Error in updating SAP Basis Pack

Dear All,
I have fresh Install SAP 4.7 with SQL 2000. When I am updating basis Support pack i.e SAPKB62021.
It give messege
Error in Phase :-XPRA_EXECUTION
Reasion for error :TP_STEP_FAILURE
Return Code : 0008
Please help
Thanks & Regards
Issam CHIBOUNI

Dear shok,
Normally tms was configured i done it before applying patches? but i have some probleme in tms alert viewer:
Function
Message
TMS_WBO_READ_REQUEST                    READ_DOCU_FAILED
TMS_TP_SHOW_BUFFER                          TP_REPORTED_ERROR
TMS_TP_ADD2BUFFER                           TP_REPORTED_ERROR
TMS_TP_SHOW_BUFFER                          TP_REPORTED_ERROR
TMS_TP_SHOW_BUFFER                          TP_REPORTED_ERROR
TMS_TP_ADD2BUFFER                           TP_REPORTED_ERROR
TMS_TP_SHOW_BUFFER                          TP_REPORTED_ERROR
TMS_PS_READ_PROFILE_FROM_DISK               READ_PROFILE_FAILED
TMS_PS_READ_PROFILE_FROM_DISK               READ_PROFILE_FAILED
TMS_PS_READ_PROFILE_FROM_DISK               READ_PROFILE_FAILED
thanks for your help.

Similar Messages

Error while updating SAP Integration Kit XI 3.1 to SP3

Dear All,
I have updated BusinessObjects Enterprise XI 3.1 and Integration Kits for SAP XI 3.1 to SP3.
The update of BusinessObjects Enterprise XI 3.1 was fine. While updating IK for SAP, the installation shown the following error
sapweb_rri.dll failed to register.
sapweb_parameter.dll failed to register
Then I completed the installation by 'Ignore' ing the above installer informations.
Now I am getting the following error
"Account information not recognized: Plugin Manager error: Unable to locate the requested plugin secSAPR3 on the server. (FWB 00006)"
Before the update, the setup was working fine.
Does this ignored error caused the problem?
Please help me to resolve the issue.
Thanks and Regards,
Yuvaraj

Thank you.
I have the following questions, for this full installation of IK SP3,
I have imported transports from IK XI 3.1 for R/3 and BO connection in R/3.
Does the transport that comes with IK SP3 is modified?
And also some reports are developed based on the datas from R/3.
Does this complete uninstallation of IK affects the existing contents?
Regards,
Yuvaraj.

Repository import error for SAP Basis 640 SWC

Hi,
I am getting an error when importing SAP Basis 640 Software components into Integration repository. It is giving thsese java errors:
com.sap.engine.services.ejb.exceptions.BaseRemoteException: Exception in method importFromImportSource. at com.sap.aii.ib.sbeans.transport.TransportServiceRemoteObjectImpl10.importFromImportSource(TransportServiceRemoteObjectImpl10.java:850) at com.sap.aii.ib.sbeans.transport.TransportServiceRemoteObjectImpl10p4_Skel.dispatch(TransportServiceRemoteObjectImpl10p4_Skel.java:100) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:304) at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:193) at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:122) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Caused by: java.lang.NoClassDefFoundError at com.sap.aii.utilxi.core.strings.StringConversion.xml2String(StringConversion.java:645) at com.sap.aii.utilxi.dtd.api.DtdHelper.getString(DtdHelper.java:381) at com.sap.aii.utilxi.dtd.api.DtdParser.parseInputSource(DtdParser.java:68) at com.sap.aii.ibrep.bom.extdef.DtdInternalExternalCategoryService.getDtdSchema(DtdInternalExternalCategoryService.java:72) at com.sap.aii.ibrep.bom.extdef.DtdInternalExternalCategoryService.getExternalReferences(DtdInternalExternalCategoryService.java:48) at com.sap.aii.ibrep.bom.extdef.ExternalCategoryServiceImpl.getExternalReferences(ExternalCategoryServiceProvider.java:51) at com.sap.aii.ibrep.bom.extdef.ExternalDefinition.getExternalReferences(ExternalDefinition.java:35) at com.sap.aii.ibrep.server.persist.extdef.ExtDefInternalPersistSevice.writeTypeData(ExtDefInternalPersistSevice.java:95) at com.sap.aii.ib.server.persist.gen.PersistServiceProvider$PersistServiceImpl.writeObjectVersion(PersistServiceProvider.java:446) at
The environment is same as in our development server.
Any idea what causes this error.
Thanks for your help.
Madhu

Hi Vijay,
1.Check the pre-requsites of Basis patch # 9.
2.What is your abap patch # ?
3.Sometimes if you apply the patches by bundling them in queue,it will error out.
4.Try to clear the import queue,and apply the patches one after another instead of in queue.
I hope this helps,reply back.
Rgs
vikas

Error on WAS no. 10054 SAP Basis System: Operating system call

Hi All,
Error on WAS no. 10054 SAP Basis System: Operating system call
we got the following error message in the syslog of the WAS:
SAP Basis System: Operating system call recv failed (error no. 10054)
The system still works. What can we do?
Thanks.
Best Regards,

Hi,
Please check the folloiwng notes
Error no. 10054
34116 - Syslog: "Operating System call xxxx failed"
Thanks
Adil

Error while installing Mini SAP Basis system 4.6D test suite

Hi Gurus,
I am getting error while installing Mini SAP Basis system 4.6D test suite on my laptop. I trying to install this version under Windows Xp. I tried so many times to rectify this error but no use. i followed the instruction in the readme file.The error is below in quote.
"InstController MakeStepsDeliver:108 connection to GUI of installation tool has been cut off.Installation has been stopped."
your help very much appreciated...
Regards
dinesh.a

is win xp supported for mini sap 46d?
-> try netweaver 2004s instead ...
GreetZ, AH

IE8 unsupported error after updating to ZCM 11 Support Pack 1 (11.1)

Does any experience this problem after updating to ZCM11sp1?
I keep getting IE8 unsupported error after updating to ZCM 11 Support
Pack 1 (11.1) although I am running on IE8 already. Now remote
management is not working because of this incompatible browser errors. I
tried this following
link:http://www.novell.com/support/viewCo...9158&sliceId=1
But it does not help.
Any suggestion or idea would be greatly appreciated!!!

On 8/29/2011 8:26 AM, craig wilson wrote:
> Double Check all of your settings there, including the option to view
> Intranet sites in compatibility mode.
>
> For some reason, your IE8 is reporting itself as IE7 and running in IE7
> mode which is no longer supported.
>
> On 8/29/2011 9:17 AM, April wrote:
>> Does any experience this problem after updating to ZCM11sp1?
>>
>> I keep getting IE8 unsupported error after updating to ZCM 11 Support
>> Pack 1 (11.1) although I am running on IE8 already. Now remote
>> management is not working because of this incompatible browser errors. I
>> tried this following
>> link:http://www.novell.com/support/viewCo...9158&sliceId=1
>>
>>
>>
>> But it does not help.
>>
>> Any suggestion or idea would be greatly appreciated!!!
>
>
Thank you for your responding. I have already checked to view Internet
sites in compatibility mode with no luck. I tried several different
computers with IE8 but they all got the same problem.

Error while configuration step for Oracle Customer MDM base pack

The second step of MDMCustomerBase Import seeddata is failing, in the configuration step of Oracle Customer MDM base pack
please help

Also In oracle AIA 11g configuration wizard the logs are as:
BUILD SUCCESSFUL
Total time: 2 minutes 5 seconds
'choice' is not recognized as an internal or external command,
operable program or batch file.
Step Prepare Properties file ended successfully
Step Prepare Properties file ended successfully
MDMCustomerBase Import Seeddata
Error
Failed to import Seeddata
Step MDMCustomerBase Import Seeddata failed
Failed to import Seeddata
Step MDMCustomerBase Import Seeddata failed
Log
Step MDMCustomerBase Import Seeddata started
Buildfile: AIAPLWImportData.xml
[echo] AIA HOME: E:\\\Middleware\AIAHome11g
[echo] AIA Instance: E:\\\Middleware\AIAHome11g/aia_instances/AIAIns11
[echo] Importing E:\\\Middleware\AIAHome11g\data\MDMCustomerBase\PLWSeedData\MDMCustomerBaseSeed.xml
all:
[echo] Executing /c E:\\\Middleware\AIAHome11g/Infrastructure/LifeCycle/PLWImExport/PLWImport.bat -f E:\\\Middleware\AIAHome11g\data\MDMCustomerBase\PLWSeedData\MDMCustomerBaseSeed.xml
[echo] Shell: cmd.exe
BUILD FAILED
E:\Middleware\AIAHome11g\Infrastructure\Install\AID\AIAPLWImportData.xml:48: exec returned: 1
Total time: 43 seconds
'choice' is not recognized as an internal or external command,
operable program or batch file.
Step MDMCustomerBase Import Seeddata failed
Failed to import Seeddata
Step MDMCustomerBase Import Seeddata failed

SAP notes for error in update of VBEP table

Hi
while iam trying to delete a PO number it does not get deleted.If you could help me in letting me know if i could implememnt SAP notes in this. I receive a message a inbox stating that error in update of table VBEP.

hi
please check is there any schedule line exists for this PO.

How to update schema-base xmltype by dba?error ORA-19007

Hi ,
Connect to db using user 'u1', register schema to LOCAL and update schema-base xmltype success. Then I login in db as dba, update xmltype occus ORA-19007. If I register the schema to GLOBAL, using dba to update xmltype has no problem. But how to update schema-base xmltype who's schema is register as LOCAL by dba?
connect to db using user ‘U1’：
declare
begin
dbms_xmlschema.registerSchema(
'http://www.oradev.com/myschetest.xsd',
'<schema xmlns="http://www.w3.org/2001/XMLSchema"
targetNamespace="http://www.oradev.com/myschetest.xsd"
xmlns:sch="http://www.oradev.com/myschetest.xsd"
version="1.0" elementFormDefault="qualified">
<element name = "Employee">
<complexType>
<sequence>
<element name = "EmployeeId" type = "positiveInteger"/>
<element name = "FirstName" type = "string"/>
<element name = "LastName" type = "string"/>
<element name = "Salary" type = "positiveInteger"/>
</sequence>
</complexType>
</element>
</schema>',TRUE, TRUE, FALSE, FALSE);
end;
SCHEMA register as LOCAL.
create table globtest(id number, content sys.xmltype)XMLTYPE content STORE AS OBJECT RELATIONAL XMLSCHEMA "http://www.oradev.com/myschetest.xsd" ELEMENT "Employee";
It's OK.
insert into globtest values(1, sys.XMLType.createXML('<Employee xmlns="http://www.oradev.com/myschetest.xsd" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.oradev.com/myschetest.xsd http://www.oradev.com/myschetest.xsd"><EmployeeId>1234</EmployeeId><FirstName>Ravi</FirstName><LastName>Murthy</LastName><Salary>100</Salary></Employee>'));
It's OK.
update U1.globtest set content = sys.XMLType.createXML('<Employee xmlns="http://www.oradev.com/myschetest.xsd" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.oradev.com/myschetest.xsd http://www.oradev.com/myschetest.xsd"><EmployeeId>1234</EmployeeId><FirstName>'||unistr('\0080\0081')||unistr('\0085')||'Ravi</FirstName><LastName>Murthy</LastName><Salary>100</Salary></Employee>') where id=1;
It's OK.
but when i login in as dba,
using above update sql. It has probleam.ORA-19007.
How can i using dba to update this LOCAL schema-base xmltype? Thanks a lot.

User 'U1' is created by:
create user u1 identified by u1;
grant dba to u1;
Is there any other privilege need to be grant to u1?

MaxDB error during install SAP NetWeaver 7.0 pack 2

I always get the following error while installing SAP NetWeaver 7.0 including Enhancement
Package 2:
An error occurred while processing option
SAP NetWeaver 7.0 including Enhancement
Package 2 > SAP Application Server ABAP
> MaxDB > Central System
> Central System( Last error reported by
the step :Assertion failed:
com.sap.dbtech.rte.comm.RTEException:
Cannot connect to host localhost:7210
[Connection timed out: connect], -813.).
You can now:
Choose Retry to repeat the current step.
Choose View Log to get more information about the error.
Stop the option and continue with it later.
Log files are written to C:\Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/.

Hi
>
jorisvanmolle wrote:
> Log files are written to C:\Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/.
Post your logs here.
Thanks
Siva

Error on update of document stored in content server

Error on update of document stored in content server
On a regular basis (but not reproducible) we find that after updating a document, it is deleted from content server (or at least it cannot be retrieved). These problems have only been experienced since we switched to using content server as our storage repository, as opposed to R/3.
We create and maintain documents through a bespoke transaction, which calls standard SAP functions BDS_BUSINESSDOCUMENT_CREA_TAB and cl_bds_document_set=>update_with_table.
Whilst the errored documents are listed in the BDS via transaction OAOR (business document navigator), an error is received when you try to display it (in our case an MS-Word error indicating file/pathname invalid).
We are satisfied that file/pathname are valid and find that this occurs occasionally when a document has been updated. It appears that the document has been deleted.
This bespoke transaction has been running successfully for almost two years, and these problems have only been experienced after switching to content server as a storage repository (as opposed to R3 previously). Has anyone else experienced these problems?
We are running :
R/3 Enterprise 620,
SAP HTTP Content Server Version 6.30 Patch 13
SAPDB version 7.3.0.54

Hi Sonny,
To check the connectivity between your content server and Workstation and SAP Server.
Pls goto the command prompt of your workstation
give the command like this example.
C:\>Ping 117.123.45.201
you will get the reply from the server. here 117.123.45.201 is your content server IP.
If you are getting the reply then it means that your contentserver and workstation are connected propely.
Like that pls check the connectivity between your systems.
Pls check the hosts file of your systems also.
If the hosts file entry is not maintained, you can check-out file from content server but you cannot check-in the original.
Pls let me know what kind of error Message you are getting?
From where you are trying to check-in the Original? From the DIR screen or from CAD Desktop screen?
Regards,
MRK
(reward points if useful)

Error when updating Idocs in Source System - Urgent

Hi Team,
When i was loading the data from SAP R/3 to BW, i was facing the error "Error when updating Idocs in Source System" (0 From 0 Records).
When i check in the Environment>Transaction RFC->In the Source System, it was displaying the error--
<b>" Import container contains errors (are any obligato) in the Function Module: IDOC_ERROR_WORKFLOW_START_R".</b>
Can any one please help me to solve this error.
This is am Urgent requirement for me to deliver.
Thanks & Best Regards,
Venkata.

Hello VenkaTa,
How r u ?
The workflow settings are not proper it seems. Ask the BASIS people to correct the Work Flow Settings. Then try Updating the IDOCs manually.
Also check the Inbound and outbound IDOCs in the Source system. The outbound should contain some warnings or errors.
Best Regards....
Sankar Kumar
+91 98403 47141

SAP-Basis system: Transaction canceled 15

Dear Gurus,
We have ECC 6.0 on DB2 9.1 fp 5 on windows 2003.
I am getting this error in syslog.
SAP-Basis system: Transaction canceled 15
Thanks
Rao.

Thanks for reply
This is the log in SM21.
Can you tell me how to do this in sap or database level.
&CAUSE&
When the update data is reorganized, it deletes inconsistent
(incomplete) update requests. While one user is carrying out a
transaction, the the update data is often in a state of incompletion.
When the transaction is completed and the update begun, the data becomes
complete. If the data is reorganized in productive operation, temporary
inconsistencies may get deleted. A data inconsistency with incomplete
data can therefore arise.
&SYSTEM_RESPONSE&
Reorganize the update tables only where there are no users logged onto
the system.
&SYS_ADMIN&
Regards
Rao.

Installing License in Solution Manager 4.0 - SAP BASIS 7.0

Hi, I installed SAP Solution Manager, I request my unlimited license at SAP Marketplace, they send me the file, however in slicense transaction - New licenses I load my file and no errors show me. However when finish load of file, license status is not active (green) but it is red and show me as "Not yet valid". I restart my server and delete temporary license and nothing happend, message is the same. Is important know than licenses in new version (SAP BASIS 7.0) and ECC 6.0, installation is not equal than old version. The file with the key must be imported from slicense transaction - new license and no write directly to slicense transaction fields.
Thanks.

Obviously you have to upgrade SAPKW70012 first as its the prerequisite of Basis support pack. So just import this support pack then you can only continue for Basis patch.
There is a sequence in which patch can be imported, when you apply any patch it shows the prereuisites of that patch so just follow the same.
Regards
Subhash

Stopping user compare when saving composite roles in 4.6c basis pack 25?

One of the environments I look after is a 4.6c system with basis pack 25 they cant upgrade as it breaks a great deal of very heavy customisation in that system.
We have encountered an issue with the saving of composite roles in that system - when a role is saved we must sit through a very long period of user distribution in role XXX while the system performs a user compare of every singular role in that composite role. This is very painful as it can take nearly half an hour simply to save the composite role we then need to rebuild the menu and compress it (we use the composite roles menu structure). The odd thing is that this behaviour wasnt apparent for many years it suddenly started happening about 2-3 years ago to a previous administrator but he wasnt aware of any changes going through, it just began to force these lengthy compares on him when saving composites.
Ive tried in vain to disable this forced compare on every save Ive tried the PRGN_CUST modifications including adding the lines AUTO_USERCOMPARE with a value of NO and USRCOMPARE_PFUD with a value of YES to try and stop the profile generator from doing this but to no avail. Unless these settings need a restart of the system to take effect (do they?) Im at a loss to find any other options.
The menu setting in the profile generator of automatic user master adjustment when saving role is switched off though setting auto_usercompare seems to have broken the ability to bring up the settings: role maintenance dialogue box anyway.
We have a very large number of roles to modify and would be grateful if anyone could offer any advice here.
Thanks
DT

the problem with your issue is that none of use can reproduce that phenomenon, since none of use has that combination of primal release/support package level at hand any longer (at least i think so). so there's only two options left to you:
first: update this special application until the problem goes away - do so by adding note after note on the very subject, like the one i mentioned plus [905924|https://websmp130.sap-ag.de/sap(bD1kZSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=905924&nlang=EN&smpsrv=https%3a%2f%2fwebsmp107%2esap-ag%2ede] plus [662484|https://websmp130.sap-ag.de/sap(bD1kZSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=662484&nlang=EN&smpsrv=https%3a%2f%2fwebsmp107%2esap-ag%2ede] and stop only when you hit one that is not implementable using SNOTE but only by implementing a support-package -> this will obviously be the point where you're stuck then.
(and yes - for the sake of rob burbank: there are several other ways to implement corrections aside from SNOTE).
second: open a call with SAP. mind you, this might become a lenghty one since they will also give you note after note ...
as i said, i'm pretty sure no one in here can help you doing a proper analysis anymore (but maybe i'm wrong).
anyone - any other (better) suggestions?

Error in updating SAP Basis Pack

Similar Messages

Maybe you are looking for