Error in UOM coversion...

Dear All,
Unit of measure PAA is not convertible to stockkeeping unit PAC,An error has occurred during conversion of the quantity into the various units of measure ( stockkeeping unit/alternative units).The system cannot post the document.

check the alternate units of measure at meterial master > basic data view > additional data > unit of measure tab
maintain the alternate units of measure

Similar Messages

Error in all coversations from r/3 to bw

Hi Sam,
When I am doing extraction I am getting problm in Coversation errors in BW..
i.e. In R/3 everything is done successfully, But in BW after replicating Data Source and after instalation of objects in Busines Contect it trowing errors in Conversions
Its displaying all types of Coversions i.e.. Currency, Units, Quantity etc...
2LIS_11_VDHDR
CUBE 0SD_C03 and 0SD_C05
No Conversation is happing in any data source
Give some advice..
Mohhan

Hi Sam,
I did LO's cockpit, datasource is 2LIS_11_VASCL..
in bw WHILE MONITORING IT IS THROUGHING BELOW ERROR.. I GOT SAME TYPE OF PRBLMS FOR REST OF DATASOURCES..
PLS SUGGEST WHAT WOULD BE THE PRBLM..
Like installation or Selecting any default Feilds..
The error is
Settings for material number conversion not found
CUBE :: 0CDS_DS04

Error during UOM change

Hello experts,
We are getting error while changing the UOM for one material from M to PC.
Error is 'Stock is existing in plant' but actually there is no stock available in plant.We already cleared the stock.What could be the other reasons??
Please help me to solve this.
Thanks in advance.
Shyam

Refer this OSS :: 30656 - Change base unit of measure/batch mngt requirement
Please check whether stocks still exist for the previous period by displaying, for example, the plant stock view or storage location stock view of the material. You do this by selecting "Extras -> Previous period -> Prev. pd SLoc. stock or Prev. pd plant stock".
If previous period stocks exist, you can make a withdrawal posting as follows:
1. Post the same amount to current period stock (for example, using movement type 561) so that previous period stock and current period stock are identical.
2. Make a withdrawal posting in the previous period for the stock together with posting date (for example, using movement type 562).
You can now try again to change the base unit of measure
Regards
Biswajit

Error on UOM manager

Hello.
When I try to start the UOM manager I get following errormessage:
"Please install xCat COM, version 4.054 or higher, that matches you xCat Server installation"
Everything else in MDM is functioning. Wher do I find this xCat com.
Regrads John-Kjell

Hi Michael
Thank you, very helpfull.
I still have problems to connect to the database server. I have allowed Windows Authentication on my MDM server .
Regards John-Kjell

Error in UOMs when using Bookmarks

Hi,
I have a Forecast Consumption report which has 4 tabs: Data Analysis (which gives UOMs in KGs) , U.S. UOM View (which converts UOMs to LBs), Chart Display and Report Information.
An interesting problem faced by an User. When the User runs the Forecast Consumption report from the web, he is able to see UOMs in KGs in Data Analysis tab and in LBs under U.S. UOM View, which is expected.
But when he tries to execute the report using bookmarks, he is able to view only KGs in both the tabs in Data Analysis tab and under U.S. UOM View.
Have checked all the settings and everything seems fine but cannot figure out why U.S. UOM is showing in KGs when the report is run via bookmark. Has anybody encountered this issue. Any help would be appreciated.

Do you know how to use the 'result' parameter of the query
tag to get
the actual, complete SQL statement sent to the database.
Looking at
this may tell you what your issue is.

Error while importing a soap webservice

I was consuming a webservice with flex 3 and it works perfectly.
But when i tried to consume it using flash builder 4 when i try to connect to show me this error:
Unable to save the data model
Reason:
An error occurred while attemping to resolve the existing model
Detail:
An error occurred while attempting to resolve the existing model.
ERROR : property "accuracy" has already been declared in this scope, at
ERROR : property "value" has already been declared in this scope, at
ERROR : property "uom" has already been declared in this scope, at
ERROR : property "id" has already been declared in this scope, at
ERROR : property "pos" has already been declared in this scope, at
ERROR : property "accuracy" has already been declared in this scope, at
ERROR : property "value" has already been declared in this scope, at
ERROR : property "uom" has already been declared in this scope, at
ERROR : property "accuracy" has already been declared in this scope, at
ERROR : property "value" has already been declared in this scope, at
ERROR : property "uom" has already been declared in this scope, at
What is the problem ?

Hi,
I think the problem lies in the MDM-JAVA-API, as you are receiving a NoClassDefFoundError. I've seen a similar problem where the error was solved by deploying a newer Java API. Maybe the following documentation can be helpful:
http://help.sap.com/saphelp_nwmdm71/helpdata/en/61/a65ad5dfe74524984c8f46f733efeb/content.htm
Regards,
Désiré

Error in p.o creation during waste diposal process in wae02 transaction

Hi All,
I created an entry doument in WAE01 transaction, then i assigned G/L a/c number and cost center and posted entry document succesfully. But i am not able to create purchase order. I am getting error like 1. Entry document does not exist and 2. unit of measurement for waste material converstion from KG to ST is not possible.
note -
1. the unit of measurement is correct in both material master, contract and in waste entry document line item.
2. Assigned proper partner (Disposer) before creating purchase order.
Please throw some tips or suggestion to resole this issue.
Regards,
Ram.

Hi,
It seems that the Waste document not yet created and need to be created.
Error with UOM is due to the customizations because, If you have specified a base unit of measure for the document category in Customizing for Waste Management, this is transferred. Last option for the system is to take from Waste material master.
Hope this helps you
Cheers
Srinivas

Need help on Modifying Jsp Code to establish relationships in iStore.

I am currently working on iStore an internet enabled product
from Oracle.
In iStore one can establish relationships between products like
cross sell , complimentary, substitute, conflict etc. However at
the moment only one relationship works i.e: Related. This is
because this is a bug in iStore. Only the relationship Related
is defined in the jsp. We have been asked to modify the jsp
ibeCCtdItemDetail.jsp
Please find pasted below the jsp which only had the arrays for
related i.e: relitems and service i.e service have added the
array complimentary to establish such a relationship and pasted
the relitems code once again and changed relitems to
complimentary. I am stuck up on this since the past 2 weeks i
would appreciate if anybody could help.
<%@include file="jtfincl.jsp" %>

<%--
=================================================================
========
| Copyright (c)2000 Oracle Corporation, Redwood Shores, CA
| All rights reserved.
+================================================================
===========
|
| FILE
| ibeCCtdItemDetail.jsp - Item Detail display
|
| DESCRIPTION
| Displays Item Detail page. Item's description, long
description, large
| image, flexfields, available services, and related items
are displayed.
| The list price and best price (selling price) for each of
the Item's
| available units of measure is displayed. Displays Add to
Cart,
| Express Checkout, Configure buttons (if appropriate).
|
| PARAMETERS (SOURCE)
| party Id IN (RequestCtx) - user's party
id
| account Id IN (RequestCtx) - user's
account id
| currency code IN (RequestCtx) - currency code
| item IN (URL) - Item ID
| section IN (URL) - section ID of
section we are
| coming from
(optional)
| item IN (pageContext) - Item ID
| section IN (pageContext) - Section ID
| qty IN (pageContext) - Quantity
entered by user
| uom IN (pageContext) - UOM selected
by user
| errorMsg IN (pageContext) - error message
from buy
| routing page
| * pageContext attributes for "item" and "section" are used
when the URL
| does not contain valid values for "item" and "section"
(such as when an
| error occurred in the buy routing page and the request is
forwarded
| back to this page)
|
| oneclick_obj OUT (pageContext) - OneClick
object containing
| user's
Express Checkout
| preferences
| postingID OUT (pageContext) - Integer
posting Id, for
| iMarketing
integration
| itemIDs OUT (pageContext) - int[] itemIDs
on the page
| (for use by
postings)
| numRequested OUT (pageContext) - Integer
number of postings,
| for
iMarketing integration
| random OUT (pageContext) - Boolean
whether to randomize
| posting
retrieved, for
| iMarketing
integration
| type OUT (HTML form) - "single" (1
item)
| item OUT (HTML form) - Item ID
| refpage OUT (HTML form) -
"ibeCCtdItemDetail.jsp" plus any
| parameters
needed to return
| to this page
in case of error.
| uom OUT (HTML form) - UOM code
selected by user
| qty OUT (HTML form) - quantity
entered by user
| Add to Cart.x OUT (HTML form) - user clicks
Add to Cart
| 1-Click.x OUT (HTML form) - user clicks
Express Checkout
| Configure.x OUT (HTML form) - user clicks
Configure
|
| OBJECTS REFERENCED
| oracle.apps.ibe.catalog.Item
| oracle.apps.ibe.order.OneClick
|
| APIs REFERENCED
| Item.getItemID() - get Item ID
| Item.getDescription() - get item description
| Item.getLongDescription() - get item long description
| Item.isConfigurable() - whether item has
configuration UI set up
| Item.getFlexfields() - get Item flexfield
prompts and values
| Item.getRelatedItems() - get related items and
service items
| Item.getMediaFileName() - get media based on
display context
| OneClick.loadSettingFrDB() - load Express Checkout
settings for
| current user
|
| JSPs REFERENCED
| ibeCCtpPostingI.jsp - set iMarketing
parameters (include)
| ibeCCtpSetItem.jsp - retreive and set item
information (include)
| ibeCCtpItmDspRte.jsp - Item display routing
page (link)
| ibeCCtpBuyRoute.jsp - Buy routing
page (form POST)
| ibeCCtdSctPath.jsp - Path Traversed
Display (include)
| ibeCXpdShowTag.jsp - Express Checkout Tag
Area (include)
| ibapstng.jsp - iMarketing integration
page (include)
|
| ADDITIONAL NOTES
| iMarketing posting ID can be changed by editing file
ibeCCtpPostingI.jsp
|
| HISTORY
| 08/01/2000 auyu Created.
| 04/09/2001 auyu Added compile-time include for retrieving
item
| information
|
+================================================================
=======--%>
<%@page import="oracle.apps.ibe.order.*" %>
<%@page import="oracle.apps.ibe.catalog.*" %>
<%@page import="oracle.apps.ibe.store.*" %>
<%@page import="oracle.apps.jtf.displaymanager.*" %>
<%@page import="oracle.apps.jtf.base.Logger" %>
<%@page import="oracle.apps.jtf.minisites.*" %>
<%@include file="ibeCZzpHeader.jsp" %>
<%@page import="oracle.jdbc.driver.*" %>
<%@page import="java.sql.*" %>
<%-- declaration --%>
<%!
/* Retrieve parent section ids for a given item.
* int itemId - Item whose parent section ids will be retrieved
int getParentSectionId(int itemId)
int parentSectionId = -1;
Connection conn = null;
OraclePreparedStatement stmt = null;
ResultSet rs = null;
try {
BigDecimal minisiteId = RequestCtx.getMinisiteId();
conn = TransactionScope.getConnection();
StringBuffer sql = new StringBuffer(400);
sql.append("select jdsi.section_id ");
sql.append("from jtf_dsp_section_items jdsi, ");
sql.append("jtf_dsp_msite_sct_items jdmsi ");
sql.append("where jdsi.inventory_item_id = ? ");
sql.append("and jdsi.section_item_id =
jdmsi.section_item_id ");
sql.append("and jdmsi.mini_site_id = ? ");
sql.append("and nvl(jdsi.start_date_active, sysdate) <=
sysdate ");
sql.append("and nvl(jdsi.end_date_active, sysdate) >=
sysdate ");
sql.append("and nvl(jdmsi.start_date_active, sysdate) <=
sysdate ");
sql.append("and nvl(jdmsi.end_date_active, sysdate) >=
sysdate");
stmt = (OraclePreparedStatement)conn.prepareStatement
(sql.toString());
stmt.setInt(1, itemId);
stmt.setInt(2, minisiteId.intValue());
stmt.defineColumnType(1, Types.INTEGER);
rs = stmt.executeQuery();
if (rs.next())
parentSectionId = rs.getInt(1);
} catch (Exception e1) {
parentSectionId = -1;
IBEUtil.log("ibeCCtdItemDetail.jsp",
"Caught exception while retrieving parent
section id");
IBEUtil.log("ibeCCtdItemDetail.jsp", e1.getMessage());
} finally
try { if (rs != null) rs.close(); } catch (Exception e2) {}
try { if (stmt != null) stmt.close(); } catch (Exception
e2) {}
try {
if (conn != null) TransactionScope.releaseConnection
(conn);
} catch (Exception e2) {}
return parentSectionId;
%>
<%-- end declaration --%>
<%@include file="ibeCCtpSetItem.jsp"%>
<%
The compile-time inclusion of ibeCCtpSetItem.jsp will declare
and set
the following variables:
boolean bItemLoaded - whether section was
loaded
Item lItem - Item
boolean bItemCanBeOrdered - whether item can be
ordered
String[] uomCodes - Item's UOM Codes
Vector itemSellPriceDisplayVec - vector containing
item's selling
prices in formatted
strings
Vector itemListPriceDisplayVec - vector containing
item's list
prices in formatted
strings
int nPriceDefined - number of prices
defined for the item
Perform the following actions:
Set "itemIds" in the PageContext.REQUEST_SCOPE
Set "item" in PageContext.REQUEST_SCOPE
Set "section" in PageContext.REQUEST_SCOPE
MessageManagerInter lMsgMgr =
Architecture.getMessageManagerInstance();
pageContext.setAttribute("_pageTitle",
lMsgMgr.getMessage
("IBE_PRMT_CT_PRODUCT_DETAILS"),
PageContext.REQUEST_SCOPE);
%>
<%@ include file="ibeCCtpPostingI.jsp" %>
<%@ include file="ibeCZzdTop.jsp" %>
<%@ include file="ibeCZzdMenu.jsp" %>
<%
if (bItemLoaded)
OneClick lOneClickObj;
String xprTagArea = "", confirmXpr = "";
String lBuyRoutePage;
String lSectionPathPage = "";
int sectid = 0;
Item[] services = new Item[0];
Item[] relItems = new Item[0];
Item[] complimentary = new Item[0];
ItemFlexfield[] itemFlexfields = new ItemFlexfield[0];
String lItemImage = "", lItemAddtlInfoFile = "";
StringBuffer lRef = new StringBuffer("ibeCCtdItemDetail.jsp?
item=");
String qty = "", userSelUOM = "";
String errorMsg = "";
//--------------- load express checkout preferences ---------
if (IBEUtil.useFeature("IBE_USE_ONE_CLICK"))
xprTagArea = DisplayManager.getTemplate
("STORE_XPR_TAG_AREA").getFileName();
if (xprTagArea == null)
xprTagArea = "";
confirmXpr = lMsgMgr.getMessage("IBE_PRMT_EXPR_CONFIRM");
if (RequestCtx.userIsLoggedIn()) {
//initialize OneClick if user is logged in
BigDecimal partyId = RequestCtx.getPartyId();
BigDecimal accountId = RequestCtx.getAccountId();
lOneClickObj = new OneClick();
lOneClickObj.loadSettingsFrDB(partyId, accountId);
} // end user express checkout
//------------ set "section", lSectionPathPage --------------
String lSectionId = IBEUtil.nonNull(request.getParameter
("section"));
if (lSectionId.equals(""))
lSectionId =
IBEUtil.nonNull((String)pageContext.getAttribute
("section", PageContext.REQUEST_SCOPE));
if(IBEUtil.useFeature("IBE_USE_SECTION_PATH"))
lSectionPathPage = DisplayManager.getTemplate
("STORE_CTLG_SCT_PATH").getFileName();
try {
sectid = Integer.parseInt(lSectionId);
pageContext.setAttribute("section", String.valueOf
(sectid), PageContext.REQUEST_SCOPE);
} catch (NumberFormatException e) { }
if(lSectionPathPage == null)
lSectionPathPage = "";
lBuyRoutePage = DisplayManager.getTemplate
("STORE_CTLG_BUY_PROCESS_ROUTE").getFileName();
/* if error and forwarded back to this page, get values
selected by user */
qty = IBEUtil.nonNull((String)pageContext.getAttribute
("qty", PageContext.REQUEST_SCOPE));
if (qty.equals(""))
qty = "1";
userSelUOM = IBEUtil.nonNull((String)pageContext.getAttribute
("uom", PageContext.REQUEST_SCOPE));
errorMsg = IBEUtil.nonNull((String) pageContext.getAttribute
("errorMsg", PageContext.REQUEST_SCOPE));
//set ref for returning to this page in case of error
lRef.append(lItem.getItemID());
if (sectid > 0)
lRef.append("&section=");
lRef.append(sectid);
/* Get Bin Open and Bin Close Images */
String binOpenImg = "", binCloseImg = "";
try {
Media binOpenMedia = DisplayManager.getMedia
("STORE_BIN_OPEN_IMAGE", true);
if (binOpenMedia != null)
binOpenImg = binOpenMedia.getFileName();
} catch (MediaNotFoundException mnfe) {}
if (binOpenImg == null)
binOpenImg = "";
try {
Media binCloseMedia = DisplayManager.getMedia
("STORE_BIN_CLOSE_IMAGE", true);
if (binCloseMedia != null)
binCloseImg = binCloseMedia.getFileName();
} catch (MediaNotFoundException mnfe) {}
if (binCloseImg == null)
binCloseImg = "";
/* Get images, additional info, flexfields, related items,
service items */
lItemImage = lItem.getMediaFileName
("STORE_PRODUCT_LARGE_IMAGE");
lItemAddtlInfoFile = lItem.getMediaFileName
("STORE_PRODUCT_ADDTL_INFO");
// check for defaulting
String defaultFromSection = "Y";
if ("Y".equals(defaultFromSection))
if (lItemImage == null || lItemAddtlInfoFile == null)
try {
int parentSectionId = getParentSectionId
(lItem.getItemID());
Section parentSection = Section.load(parentSectionId);
if (lItemImage == null)
lItemImage = parentSection.getMediaFileName
("STORE_SECTION_SMALL_IMAGE");
if (lItemAddtlInfoFile == null)
lItemAddtlInfoFile = parentSection.getMediaFileName
("STORE_SECTION_ADDTL_INFO");
} catch (Exception e) {}
itemFlexfields = lItem.getFlexfields();
try {
services = lItem.getRelatedItems("SERVICE");
} catch (ItemNotFoundException e) {}
try {
relItems = lItem.getRelatedItems("RELATED");
} catch (ItemNotFoundException e) {}
try {
complimentary = lItem.getRelatedItems("COMPLIMENTARY");
} catch (ItemNotFoundException e) {}
%>

<table border="0" width="100%">
<%
if (IBEUtil.showPosting()) {
%>

<tr><td colspan="4" align="center">
<% try {
%>
<jsp:include page="ibapstng.jsp" flush="true" />
<% } catch (Throwable e) {
IBEUtil.log("ibeCCtdItemDetail.jsp", "iMarketing error",
Logger.ERROR);
%>
</td></tr>
<% } //end iMarketing installed
%>
<tr><td> </td>
<%
if(!lSectionPathPage.equals(""))
%>
<td colspan="4" class="smallLink">
<jsp:include page="<%=lSectionPathPage%>" flush="true" />
</td>
<% }
%>
</tr>
<tr><td valign="top"> </td>

<td valign="top" width="70%">
<table border="0" cellpadding="0" cellspacing="0">
<tr><td colspan="3">
<span class="pageTitle"><%=lItem.getDescription()%
</span></td></tr>
<tr>
<% if (lItemImage != null) {
%>
<td valign="TOP"><img src="<%=lItemImage%>"></td>
<td valign="TOP" colspan="2"><%
=lItem.getLongDescription()%></td>
<% } else {
%>
<td valign="TOP" colspan="3"><%
=lItem.getLongDescription()%></td>
<% }
%>
</tr>
<% if (lItemAddtlInfoFile != null) {
%>
<tr><td colspan="3"><br>
<jsp:include page="<%=lItemAddtlInfoFile%>"
flush="true" />
</td></tr>
<% }
%>
<tr><td colspan="3"><br></td></tr>
<%
for (int i=0; i < itemFlexfields.length; i++)
String prompt = itemFlexfields.getPrompt();
String value = itemFlexfields[i].getValue();
if (value != null && !value.equals(""))
%>
<tr>
<td align="LEFT" width="20%">
<span class="sectionHeader2"><%=prompt%
   </span></td>
<td align="LEFT" colspan="2" width="80%"><%=value%
</td></tr>
<% }
if (services.length > 0)
%>
<tr><td colspan="3"><br></td></tr>
<tr><td align="RIGHT" class="sectionHeader1" width="20%">
<%=lMsgMgr.getMessage("IBE_PRMT_CT_WARRANTIES")%>
</td>
<td colspan="2" align="left" class="sectionHeaderBlack"
width="80%"><hr>
</td></tr>
<%
for(int i=0; i < services.length; i++)
%>
<tr>
<td valign="TOP" class="sectionHeaderBlack"
width="20%"> </td>
<td align="left" colspan="2" valign="TOP" width="80%">
<span class="sectionHeaderBlack">
<A HREF="<%= DisplayManager.getURL
(STORE_CTLG_ITM_ROUTE", "item=" + services[i.getItemID()) %>">
<%=services.getDescription()%></A>
</span>
<%=services[i].getLongDescription()%>
</td>
</tr>
<tr>
<td colspan="3" class="sectionHeaderBlack"> </td>
</tr>
<% } //end loop through services
} // end if services.length > 0
if (relItems.length > 0) {
%>
<tr><td colspan="3"><br></td></tr>
<tr>
<td align="RIGHT" class="sectionHeader1" width="20%">
<%=lMsgMgr.getMessage("IBE_PRMT_CT_REL_PRODUCTS")%>
</td>
<td align="left" colspan="2" class="sectionHeaderBlack"
width="80%"><hr></td>
</tr>
<%
for(int i=0; i < relItems.length; i++)
%>
<tr>
<td valign="TOP" class="sectionHeaderBlack"
width="20%"> </td>
<td colspan="2" align="left" valign="TOP"
width="80%">
<span class="sectionHeaderBlack">
<A HREF="<%= DisplayManager.getURL
("STORE_CTLG_ITM_ROUTE", "item=" + relItems[i].getItemID()) %>">
<%=relItems[i].getDescription()%></A>
</span>
<%=relItems[i].getLongDescription()%>
</td>
</tr>
<tr>
<td colspan="3" align="RIGHT"
class="sectionHeaderBlack"> </td>
</tr>
<% } // end loop through related items
} // end if relItems.length > 0
%>
</table>
</td>
<%if (complimentary.length > 0) {
%>
<tr><td colspan="3"><br></td></tr>
<tr>
<td align="RIGHT" class="sectionHeader1" width="20%">
<%=lMsgMgr.getMessage("IBE_PRMT_CT_REL_PRODUCTS")%>
</td>
<td align="left" colspan="2" class="sectionHeaderBlack"
width="80%"><hr></td>
</tr>
<%
for(int i=0; i < complimentary.length; i++)
%>
<tr>
<td valign="TOP" class="sectionHeaderBlack"
width="20%"> </td>
<td colspan="2" align="left" valign="TOP"
width="80%">
<span class="sectionHeaderBlack">
<A HREF="<%= DisplayManager.getURL
("STORE_CTLG_ITM_ROUTE", "item=" + complimentary[i].getItemID())
%>">
<%=complimentary[i].getDescription()%></A>
</span>
<%=complimentary[i].getLongDescription()%>
</td>
</tr>
<tr>
<td colspan="3" align="RIGHT"
class="sectionHeaderBlack"> </td>
</tr>
<% } // end loop through related items
} // end if complimentary.length > 0
%>
</table>
</td>

<td valign="top" width="20%">
<table border="0" cellpadding="0" cellspacing="0">
<tr><td>
<table border="0" cellpadding="0" cellspacing="0">
<tr>
<% if (! binOpenImg.equals("")) {
%>
<td><img src="<%=binOpenImg%>"></td>
<% }
%>
<td nowrap class="binHeaderCell" width="100%">
<%
if (!lItem.isConfigurable()) {
%>
<%=lMsgMgr.getMessage("IBE_PRMT_CT_2_WAYS_TO_SHOP")%>
<% } else {
%>
<%=lMsgMgr.getMessage("IBE_PRMT_CT_CONFIG_PRODUCT")%>
<% }
%>
</td>
<% if (! binCloseImg.equals("")) {
%>
<td><img src="<%=binCloseImg%>"></td>
<% }
%>
</tr>
</table>
</td></tr>
<tr><td class="binColumnHeaderCell">
<table border="0" cellspacing="1" width="100%">
<tr><td class="binContentCell" align="CENTER">
<% /////////////////////////////// error
messages //////////////////////////////
if (!errorMsg.equals("")) {
%>
<table><tr><td align="center" class="errorMessage">
<%=errorMsg%>
</td></tr></table>
<% }
/////////////////////////////// display
form //////////////////////////////////%>

<script language="JavaScript">
function get_confirmation(form)
if (confirm("<%=confirmXpr%>" ) ) {
form.tmpx.name = '1-Click.x';
form.tmpy.name = '1-Click.y';
form.submit();
return true;
else
return false;
</script>
<form method=POST action="<%=lBuyRoutePage%>">
<input type=hidden name="type" value="single">
<input type=hidden name="item" value="<%=lItem.getItemID()%
"><input type=hidden name="refpage" value="<%=lRef.toString
()%>">
<INPUT TYPE="HIDDEN" NAME="tmpx" VALUE="100">
<INPUT TYPE="HIDDEN" NAME="tmpy" VALUE="100">
<%= RequestCtx.getSessionInfoAsHiddenParam() %>
<%
if ( ! lItem.isConfigurable())
{ // display prices
%>
<table>
<tr><td align ="left" nowrap>
<span class="sectionHeaderBlack">
<%=lMsgMgr.getMessage("IBE_PRMT_CT_LIST_PRICE_COLON")%>
</span>
</td>
<%
for (int i=0; i < uomCodes.length && i <
itemListPriceDisplayVec.size(); i++)
if (uomCodes[i] != null && uomCodes[i].equals
(lItem.getPrimaryUOMCode()))
if (itemListPriceDisplayVec.elementAt(i) != null &&
!itemListPriceDisplayVec.elementAt(i).equals(""))
%>
<td align="right">
<%=itemListPriceDisplayVec.elementAt(i)%
   <%=lItem.getPrimaryUOM()%></td>
<% } else {
%>
<td>   </td>
<% }
break;
} // end primary uomcode
} // end loop through uoms and list price
%>
</tr>
<tr><td align="left" nowrap>
<span class="sectionHeaderBlack">
<%=lMsgMgr.getMessage("IBE_PRMT_CT_YOUR_PRICE_COLON")%>
</span>
</td>
<td>
<% // display selling price for each uom
if (nPriceDefined > 1) {
//prices defined for multiple UOMs for the item
%>
<select name = "uom">
<%
//--------- loop through uoms and prices ------------------
for (int i=0; i < itemSellPriceDisplayVec.size() && i <
uomCodes.length; i++)
if (itemSellPriceDisplayVec.elementAt(i) != null &&
!itemSellPriceDisplayVec.elementAt(i).equals(""))
boolean bSelectUom = false;
if (uomCodes[i] != null && uomCodes[i].equals
(lItem.getPrimaryUOMCode()))
bSelectUom = true;
if (bSelectUom)
%>
<option value="<%=uomCodes[i]%>" SELECTED>
<% } else {
%>
<option value="<%=uomCodes[i]%>">
<% }
%>
<%=itemSellPriceDisplayVec.elementAt(i)%
   <%=IBEUtil.nonNull(lItem.getUOM(uomCodes))%
<%
} // end current uom has price
} //end loop i through uoms and prices
%>
</select>
<% //end more than 1 UOM with price defined for the item
} else {
if (nPriceDefined == 0) { //multiple UOMs, none with
price defined
%>
<input type=hidden name="uom" value="<%
=lItem.getPrimaryUOMCode()%>">
<% } else { // 1 UOM with price defined
String formatSellPrice = "";
String uomWithPrice = "";
for (int i=0; i < uomCodes.length && i <
itemSellPriceDisplayVec.size(); i++)
if (itemSellPriceDisplayVec.elementAt(i) != null &&
!itemSellPriceDisplayVec.elementAt(i).equals(""))
formatSellPrice = (String)
itemSellPriceDisplayVec.elementAt(i);
uomWithPrice = uomCodes;
break;
%>
<input type=hidden name="uom" value="<%=uomWithPrice%>">
<%=formatSellPrice%>   <%=IBEUtil.nonNull
(lItem.getUOM(uomWithPrice))%>
<% } //end 1 UOM with price defined
} // end display selling prices
%>
</td></tr></table> <%-- end table for the price --%>
<% } // end non-configurable item
if (bItemCanBeOrdered)
// show quantity and buttons only if item can be ordered
%>
<p><%=lMsgMgr.getMessage("IBE_PRMT_CT_QUANTITY")%>
<input type="TEXT" name="qty" size="3" maxlength="20"
value="<%=qty%>">
</p>
<% if (lItem.isConfigurable()) {
%>
<p>
<input type=hidden name="uom" value="<%
=lItem.getPrimaryUOMCode()%>">
<input type=submit name="Configure.x"
value="<%=lMsgMgr.getMessage("IBE_PRMT_CT_CONFIGURE")%
"></p>
<% } else {
%>
<p>
<input type=submit name="Add to Cart.x"
value="<%=lMsgMgr.getMessage
("IBE_PRMT_ADD_TO_CART_PRMT_G")%>">
</p>
<%
if (!xprTagArea.equals(""))
%>
<p><%=lMsgMgr.getMessage("IBE_PRMT_CT_OR")%></p>
<p><jsp:include page="<%=xprTagArea%>"
flush="true" /></p>
<% }
} // end item can be ordered
%>
<br>
</form>
</td></tr></table> <%-- end table for bin content and
header --%>
</td></tr></table>
<p> </p>
<p> </p>
</td></tr></table> <%-- end page table --%>
<% } // end item loaded
%>
<%@ include file="ibeCZzdBottom.jsp" %>


my bad...didnt think anyone was gonna come in ...lol......nothing populates in the second drop down...I was thinking of making a separate page and just pass the parameter in, bu i never used jsp include.....any suggestions on how to get this thing working??

Issue with Sender File Adapter

Hi,
In Sender File Adapter I have used content convertion. If the content convetion fails or the channel goes to error state, the sender file channel stops polling. The channel is not polling in the next interval once it goes to error state.
Please help.
Thanks
Aravind

Hi,
That's true.
If one file fails to process due error in content coversion or for any other reason, the channel would stop polling for the next time and also would not process the files following it.
Please correct the content conversion and process the file.
Regards,
Subbu

Entries missing for Condition tables in TADIR

Hi,
I have downloaded certain pricing condition tables from ECC (customizing download). They got generated successfully and were visible as 'Active' in SPRO and ABAP Dictionary (SE11).
When I ran the customizing download again, all the tables had become 'Inactive' in SPRO>Customer Relationship Management>Basic Functions>Pricing>Define Settings for Pricing--> Create Condition Tables.
But at the same time, these tables are appearing as 'Active' in SE11 and condition records are also flowing for them from ECC to CRM.
Having checked the log in Transaction SLG1, there are visibly few errors stating 'Entry not found in TADIR' for some condition tables.
Any pointers to identify the source/cause of this error or how to resolve the same?
Thanks & Regards,
Vartika

Hi Vartika,
The note 457711 will be helpful for you.
Generally these errors on TADIR coversion will not cause any problems on your conditions download..These errors can be ignored.
Please check for inconsistencies between R/3 ad CRM using the note 664815 and correct them. There are reports attached to it for 4 diferent cases.
Thanks
Abishek
Edited by: Abishek Kumar Thiagarajan on Jun 11, 2009 8:58 AM

Transfer Global Settings - Multiple sources

Gurus/Experts,
I have BW system connected to many other r3 systems and i have this problem coming up for unit of measures being different in all this systems ,so when i load data to cube it fails with error saying UOM not available for this record ,I replicate UOM using transfer global settings of BW and it solves issue
Questions here is what happens if i keep on tranferring global settings from different r3 systems will it overwrite or update it
example -
System R31 = 10 units in table T006
system R32 = 10 units in table T006
system R33 = 10 units in table T006
will it show me 30 entries finally or it will only show me the entries from system R33 ONLY ,the last system i replicated in BW
thanks

even if they are not and lets say 2 records are same should be ok rite because finally we need the units value doesnt matter which system gets it
example
system A has value ST
system B has value ST
final table will have value ST since they are not unique ,but thats fine isnt it ,or i am wrong
thanks

Save Nutrient Analysis Web Service

Hi,
I'm trying to consume the Save Nutrient Analysis v3.0 web service of the EP 3.3. And I'm getting the following error:
"RESULT_INVALID_INPUT UOM [ISOCode:GR, Abbreviation:g] not allowed for InfoodsCode:SUGAR"
The complete input I'm giving for NutrienItems is:
<v3:NutrientItems>
<v3:tNutrientItem>
<v3:InfoodsCode>SUGAR</v3:InfoodsCode>
<v3:ValuePer100Gms>0.3298</v3:ValuePer100Gms>
<v3:UOM>
<v33:ISOCode>GR</v33:ISOCode>
<v33:ID>G</v33:ID>
<v33:Abbreviation>g</v33:Abbreviation>
</v3:UOM>
<v3:Source>From Manufacturer</v3:Source>
<v3:Comments xsi:nil="true" />
</v3:tNutrientItem>
</v3:NutrientItems>
I already tried entering different combinations of InfoodsCode and UOM, and still getting the same error message. This is the query I used to get all the possible combinations:
SELECT
   UOM.ID
   ,UOMML.NAME
   ,UOMML.ABBREVIATION
   ,UOM.ISOCODE
   ,FCLNUTRIENT.INFOODSID
FROM
   UOM
INNER JOIN UOMML
   ON UOM.PKID = UOMML.FKUOM
   AND UOMML.LANGID = 0
INNER JOIN FCLNUTRIENT
   ON UOM.PKID = FCLNUTRIENT.FKUOM
I would appreciate your help.
Thanks!
-Victoria

The Data Admin Toolkit allows you to define the allowed UOMs for nutrient items. It is available in the Extensibility Pack.

Error while changing the UoM in material master

Hi experts....
I am not able change the UoM in the material master. Even if, all the PR , PO and reservations are cancelled .
It still gives me error message " Manual Reservations already exists "
Thanx
Ganesh

Hi
may be some entries got not cancelled properly and entries got locked.
Just check in SM12 if no entries are locked.
regards
Sidi

Error Message while entering alternate UOM in BOM, despite being maintained

Hello PP Angels,
I wish for a solution for this issue.
When I am creating a BOM,
while entering the line item, with a material number,
when I enter the UOM for the material, which is the alternate UOM maintained in the material master (already)
I am still getting this error message
"Unit of measure DKG not supported for material XXXXX in plant XXXX"
Wishing for a solution at the earliest.

Hi,
Thanks for the replies, but my issue is not yet solved.
I have checked that earlier
It works that way
But my issue is i have data ( in a different server), such that
the bom is accepting a UOM that is defined in the Alternate UOM and not maintained as the Unit of Issue.
I am trying to replicate the same thing here but when I add an alternate UOM, which is not in Unit of Issue, then error message is thrown while bom creation.
Are any configs to be checked
Awaiting more responses.
Thanks

UOM group error while material document posted throgh BDC( MB01)

Hi All,
we are facing issue while posting material through MB0-goods reciept
error "UOM group not maintaineed for 'XXXXX" material" for some line items,
and i have checked in material master data, UOM group not maintained for some material,
even after maintaind UOM group for those material's still we are facing same problem,
as i checked in BDC code there is no validation for UOM group,
if we posted same PO manual, document posted successfull,
please suggest me.....why this error message coming eventhogh UOM group mainted?
Regards,
Suresh.D

check this link:
Updating Function module for Material master (UoM)
BAPI for MIGO
cheers
Aveek

Error in UOM coversion...

Similar Messages

Maybe you are looking for