installer\5ef892.msp
MSI (s) (CC:20) [10:38:15:543]: Unable to delete the file. LastError = 32
MSI (s) (CC:20) [10:38:15:543]: Attempting to delete file C:\Windows\Installer\5ef893.mst
MSI (s) (CC:20) [10:38:15:543]: Unable to delete the file. LastError = 32
MSI (s) (CC:20) [10:38:15:559]: Deferring clean up of packages/files, if any exist
MSI (s) (CC:20) [10:38:15:559]: Attempting to delete file C:\Windows\Installer\5ef892.msp
MSI (s) (CC:20) [10:38:15:574]: Attempting to delete file C:\Windows\Installer\5ef893.mst
MSI (s) (CC:20) [10:38:15:574]: MainEngineThread is returning 1603
MSI (s) (CC:2C) [10:38:15:574]: No System Restore sequence number for this installation.
=== Protokollierung beendet: 24.10.2014 10:38:15 ===
MSI (s) (CC:2C) [10:38:15:590]: User policy value 'DisableRollback' is 0
MSI (s) (CC:2C) [10:38:15:590]: Machine policy value 'DisableRollback' is 0
MSI (s) (CC:2C) [10:38:15:590]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (CC:2C) [10:38:15:590]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (CC:2C) [10:38:15:590]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (CC:2C) [10:38:15:590]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (CC:2C) [10:38:15:590]: Restoring environment variables
MSI (s) (CC:2C) [10:38:15:590]: Destroying RemoteAPI object.
MSI (s) (CC:68) [10:38:15:590]: Custom Action Manager thread ending.
MSI (c) (98:88) [10:38:15:590]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (98:88) [10:38:15:590]: MainEngineThread is returning 1603
=== Verbose logging stopped: 24.10.2014 10:38:15 ===

Running into the same issue over here. It seems like it has to do with applying a transform to the installation, so it could be related with a particular setting put in place using the Adobe Customization Wizard.
It's really kind of hit or miss, because it appears to affect those with previous versions of Acrobat or Reader installed, but that isn't always the case.
Had this happen to systems that haven't had any sort of Adobe product installed prior.
It's always the same thing too. Error 1603 is spit out after it can't remove select files in C:\Windows\Installer
After digging through the system, the files that it's looking to delete aren't even there to begin with.

Error in Policy_Filter function

Ok, I'm getting an internal error when trying to execute a policy_filter of binary content to HTML.
This was working a week ago, but obviously we've transgressed the unwritten law.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, Oracle Label Security and OLAP options
SQL>begin
 ctx_ddl.create_preference(preference_name => 'binary_filter',
 object_name => 'AUTO_FILTER');
 ctx_ddl.set_attribute(preference_name => 'binary_filter',
 attribute_name => 'OUTPUT_FORMATTING',
 attribute_value => 'FALSE');
 ctx_ddl.create_policy(policy_name => 'binary_policy', filter => 'binary_filter');
end;
SQL> create synonym dc for production.doc_content;
SQL> create table foo (id number(9), bartext clob, barblob blob);
SQL> create or replace trigger bar_aui before insert or update on foo for each row
begin
 ctx_doc.policy_filter('binary_policy', :new.barblob, :new.bartext, false);
end;
SQL> insert into foo (id, barblob) select docid, docoriginal from dc where docoriginal is not null and rownum = 1;
Error report:
SQL Error: ORA-20000: Oracle Text error:
ORA-06512: at "CTXSYS.DRUE", line 160
ORA-06512: at "CTXSYS.CTX_DOC", line 1582
ORA-06512: at "KRETEST.BAR_AUI", line 2
ORA-04088: error during execution of trigger 'KRETEST.BAR_AUI'
20000. 00000 - "%s"
*Cause: The stored procedure 'raise_application_error'
 was called which causes this error to be generated.
*Action: Correct the problem as described in the error message or contact
 the application administrator or DBA for more information.Any insight would be... helpful.

I am guessing that the problem may be in some part that was left out in order to simplify it. Was this something that worked in 10g, but not 11g? I have noticed that 11g handles some things differently. 11g seems to do some automatic creation and freeing of temporary space and it causes problems if you try to do that as you did with 10g. I would check any case where you have used createtemporary or freetemporary or checked if something is null. Please see the simple demo below that works for me.
SCOTT@orcl_11gR2> begin
2 ctx_ddl.create_preference
3 (preference_name => 'binary_filter',
4 object_name => 'AUTO_FILTER');
5 ctx_ddl.set_attribute
6 (preference_name => 'binary_filter',
7 attribute_name => 'OUTPUT_FORMATTING',
8 attribute_value => 'FALSE');
9 ctx_ddl.create_policy
10 (policy_name => 'binary_policy',
11 filter => 'binary_filter');
12 end;
13 /
PL/SQL procedure successfully completed.
SCOTT@orcl_11gR2> create table doc_content
2 (docid number,
3 docoriginal blob)
4 /
Table created.
SCOTT@orcl_11gR2> create or replace directory my_dir as 'c:\my_oracle_files'
2 /
Directory created.
SCOTT@orcl_11gR2> insert into doc_content
2 values (1, utl_raw.cast_to_raw ('test data'))
3 /
1 row created.
SCOTT@orcl_11gR2> declare
2 v_blob blob := empty_blob();
3 v_bfile bfile;
4 begin
5 insert into doc_content values (2, empty_blob())
6 returning docoriginal into v_blob;
7 v_bfile := bfilename ('MY_DIR', 'banana.pdf');
8 dbms_lob.fileopen (v_bfile, dbms_lob.lob_readonly);
9 dbms_lob.loadfromfile (v_blob, v_bfile, dbms_lob.getlength (v_bfile));
10 if dbms_lob.isopen (v_bfile) = 1 then
11 dbms_lob.fileclose (v_bfile);
12 end if;
13 end;
14 /
PL/SQL procedure successfully completed.
SCOTT@orcl_11gR2> create synonym dc for doc_content
2 /
Synonym created.
SCOTT@orcl_11gR2> create table foo
2 (id number(9),
3 bartext clob,
4 barblob blob)
5 /
Table created.
SCOTT@orcl_11gR2> create or replace trigger bar_aui
2 before insert or update on foo
3 for each row
4 begin
5 ctx_doc.policy_filter
6 ('binary_policy', :new.barblob, :new.bartext, false);
7 end;
8 /
Trigger created.
SCOTT@orcl_11gR2> show errors
No errors.
SCOTT@orcl_11gR2> insert into foo (id, barblob)
2 select docid, docoriginal
3 from dc
4 where docoriginal is not null
5 and docid = 1
6 /
1 row created.
SCOTT@orcl_11gR2> update foo
2 set (id, barblob) =
3 (select docid, docoriginal
4 from dc
5 where docid = 2)
6 where id = 1
7 /
1 row updated.
SCOTT@orcl_11gR2> select id, bartext from foo
2 /
 ID
BARTEXT
 2
<HTML><BODY>
 
 
 
 
 
 
 
 
 
 
 
 
 
Fruit
of the Month Banana 
 
Bananas are the most popular fresh fruit i
n the United States. They have a peel that comes off easily, they ripen after
they've been picked, there is a generous supply all year, and they are inexpe
nsive. Bananas have both a high amount of carbohydrates as well as potassium,
which also makes them the fruit of choice for many athletes. (Wellness Encycl
opedia of Food and Nutrition, 1992). 
Selection 
Avoid bananas with brown spots that seem v
ery soft. Select those bananas with a nice color, specific for the variety. Ch
oose fruit that is firm and free of bruises. Best eating quality has been rea
ched when the solid yellow skin color is speckled with brown. 
 
 Bananas with green tips or with practic
ally no yellow color have not developed their full flavor. Bananas are overripe
when they have a strong odor. 
Storage 
To further ripen bananas leave at room temp
erature for a couple of days. Once ripe you can store in the refrigerator for 3
to 5 days. The peel may turn brown in the refrigerator, but the fruit will not
change. 
Varieties 
The very popular yellow banana of Cavendish
is the banana we see in grocery stores. However, Plantains, Finger Bananas and
Red Bananas are also popular varieties. Most all have a soft texture when ripe
. 
 
Make
Bananas Part of Your 5 A Day Plan 
• </fo
nt>Use sliced bananas in cereal, yogurt, or on a peanu
t butter sandwich. 
• </fo
nt>Carry bananas in your lunch or use as a snack. </fo
nt>
• </fo
nt>For a cool refreshing treat, cut a banana into chun
ks and put in the 
freezer. Take out in a couple of hours and
enjoy. 
 
 
 
 
 
 
 
 
 
 
Recipes
 
Banana
Nut Smoothie Makes 4 (1 cup) servi
ngs Each serving equals one 5 A Day serving Recipe source: Produce for Better
Health 
2 bananas, ripe 2 cups pineapple juice 2
Tbsp creamy peanut butter 2 tsp plain yogurt 1 ½ tsp vanilla extract 6 ice cu
bes 1 tsp nutmeg 
Combine all ingredients, except nutmeg, in
blender. Cover and run on high until smooth and well-blended. Sprinkle with nut
meg. 
Nutritional analysis per serving: calories
191, protein 3g, fat 5g, percent calories from fat 21%, cholesterol 0mg, carboh
ydrates 35g, fiber 2g, sodium 46mg 
Banana
Berry Jumble Makes 2 servings Eac
h serving equals one 5 A Day serving Recipe source: Produce for Better Health 
 
2 bananas, halved and cut into ½ inch piece
s ¾ cup cranberries, fresh or frozen ¼ cup oats ½ tsp nutmeg 
Combine all ingredients in a large, non-sti
ck skillet. Cook on medium-high heat just until cranberries begin to soften, st
irring occasionally. Remove from heat; cool slightly. Spoon into bowls and top
with whipped topping or frozen yogurt, if desired. 
Nutritional analysis per serving: calories
212, protein 4g, fat 2g, percent calories from fat 8%, cholesterol 0mg, carbohy
drates 50g, fiber 7g, sodium 2mg 
 
 Baked
Bananas with Orange/Lemon Sauce M
akes 4 servings Each serving equals one 5 A Day serving Recipe source: Produce
for Better Health/Carol Withers 
 
4 bananas ¼ cup orange marmalade 2 Tbsp l
emon juice 1 Tbsp grated orange peel 1 Tbsp grated lemon peel 2 mint sprigs (
for garnish, optional) 
Remove ends from bananas. With a knife, sli
t banana skin on the back of each banana from top to bottom, but leave the skin
on the banana (to keep the banana from bursting). Bake bananas in their skins
in a 375-degree oven for 20 minutes. Meanwhile, mix marmalade and lemon juice.
When done, remove bananas from oven and discard the skin. Center each banana on
a dessert plate. Pour 1½ Tbsps sauce over each banana. Mix orange and lemon p
eels and sprinkle 1½ tsps over each banana. Garnish with mint. 
Nutritional analysis per serving: calories
169, protein 2g, fat 1g, percent calories from fat 4%, cholesterol 0mg, carbohy
drates 43g, fiber 4g, sodium 2g 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Tropical
Pork Kabobs Makes 4 servings Each
serving equals one 5 A Day serving 
 
1 lb pork loin, boneless, cut into 3/4 inch
cubes 1/4 cup orange juice 1/4 tsp cinnamon 2 bananas, sliced 8 skewers, wo
oden (soak in water before using) or metal 1/3 cup orange marmalade 2 Tbsp hon
ey 1 can (15 oz) pineapple chunks 1 can (11 oz) mandarin oranges 
In a small saucepan, mix together the marma
lade, orange juice, honey and cinnamon. Stir over low heat until mixture bubble
s gently. Divide pork cubes into 4 equal parts and thread on 4 skewers. Fill re
maining 4 kabobs with pineapple, bananas, and mandarin oranges. Place fruit kab
obs on large plate and coat with glaze. Spoon remaining glaze over pork kabobs.
Grill or broil about 4 inches from heat source, turning and basting with glaze
frequently. Cook for 10 minutes or until lightly browned. Serve immediately wi
th fruit kabobs. 
Nutritional analysis per serving: calories
397, protein 23g, fat 9g, percent calories from fat 19 %, cholesterol 56mg, car
bohydrates 59g, fiber 2g, sodium 421mg 
 
 
</BODY></HTML>
1 row selected.
SCOTT@orcl_11gR2>Edited by: Barbara Boehmer on Mar 15, 2011 10:31 AM

Unity 4.2(1) and CME 4.1(0) Error - CME ports reregister every 60 seconds

Hello,
I have an integration between Unity 4.2(1) and CME 4.1(0) which, until Friday last week was working fine.
I got a complaint that users couldn't get theri voicemail and have found that the ports on CME unregister and register every 60 seconds (see below)
Has anyone seen this before and knows a solution.
I've checked that the TSP v8.2(1) is supported for both and I've completely removed the config from CME and redone, but no change.
Any Ideas ?
Thanks
Chris
MA-CAS-2851-01#
Apr 12 14:31:09.703: %IPPHONE-6-UNREGISTER_ABNORMAL: ephone-90:CAS-VI1 IP:10.15.28.111 Socket:14 DeviceType:Phone has unregistered abnormally.
Apr 12 14:31:09.707: %IPPHONE-6-REGISTER_NEW: ephone-90:CAS-VI1 IP:10.15.28.111 Socket:7 DeviceType:App has registered.
MA-CAS-2851-01#
Apr 12 14:31:29.931: %IPPHONE-6-UNREGISTER_ABNORMAL: ephone-91:CAS-VI2 IP:10.15.28.111 Socket:22 DeviceType:Phone has unregistered abnormally.
Apr 12 14:31:29.931: %IPPHONE-6-REGISTER_NEW: ephone-91:CAS-VI2 IP:10.15.28.111 Socket:14 DeviceType:App has registered.
MA-CAS-2851-01#

Hi,
I have already booted the server, had no choice as Unity shut down completely when I made a change in UTIM !
The only events I see are in the App log of EventViewer and they're merely telling me via a TSP error that a port has unregistered.
The Unity server has multiple integrations, ports : 24 to CM4, 6 to CM7 and 2 to CME. (32 ports in total)
Only the CME has any issues and it was working perfectly well for the last 3 months !
Any thoughts?
Chris

Code encountered error in 10g, but ok in 9i

What is the problem with this code ?
It works fine in Oracle 9i (9.2.0.4.0)
But it encountered an error when run in Oracle 10g (10.2.0.4.0 - 64bi), at
"{color:#0000ff}ave_rec(g_average_var).rec_1 := ave_rec(g_average_var).rec_1 + '12';{color}".
{color:#ff0000}ERROR at line 1:
ORA-01403: no data found
ORA-06512: at line 40{color}
Thanks/Rgds
tsp
<quote>
{color:#0000ff}Declare
Type averagerec is record
(rec_1 number := 0,
rec_1_cnt number := 0,
rec_2 number := 0,
rec_2_cnt number := 0,
rec_3 number := 0,
rec_3_cnt number := 0,
rec_4 number := 0,
rec_4_cnt number := 0,
rec_5 number := 0,
rec_5_cnt number := 0,
rec_6 number := 0,
rec_6_cnt number := 0,
rec_7 number := 0,
rec_7_cnt number := 0,
rec_8 number := 0,
rec_8_cnt number := 0,
rec_9 number := 0,
rec_9_cnt number := 0,
rec_10 number := 0,
rec_10_cnt number := 0,
rec_11 number := 0,
rec_11_cnt number := 0,
rec_12 number := 0,
rec_12_cnt number := 0,
rec_13 number := 0,
rec_13_cnt number := 0);
g_average_var number := 1;
Type averagerec_tab is table of averagerec index by PLS_INTEGER;
{color}
{color:#0000ff}
ave_rec averagerec_tab;
begin
{color}
{color:#0000ff}
ave_rec(g_average_var).rec_1 := ave_rec(g_average_var).rec_1 + '12';
dbms_output.put_line('ave_rec(g_average_var).rec_1 '||ave_rec(g_average_var).rec_1);
end;{color}
<un-quote>
Edited by: user6469330 on Jan 7, 2009 11:39 PM
Edited by: user6469330 on Jan 8, 2009 1:14 AM
Edited by: no one on Jan 8, 2009 5:45 PM
Edited by: no one on Jan 8, 2009 5:46 PM

Try the below:
Sybrand is right 10g is more fussy about your code being 'right'. 9i is doing an implicit initialisation for you where 10g does not.
Regards,
Harry
Declare
Type averagerec is record
(rec_1 number := 0,
rec_1_cnt number := 0,
rec_2 number := 0,
rec_2_cnt number := 0,
rec_3 number := 0,
rec_3_cnt number := 0,
rec_4 number := 0,
rec_4_cnt number := 0,
rec_5 number := 0,
rec_5_cnt number := 0,
rec_6 number := 0,
rec_6_cnt number := 0,
rec_7 number := 0,
rec_7_cnt number := 0,
rec_8 number := 0,
rec_8_cnt number := 0,
rec_9 number := 0,
rec_9_cnt number := 0,
rec_10 number := 0,
rec_10_cnt number := 0,
rec_11 number := 0,
rec_11_cnt number := 0,
rec_12 number := 0,
rec_12_cnt number := 0,
rec_13 number := 0,
rec_13_cnt number := 0);
g_average_var number := 1;
fred averagerec;
Type averagerec_tab is table of averagerec index by PLS_INTEGER;
ave_rec averagerec_tab;
begin
ave_rec(g_average_var):=fred;
ave_rec(g_average_var).rec_1 := ave_rec(g_average_var).rec_1 + '12';
dbms_output.put_line('ave_rec(g_average_var).rec_1 '||ave_rec(g_average_var).rec_1);
end;

Scaling images and Out of memory error

Hi all,
Does anyone knows why this code throws an out of memory error?
It loads an image (2048x1166 pixels) and saves it at bufi1 (BufferedImage). After that:
1- Rescale bufi1 to bufi13A (x3).
2. Rescale bufi1 to bufi12 (x2).
3. Rescale bufi1 to bufi13B (x3).
At 3, the code throws an oome. Why?
Thanks in advance!
import java.io.*;
import javax.imageio.*;
import java.awt.geom.*;
import java.awt.image.*;
public class TestScalePercent {
public static void main(String[] args) {
    TestScalePercent tsp=new TestScalePercent();
    BufferedImage bufi1=null;
    try {
      bufi1 = ImageIO.read(new File("foo.png"));//2048x1166 pixels
    } catch (Exception e){
      e.printStackTrace();
    BufferedImage bufi13A=tsp.scale(bufi1,3,3);//--> OK
    BufferedImage bufi12=tsp.scale(bufi1,2,2);//--> OK
    BufferedImage bufi13B=tsp.scale(bufi1,3,3);//-->OOM error!
public BufferedImage scale(BufferedImage bufiSource, double scaleX, double scaleY){
    AffineTransform tx = new AffineTransform();
    tx.scale(scaleX,scaleY);
    AffineTransformOp op = new AffineTransformOp(tx, AffineTransformOp.TYPE_NEAREST_NEIGHBOR);
    BufferedImage bufiop=op.filter(bufiSource, null);//--> Creates the OOM error...
    return op.filter(bufiop, null);
}

How much memory does your machine have?
That image is quite large. If my math is correct and
assuming the image has 32-bit color the original
image takes up 76.5 megs of memory by itself. Then
you are trying to create three other versions of it.
It isn't lying to you, it is indeed probably running
out of memory to hold the images.OK. Now I'm wondering if is it possible to free memory between bufi13A - bufi12, and bufi12 - bufi13B? I've tried to invocate the garbbage collector but nothing happens...
Thanks!

Unable to connect to the server.. Error Data : API_NOT_INITIALIZED on CUEAC Server Installation

Hi all,
I am trying to install CUEAC Attendant Server on Windows Server 2008 R2, tried several times. First, it got stuck on the Databahse Wizard. After three reinstalls, it still got stuck but somehow built the configure database named CFGATT and then started installing TSP. Finally, the setup has been finished and I went to the WebAdmin page. After I entered the login information, it gave an error : "
Unable to connect to the server.. Error Data : API_NOT_INITIALIZED"
I searched through the forum and found this topic :
https://supportforums.cisco.com/message/1215763
Here I found that there's a bug and I tried to do the fix myself as instructed :
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCte44454
However, it changed nothing, looking forward to your responses.
Regards,
Fikri

Fikri,
It is not working as this is not a supported environment, the current release is not supported on Windows Server 2008 R2.
The next release (April 2013) will support that version of Windows Server.

Project 2013: Error: One or more categories of approval could not be loaded

We recently upgraded to 2013 from 2007. Now some of my Resource mgrs who are also PM's are getting this message on the approval screen:
Error: One or more categories of approval could not be loaded
I figured out it's the timesheets that are not displaying, but even deleting and resubmitting them does not change the message. Has anyone else encountered this issue? It seems to be related to the security, but I haven't figured out which permission
is missing.

Hi there,
This is a
currently unfixed known bug with Project Server 2013 at least up until Oct 2013 CU caused when PM's delete tasks/assignments after the task has already been added to a user's timesheet.
You could turn off single entry to make this go away - but many people actually rely on actuals from timesheets coming through to their projects.
The other way to fix this (temporarily) is to delete and re-create the affected timesheets.
When you navigate to the approval center and receive the "Error: One or more categories of approval could not be loaded" message, check the ULS log you will see a message like this:
Node Consistency Error: Exception loading Assignment. Uid=6c5a411f-1f80-e211-a2cb-001e37e5967d
Selecting from the database with this Uid will tell you which user's timesheet is corrupt.
Personally I use a SQL script like this:
SELECT
ts.TimesheetName,
tsr.ResourceName,
tspe.PeriodName
,tsp.ProjectName,
tst.TaskName
FROM
[ProjectServer].[dbo].[MSP_TimesheetLine]
tsl
inner join
MSP_Timesheet ts
on tsl.TimesheetUID
= ts.TimesheetUID
inner join
MSP_TimesheetResource tsr
on ts.OwnerResourceNameUID
= tsr.ResourceNameUID
inner join
MSP_TimesheetProject tsp
on tsl.ProjectNameUID
= tsp.ProjectNameUID
inner join
MSP_TimesheetStatus tss
on ts.TimesheetStatusID
= tss.TimesheetStatusID
inner join
MSP_TimesheetTask tst
on tsl.TaskNameUID
= tst.TaskNameUID
inner join
MSP_TimesheetPeriod tspe
on ts.PeriodUID
= tspe.PeriodUID
inner join
[ProjectServer].[pub].[MSP_TIMESHEETS]
pubTs
on pubTs.TS_UID
= ts.TimesheetUID
where
tsl.AssignmentUID
= '6c5a411f-1f80-e211-a2cb-001e37e5967d'
and pubTs.TS_STATUS_ENUM
= 1
I then create a delegate as that user - go and take a screenshot of the timesheet, delete it, and recreate it.
Undelegate, go back to the approval center, if the error is still there, then look at the ULS log, rinse and repeat.
(As you can tell - this is part of my weekly routine)
Cheers,
James.
James Boman - http://www.boman.biz Software Consultant for IPMO - http://www.ipmo.com.au

MGW error logs for Cpu utlization

Dear All
We are using Cisco AS5400 as mgw, we often found during call peak hrs thsi mgw's showing error logs for cpu utlization. I have following questions in regards to thsi error.
1. why this error logs comes?
2. where & what we need to chcek? any hardware or IOS issue?
3. main and important thing whether during such error logs there is load on MGW and due to over cpu utlization call which attempt on MGW may failed? if yesy its failed with MGW end or failed from source end as abondan? or else if MGW disconnect then what is ISDN casue code.
we are using PGW in signalling or nailed mode.
Please help me with this
Regards
Amit--

Hi
Thanks to both of you
Here is log for Cpu utilization status during peak time as we see this error logs during peak time only
show proc cpu sorted | excl 0.00
CPU utilization for five seconds: 78%/36%; one minute: 73%; five minutes: 70
P
ID Runtime(ms)   Invoked      uSecs   5Sec   1Min   5Min TTY Process
216   646931668 841788064        768 10.40% 9.81% 9.32%   0 CCH323_CT
211   723978128-1124958350          0 5.48% 5.51% 5.36%   0 VOIP_RTCP
77   437021944-2113488726          0 4.91% 4.60% 4.53%   0 IP Input
63   368724284 712553243        517 3.93% 3.96% 3.69%   0 ISDN
207   226701532 790289944        286 3.52% 2.89% 2.68%   0 VTSP
61      262232    529665        495 2.03% 2.16% 1.04%   0 AFW_application_
206   319808168-1186847347          0 2.62% 2.27% 2.16%   0 DSMP
233       37460     57790        648 1.63% 1.10% 0.02%   0 AFW_application_
   3      293876    595003        493 1.63% 2.38% 2.06%   0 AFW_application_
205    70108356 455758882        153 1.06% 0.72% 0.74%   0 Resource Monitor
245   129219428 972383769        132 0.90% 0.93% 0.01%   0 ISDN L2 Process
208    43246508 321780241        134 0.57% 0.38% 0.37%   0 TSP
   4    35595820 258014603        137 0.57% 0.32% 0.32%   0 EDDRI_MAIN
37   162961592 35154923       4635 0.40% 0.53% 0.56%   0 Per-Second Jobs
200    33113344 140290609        236 0.32% 0.56% 0.53%   0 CC-API_VCM
198    35068732   7031070       4987 0.16% 0.13% 0.13%   0 Compute load avg
175    15677516 144379255        108 0.16% 0.08% 0.08%   0 AAA SEND STOP EV
33    16841100 32895103        511 0.16% 0.07% 0.06%   0 Net Background
92     6052176 398473472         15 0.08% 0.04% 0.02%   0 RUDP Main Proces
On this MGW we have full E1 means 16 E1s & total calls we observed during this is around 458 to 482 active callslls.
our MGW IOS is 12.4(22) & we are not using Radius AAA.
Mpneers,
Can you tell me i can see few logs like callid rejected. means at that time that call rejected within MGW. so such failed call failed as what Abondon or what is ISDN cause code?
Please help me with this
Amit--

Error in TSP

Similar Messages

Maybe you are looking for