Error in updation on rg1 register

Hi
I created a excise invoice for factory sale. While updating the register
J1I5 Update the RG 1 and Part I registers
it is not simulating. Why is there any customization setting i have to do or what?
kindly help in this matter
regards
chakri

In the case if updation is for first time:
RG1 Updation
The sequence is like this:
1. In SE16, enter Table name: J_2IRG1BAL, and click on Create. Enter the material Number and 'P' in Material form (Loose/Pack indicator) and click 'Save'. This step is to be done only for the first time.
2. Do your Initial Stock entry in MB1C, movement type 561
2. Go to J1I5, select Posting Date, Document Year and 'ROP in Classification (Receipt from outside under any other provision). Click on Create icon (Register entry)
4. Go to J2I5 and extract the RG1 Register. You must get a green checkmark.
5. After doing the PFI, go to J1I5, select Posting Date, Document Year and Classification 'IDH' (For domestic sales) or 'IDE' if the first removal is for Export Sale. Based on the accounting document generated during PGI (MB03) the RG1 Register gets updated with the removal for Outbound Delivery.
6. Reextract the RG1 register in J2I5. You must get a green checkmark.For the RG1 Register printout, go to J2I6, select the option, 'Script Form' and hit 'Execute.
All this was in OSS Note: 373001.
Regards,
Rajesh Banka

Similar Messages

  • CIN: Items are not displayed while updating the RG1 Register using T Code:

    Hi Experts,
    Items are not displayed while updating the RG1 Register using T Code: J1I5.
    System is not showing any error message.
    Can any one explain to update the RG1 Register?
    Thanks
    Chandra

    Hi,
    dont go the table again and again . the table is updated at intial stage only for stock update but not when SAP is running.
    In day to day bussiness the flow is as follows:
    Production - MB31 - to Unres stock
    Sales - VL02n - PGI - to customer - i.e out of unres stock
    Every day u can run TC J1i5 once in a day as decided and update the register so all transactions which have happend in that day gets updated i.e both input and output.
    and this will happen every day.
    hence dont use table as it is only for intial data upload i.e just before golive.
    Hope i am clear.
    krishna

  • Updation of RG1 register

    Hi,
    Once again I am putting this question.
    When I am trying to update the RG1 register with t.code J1I5,At the time of simulation,I am not able to simulate the some material document (getting the red tab against them).So that I am not able to update the RG1 register.
    What can be the possible resons that some document not simulating.
    I have maintained the J1iD after Creation of excise invoice.
    Urgent

    hi,
    this is because there is not enuf bal against the material, try by posintg some inward goods movement thru a PO or a manual JV in j1ih. then ur issue will be resolved.
    saurabh

  • Updation of RG1 register for make-to-stock material

    Dear Experts,
    Will you please guide me how to update the RG1 register in case of sales for make-to-stock materials?
    With regards,
    Jhelum Roy

    Read SAP help documentation [Update of Registers RG 1 and RG 23 (Part I)|http://help.sap.com/saphelp_erp60_sp/helpdata/en/09/ebf138cdd78a4be10000000a114084/frameset.htm]

  • Updating the RG1 register.

    Hi..Gurus,
    Iam updating the RG1 register like this. In my company we create sales order. After that the PP people do the Sales order to process order and put the stock into the unrestricted stock.
    Then we do delivery and billing and excise invoice.
    After creation of the excise invoice iam using the J1ID here in the Chapter Id and Material combination iam putting the material as RG1.after that iam using the T.code SE16 and in the table j_2irg1bal iam maintaing the some quantity in total receipts+issues field.
    After that iam doing RG1 updation ,Extraction.
    My question is is my process is correct or not? if we follow the process any problems come in the future.
    Gurus please correct me.
    regards,
    jyothi.

    Hi,
    dont go the table again and again . the table is updated at intial stage only for stock update but not when SAP is running.
    In day to day bussiness the flow is as follows:
    Production - MB31 - to Unres stock
    Sales - VL02n - PGI - to customer - i.e out of unres stock
    Every day u can run TC J1i5 once in a day as decided and update the register so all transactions which have happend in that day gets updated i.e both input and output.
    and this will happen every day.
    hence dont use table as it is only for intial data upload i.e just before golive.
    Hope i am clear.
    krishna

  • Maintain/update in RG1 register

    Dear  Guru,
    If  the finished good return from customer to business then,how to maintain/update in RG1 register.
    Regards,
    Kumar

    Hi Kumar,
    The RG1  Register is the daily stock account register of finished goods and if the finished goods return from customer to business then that finished good is considered as input material and RG23A or RG23 C register will get update.
    As i case of return from customer we have to do PGR(post goods receipt) with movement type 655 and J1IH manual excise adjustment.
    Regards
    Gaurav M

  • Updation of rg1 register twice on 641 mov type

    Hi,
    We have a scenerio, where finished product will be consumed for assembling the another product,
    for this the scenerio is STO to own plant through Sales,
    When I am updating RG1 register through J1I5 transaction with mov type 641 against STO to own plant
    RG1 entry is updating twice, one as receipt in the plant and once as Issue from the plant with value.
    Pls. provide the solution how to control this to enter only once.
    regards
    Ramesh

    Possible options to get RG1 updated twice in case of STO-
    - Check whether you are using "One step procedure" in STO
    - Check movement types assigned to RG1 in CIN Settings ( i guess, 641/101 movement types assigned to RG1)
    - Should not maintian 101 assigned to RG1- bcoz inflow of Materials will not update RG1,
    try n revert

  • Incorrect Opening stock & closing stock updation in RG1 Register

    Hi ,
    It's regarding Rg1 register update. As our cut-over date was 31.08.2010.
    After extracting  for the month of sept. , when no opening and closing stock
    reflecting in it, than we realize it .Afterwards we maintain
    the  closing balance for 31.08.2010 in the table and try to
    re-extract it,but there is no change in the sept.figure.After extracing for
    October month,we get the values in the column ofopening stock and
    closing  stock in RG1 register. But for some material it is showing
    negative stock and for some as Zero, though physically it is present.
    What i  found in Rgsum table that the stock quantity are not correct,
    it seems that september stocks are not updated in the table also in
    J_2irg1bal table ,only october stock are reflecting.
    looking forward for your valuable inputs.

    Hi,
    All the Receipts And issues have been updated in J1I5 for september month.What i also found that in table for
    RG23 summary of receipt and issue , the quantities has been updated for the particular month also in RG1
    Excise details table all the entry are there for september month.The only problem is on Opening and Closing
    balance table for Rg1. here in this , there is no entry for September month,but for october it is there.
    How to correct this.
    Regards
    sujeet

  • Updation of RG1 register.....J1I5

    Dear Friends,
    I need to update RG1 register.....J1I5
    1. How should I start with.....Do I need to update first with classification RMA /ROP?
    2. What's the relevance of other classifications like IDH/IDE/IWE/IWT/IWO?
    Cheers

    Hi,
    In case you have updated your removal entries using any particular classification type, whether its IDH/IWE or any other one...there is no way that you can rectify it. Entries in RG1 tables can happen only once and without any option for modification, that is the reason that simulation option has been given for excise register entries.
    You can continue with these entries as the total removal qty of stock, opening stock, closing stock and the respective excise duty amount will match correctly. Going forward you need to be careful when doing register entry.
    Rgds,
    Antima

  • SECess is not getting updated in RG1 register

    Dear  All,
    I have applied the Note 1034308 ( Budget 2007 - 08 changes for J1I5 ) but the sec cess  entries are not getting populated in the RG1 register.
    which are the settings are required to be completed.
    kindly guide.
    Deepak

    Check out some corrections are missing or check with abaper that he added the field in the program and u need to  to check the settings in the excise group of that plants
    Reward points helpful
    Regards
    Sriram

  • RG1 Register Updated Error

    Dear All,
    I have select Movement Type is 601 and Classification  is IWO and select the RG1 option.
    Next i go select the view list of items and simulate the list. All the items are marked in red color. I do not know.
    Please kindly to give the clear process for RG1 .
    Thanks
    Saro

    Just wanted to know, 1)whether you are using this functionality for the first time or
                                        2)it was updating the RG1 register earlier but it is not updating now.
    If your answer is 1), .......
                                             A) You need to maintain the necessary settings related to movement types relevant for updating RG1 register
                                             B) Check that whether RG1 balance is uploaded RG1 opening balance table
                                             C) You need to update the RG1 inward entries before updating the outward entries
                                             D) Check whether classification IWO is relevant for RG1 updation or not
    If your answer is 2), .......
                                            A) Check the RG1 balance
                                            B) Check all movement types associated with inward entries relevant for RG1 are maintained in customizing
                                           C) Check classification IWO is relevant for RG1
    Let me know if it resolves your issue

  • RG1 Register updation , one material document is showing in red traffic

    Hi Friends,
    When updating the RG1 Register one materail document with 601 movement type and classification IDH is showing in red trafic light. How to correct this error?
    Actually this material having stock in the plant and that material document posted properly also.
    Please help me frineds?
    Regards
    Satya

    Hi Shekar,
    Actually I have selected first Classification as RMA , i hope this process may update the RG23A.I got all the data properly at simulation and i have taken all those values into register.
    Next step , I selected the classification as IDH and rying to update the RG1 register. Here for some line items (Material documents ) are showing in Red Traffic light at the time os Simulation.
    All ther master data like chapter ID Maintaince and Cenvat determination is maintained properly.
    Regards
    Satya

  • Updation of Excise Base Value in RG1 Register

    Dear All,
    I have maintained the Condition category as H in Condition Type. But still the Excise Base value is not getting updated in RG1 Register.
    Please help me out with the solution.
    Thanks
    Tanushree

    Hi Tanushree,
    R u working in Ecc 6.0 or in ZYG?
    To update the Excise Base value is in RG1 Register,wat u nid to do is assing Condition category as H.
    Thanks
    Kapil

  • RG1 register register updation prob for some of the deivery docs.

    Dear All,
    While updating the RG1 register for classification type IDH,
    on simulation system is giving red signal  for some of the documents.
    Can any one pur some light on this issue.And guide me what i have to do?
    I like knwo for which movement type which  classification we have to used.
    The issue issue is very urgent as we have to submit the register with the excise department.
    Thanks in advance.
    deepti

    Hi shyam,
    Did you got the answer for your question if so please tell me the solution since i am also facing same problem.
    thanks
    Srinivas

  • RG1 Register Updation Problem-

    Hello,
    we are having two plants, both are manufaturing plants. having same excise group and Excise registration number.  Actualyy both the plants are situated at same place. M001 is linked to M001 company code and M002 plant linked to M002 Company code.
    M001 plant Receive the Finished good from Shop floor via Production oder and Rg1 register updated through J1I5 t code.
    Now Business wants to do Stock transfer for moving of FG material to M002 plants for sale from M001 plant. Every material will sales from M002 plant. Business is making STO from M001 to M002 Without excise .
    How to Update RG1 Register in M002 plant. Received entries updated in M001 company code RG1 Register and but sale from M002 plant how to update Rg1 register.
    Regards
    Mahesh

    Hello
    301 movement type is assigned to RG1 register and
    Material and Chapter ID  and material Type "RG1" mainatined in J1ID....
    We have transffered the material from M001 company code to 9001 through MB1B with movement type 301.
    system is not showing any documents here for updation of RG1 register through J1I5.. here clssification selected is "RMA" receipt from Manufature"
    Mahesh

Maybe you are looking for