Error in Universe Parsing Failed and so Information Space in Explorer?

Hi,
I'm creating a Universe on top of SAP BEx Query using OLAP Universe in UDT tool but when i tried to Parse the Universe the below errors are coming.

Hi all,
The problem has been solved, I added all the license keys to the CMC server and then the problem got solved.
Thanks,
Kiran

Similar Messages

My vreative cloud downloaded and so did PS but now its saying there is an error...update failed and im retrying it but its not working what do i do?

my creative cloud downloaded and so did PS but now its saying there is an error...update failed and im retrying it but its not working what do i do?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Storeand turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
tt2

Create Information Space (BO Explorer) on SAP BW Query

Hi experts,
I try the following, but it doesn't work.
I build a universe on a SAP BW query. Then I export the universe to access with BO Explorer and create an information space. The information space exist of two characters and one keyfigure. When I start my query in BEx Analyzer I get some hundreds of results. But when I explore the information space in BO Explorer I get only one result, like I get one result in transaction list cube without selecting a character. It aggregates the whole datasets into one.
But what is the error, because I'd like to explorer through the data in information space? Is there a special way to design the universe or to set up the information space?
Thanks in advance.
Greets Nico

Hey,
here it is. I proudly presents the solution.
Just use the right object in the OLAP universe. The universe designer creates the object L00 and L01 for each character. The right way is to use the L01 object. Here you have the possibility to the select the values. Otherwise, if you use L00 object you only have the aggregation of the character.
I read it once in the manuals but didn't checked it.
Buy Nico

/dev/zero:mmap failed and out of space problems

Hi All
I have a sun-Fire v240 with Solaris 10. Created 4 zones and trying to running our application software in each of the zones. After running the applications for some time, in some of the zones one application process gets /dev/zero:mmap failed message and aborts. Also when the Java VM tries to start it is not able to allocate object heap space and aborts and causes the zone to reboot. I tried by increasing maxusers but to avail.
Please help.
Regards

Hi,
If Outlook is running in the cached mode, please run it in the online mode to check the results again.
If the problem persists, try to refresh the free/busy information by running Outlook with the /CleanFreeBusy command-line switch on the computer that is experiencing problems publishing free/busy
information. To do this:
================
1.
Click Start > Run.
2.
In the Open box, type the command and press Enter:
outlook.exe /cleanfreebusy
At the same time, you can also post this issue in the Exchange server forum to see if they have better idea:
http://social.technet.microsoft.com/Forums/en-US/exchangesvrgeneral/threads
Best Regards,
Sally Tang

BI services error "Data parsing failed, premature end of file".

Hi all,
we are facing issue while using BI services whenever we are trying to drill data its showing the error as "Data parsing failed contact your system administrator,premature end of file".
please share with me if anyone has faced the same error anytime.
thank in advance for your valuable suggestions.
Thanks,
karan.

Hi,
Please check whether the RFC imported by you contain the exact elements of XML. I feel the RFC generated does not contain proper XML schema.
Regards
Krish

Index Creation Error, while creating Information space

Hi,
I'm trying to create an Information Space in explorer based
off of a Universe created on a Bex Query from SAP BW.
This
Universe is created in Universe design tool based on BW 7.4, gives below error, while creating report in Web Intelligence based on Universe.
Database error: Failed to execute MDX Query.
Reason occured when starting the parser timeout during
allocate/CPC-CALL.
2) In Explorer everything seems to be working fine with the
Information Space creation up until the point where I need to index it. When I click 'Index' it takes about 5-10
seconds and then fails with the following error
Latest indexing failed
Start Date: 2015/02/11 08:51
End Date: 2015/02/11 08:53
Server, BOHDSIA.ExplorerIndexingServer, generated the
following messages:
Index Creation Failed (
The execution of the specified analysis query
failed.-Database error: A database error has occured. (IES 10901)
Database error: A database error has occured. (IES 10901))
The Bex Query executes successfully in BEx Analyzer and webi
report created with BEX as datasource

Please see reply at:
http://technet.oracle.com:89/ubb/Forum36/HTML/000661.html

Using UTL_I18N.ESCAPE_REFERENCE still results in XML Parsing Failed'

Trying to create an RSS feed from a list of newly delivered library materials, and it's all working except for one record with a Turkish character in it. I am trying to convert that value into AL32UTF8 (the database is UTF8) in the XMLElement call, but I still receive errors that the parsing failed at line 24, which is just before the beginning of the loop to aggregate the xmlelements.
Any pointers to what I am doing wrong, conceptually and technically, would be gratefully received, thanks very much for any assistance and/or pointers here.
Peter
create or replace
PROCEDURE "RSSLOOPWORKS2" ( fund_in IN VARCHAR2)
is
-- customizable parameters
l_title varchar2(255) := ' New Titles Since ' || to_char(sysdate - 90, 'MM/DD/YYYY');
l_link varchar2(255) := 'replace this' || fund_in || '.rss';
l_description varchar2(255) := 'This is a feed of changes to items ' || fund_in;
l_language varchar2(255) := 'en-us';
-- end customizable parameters
l_version varchar2(10) := '2.0';
l_clob clob;
l_idx pls_integer := 1;
l_len pls_integer := 255;
l_defrows pls_integer := 100;
l_maxrows pls_integer := 100;
l_desclen pls_integer := 250;
-- for output to file
begin
-- fund := fund_in;
for i in (
select xmlelement( "rss",
-- Begin XML Header Block
xmlattributes( l_version as "version"),
xmlelement( "channel",
xmlforest( l_title as "title",
l_link as "link",
l_description as "description",
l_language as "language"),
-- End XML Header Block
-- Begin List of Individual Articles or Items
xmlagg(
xmlelement( "item",
CASE
WHEN x.title IS NOT NULL THEN xmlelement("title", x.title)
ELSE xmlelement("title", substr(UTL_I18N.ESCAPE_REFERENCE(x.description,'AL32UTF8'),1,255))
END,
xmlelement("link", x.link),
xmlelement("description", UTL_I18N.ESCAPE_REFERENCE(x.description,'AL32UTF8') || ' -- Call number: ' || x.callnum),
xmlelement("callnum", x.callnum),
xmlelement("pubDate", to_char(x.updated_on,'Dy, DD Mon RRRR hh24:mi:ss') || ' EST'),
xmlelement("guid", XMLATTRIBUTES('false' as "isPermaLink"),x.id||to_char(x.updated_on,'JHH24MISS'))
-- End List of Individual Articles or Items
) as result
from ( -- Actual Database Query that populates the list of Items
select id,title,link,description,updated_on, callnum
from drx_rss_feeds
where (fund like fund_in||'%')
and rownum < (l_maxrows+1)) x)
loop
l_clob := xmltype.extract(i.result,'/').getclobval;
exit;
end loop; --i
--- OUTPUT RESULTS
-- for i in 1..ceil(dbms_lob.getlength(l_clob)/l_len) loop
dbms_xslprocessor.clob2file(l_clob, '/iiidb/http/live/screens/rss/', fund_in || '.rss');
-- l_idx := l_idx + l_len;
-- end loop; --i
end rssloopworks2;

Is your database characater set AL32UTF8 or UTF8. If it's not AL32UTF8 please convert and try again... Database character set UTF8 is not a complete implementation of XML's UTF-8 encoding.

Parse failed: Exception DBD, The supplied XML is not valid[Measures].[SAP_OBJECT_NAME] State:N/A error for hidden KFs when migrated to HANA

Hi All
Please help me with the following query. We are migrating SAP BW 7.4 on Oracle to HANA. We have few WEBI report's universes built on BEx queries. In one of those reports there are some hidden RKFs, these works perfectly fine in reports based on oracle. Now we migrated to HANA in development system and when i refresh the universe structure they started giving errors like "Parse failed: Exception DBD, The supplied XML is not valid[Measures].[SAP_OBJECT_NAME] State:N/A". The object giving this error is in hidden state. I tried to unhide it and run the report then it runs fine but that not the client want as there might be so many hidden KFs in other reports also. BO version is 4.1 SP 2. We are on SAPKW74006 support package on BW side. Is there any notes to correct this error. Please pass me the relevant links. Highly appreciate your help.
Thanks
Dwaraka

DCA-40012: The Web Service call failed. A connection to the target Web Service could not be created.
First of all test the web service you have created in model project. Right click the web service name and select "Test WebService". If you see any issue(s) while testing fix it first before you run the jspx page.
Check the port number in the URL and connections.xml, it have to be same.

How to Resolve Parse Errors in Universe

Dear All,
Integration of Business objects with SAP BI Solutions have opened up a large visibility for the customers in viewing their organizational data in several forms. Thanks to the Integration kit for SAP Solutions.
Coming to my problem.
We have created a universe on top of BI Query which was having all the charecteristics and Keyfigures of the multiprovider. Though it is not the suggested best practice, our customer wants to go with this approach in order to keep the minimal universe count.
In some of the situvations the changes made to the query is causing Parsing errors in the universe.
Let me explain with an example.
We have created a universe for Service Level Orders on top of a BI Query which has around 100 charecteristics and 100keyfigures. Later I have added 2 charecteristics and changed the description of one field. Sales order item(0ORD_ITEMS) to No.of Order items. After refreshing the universe I got the mentioned changes in the universe. But when I checked the integrity of that universe it has thrown 250 errors. saying Parse Failed.
The same case I have faced when removing an object from query.
Can anyone guide me on how to correct these parse errors. I mean How to trace the universe. A step by step process will be highly appreciated.
We are using Windows, BOXI 3.1
Below is the Error message I am getting while doing the Parsing.
http://www.mediafire.com/?mktd0xx1ktz
Thanks and Best Regards
Jagadeesh Ambati
Edited by: Jagadeesh Ambati on Jan 4, 2010 3:04 PM

Dear Ingo,
Thanks for your quick response. I tried creating a new universe, for the first time The parse was successful for all the fields, After adding a field to the query, the Parse has failed for many fields with the same error.
You said the error is indicating issues on BW side, Can you please let me know, what are all the issues cause this error in BW side.
More over the interesting part is, if I change the properties of the parse failed characteristic to "Delegate search", Parsing is showing as OK.
This is the problem we have been facing for most of the universes; Due to our requirements we need to change the query frequently and the same should be reflected in universe. Due to this error, we are unable to go forward.
If we create a new universe with the same name(Overwriting on the existing one), The reports which are existing on the universe are not working.
Please suggest me how can we trace this problem
Thanks and Best Regards
Jagadeesh Ambati

There was a problem updating InDesign CC For more information see the specific error below. Update Failed Download error. Press Retry to try again or contact customer support.(49)

Posted the entire text from the error window, when trying to update, using the normal NON-TECHIE way to update any and all Adobe CC products, via the Creative Cloud updater installed when Adobe Creative Cloud subscription was purchased when first offered.
The following occurs, ad nauseam:
There was a problem updating InDesign CC
For more information see the specific error below.
Update Failed
Download error. Press Retry to try again or contact customer support.(49)
Here's the crux of my frustration:
(1) Customer Service is NOT contact-able, to receive LIVE help.
(2) There is NO way for me to mitigate this "Download error", being a student learning InDesign, and NOT in any way capable of tweaking folders/files here and there.
Therefore, the real question:
Given that a significant number of subscribers are having the above referenced issue with attempting to download the current update for InDesign, WHAT ARE WE SUPPOSED TO DO, in order to get our contractually paid-for updates to our legally and contractually paid-for Adobe software, specifically in my case, InDesgin's current update?
Please, NO TECHNICAL mumbo-jumbo which most likely will cause the overwhelming majority of users, like me, to seriously corrupt their computer files, but rather an honest, straightforward "what to do" from real CS/Engineers working for Adobe, as to how to FIX this issue, period.
===========================================================
UPDATE:
Here is a way in which I think I was able to "update" my InDesign CC application:
(1) Sign-In to your Adobe Account
https://www.adobe.com/
(2) Click on the MENU icon
(3) Click on the product InDesign icon
Your browser should display the page for Adobe InDesign CC
https://www.adobe.com/products/indesign.html?promoid=KLXLU
(4) Click on the Download icon,
Your browser should now display the page to download InDesign,
https://creative.adobe.com/products/download/indesign
(5) a Pop-Up window should open, and display:
Launch Application
This link needs to be opened with an application.
with the first option to select being the CreativeCloud(URIHandler)
(5) Select this application and click OK.
What happened when I followed steps (1) thorugh (5) is that:
(a) InDesign CC(2014) was installed,
(b) InDesign CC, updated, and then
(c) InDesign CC(2014), also updated.
Why this all worked, is a mystery to me.
Looks like a separate, "new" version of InDesign, InDesign CC(2014), was installed, the existing "old" InDesign was updated, and then the newly installed Indesign CC(2014) was further updated.
A BIT MORE, when I launched my InDesign CC app, and checked to see if there were Updates Available, there in fact was an Adobe InDesign CC 64 bit (9.2.2) update.
I clicked on UPDATE and my "old" InDesign CC app was "successfully updated."
FURTHER INFO: I may have neglected to list some important info ... OS: Windows 8.1 Pro with Media Center, 64-bit
Confused, I am able to launch BOTH of these apps, and hopefully I may use one of these versions of the InDesign CC app, to do some InDesign work.
Will keep y'all posted!
Message was edited by: Richard Yapkowitz, about an hour after I first posted this issue.

Jackdan error 49 indicates the installer was unable to access a critical file or directory. You can find additional details at Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html.

Error #1034 Type Coercion fail with registerClassAlias and nested Vectors

I'm attempting to use flash.net.registerClassAlias and ByteArray.writeObject in order to serialize/deserialize data with static type information. It works as you'd expect in the general case but I've run into problems with some nested Vectors that I don't understand. Hopefully someone can point out if I'm just missing something.
For what I understand, we must register both the scalar types and a one-deep specification of a Vector for that scalar type in order to use nested Vectors. For example:
            flash.net.registerClassAlias("TestStructureInner", TestStructureInner);
            flash.net.registerClassAlias("VectorTestInner", Vector.<TestStructureInner> as Class);
This should allow us to read/write objects of type TestStructureInner, Vector.<TestStructureInner>, and Vector.<Vector.<TestStructureInner>> into ByteArrays. And in general it seems to work.
Attached though is a simplified test case that fails, however. The first time we deserialize the data it works. The subsequent time, however, we encounter the following runtime error #1034.
    TypeError: Error #1034: Type Coercion failed: cannot convert __AS3__.vec::Vector.<Object>@304fcb9 to __AS3__.vec.Vector.<__AS3__.vec::Vector.<Test0.as$30::TestStructureInner>>.
    TypeError: Error #1034: Type Coercion failed: cannot convert __AS3__.vec::Vector.<Object>@304fbc9 to __AS3__.vec.Vector.<__AS3__.vec::Vector.<Test0.as$30::TestStructureInner>>.
    TypeError: Error #1034: Type Coercion failed: cannot convert __AS3__.vec::Vector.<Object>@304fdd1 to __AS3__.vec.Vector.<__AS3__.vec::Vector.<Test0.as$30::TestStructureInner>>.
    TypeError: Error #1034: Type Coercion failed: cannot convert __AS3__.vec::Vector.<Object>@304fce1 to __AS3__.vec.Vector.<__AS3__.vec::Vector.<Test0.as$30::TestStructureInner>>.
    TypeError: Error #1034: Type Coercion failed: cannot convert __AS3__.vec::Vector.<Object>@304fbf1 to __AS3__.vec.Vector.<__AS3__.vec::Vector.<Test0.as$30::TestStructureInner>>.
    TypeError: Error #1034: Type Coercion failed: cannot convert __AS3__.vec::Vector.<Object>@304fec1 to __AS3__.vec.Vector.<__AS3__.vec::Vector.<Test0.as$30::TestStructureInner>>.
    TypeError: Error #1034: Type Coercion failed: cannot convert __AS3__.vec::Vector.<Object>@304fad9 to __AS3__.vec.Vector.<__AS3__.vec::Vector.<Test0.as$30::TestStructureInner>>.
    TypeError: Error #1034: Type Coercion failed: cannot convert __AS3__.vec::Vector.<Object>@304fa61 to __AS3__.vec.Vector.<__AS3__.vec::Vector.<Test0.as$30::TestStructureInner>>.
    TypeError: Error #1034: Type Coercion failed: cannot convert __AS3__.vec::Vector.<Object>@304f9e9 to __AS3__.vec.Vector.<__AS3__.vec::Vector.<Test0.as$30::TestStructureInner>>.
    TypeError: Error #1034: Type Coercion failed: cannot convert __AS3__.vec::Vector.<Object>@304f971 to __AS3__.vec.Vector.<__AS3__.vec::Vector.<Test0.as$30::TestStructureInner>>.
Re-registering the class aliases again via flash.net.registerClassAlias works in this test case but isn't 100% for our actual application (I'm reticent to even mention it but it seems relevant). Is there a step I'm missing here? Any light shed would be appreciated.
// mxmlc -debug Test0.as
package
    import Base64; // http://code.google.com/p/jpauclair-blog/source/browse/trunk/Experiment/Base64/src/Base64.a s
    import flash.net.registerClassAlias;
    import flash.events.Event;
    import flash.utils.ByteArray;
    import flash.display.Sprite;
    import flash.display.Stage;
    import flash.system.System;
    public class Test0 extends Sprite
        static private const OPERATION_SERIALIZE:uint = 0;
        static private const OPERATION_DESERIALIZE_AND_FAIL:uint = 1;
        static private const OPERATION_DESERIALIZE_AND_SUCCEED:uint = 2;
        static private var staticStage:Stage;
        private var bar:Vector.<TestStructure>;
* common functions
        static private function registerClassAliases():void
            flash.net.registerClassAlias("TestStructureInner", TestStructureInner);
            flash.net.registerClassAlias("VectorTestInner", Vector.<TestStructureInner> as Class);
            flash.net.registerClassAlias("TestStructure", TestStructure);
        static public function staticDeserialize():Object
            var byteArray:ByteArray = Base64.decode("EBUAG1Rlc3RTdHJ1Y3R1cmUKEwAHZm9vEAEAH1ZlY3RvclRlc3RJbm5lcgoBEAEABAoBEAEABA oBEAEABAoBEAEABAoBEAEABAoBEAEABAoBEAEABAoBEAEABAoBEAEABA==");
            byteArray.position = 0;
            return byteArray.readObject();
        public function Test0():void
            registerClassAliases();
            // Switching operation between the constants demonstrates failure/success in a couple of different ways.
            // SERIALIZE is just used to prepare the base64 string for subsequent tests.
            var operation:int = OPERATION_SERIALIZE_AND_FAIL;
            if (operation == OPERATION_SERIALIZE)
                trace("Serializing");
                // outputs base64 string for subsequent tests
                serialize();
            else if (operation == OPERATION_DESERIALIZE_AND_FAIL)
                trace("Fail case");
                // perform successful one deserialization, then one failing one.
                deserializeOnceThenFail();
            else if (operation == OPERATION_DESERIALIZE_AND_SUCCEED)
                trace("Success via re-registration");
                // perform successful one deserialization, then another successful one.
                deserializeOnceThenSucceed();
* serialize
        // outputs base64 string we use for subsequent tests.
        private function serialize():void
            var baz:Vector.<TestStructure> = new Vector.<TestStructure>;
            for (var i:int=0; i<10; ++i)
                baz.push(new TestStructure);
            var byteArray:ByteArray = new ByteArray;
            byteArray.writeObject(baz);
            trace(Base64.encode(byteArray));
* deserializeOnceThenFail
        // perform successful one deserialization, then one failing one.
        public function deserializeOnceThenFail():void
            // save stage
            staticStage = stage;
            // the first deserialize will proceed without error.
            staticDeserialize();
            trace("Successful deserialize");
            // add an event listener in order to invoke error on subsequent frame
            stage.addEventListener(Event.ENTER_FRAME, doEnterFrameOnceThenFail);
        // remove event listener and invoke again.
        static private function doEnterFrameOnceThenFail(e:Event):void
            staticStage.removeEventListener(Event.ENTER_FRAME, doEnterFrameOnceThenFail);
            staticDeserialize();
            trace("unsuccessful deserialize2");
* deserializeOnceThenSucceed
* Here, we re-call flash.net.registerClassAlias on all our class types when running.
        // perform successful one deserialization, then one failing one.
        public function deserializeOnceThenSucceed():void
            // save stage
            staticStage = stage;
            // the first deserialize will proceed without error.
            staticDeserialize();
            trace("Successful deserialize");
            // add an event listener in order to invoke error on subsequent frame
            stage.addEventListener(Event.ENTER_FRAME, doEnterFrameOnceThenSucceed);
        // remove event listener and invoke again.
        static private function doEnterFrameOnceThenSucceed(e:Event):void
            staticStage.removeEventListener(Event.ENTER_FRAME, doEnterFrameOnceThenSucceed);
            registerClassAliases();
            staticDeserialize();
            trace("successful deserialize2");
internal class TestStructureInner
          public var value:int;
internal class TestStructure
          public var foo:Vector.<Vector.<TestStructureInner>> = new Vector.<Vector.<TestStructureInner>>;

The error would imply that ImageAssetEvent does not inherit
DisplayEvent. Either modify the inheritance chain or listen for a
basic Event object (flash.events.Event) and cast inside the
function.

Linux - Oracle - Crystal Report Server XI : Error in File Report1: Failed to load database information.

I am using Crystal Reports Server XI on Linux Server with Oracle Server 10g.
I did install Oracle Client on Report Server and config Oracle SID in tnsnames.ora also. It works well with tnsping command. Then, I published a report which was created in Crystal Reports developer on this server.
When I preview the report on Report Server. I got the following error message:
Error in File Report1: Failed to load database information.
Try to fix the problem I ran web Central Management Console -> Objects ->Report1->Process -> Database and set there the following parameters:
Database driver: Oracle
Server: servers_host_name
Database: (tried both ORACLE_SID and tns_name)
User: oracle_user_name
Password: oracle_pw
It still got the same problem.
I will appreciate any help.
Tham.

I was having a similar problem in Crystal Reports Server 2008 v1, and had to install the full client to resolve it, which I didn't like. I poked around some, and was able to get the Instant Client working with a few minor changes. Note that I tried it only with the 32-bit Instant Client even though I was on a 64-bit system because that was what SAP recommended when I talked to them.
The changes I had to do was initialize the Oracle environment variables (the instant client doesn't have a script to do this for you) and to create a soft-link which is included in the full client, but not in the instant client.
To setup the environment variables I created a file called env.sh and put it in /opt/crystal/bobje/setup/oracle/, where /opt/crystal was my install path. This ensured that it got called by the /opt/crystal/bobje/setup/env.sh script which runs as part of the System init scripts to initialize the environment. The following is what I put in my file (again for the 32-bit 11g R2 instant client):
     export ORACLE_SID=summitdb
     export ORACLE_HOME='/usr/lib/oracle/11.2/client'
     export ORACLE_BASE='/usr/lib/oracle/'
     export TNS_ADMIN='/usr/lib/oracle/11.2/client/network/admin'
     export PATH="$:/usr/lib/oracle/11.2/client/bin"
     export LD_LIBRARY_PATH="$$/usr/lib/oracle/11.2/client/lib"
After that, I created the missing soft link using this command:
     ln -s "$/lib/libclntsh.so.11.1" "$/lib/libclntsh.so.10.1"
Once I had done those two things, and restarted the service using the /etc/init.d script, it worked fine.

Explorer error "Failed to retrieve the Information Spaces list." from HANA

I am getting this dumb error "Failed to retrieve the Information Spaces list. // Request timed out" in Explorer's "Manage Spaces" area every time I click on the analytic view listed under my HANA sources of the Explorer. So, my HANA source is visible, and analytic views are visible in Explorer as well, but I cannot get any Information Space created because of the error, and I could not find the error and its causes in Explorer docs.
I already
- upgraded HANA db to Rev 18 (for some reasons I cannot u[grade this system to SPS3 yet) and BIP and Explorer 4.0 are on the latest Patch 8 of SP2.
- configured connection using IDT defined connection,
- restarted servers in CMS already 100s of times.
There is enough free space on the BO server's drive: 33GB. BO is a single server based on Win2008 R2 SP1 with 40GB RAM.
Any ideas what else I can do to get rid of this issue? It is a test server, so I cannot open customer msg to SAP Support.
Thanks,
-Vitaliy

Try increasing the timeout under
..\SAP BusinessObjects\Tomcat6\webapps\explorer\WEB-INF\classes\ default.settings.properties
from
request.timeout=60
to
request.timeout=600

Message failed in PI: Status code 200 But Error During Response Parsing:

Hi
I have integration scenario for sending PO/PO change/Proact from R/3 to SNC, everything was working till yesterday morning and suddenly all messages are failing in SAP PI with below error. We have not done any changes. The strange thing is this is failing in dev as well as in QA.
HTTP Status Code 200 Received But Error During Response Parsing: No XI Response Received XML element Envelope missing in SOAP message header (SAP XI Extension)
I can see some messages in sxmb_moni (we have not configured this) from sender component "Integration_Server_SID" and it's failed with below message
Proxy calls are not permitted on sender or
receiver side on the IS (client)
Thanks,
Nishant

HTTP Status Code 200 Received But Error During Response Parsing: No XI Response Received
XML element {http://schemas.xmlsoap.org/soap/envelope/}Envelope missing in SOAP message header (SAP XI Extension)
Same problem answered in this discussion....check if it helps:
Re: BW to File scenario
Regards,
Abhishek.

Generate Flexfield and Mapping Information Process errors out

Hi,
The Generate Flexfield and Mapping Information process errors out with the following msg:
**Starts**19-OCT-2009 13:55:02
ORACLE error 6501 in FDPSTP
Cause: FDPSTP failed due to ORA-06501: PL/SQL: program error
ORA-06512: at "APPS.FND_FLEX_DSC_API", line 1626
ORA-06501: PL/SQL: program error
ORA-06512: at "APPS.FND_FLEX_DSC_API", line 925
ORA-01403: no data foun
I have created the element set with all the elements added one at a time into the element set.
Any idea on what could be the issue ?

Pl see if the steps in MOS Doc 453184.1 (ORA-01403 and ORA-06512 at HXC_CREATE_FLEX_MAPPINGS and FND_FLEX_DSC_API on Runnning hxcmprn.sql) can help
HTH
Srini

Error in Universe Parsing Failed and so Information Space in Explorer?

Similar Messages

Maybe you are looking for