Error in update rules in inventory
Hi Gurus,
I have a problem with the update rules.I am getting the syntax error in Production when checking in the update rules. It says the program "INCLUDE report "RSBCTGN_TOP" not found".
Actually these update rules were working correctly in Development.
Is there anyway to transport that program alone or do i have any other way to handle that in Production itself as i have access to it.
Thanks in advance.
Regards,
venkat
Hi,
first try with SE38 if this include RSBCTGN_TOP is existing and active, if inactive activate it.
also check whether infoobject 0GN_BWBEOTY is active.
/manfred
Similar Messages
-
Uknown Error in update rules while loading into InfoCube
I load data from BC 0FIAR_O03 ODS into BC 0FIAR_C03 ICube.
While loading I got error on second data package (1st package loading ok)
The error message in monitor informs about error in update rules.
I got nothing special than I looked into Application Logs (tcode SM21). It tells about message 560 with addition "no documentation exists for message 00560"...
I can't get what's wrong. The update rules for ICube is BC without any modifications and data loaded succefully into ODS.... Any ideas?? Where I can find more inforamtion about error occured during update??update rule terminated if data load contains more than 1 data package. don't know why. I solved problem by spliting load process by Fiscal Year ranges
-
Error while activating update rule in Inventory
I was working with migration of datasource 2LIS_03_BF from 3.x to 7.0 in MM module.
Recieved an error while activating update rule 0RT_C17 2LIS_03_BF in Inventory module.
When I checked the routine ,it shows the following error.
Errror:E:The Dictionary structure or table "/BI0/PMAT_SALES" is either not active or does not exist.
I am not usre how to resolve this.
Kindly reply asap.1. Activate the master data infoobject for 0MAT_SALES at info object level of RSA1
2. Replicate and Activate the data source once again by using the program > SE38 : RS_TRANSTRU_ACTIVATE_ALL
3. Then try to migrate you datasource and activate you update rules.
it may help you
Regards.
Rambabu -
Error in Update rules while defining CKF at cube level
Hi,
I am willing to create a Calculated Key figure at CUBE level using formula function
<b>Unit Cube: Item Cube / Units</b>
<b>Definitation</b>
Item Cube - Total Cube for line
Units - Actual destination quantity in alternative unit
<b>Units</b>
The Unit for Item Cube is Volume unit and
The Unit for Units is Alternative Unit of Measure for Stock keeping Unit
When i tried to create CKF at Cube level in update rules using formula it is displaying me an error that no unit is available in source system for the CKF Unit Cube
How can I proceed on this
ThanksHi
Have you transferred the global settings from the context menu of source system where all the units from the source is replicated to BW system
Regards
N Ganesh -
Hi,
I have added two new fileds into the view and then replicated in bw side.The two fields mapping correctly in Transfer rules.Getting error for two fileds while adding in the update rule.
Thanks,
Jayapal.Hi Jayapal,
Hope, SAP Note 588247 will help you to resolve this issue. It is giving "Rule incorrect" error, may be because of Infoobject 0RECORDMODE is ignored.
Veerendra. -
Error in Update Rule migration using "Create Transformation"
Hi gurus,
We are encountering errors in the migration of our 2LIS_03_BF and 2LIS_03_BX update rules into a transformation via URs Context Menu Additional functions - > Create transformation
This action creates a new transformation, but is only generating very little Routine assignements in our KF fields. That is, some KF have their old ABAP converted automatically into ABAP OO while the rest (majority) of KF fields have no rule (routine) assigned at all.
However, the most surprising thing is that after executing the "Create Transformation", the log shows everything correct and warnings (message 652 "Routine created. Verify sintax").
Have you ever faced this problem?
Is the automatic migration tool working correctly?
If not, do we need to manually create all those KF routines that have not been correctly been migrated? Even after two years since new dataflow that was released?
We are on SP 15...
Thanks and best regards,
EnricHi Juanjo,
In fact, if I understand you correctly, I'm facing the same situation: all FORMS based on OLD individual KFs routine are now available in the global transformation routine in ABAP OO, but what I'm missing is the individual source to target KF field mapping to routine, where the method with the perform to each coding should be done.
Shall I understand this is a common bug? Manual correction proposed?
Thanks,
Enric -
Currency conversion error in Update rules for 0SD_C03
Hi All
I have freshly installed Sales Overview cube 0SD_C03 from BI Content(3.x version) and when extracting data from datasource "2LIS_13_VDITM" there is an error "Error: Conversion foreign curr. -> local curr.: 0090000000 20080516 M -> SGD".
Till PSA data is loading fine, there is error while loading from PSA to cube(ie. in Update Rule).
Checked in the PSA for the errored records, all the records which have 0(zero) as amount are green and the rest of them are errored with the above message.
When checked in the manage cube there are added records but the request is red.
Please let me know if some one as the clue.
Regards
JayantHi
You will find the transfer global settings for the source system where you are extracting the data.
Select the source sytem, right click,go to transfer gloabal settings, (select the currencies in this)
Then Reload the data into the cube,
After, Reloading the data into the cube replicate the master data, and activate the mappings,and load the data.
I think, this will work....
Regards
Sudheer -
Error in update rules *urgent*
Hello all,
We got error in loading 2LIS_03_BF due to loss of connectivity to source system ,
After correcting the connection I tryed to reload the delta.
while loading we got all the records <i>(100000 of 100000)</i> but the processing is still running at
<b>Second step in update</b>
plz through light on this issue
Regards..... SAPHi SAP,
HAs the extraction been finished for your data load? If so are you able to see the data packets in processing in yellow state? then try making the status red and then update the data pckages manually.
If your data packets taking time to get processed in the update rules stage, reduce the data packet size and then reload, this should give less records to process in the update rules.
Regards
Srini -
Error in update rules when trying to add a field
Hi Gurus,
I would appreciate if u could help me out.
I am trying to add the field Cumulative order quantity in sales unit ( 0CML_OR_QTY) in the update rule of 2LIS_11_VAITM. The field already exists in transfer rule and communication structure. When i am trying to add the field its giving and error message :No routine has been created for InfoObject BP:Business Partner Group (from Hierarchy) (data ield: Cumulative order quantity in sales units).
I have tried to make the BP field as initial value. But still the same error persisted.
Kindly let me know as to how to proceed.
Thanks & Regards,
KapilHi,
Are you creating update rules for a ODS or a cube. If it is an ODS please make sure that none of your Key Fields are referring to the routine.
Now first please add this 0CML_OR_QTY to your data target and activate it. Once you do that you will see that it will automatically come in the update rules and will be not assigned. Now once this is done you can assign the required value
Regards,
Pramod -
Hi All,
I am encountering the below error while activating the update rules of 0LIV_DS01
IC=0LIV_DS01 IS=2LIS_06_INV syntax error: The type "/BI0/OISR_SVP_LSY" is unknown
Please guide me.
Thanks...../BI0/OISR_SVP_LSY exist in your system? Maybe any transport is missing (InfoObject OISR_SVP_LSY)
-
Error in update rule during activation
Hi All,
I am updating data from a DSO to infocube which are all migrated versions from BW 3.5.to BI-7.0 The update rule to the infocube is fine and without errors when i check it. However on activation , a short dump is being generated. The message class of the eror is RSAA and message number is 108X,which says it is an internal error. Please can any of you advice a solution.
Many thanks in advance.Ram,
Check your char and time char properly mapppled for all filed with refereing key figures.
Thnaks
Thota -
Hi Gurus,
I need to find out what caused the update rule in the production to become inactive.
I use SM37 JOB LOGS, BW Monitor but I could not find out. Any advice.
Thanks
LizaHi Liza,
Check the following.
1. Go to the UR and click on the 'check' button ( second button from left menu bar ). It will give the error details.
Inactivation also can be caused due to the improper transport of the data target,
update routines/start routines changes.
Hope it helps.
Regards,
Aditya -
Error with Update Rule Formula
I have the following formula in an update rule
CALMONTH_FISCPER( Calendar Year/Month, 'SO', 1 )
and get the error (below) when loading data to the cube (loads ok to PSA). I have checked ROUTINE_0001 via the Generated Program and it is referring to a problem with the formula could someone assist? Thanks
error in a formula function (ROUTINE_0001 routine)Hi:
Yes. You will have to maintain Fiscal Variant and Period breakdowns for that year.
If data is coming from R/3, its a good idea to speak with R/3 Finanace and tell them to amintains variant and periods in R.3 and then you can do a Global Transfer.
If not, you can maintain them directly in BW. I think you know how to do this part.
Ram Chamarthy -
Error in activating the update rules
Hi All
I am getting an error while activating Business Content update rules.
I have activate Cube and corresponding InfoCube and was trying to select update rule for the Cube and installing it.
It however gives an error saying Update Rules (Technical Name) are not found.
Anyone encountered this in the past.
If yes let me know the remedy
Regards
PBHi P B,
This might be a long shot, but I still want to see if I can be of any assistance:
Have you encountered SAP note 789272 and SAP note 787875?
They should be contained in SP 19 for BW 310, and your errors do resemble those we encountered, albeit using a different version of BW. These notes are relevant for both mine and your version.
Otherwise, I'll gladly have a look at your error messages you can send over here.
Best Regards,
Daniel -
Hi Friends,
I am installing Update rule for info Cube name: 0PAPA_C02 ( HeadCount ).
I am facing problem in installing update rule wiht following error "Object Update rules 907KB92TLFDNXIKNGFCS15IN4: Error installing the Content version" , can any one will help on this.
I shall be glad for every one for positive reply.
Regards
DeepakHi Mansi,
As per SAP Note No 336229, we are installing info cube 0PAPA_C02 ( Headcount ) with Grouping selection as "In dataflow before and after" . On simulation we got this error only. pl. suggest where to find detail logs for this..
info source is active.
Note no 336229 Detail
Do the following steps in your BW System:
1. Transfer the Business Content in the Administrator Workbench:
Choose InfoCube 'Headcount' (0PAPA_C02), collect all objects with
grouping 'Data flow before and after' and copy them from the Business
Content afterwards.
Check whether key figures 0ANSAL_NC / 0ANSAL_VC, 0HDFTE_NC / 0HDFTE_VC
and 0HDCNT_NC / 0HDCNT_VC were activated in the process.In addition,
InfoCube 0PAPA_C02 itself, InfoSource 0HR_PA_PA_1 and the respective
update rules should be active.
Regards
Deepak
Maybe you are looking for
-
Sent messages aren't saved in the Sent Items folder in Outlook 2013
When we send a message in Outlook 2013, a copy of the message should be saved in the Sent Items folder by default. If Outlook doesn’t save a copy of the sent message, it may be caused by any one of the following reasons: The “Save copies of messages
-
Can I Change/ Extend the vendor from one purcahse Organisation to Other Pur
Dear Al Is it possible to Change/extend the Existing vendor to the new Purchase organisation or again we should create new vendor for the under the New Purchase organisation. Can you help me out please. Senario: We have 3 business areas earlier we h
-
Why are someone elses photo albums showing up in my icloud account on apple tv?
Logged in to my account on iCloud on Apple TV. It did not ask for my password, and it is now showing me hundreds of photos of a very nice family ... whom I have never met. I am unable to see any of my photos, but I have the personal photos of somoe
-
T40's Left Shift key makes right click/context menu appear?
Hello All- On my T40, on which I just recently got Windows 7 correctly installed, has a curious behavior: When I press the left shift key, it functions the same as if I had pressed the right mouse button. It functions correctly otherwise, I.E., when
-
Is iPhone 4 still can downgrade from 7.1.2 to 6.1.3 ?
i have a iphone restore crash, after 3 days i try to restore my iphone they always show error 3194... i had try all the way to restore it, "editing host file", tiny umbrella and many more, but my iphone still doesnt want to restore... and now i try t