Error in uploading data from FIAP ODS to FIAP CUBE

We are trying to upload data from FIAP line item ODS to FIAP CUBE. However it is showing zero records updated for a long time. We tried deleting and repeating the same but again it is showing zero records only. The monitor status is yellow.
Following message is coming on the screen.
Missing message: Number of sent records
Regards
Renu Gurumurthy

Hi Renu,
Find the below search link which helps u lot...
https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=missingmessage%3ANumberofsent+records&adv=false&sortby=cm_rnd_rankvalue

Similar Messages

DB Connect Load - "Unknow error while uploading data from the DB Table"

Hi Experts,
We have our BI7 system connected to Oracle DB based third party tool. The loads are performing quite well in DEV environment.
I would like to know, how we transport DB Connect datasources to Quality systems? Any different process to be followed for DB Connect datasources?
At present the connections between BI Quality and the third party quality systems are established. We transported the DataSource from BI DEV system to BI quality system, but on trigerring an infopackage we are not able to perform loads. It prompts - "Unknow error while uploading data from the DB Table".
Also on comparing the DataSources in DEV system and Quality system there are no fields in "Proposal" tab of datasource in Quality system. Also I cannot change or activate Datasource in Quality system as we dont have change access in quality.
Please advice.
Thanks,
Abhijit

Hi,
Sorry for bumping an old thread ....
Did this issue get ever get resolved?
I am facing the same one. The loads work successfully in Dev. The transport for DBConnect DS also moved in successfully.
One strange this is that DB User for dev did not automatically change to db user from quality when I transported the DBConnect datasource. DBCon DS still shows me the DB User from Dev in Quality system
I get "Unknown Error" whenever I trigger the data package.
Advait

Unable to load data from an ODS to a Cube

Hi all,
I am traying to load data from an ODS to a cube, and I'm getting the following msg at the bottom of the screen monitor: <b>"No corresponding requests were found for request REQU_BZUH9ZPYNL5XLQNB7K8IQDKFS in the ODS/Cube" Message no. RSBM043.</b>
I am unable to load the data. The QM status is yellow. When the process starts, on the left hand of the monitor it shows: "0 of 84408 records" which is ok. I load that with this package before and it works well.
Can you help me what I have to do? I tried to wait but it was the same: no progress and no data in the cube.
Thank you very much and kind regards,
MM.
May be this helps...
When I look at the status, it says that I have a short dump at BW. It was CALL_FUNCTION_REMOTE_ERROR and the short text is "The function module "SUBST_TRANSFER_UPGEVAL" cannot be used for 'remote'". This short dump occurs very much before I shoot the upload.
Thanks again.

Hello MM,
Can you do the following..
make the Total status Red Delete the request from cube.
goto ODS -> Remove the Data Mart Status -> Try loading it again.
The error message that you get is common when we are trying to run a infopackage with the source object having no new request, (means all the requests available in the source are already moved to the targets). So please try the steps given above.
Hope it will help!

Error while uploading data from a flat file to the hierarchy

Hi guys,
after i upload data from a flat file to the hierarchy, i get a error message "Please select a valid info object" am loading data using PSA, having activated all external chars still get the problem..some help on this please..
regards
Sri

there is o relation of infoobject name in flat file and infoobjet name at BW side.
please check with the object in the BW and their lengths and type of the object and check your flat file weather u have the same type there,
now check the sequence of the objects in the transfer rules and activate them.
there u go.

Error while loading data from one ODS to anther ODS

Hi all,
while loading the data from one ODS to another ODS, we are getting error message - Error: No match found in target. No Space on ODS.
I have done a runstat on these tables of the ODS.. but the issue repeated.
Can anyone tell how do we solve this issue.

Check if you get any other Dump message in ST22 to see if it is due to some space availability in the DSO or underlying tables.
Or Post in detail if any other errore message is available.

Error in uploading data from DSO to Infocube in 3.5(rsa1old)

While uploading data from DSO to Infocube, I selected Initial update option
In schedule tab when I clicked start, an error occured it says:
Delete init request
REQU_D4YTAGX8PEOUQJLSKOEPH9EV before running
init. again with same selection.
Can anyone let me know how should I delete that request.
Thanks,
Soujanya.

Hi,
Go to RSRQ and enter the request then execute. This should bring you to Monitor u2013 Administration Workbench. From there you will see the InfoSource (usually has u201C8u201D as a prefix). Get the InfoSource name. Go to RSA1 to find the InfoSource. From here it gets a bit tricky. Go to the datasource and drill down to the related InfoPackage. Go to Infopackage scheduling. Then go to Scheduler Menu, the Initialization Options for Source System should be open. You can see from there the request with error. Let me know if this answers your question.
Regards,
JD Datuin

How to upload the data from existing ods to new cube?

Hi all,
There is an existing ods and reports are been created for that ods. My task is to create a cube and pull out the data from the ods to cube.
I have created a cube with update rule. And i want to know to how to load all the data from the existing ods to the newly created cube.
thanxs
haritha

Hi haritha,
If you've already created the update-rules, try to create cube, than make a mapping between ODS & Cube.
If done,
1. Right-Click on ODS, find the menu update data to data target.
2. Choose for Init.
If you wanna make it update data to cube automatically, then you must setup the setting in ODS.
1. double-click on it.
2. In setting, you'll see the option for "automatically update data to data target".
3. Choose for it.
Hopefully it can help you a lot.
Regards,
Niel.
thanks for any points you choose to assign.

Error while uploading data from ODS to Cube

Hi All,
Will you please help out this issue.As this is a priority high issue,please reply if you know the answers.
I am facing an error while loading the data from ODS to CUBE,the error
is
<b>1.Name is not in the namespace for generated BW Metaobjects
2.Error 18 in the update</b>
And this error is occuring only in quality server.
Thanks,
Ram.

HI RAM SIVA,
make sure that the Data source is replicated and tranfer rules r active.
And also check whether the all transport requests r imported properly.
hope it helps
bhaskar

Error while uploading data from a flat file

Hi All,
I am trying to load data from a flat file to an ODS. The flat file contains a field, say FLAT01, of numerical type(Type Decimal, Length 18, Decimals 2). I have created an infoobject, say ZIO10, with type CURR and currency field, 0CURRENCY. In the transfer rules, I have assigned a constant for 0CURRENCY as the flat file doesn't have any currecy field.
The problem is the flat file doesn't have any value in that field, FLAT01, for some records, infact most of the records. When I try to load it to BW,from applicatin server, it is throwing an error "Contents from field ZIO10 cannot be converted in type CURR ->longtext".
I have debugged the transfer rules and find that the empty value is being represented as '#' and when it is trying to copy it into the CURR type field, it is throwing the error.
Can someone please let me know how to solve it? why is it taking '#' for enpty value? Can't we change that?
Any help would be highly appreciated.
Best Regards,
James.
Message was edited by:
James Helsinki

Hi SS,
I am sorry that I was not clear with my explanation. I have created ZIO10 as a keyfigure with type AMOUNT and the currency as 0CURRENCY.
There is no currency coming in from the flat file so I used a constant in transfer rules to fill 0CURRENCY.
The field which is coming as '#' is FLAT01 which is assigned to ZIO10.
Best Regards,
James.

Error when uploading data from Flat file

I am uplading data from Flat file.
When I am uploading it gives an error
An error occurred in record 1 during execution of conversion exit CONVERSION_EXIT_CUNIT_INPUT for field UNIT.
Can any one help.
Thanx in Advance.
Regards,
Pradeep.

Hi Pradeep,
Refer this link:
CONVERSION_EXIT_CUNIT_INPUT error in flat file load
Re: Error in Flat files upload
Also try this - In the transfer structure check the checkbox fo UNIT and retry the load. Hopefully it should be fine.
Bye
Dinesh

ERROR while uploading data from EXCEl to sap using ALSM_EXCEL FUNCION MODULE

Hi Experts,
I am uploading excel data into sap suing function module ALSM_EXCEl_TO_INTERNAL_TABLE , used this funcion module in the program while running the program one blank excel sheet is opening and data is not uploading into internal table . even same blank sheet is opeining if we user
CONVERT_EXCEL_TO_INTERNAL function module also.
can you please tell me why this error is coming how to over come this error.
My excel sheet data records are less then 10000.
Thanks & regards
kiran

Hi Taranam,
Use FM ALSM_EXCEL_TO_INTERNAL_TABLE.
Regards,
Atish

Reg : Error While uploading Datas from EXCEL in to SAP

Hi Experts,
Please help me with code inorder to upload EXCEL File DATA in to SAP.... I tried with FM : ALSM_EXCEL_TO_INTERNAL_TABLE & TEXT_CONVERT_XLS_TO_SAP but exception raised like UPLOAD_OLE for me..
Wat to do...?
Please help with exact data (EXCEL) and code...
regards
e arthi

Hi arthi
save you file as CSV file in excel.
that means your file will be coma separated,
and then use fm
GUI_UPLOAD.
This will solve your problem.
Regards,
Vijay

Error in Source System While Uploading Data from ODS to Data Target

Hi All,
Iam getting Following Error while Uploading data from ODS to Data Target
a) Error in Source System.
b)DataSource 80MKT_DS01 has to be replicated (time stamp, see long text)
Message no. R3016
Diagnosis
DataSource 80MKT_DS01 does not have the status of the source system in the Business Information Warehouse.
The time stamp in the source system is 21.06.2005 07:31:33.
The time stamp in the BW system is 27.11.2004 17:41:45.
Regards,
Chakri

This generally occurs when you change the data source or enhance the data source or the coonections to the datasoiurse are broken. To resdolve thius sort of errors just
1. Check for the coonect between the sourse & target systems
2 . Replicate the data sourcses.
3. Acivated TR,UR,& the rest of the flow But check in the source system if the structre is modified & is so do the changes in the IS , TR,UR correspondingly & the try to load .Hoppe it allows you to load .
Thanks ,
PSG

Load from 3 ODS to 1 cube

Hello All,
Our requirement is to load the cube from 3 ODSs. Each time we are loading the data from the 3 ODS to Cube the load gets failed due to job getting terminated in the source system.
POP UP for the ERROR:
Express document generated error in data selection Check load from Author.
ERROR TERMINATED:
Job in source system terminated --> Request is set to red.
Message no. RSM078
We think There is Some problem in the data selection from the ODS.
Please suggest us some solution for this.OR a check list for loading the data from 3 ODS to a cube.
Thanks & Regards,
Pallavi.

Check SAP Note: 869445.
Check this:
Job terminated in source system --> Request set to red
Load data into InfoCube 0FIGL_C10
Thanks

Error while updating data from PSA to ODS

Hi Sap Gurus,
I am facing the error while updating data from PSA to ODS in BI 7.0
The exact error message is:
The argument 'TBD' cannot be interpreted as a number
The error was triggered at the following point in the program:
GP44QSI5RV9ZA5X0NX0YMTP1FRJ 5212
Please suggest how to proceed on this issue.
Points will be awarded.

Hi ,
Try to simulate the process.That can give you exact error location.
It seems like while updating few records may be no in the format of the field in which it is updated.
Regards
Rahul Bindroo

Error in uploading data from FIAP ODS to FIAP CUBE

Similar Messages

Maybe you are looking for