Error in update rule during activation

Hi  All,
I  am updating data from a DSO to infocube which are all migrated versions from BW 3.5.to BI-7.0 The update rule to the infocube is fine and without errors when i check it. However on activation , a short dump is being generated.  The message class of the eror is RSAA and message number is 108X,which says it is an internal error. Please can any of you advice a solution.
Many thanks in advance.

Ram,
Check your char and time char properly mapppled for all filed with refereing key figures.
Thnaks
Thota

Similar Messages

  • Uknown Error in update rules while loading into InfoCube

    I load data from BC 0FIAR_O03 ODS into BC 0FIAR_C03 ICube.
    While loading I got error on second data package (1st package loading ok)
    The error message in monitor informs about error in update rules.
    I got nothing special than I looked into Application Logs (tcode SM21). It tells about message 560 with addition "no documentation exists for message 00560"...
    I can't get what's wrong. The update rules for ICube is BC without any modifications and data loaded succefully into ODS.... Any ideas?? Where I can find more inforamtion about error occured during update??

    update rule terminated if data load contains more than 1 data package. don't know why. I solved problem by spliting load process by Fiscal Year ranges

  • Update rules not active

    Actually i installed the 0CDS_C01 AND ,0CDS_C02( Sales Scheduling agreement Processing).when i'm activating the update rules its giving error message like
    "IC=0CDS_C02 IS=80CDS_DS07 error when checking the update rules".
    whts reason for this? its urgent...
    Thanks

    the update rules get activated only when all the depenedent bject on
    update rules get activated.
    so go to object type and select the update rule with before collection and then
    activate the same
    pls assign points if helpful.

  • Error in Update Rules

    Hi All,
    I am encountering  the below  error while activating the update rules of  0LIV_DS01
    IC=0LIV_DS01 IS=2LIS_06_INV syntax error: The type "/BI0/OISR_SVP_LSY" is unknown
    Please guide me.
    Thanks.....

    /BI0/OISR_SVP_LSY exist in your system? Maybe any transport is missing (InfoObject OISR_SVP_LSY)

  • Error in update rules in inventory

    Hi Gurus,
    I have a problem with the update rules.I am getting the syntax error in Production when checking in the update rules. It says the program "INCLUDE report "RSBCTGN_TOP" not found".
    Actually these update rules were working correctly in Development.
    Is there anyway to transport that program alone or do i have any other way to handle that in Production itself as i have access to it.
    Thanks in advance.
    Regards,
    venkat

    Hi,
    first try with SE38 if this include RSBCTGN_TOP is existing and active, if inactive activate it.
    also check whether infoobject 0GN_BWBEOTY is active.
    /manfred

  • Error while updating the Actual Activity Prices

    Dear All,
    While calculating the Actual activity prices under test run (KSII) ,the system is calculating the prices correctly, but when I run the KSII after deselecting the test run ,the system is giving the following error message:
    Cost center EE04301000 activity type RWKHRS: costs exist although activity 0
    Message no. KP250
    Diagnosis
    The plan or actual activity for cost center EE04301000, activity type RWKHRS is 0. However, costs were planned or posted in period(s) 1.
    System Response
    The SAP System cannot calculate activity prices for this activity type as this would involve division by zero. The plan or actual costs are ignored in activity price calculation.
    Procedure
    Check activity price calculation in planning for activity type RWKHRS in cost center EE04301000 and the costs planned for period(s) 1.
    Activity Type Planning
    Primary Cost Planning
    For activity price calculation in actual, actual costs are allocated onto the activity type through splitting, although no activity posting was made on this activity type.
    The scenario is that we have 4 activity types and planned costs/activity qty for all the 4 activities and calculated plan prices and posted actual costs for all the four types. Production Order created and confirmed only 3 activities out of 4 activities. And when we calculate the Actual prices for all 4 activities the system is giving the above said message.
    Please suggest as how to solve this issue.  
    Regards
    Subbu

    Hi Subbu
    The error is very much justified.. If your actual qty for any act type is zero, then division by zero would yield an error during activity price calculatoin
    You need to ignore this error, if the zero qty for 4th act type is justified.. System would post act price for remaining 3 act types...
    Regards
    Ajay M

  • Error in Update rules while defining CKF at cube level

    Hi,
    I am willing to create a Calculated Key figure at CUBE level using formula function
    <b>Unit Cube: Item Cube / Units</b>
    <b>Definitation</b>
    Item Cube - Total Cube for line
    Units   - Actual destination quantity in alternative unit
    <b>Units</b>
    The Unit for ‘Item Cube’ is Volume unit and
    The Unit for ‘Units’ is Alternative Unit of Measure for Stock keeping Unit
    When i tried to create CKF at Cube level in update rules using formula it is displaying me an error that no unit is available in source system for the CKF Unit Cube
    How can I proceed on this
    Thanks

    Hi
    Have you transferred the global settings from the context menu of source system where all the units from the source is replicated to BW system
    Regards
    N Ganesh

  • Error in update rules mapping

    Hi,
    I have added two new fileds into the view and then replicated in bw side.The two fields mapping correctly in Transfer rules.Getting error for two fileds while adding in the update rule.
    Thanks,
    Jayapal.

    Hi Jayapal,
    Hope, SAP Note 588247 will help you to resolve this issue. It is giving "Rule incorrect" error, may be because of Infoobject 0RECORDMODE is ignored.
    Veerendra.

  • Error in Update Rule migration using "Create Transformation"

    Hi gurus,
    We are encountering errors in the migration of our 2LIS_03_BF and 2LIS_03_BX update rules into a transformation via URs Context Menu    Additional functions - > Create transformation
    This action creates a new transformation, but is only generating very little Routine assignements in our KF fields. That is, some KF have their old ABAP converted automatically into ABAP OO while the rest (majority) of KF fields have no rule (routine) assigned at all.
    However, the most surprising thing is that after executing the "Create Transformation", the log shows everything correct and warnings (message 652 "Routine created. Verify sintax").
    Have you ever faced this problem?
    Is the automatic migration tool working correctly?
    If not, do we need to manually create all those KF routines that have not been correctly been migrated? Even after two years since new dataflow that was released?
    We are on SP 15...
    Thanks and best regards,
    Enric

    Hi Juanjo,
    In fact, if I understand you correctly, I'm facing the same situation: all FORMS based on OLD individual KFs routine are now available in the global transformation routine in ABAP OO, but what I'm missing is the individual source to target KF field mapping to routine, where the method with the perform to each coding should be done.
    Shall I understand this is a common bug? Manual correction proposed?
    Thanks,
    Enric

  • Currency conversion error in Update rules for 0SD_C03

    Hi All
    I have freshly installed Sales Overview cube 0SD_C03 from BI Content(3.x version) and when extracting data from datasource "2LIS_13_VDITM" there is an error "Error: Conversion foreign curr. -> local curr.: 0090000000 20080516 M -> SGD".
    Till PSA data is loading fine, there is error while loading from PSA to cube(ie. in Update Rule).
    Checked in the PSA for the errored records, all the records which have 0(zero) as amount are green and the rest of them are errored with the above message.
    When checked in the manage cube there are added records but the request is red.
    Please let me know if some one as the clue.
    Regards
    Jayant

    Hi
    You will find the transfer global settings for the source system where you are extracting the data.
    Select the source sytem, right click,go to transfer gloabal settings, (select the currencies in this)
    Then Reload the data into the cube,
    After, Reloading the data into the cube replicate the master data, and activate the mappings,and load the data.
    I think, this will work....
    Regards
    Sudheer

  • Error in update rules *urgent*

    Hello all,
    We got error in loading 2LIS_03_BF due to loss of connectivity to source system ,
    After correcting the connection  I tryed to reload the delta.
    while loading we got all the records <i>(100000 of 100000)</i> but the processing is still running at
    <b>Second step in update</b>
    plz through light on this issue
    Regards..... SAP

    Hi SAP,
    HAs the extraction been finished for your data load? If so are you able to see the data packets in processing in yellow state? then try making the status red and then update the data pckages manually.
    If your data packets taking time to get processed in the update rules stage, reduce the data packet size and then reload, this should give less records to process in the update rules.
    Regards
    Srini

  • Error in update rules when trying to add a field

    Hi Gurus,
    I would appreciate if u could help me out.
    I am trying to add the field Cumulative order quantity in sales unit ( 0CML_OR_QTY) in the update rule of 2LIS_11_VAITM. The field already exists in transfer rule and communication structure. When i am trying to add the field its giving and error message :No routine has been created for InfoObject BP:Business Partner Group (from Hierarchy) (data ield: Cumulative order quantity in sales units).
    I have tried to make the BP field as initial value. But still the same error persisted.
    Kindly let me know as to how to proceed.
    Thanks & Regards,
    Kapil

    Hi,
    Are you creating update rules for a ODS or a cube. If it is an ODS please make sure that none of your Key Fields are referring to the routine.
    Now first please add this 0CML_OR_QTY to your data target and activate it. Once you do that you will see that it will automatically come in the update rules and will be not assigned. Now once this is done you can assign the required value
    Regards,
    Pramod

  • For 0PS_C02  cube  Project System - Dates update rules not activated!!

    Hi All,
    When we are trying to install update rules from the BI content for PS module  for the cube "0PS_C02  Project System - Dates",  the
    update rules are not activating. under the cube when BI content activation. What is the issue in activating the update rules from BI content. From BI content the available version objects only will be activated i think. Please rectify and resolve the same at the earliest friends.
    thanks,
    Sakali

    Hi,
    Try to activate through program RSAU_UPDR_REACTIVATE_ALL.

  • Error in Update rule

    Hi Gurus,
    I need to find out what caused the update rule in the production to become inactive.
    I use SM37 JOB LOGS, BW Monitor but I could not find out. Any advice.
    Thanks
    Liza

    Hi Liza,
    Check the following.
    1. Go to the UR and click on the 'check' button ( second button from left menu bar ).  It will give the error details.
    Inactivation also can be caused due to  the improper transport of the data target,
    update routines/start routines changes.
    Hope it helps.
    Regards,
    Aditya

  • Error with Update Rule Formula

    I have the following formula in an update rule
    CALMONTH_FISCPER( Calendar Year/Month, 'SO', 1 )
    and get the error (below) when loading data to the cube (loads ok to PSA).  I have checked ROUTINE_0001 via the Generated Program and it is referring to a problem with the formula could someone assist? Thanks
    error in a formula function (ROUTINE_0001 routine)

    Hi:
    Yes. You will have to maintain Fiscal Variant and Period breakdowns for that year.
    If data is coming from R/3, its a good idea to speak with R/3 Finanace and tell them to amintains variant and periods in R.3 and then you can do a Global Transfer.
    If not, you can maintain them directly in BW. I think you know how to do this part.
    Ram Chamarthy

Maybe you are looking for