Error in TX  SPAM

Hi all ,
I was trying to update my SPAM form 26 to 37. it was hang in between and I had restart the transaction. now I am not able to use the TX SPAM again.
Now when entry the tx SPAM is throwing an ABAP dump error " Syntax error in program "SAPLOCS_CORE ".
Error in the ABAP Application Program
The current ABAP program "SAPLSPAM" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "SAPLOCS_CORE " in include
  "LOCS_COREU01 " in
line 605:
"Field "GC_TYPE_XML" is unknown. It is neither in one of the specified "
"tables nor defined by a "DATA" statement. ."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "SAPLSPAM" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
please help me out in this
regards
sen

Hello,
Is this coming with support pack 14  of SAP Basis 701?
Anyways double check if the import is over. What normally would have happened that the system is  inconsistent at the moment. Once the support pack import is complete  it would become consistent and the dump won't occur. Some include might have got changed but some table fields/structures it might have been referring to may not yet got changed.
Regards.
Ruchit.

Similar Messages

  • Getting error while importing SPAM update

    hello ,
    We are getting folowing error while updating SPAM :
    The import was stopped, since an error occurred during the phase
    CHECK_REQUIREMENTS, which the Support Package Manager is unable to
    resolve without your input.
    After you have corrected the cause of the error, continue with the
    import by choosing Support Package -> Import queue from the initia
    screen of the Support Package Manager.
    The following details help you to analyze the problem:
        -   Error in phase: CHECK_REQUIREMENTS
        -   Reason for error: TP_CANNOT_CONNECT_SYSTEM
        -   Return code: 0208
        -   Error message: error in transportprofil (param missing,
            unknown,...)
    Also checked tp connect SID getting error :
    This is tp version 340.16.41 (release 640)
    E-TPSETTINGS could not be opened.
    EXIT
    ERROR: System : Parameter SAPEVTPATH not set. Batch jobs cannot be started.
    Error in TPSETTINGS: transdir not set.
    tp returncode summary:
    TOOLS: Highest return code of single steps was: 0
    ERRORS: Highest tp internal error was: 0208
    tp finished with return code: 208
    I also checked the permissions , all are right...
    any help would be appreciated...
    thanks
    Anju

    Hi,
    Please find the below I think it may help you :
    CHECK_REQUIREMENTS
    This phase checks various requirements for importing a Support Package. This phase may terminate for the following reasons:
    ¡        TP_CANNOT_CONNECT_TO_SYSTEM: tp cannot log on to the database of the system.
    ¡        QUEUE_NOT_EMPTY: There are incompletely processed OCS requests in the tp buffer. Use the following tp command to display these requests:
         tp SHOWBUFFER  -D SOURCESYSTEMS= TAG=SPAM
    You can only continue to import the queue after these requests have been completely processed, or deleted from the tp buffer.
    Regards
    Sreedhar Reddy.A

  • SAP Installation RFC LOGON FAILED- SQl ERROR ON PROGRAM SPAM (SAPMSSY1)

    Dear Gurus,
    during the SAP installation, i got the RFC logon failed error: SQL Error on program SPAM (SAPMSSY1)
    I am pasting the disp_w0 file.....................
    http://www.4shared.com/file/89058633/ac7a0547/_2__dev_w0.html
    pls let me know the how to lovve this.
    the basic error is like....
    Generating ABAP/4 Program SAPMS380                                .
    A  Source SAPMS380                                 Line 8.
    A  Error Code GEN_SOURCE_FORMAT.
    A  Module  $Id: //bas/620/src/krn/gen/screads.c#7 $ SAP.
    A  Function sc_getstring Line 624.
    A  Error when reading program SAPMS380
    Its showing this kinda error for a max of program like SAPMSSY1, SAPMSSY2, SAPMS380 and lots more which are clearly depicted in disp_w0 file.
    what is the error??? is there any error in program SAPMSSY1??
    if this is true pls let me know hot to solve this? where i can access this SAPMSSY1 ?? remember i can not use any T-code like SE36 as my installation is not finished.
    Kindly have a detail look on the disp_w0 file.
    Abhishek

    HI
    can u tell me how 2 acces the ABAP program like SAPMSSY1 etc. without entering into SAP by T-code.
    as i can not login right now. i want to do certain changes in these programs.
    Abhishek

  • Error while updating SPAM

    Hi,
    I am getting the error TP_CANNOT_CONNECT_SYSTEM while doing SPAM Update in CRM 7.0. My kernel patch level is 55.
    Even i have upgraded with latest tp and r3trans.
    Please suggest me the solution.
    Regards
    Karunakar

    Hi Karunaker, Did you tried re-importing SPAM version again from SPAM transaction.
    Try <Import SPAM/SAINT  update> again and let us know if you still face the same error then as said by Sourabh.
    Please paste the SLOG and ALOG files log to have further analysis on it.
    Hope it helps.
    Regards, Amber S | ITL
    Edited by: Amber S on Mar 5, 2010 1:13 AM

  • Error while importing SPAM version 7.0/33 Tp ended with error code 12.

    Hi all,
    Os: Windows 2003 advanced server
    DB: MaxDB 7.6
    SAP: NetWeaver 2004S - (ABAP+JAVA) EP
    When i was trying to import latest SAPM on the system. V 7.0/33 it got stopped in the middle at
    IMPORT_PROPER phase.
    Please find the error as follows:
    The import was stopped, since an error occurred during the phase
    IMPORT_PROPER, which the Support Package Manager is unable to resolve
    without your input.
    After you have corrected the cause of the error, continue with the
    import by choosing Support Package -> Import queue from the initial
    screen of the Support Package Manager.
    The following details help you to analyze the problem:
         -   Error in phase: IMPORT_PROPER
         -   Reason for error: TP_STEP_FAILURE
         -   Return code: 0012
         -   Error message: OCS Package SAPKD70033, tp step "R", return code
             0012
    Notes on phase IMPORT_PROPER
    In this phase repository objects and table entries are imported. This
    phase can terminate due to the following reasons:
    o   TP_INTERFACE_FAILURE: The tp interface could not be called.
    o   TP_FAILURE: The program tp could not be executed. For more
         information on this, see the SLOG or ALOG log file.
    o   TP_STEP_FAILURE: A tp step could not be executed. To find the cause
         of the error, see the appropriate log, such as the import log.
         If the cancelation message contains a tp step 6, N or S, the step in
         question is independent of the transport request. You can find these
         logs under the node Import steps not specific to transport request
         in the log overview.
         Alternatively, you can find these logs in the following files in the
    log directory of your transport directory (usually:
    /usr/sap/trans/log):
    -   tp Step 6: P<YY><MM><DD>.<SID>
    -   tp Step N: N<YY><MM><DD>.<SID>
    -   tp Step S: DS<YY><MM><DD>.<SID>
    You can display these files using the report RSPUTPRT or by calling the
    transaction AL11.
    A prerequisite of the Support Package Manager is that the Change and
    Transport System (CTS) is configured correctly. For more detailed
    information, read the online documentation available from Help -> SAP
    Library -> mySAP Technology Components -> SAP Web Application Server ->
    Change and Transport System .
    A list of the most important SAP Notes for Online Correction Support
    (OCS) is available in SAP Note 97620, which is updated regularly.
    In the import log file the errors was :
    Program terminated (job: RDDEXECL, no.: 14444101)
    Job log for this job is ;
    Job started
    Step 001 started (program RDDEXECL, variant , user ID DDIC)
    All DB buffers of application server nanadual were synchronized
    ABAP/4 processor: SYSTEM_RUDI_INVALID
    Job cancelled
    Please let me know if you need more details...
    Best Regards,
    Nanda

    Hi Nanda,
    Please check your trans log for further details .
    It cud be caused due to unavailability of RDDIMPDP batch job which is mandatory for any SPAM / SP updates to work.
    If this is the case you wud require to trigger the batch job RDDIMPDP using report RDDNEWPP(From SE38). This needs to be triggered in 000 as well as other existing clients too.
    once this is done please resume your SPAM Update. it shud go ahead.
    Next possibility that you cud check is updating your tp / R3trans with latest available from Service market place.
    Hope this helps you.
    Regards,
    Prem

  • ERROR UPDATE SAINT SPAM 700 level 35

    Hi we have a problem with application of packages SPAM/SAINT Update - Version 700/0035,
    login in client 000
    transaction spam -> goto -> import logs -> support package
    Log Overview for SAPKD70035
    SAPKD70035              SPAM/SAINT Update - Version 700/0035
            SID        System SID
    Generate Transport Information File      03.08.2009 23:43:04    (0) Successfully Completed
    Import Request Piece List                03.08.2009 23:43:07    (4) Ended with Warning
    Test Import                              03.08.2009 23:43:10    (4) Ended with Warning
    Import ABAP Dictionary Objects           03.08.2009 23:43:25    (4) Ended with Warning
    ABAP Dictionary Activation               03.08.2009 23:44:11    (4) Ended with Warning
    Import steps not specific to transport request
                       ABAP Dictionary Distribution             03.08.2009 23:44:16    (0) Successfully Completed
                       Activate inactive runtime objects        03.08.2009 23:44:45    (8) Ended with errors
                       Feedback after export or import          03.08.2009 23:44:49    (0) Successfully Completed
                       Activate inactive runtime objects        03.08.2009 23:46:17    (8) Ended with errors
                       Feedback after export or import          03.08.2009 23:46:21    (0) Successfully Completed
    In Activate inactive runtime objects        03.08.2009 23:44:45    (8) Ended with errors
    Contain next text:
    23:44:21: Retcode 1: error in DDL statement for STACKHEADR                     - repeat
    Error 170-Line 1: Incorrect syntax near '('. when executing ADD-FIELD of
    Error STACKHEADR when executing ADD-FIELD of
       No DDL commands found for activation of STACKHEADR
    23:44:33: Retcode 1: error in DDL statement for SWFEATUREINC                   - repeat
    Error 170-Line 1: Incorrect syntax near '('. when executing ADD-FIELD of
    Error SWFEATUREINC when executing ADD-FIELD of
    No DDL commands found for activation of SWFEATUREINC
    PLease Helpme
    BEST REGARDS
    Luis Cupa

    Hi Digesh Joshi
    The error persist.
    Steps of reset.
      we try reset via sapmmc intance abap and java.  restart instance abapo and java it's ok.
    enter System SME:
    transaction spam
    menu --> EXTRAS
    option --> RESET STATUS
    option  --> SPAM/SAINT update
    The system send message:
    Status of the SPAM/SAINT update has been reset
    Message no. TN159
    SPAM/SAINT update is being processed
    SPAM status: RED
    Import phase:     PROLOGUE
    THEN SELECT MENU: support packages
    option: Import SPAM/SAINT update
    and send the next error:
    Activation of sample nametabs with appended fields
    (dummy, do not translate)
    (dummy, do not translate)
    12:07:02: Retcode 1: error in DDL statement for STACKHEADR                     - repeat
    Error 170-Line 1: Incorrect syntax near '('. when executing ADD-FIELD of
    Error STACKHEADR when executing ADD-FIELD of
    (dummy, do not translate)
    No DDL commands found for activation of STACKHEADR
    12:07:14: Retcode 1: error in DDL statement for SWFEATUREINC                   - repeat
    Error 170-Line 1: Incorrect syntax near '('. when executing ADD-FIELD of
    Error SWFEATUREINC when executing ADD-FIELD of
    (dummy, do not translate)
    No DDL commands found for activation of SWFEATUREINC
    2 shadow nametab activations resulted in errors
    Begin:  Activation of shadow nametabs with DDL (2009/08/04 12:07:02)
    End:    Activation of shadow nametabs with DDL (2009/08/04 12:07:26)
    Begin:  Activation of shadow nametabs with DDL (2009/08/04 12:07:26)
    (dummy, do not translate)
    Please Helpme
    Best Regards
    Luis Isaac Cupa Rosales

  • Error while confirming SPAM/SAINT patch through Solution Manager MOpz

    Hi,
    When I am confirming patches (release 700) in Solman through maintenance optimizer, it is allowing to confirm all except the SPAM/SAINT update version 700/0027.
    For the SPAM/SAINT patch, it is giving error "Object <some number> update error".
    Please let me know what to do.
    Thanks & Regards,
    Kunal.

    @sean i said him alternate way of downloading the patch of SPAM/SAINT 30 when he is unable to download from MOpz
    I always try to give alternate possible ways to resolve the problem.
    Regards
    Uday

  • Error SPAM update SAPKB70017

    Dear all
    when updating SPAM for BASIS SAPKB70017 there is error like this :
    SPAM status:           (Error stop)
    Import phase:     PREPARE_XPRA
    when I check st22, there is 5 syntax error
    the first one is  Syntax error in program "SAPLSCP2 ".
    Error in the ABAP Application Program
    The current ABAP program "SAPLOLEA" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
    The following syntax error occurred in program "SAPLSCP2 " in include
    "CL_GUI_ALV_GRID===============CU " in
    line 127:
    "Type "IF_ALV_PRINT_PARAMETER_PROXY" is unknown"
    The 2nd is :  Syntax error in program "SAPLSUSM ".
    The 3rd is : Syntax error in program "SAPLSDOC ".
    The 4th is : Syntax error in program "CL_DB6_CALENDAR_CFG===========CP ".
    The 5th is : Runtime Errors         LOAD_PROGRAM_LOST
    Program "SAPLBTCH" was modified during the run.
    Can anybody help me, what should I do to continue patching??
    thanks a lot
    rgds,
    Della

    Hi Rosa,
    I too faced the similar issue while applying the Patch please follow the below procedure through which i was able logon successfully.
    1. Take a valid Backup.
    2. Ensure that no more TP and R3trans are running at OS level.
    3. Ensure that the entry in the transport buffer for SAPKB70013 is still available, check that with
    tp showbuffer <SID> pf=/usr/sap/trans/bin/TP_DOMAIN_<SID>.PFL tag=spam
    If the entry of SAPKB70017 is still available, ensure that TRBAT and TRJOB tables are empty (check at DB level)
    4. then start the main import manually using the command
    tp r3i SAPKB70017 DS2 pf=/usr/sap/trans/bin/TP_DOMAIN_<SID>.PFL tag=spam -Dclientcascade=yes -Drepeatonerror=8
    (all in one line)
    this step will take more time , after this step finished with return code 0 or 4, i become able to logon to the system and i completed the queue from SPAM tcode
    Thanks,
    Sandeep Singh DS

  • Too low SPAM version - EHP installation

    Dear All,
    during Configuration step in EHP installer I've got such error:
    Checks after phase PREP_CONFIGURATION/SPAM_CHK_INI were negative!
    Last error code set: SPAM version 26 is too low, at least version 40 is required. Apply latest SPAM patch
    Installer already extracted files from download directory and there was also SPAM/SAINT 701/0042 - it was added to download basket by solution manager.
    I was thinking about updating SPAM/SAINT by downloading newest version and perform the update in SPAM transaction, but option 'Import SPAM/SAINT update' for some reason is disabled. Why? What can I do to go ahead with update?
    Thanks in advance.

    Indeed using client 000 it is enabled. Firstly I had some errors with tpparam, but already fixed it. Now I'm facing:
    A newer version of data type "PAT10B" was found than one required
    Program: SAPLOCS_ALM
    Include: LOCS_ALMU03
    Row: 197
    Module type: (FUNCTION)
    Module Name: OCS_ALM_REPORT_QUEUE_STATUS
    anyone could help?

  • TP causes message in SLOG0706.SMP in log directory - SPAM Hung

    Hi
    I started the import of a queue of support packs in SPAM to the SMP system (Basis 7.00 , SM 4.0) 
    After running for a few hours overnight there was a TCP/IP problem and at the 3rd last package the SPAM showed an error in the IMPORT_PROPER phase the reason being  TP_INTERFACE_FAILURE.
    I restarted the import (obviously not the right thing to do!) and shortly afterwards although SPAM is showing it is doing the MAIN IMPORT step, nothing is happening - as the SLOG0706.SMP  has lots of the following entries since I restarted the SPAM transaction:
    WARNING: /usr/sap/trans/tmp/SAPKKITL417.SMP is already in use (1070), I'm waiting 4 sec (20070209074827).
    My name: pid 11357 on <hostname> (smp03)
    Looking at the pid, I find it is the OS job  TP running and complaining about the SAPKITL417 which was the 3rd last package in the queue (last one to import is SAPKITL419).
    There are  2 files in the tmp transport directory related to it from last night-
    SAPIITL417.SMP        *STMF     SMPOFR           3083687  Feb 08 23:22
    SAPKKITL417.SMP       *STMF     SMPOFR               314  Feb 08 23:20
    The  log directory has the following file since the SPAM was restarted:
    Browse : /sapmnt/trans/log/P070209.SMP                                                                               
    ETP199X######################################                                   
    ETP172 MOVE OF NAMETABS                                                         
    ETP101 transport order     : "ALL"                                              
    ETP102 system              : "SMP"                                              
    ETP108 tp path             : "tp"                                               
    ETP109 version and release : "370.00.09" "700"                                  
    ETP198                                                                          
    ETP399XMove Nametabs started in batch mode.                                     
    ETP399   processing modeflag 'A'                                                
    ETP301 -
    ETP364 Begin: Act. of Shadow-Nametabs ("2007/02/09 06:54:07")                   
    ETP301 -
    ETP301 -
    ETP338XActivation of Shadownametabs                                             
    ETP301 -
    ETP301 -
    ETP365 "0" Shadow-Nametabs activated                                            
    ETP362 "0" Shadow-Nametab activations failed                                    
    3 ETP362 "0" Shadow-Nametab activations failed                                       
    2 ETP364 Begin: Act. of Shadow-Nametabs ("2007/02/09 06:54:07")                      
    2 ETP366 End:   Act. of Shadow-Nametabs ("2007/02/09 06:54:07")          
    In SM12 there are 2 lock entries from when the import started yesterday
    000     POWEM     08.02.2007     E     PAT01     ####################     1     0
    000     POWEM     08.02.2007     E     CWBNTHEAD     9999999999####     0     1
    In PAT01 there are entries for each package in the queue and the reason field has  TP_INTERFACE_FAILURE
    Table:          PAT01
       PATCH                SEQUENCE STEPNAME
       SAPKA70009           003      IMPORT_PROPER
       SAPKA70010           010      IMPORT_PROPER
       SAPKB70009           001      IMPORT_PROPER
       SAPKB70010           002      IMPORT_PROPER
       SAPKIPYJ79           004      IMPORT_PROPER
       SAPKIPYJ7A           011      IMPORT_PROPER
       SAPKITL417           006      IMPORT_PROPER
       SAPKITL418           009      IMPORT_PROPER
       SAPKITL419           015      IMPORT_PROPER
       SAPKNA7006           007      IMPORT_PROPER
       SAPKNA7007           013      IMPORT_PROPER
       SAPKU50006           008      IMPORT_PROPER
       SAPKU50007           014      IMPORT_PROPER
       SAPKW70009           005      IMPORT_PROPER
       SAPKW70010           012      IMPORT_PROPER
    e.g.
    PATCH         SAPKITL417
    SEQUENCE      6
    STEPNAME      IMPORT_PROPER
    STEPCOND      ?
    RET CODE
    MESSAGE
    REASON        TP_INTERFACE_FAILURE
    SCENARIO      S
    VALID CONJ    1
    What should I do to fix this?
    thanks
    Michael

    Hi,
    We are currently struck with the same error message and SPAM is hung. The message in SLOG bieng" WARNING:
    rpmsap8\sapmnt\trans\tmp\SAPKKITL414.SM1 is already in use (1200), I'm waiting 2 sec (20070222184527). My name: pid 7556 on rpmsap8 (sm1adm)
    But I am not able to rename the file currently SAPKKITL414.SM1. It says file is already being used by other program.
    Please Advice at the earliest!
    Antarpreet

  • Error Applying BASIS Support Patch 10

    Dear all,
    I am facing syntax errror when i apply basis support patch 10.When i try to enter any T code its give me syntex error.
    And spam status show error stop IMPORT_PROPER
    Runtime Errors         SYNTAX_ERROR
    Date and Time          30.12.2008 01:31:48
    Short text
         Syntax error in program "SAPLKKBL ".
    What happened?
         Error in the ABAP Application Program
         The current ABAP program "SAPLSALV" had to be terminated because it has
         come across a statement that unfortunately cannot be executed.
         The following syntax error occurred in program "SAPLKKBL " in include
          "CL_SALV_BS_DATA_TABLE=========CU " in
         line 20:
         "The type "T_TYPE_CELL" is unknown."
         The include has been created and last changed by:
         Created by: "SAP "
         Last changed by: "SAP "
    Please help me out for this error.
    Regards,
    Kumar

    Hi,
    Firstly, do you have a backup to fallback in a worse case situation?
    Is the import still running at the OS level - please check whether there is any active tp process at the OS level and the import log files in the DIR_TRANS/tmp directory getting updated ? What are the contents of the files?
    Cheers

  • ABAP/4 processor: LOAD_PROGRAM_LOST error

    Hi,
    One of my job got failed , the errer message wwhich iam getting is
    "ABAP/4 processor: LOAD_PROGRAM_LOST"
    can anybody tell me wht could be the reason for this
    Thanks
    Yogesh Gupta

    Hi,
    The problem could be related to   SPAM updates
    Symptom: Three runtime errors can occur when you import a SPAM update:
    - LOAD_PROGRAM_LOST
    - SAPSQL_SELECT_WA_TOO_SMALL
    - SAPSQL_SELECT_TAB_TOO_SMALL
    - SAPSQL_WA_TOO_SMALL
    These errors occur because SPAM is modified when running.
    LOAD_PROGRAM_LOST occurs when SPAM is loaded back into the local program buffer and a different version exists on the database.
    Solution: These errors no longer occur when you restart Transaction SPAM and
    continue applying the SPAM update.

  • TP ERROR

    Hi all,
    I am having a TP error in spam. I am trying to update spam version from 21 to 24.
    It stopped during the phase IMPORT_OBJECT_LIST.
    When I checked the TP connection in stms it gave the below info that TP is fine.
    RFC Link              tp was started successfully
    tp Version            372.03.35 (n .ow.unkn)
    DB Connect            Link to database successful
    Offline Call          tp started in background.
    The error code in spam is 0212.
    Pls suggest a resolution
    Regards,
    Subhash

    Dear,
    Is there any relevant information in the latest SLOG* ? (under usr/sap/trans/log)
    Please send us its contents.
    regards,
    Lucio Rodrigues

  • Spam wrongly installed

    Hi,
    i installed SAP NETWEAVER 7.0 enhancement package 2. after installation i upgraded kernel to the latest availabe version, and also the  spam. for spam the default version  it came along with installation is SAPKD70237. Now i am trying to update it to the latest, i downloaded & i applied  SAPKD70044. after lot of time SPAM version SAPKD70044 was installed. Now i realized that i did a mistake and want to apply SAPKD70243.  
    when i try to update spam  the below  error  is  coming
    SPAM/SAINT update SAPKD70243 has a lower version (0043) than SPAM (0044)
    Please help
    Sarat

    Hi Sarat,
    If your spam version is displayed as 7.02/44 then you must have applied SAPKD70244 and not SAPKD70044 - because it would not allow you to install the incompatible version. The error mentioned in your first post suggests the same.
    Could you please re-verify the same ?
    Try updating the SPAM version to SAPKD70245 once its available.
    Are you getting any issue while defining a SP queue?
    Regards,
    Varun

  • SPAM crash: Table SI_WD_FIRST_MAIN_SCREEN could not be activated

    Hi!
    I am facing with the problem of hanging SPAM patch (SAPKB13 - 16).
    The patch will be stopped in the phase IMPORT_PROPER (step: DDIC activation) after few seconds.
    The error is:
    SPAM
    IMPORT_PROPER
    Reason: TP_STEP_FAILURE
    Return-code: 0008
    Error message: OCS package SAPKB70013, step "A", return code 0008
    I looked into SPAM - Goto - Import Logs - Queue and found the following:
    ABAP Dictinary Activaiton endes with return code 8.
    Table SI_WD_FIRST_MAIN_SCREEN could not be activated
    Could you please tell me how to proceed?
    (e.g. activate the table by my own)
    I would like to implement SAP note 1113868, but it is not possible due to the error that OCS/SPAM locked.
    Are there any possibilities to solve this problem?
    (e.g. to change manually necessary objects)
    Thank you very much!
    regards
    Holger

    Hi Holger / Thom,
    You seem to be having a tramendous amount of problems since several weeks already with your upgrade...
    Have you considered contacting SAP for some help with all these problems?
    Of course, if these problems are "self-inflicted" then SAP might want to bill you for it, but I have not seen any mention of custom modifications or the likes in your many posts on the topic here at SDN, so possibly your SAP account manager and SAP Support should step in to solve the overall problem.
    If I am missing the point here, then sorry for that - but the recurring flavour of the questions seems strange.
    Can you clarify?
    Cheers,
    Julius
    Edited by: Julius Bussche on Dec 7, 2008 9:29 PM

Maybe you are looking for

  • Office 2013 "Help" -- What Executables Does it Call?

    The help function in Office 2013 applications running under 64-bit Windows 7 Professional SP1 is blocked by my Software Restriction Policy (e.g.,.http://www.mechbgon.com/srp/).  Neither clicking "?" in the upper right of the application window nor pr

  • How to transfer a number from a family Plan to a personal account?

    I need to transfer a # from a family Plan to another person outside the plan

  • WEBUTIL_FILE_TRANSFER.URL_To_Client unable to transfer desired file from DB

    Hi all, I need to transfer files from DB server to web client using WEBUTIL_FILE_TRANSFER.URL_To_Client, the problem is whenever i try to transfer i get base.htm file contents into the requested file. i.e. i do not get the desired file transfered int

  • Version 5.1 and iPhoto problems?

    I have an AT&T iPhone 4 running 5.1 and now my photos will not sync with iPhoto which is 9.2.2. I have checked cables and connections. The phone itself is syncing fine with iTunes 10.6(40). However, the phone is not recognized through Image Capture o

  • IMovie FCP AE   is there a better way?

    Hi, I think there are a few problems with my workflow to say the least and was wondering if anyone could offer some suggestions on how to get the best quality video out at the other end. I start by using iMovie to turn my raw 1920 footage into someth