Error in update program

Hello All,
we went to BI7.0 upgradation and iam getting the error in the update program message no rsau 484 when the process chain is trying to load the data into infocube and i have found SNOTE 1146851 MENTIONED by SAP according to which i deactivated update rule and reactivated again but still iam getting error .did any of you implemented this note please help me in this regard.
Thanks & Regards
Priya

Hi,
This is because transfer structure is not activate
try replicating the data source in rsds t-code and activate the transfer rules..
sometimes it works
Cheers,
Swapna.G

Similar Messages

Error regarding update program

hi
i am facing an error i.e Error when generating the update program
Can any body give the solution for this question
thanks
gurkiran

hi yogesh
An error occurred during program generation for InfoSource 80FIGL_O02 and InfoProvider ZFIGL_C02. This may be extrapolated to incorrect update rules.
Procedure
Check and correct your update rules and then generate the update program again. but i dont know the procedure Acctually
or the steps Acctaually how to perform on this procedure
kingly explain me in more precise form
Thanks
Regards
Gurkiran

Trying to update creative cloud, comes error: The installation program could not access the important files / directories. Try to run the installer again. (Error code: 43), please contact customer support. The same error comes updating Muse. Mac 10.9.5. W

Trying to update creative cloud, comes error: The installation program could not access the important files / directories. Try to run the installer again. (Error code: 43), please contact customer support. The same error comes updating Muse. Mac 10.9.5. What shall I do?

Alauda_positos I would recommend reviewing your installation log files to determine the exact directory which the installer is unable to access. You can find details on how to locate and interpret your installation log files at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html. You are welcome to post any specific errors discovered to this discussion.
For information on how to adjust file permissions please see Error "Exit 6" or "Exit 7" | Install log | Read, write, system file errors | CS5, CS5.5 - http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html.

I ran an iTunes update. It failed with the message System Error. The program can't start because MSVCR80.DLL is missing from your computer. Try reinstalling the program to fix this problem. I tried reinstalling but get the same message.

I ran an iTunes update. It failed with the message "System Error. The program can't start because MSVCR80.DLL is missing from your computer. Try reinstalling the program to fix this problem." I tried reinstalling but get the same message. I looked in my Recycle Bin for that file name but there is none there. Is this a new file that iTunes wants?

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99683)

Can't download itunes update. Keep getting this error message: THe program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem

Can't download itunes update. Keep getting this error message: THe program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem

I researched the advice on the link provided by b noir as well as very similar advice from apple support: http://support.apple.com/kb/TS5376. It worked for me (for now).
Some things of note:
I did all of the things requested by the link I provided
My computer WOULD NOT uninstall Apple Mobile Device Support. I had to manually remove the folder (also as instructed by the url)
I also uninstalled MobileMe. Was a little different than removing the other apps. Follow instructs provided here: http://support.apple.com/kb/HT2992
I did not uninstall iCloud
I have to admit it was a bit scary removing all those things. Is important to note that when re-installing Apple, follow steps to do so as Administrator (the right-click thingy and whatnot).
Hope this helps!

Error 1720 while updating program

Hi everyone i seem to getting this error message when i try to update the software updater program,
Error 1720,there is a problem with this windows installer package. a script required for this install to complete could not be run,contact your support personnel or package vendor. custom action kill_process script error -2147023828, : Line 5, Colum...
anyone know what to do? i cant install it

http://www.elakiri.com/forum/showthread.php?t=172915&page=30
I copy the relevant content, just in case:
yo its updating...... if u have any problem installing the PC suite try this
error: 'Error 1720. There is a problem with the windows installer package. A script required for this install to complete could not be run. Contact your support personnel or package vendor. Custom action Kill_process script error -2147023898,: line 5 column 1,.
the very best solution:
This is easy to get around. The error is only in Nokia's combined installer, not the NSU installer itself.
1. Download and install 7-Zip. Don't worry it's free!
(No, neither WinRAR nor WinZip will do for this)
Get it here: http://www.7-zip.org/download.html
2. Use 7-Zip to extract the contents of NokiaSoftwareUpdaterSetup_en.exe into a folder. You should now have a bunch of folders and a few files.
3. Go into Packages, then NokiaSoftwareUpdater, then Setup
4. Launch NokiaSoftwareUpdater.msi (double-click it).
5. That's it!
Bruno Unna
Public key available.

Error when generating the update program RSAU484

Hi,
I am getting the following error while loading data into customer master from CRM system
Error when generating the update program
Message no. RSAU484
Diagnosis
An error occurred during program generation for InfoSource MR_CDB_CUST_HFR and InfoProvider 0BPARTNER$T. This may be extrapolated to incorrect update rules.
Procedure
Check and correct your update rules and then generate the update program again. You can find help on the error in the error log.

Yes,there is just a single line of code in the start routine
DELETE DATA_PACKAGE WHERE CUSTOMER is initial.
and update rules for Business partner and customer market which are object mapped 1:1. No routines or formulaes.
Could this be a technical issue on the flexible update or a data quality ?

Error when generating the update program

Hi BW Experts,
I am facing issue while loading data to cubes:
0TCT_C01 & 0TCT_C02
In load monitor (RSMO) -> details> some data pakages are going thru successfully while some are failing with error:
Error when generating the update program
Thanks

Hello,
Try activating both the cubes using RSDG_CUBE_ACTIVATE. Activate them even thou they seem active.
Also you can refer to OSS Notes:
Note 1146851 - BI 7.0 (SP 18): Error RSAU 484 when generating update
Note 1152453 - Termination generating InfoCube write program
Regards,
Shashank

Error when generating update program

Hi,
I was loading transactional data in to Cube. The load had failed and in RSMO status tab is showing that Error when generating update program. could you please suggest me some one how to resolve it.
regards,
Neeraja
null

Hi,
Actually when you are loading data, the update program is executed. It is generated while you create the update rules for your data target. Please check whether the update rules are active or just go to the update rules and activate it again. Try loading data after activation and let us know the results.
With Regards

BW Statistics-BI7-Error when generating the update program

Dear All,
We faced the below problem in while executing the infopackages for BW statistics in BI7.0
7099 records from 7099 records..but shows request is red.
Error message during processing in BI
Diagnosis
An error occurred in BI while processing the data. The error is documented in an error message.
System Response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Update rules
Procedure
Check the error message (pushbutton below the text).
Select the message in the message dialog box, and look at the long text for further information.
Follow the instructions in the message.
Update rules ( 7089 -> 0 Records ) : Errors occurred (RED)
Update rules ( 7089 -> 0 Records ) : Errors occurred
InfoCube 0TCT_C23 will be updated
Error when generating the update program (RED)
Is there any notes to apply for this?
Initilaztion is executed with out any errors!!
Regards

Hi
Caller 01 : If there is any inconsistecy while loading the data or if the program cannot able to execute a specific task it will give the caller errors.
check in the transaction ST22
check for the OSS notes 631668, 860475
Check the below links which have a discussion on the same problem.
A caller 01, 02 or equal to or greater than 20 contains an error meesage
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
ERROR?
Data load System error
Hope this will help
Regards
Shilpa

Error when generating the update program::::ID RSAU No. 484****

Helllo,
While Infopackage loading for DS 2LIS_04_P_COMP following error is coming.. please see if anyone may face such kind of error.
***Error when generating the update program::::ID RSAU No. 484***
Diagnosis
     An error occurred during program generation for InfoSource
     2LIS_04_P_COMP and InfoProvider ZISPP_C01 . This may be extrapolated to
     incorrect update rules.
Procedure
     Check and correct your update rules and then generate the update program
     again. You can find help on the error in the error log.
amit shetye

hi,
Do a check on the update rules and see if it returns no errors...
if that is the case, then check the short dump and try to get the program name for the update rules..In se38 putting the program name, you can go inside it and do a check there as well if there are any errors....
If in the end yo still dont find anything, try to delete and re-create the update rules..
But i think you will get quite useful info from the dumps if there are any..
hope this helps you..
regrds,
Jadeep

R5034 Runtime error when updating ITunes help - deleted all iTunes/Apple programs and reinstalled ITunes

R5034 Runtime error when updating ITunes help - deleted all iTunes/Apple programs and reinstalled ITunes
help please ?

solved problems and reinstalled - 4 hours wasted trying to fix iTunes ...
Apple could do better to inform users when updating and upgrading .....

Update program error

Hello Experts,
Every once in while a text load in a process chain fails with the following error
Error when generating the update program
Message no. RSAU484
Diagnosis
An error occurred during program generation for InfoSource XXXX_TEXT and InfoProvider XXXX. This may be extrapolated to incorrect update rules.
Procedure
Check and correct your update rules and then generate the update program again. You can find help on the error in the error log.
Doing a repeat on this part of the chain completes the process successfully every single time. Also this is error does not occur every time we run the load but once a month or so.
According to OSS notes it may be because an infoprovider is being loaded simultaneous. In out case this is possible but when I looked closely at the error times its clear that there are no simultaneous loads.
Did anyone else come across this problem?
Helpful answer will be rewarded.
MM

1) Perform a syntax check on your Update Rule for any errors, if any correct them.
2) Generate your update rule program via transaction se38.
3) Avoid parallel loads for InfoObjects.

I was updating ITunes and got error message that program cannot start because MSVCR80.dll is missing

I was updating ITunes and I got an error message that program can't start because MSVCR80.dll is missing. what do I do?

I have the same problem and in following the Apple recommended procedures of unistalling Apple iTumes and related programs I am not able to unistall"Apple Mobile Device Support" as recommended. It is recommended that I delete all related files before installation! How do I proceed?

Error in Updating a Result Set Programmatically

Could anyone please help me !
Why the row is always corrupted after executing the following code.
I am using JDK 1.4 , the default JDBC:ODBC driver from sun and MS Access 2000
try
rs.updateString(1,jtfCity.getText().trim());
rs.updateString(2,jtfCountry.getText().trim());
rs.updateInt(3,Integer.parseInt(jtfPop1995.getText().trim()));
rs.updateInt(4,Integer.parseInt(jtfPop2015.getText().trim()));
rs.updateRow();
catch(SQLException sqle)
System.err.println("Error in update row");
System.err.println(sqle);
System.err.println(sqle.getMessage());
System.err.println(""+sqle.getErrorCode());

Thanks for replying
This is what I get:
java.sql.SQLException:[Microsoft][odbc Microsoft Access Driver]
Let me give you more background information. I am new in JDBC and is learning it by going through the examples in "JDBC API Tutorial and Reference 2nd Ed." published by SUN. I am using sdk1.31 (and have also tried sdk1.4) with Microsoft Access 2000. The demo program I am working with is trying to update a ResultSet programmatically using updateXXX().
scrolling and row deletion using rs.delete() are ok.
Here are my connection statements:
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
          connection = DriverManager.getConnection(sourceURL);
          statement = connection.createStatement(     ResultSet.TYPE_SCROLL_SENSITIVE,
                                                            ResultSet.CONCUR_UPDATABLE);

Error in update program

Similar Messages

Maybe you are looking for