Error in uploading data

Hi Experts,
While im using BAPI_CUSTOMER_CREATEFROMDATA1 for XD01. It is throwing error account group is not defined.
In BAPI_CUSTOMER_CREATEFROMDATA1, structures used for import r export r tables, i didnt find any account group field.
But there s field for reconiliation accoun(AKONT),but it is different. I need field of type KTOKK.
Need ur help to suggestion to solve this issue..
Thanks and Regards,
Bharat

Hi Bharat,
Here 's an extract from WIKI on BAPI_CUSTOMER_CREATEFROMDATA1
Using the BAPI BAPI_CUSTOMER_CREATEFROMDATA1 is not recommended because this BAPI doesn't support a lot of fields that are needed to create valid customer master data.
The best way to create a new customer is to use batch input. You can use the transaction recorder located in the installation directory to create a template and then use this template for your own code as described in the manual.
for more info refer this link :
http://www.theobald-software.com/wiki/Create_New_Customers

Similar Messages

DB Connect Load - "Unknow error while uploading data from the DB Table"

Hi Experts,
We have our BI7 system connected to Oracle DB based third party tool. The loads are performing quite well in DEV environment.
I would like to know, how we transport DB Connect datasources to Quality systems? Any different process to be followed for DB Connect datasources?
At present the connections between BI Quality and the third party quality systems are established. We transported the DataSource from BI DEV system to BI quality system, but on trigerring an infopackage we are not able to perform loads. It prompts - "Unknow error while uploading data from the DB Table".
Also on comparing the DataSources in DEV system and Quality system there are no fields in "Proposal" tab of datasource in Quality system. Also I cannot change or activate Datasource in Quality system as we dont have change access in quality.
Please advice.
Thanks,
Abhijit

Hi,
Sorry for bumping an old thread ....
Did this issue get ever get resolved?
I am facing the same one. The loads work successfully in Dev. The transport for DBConnect DS also moved in successfully.
One strange this is that DB User for dev did not automatically change to db user from quality when I transported the DBConnect datasource. DBCon DS still shows me the DB User from Dev in Quality system
I get "Unknown Error" whenever I trigger the data package.
Advait

Can anyone list problems/errors when uploading data using BDC's and BAPI's?

Can anyone list the problems/errors when uploading data using BDC's and BAPI's?

Hi,
If you are actually creating a BDC to load data pls be more specific.
Data format incorrect. Tab delimited/ etc
Dates in wrong formats
Currency incorrect formats
Missing screens
Wrong transaction code
File not found,
Missing Mandatory fields,
Screen resoultion.
You should always use refresh for your Bdcdata table.
Loop at internal table.
refresh Bdcdata.
regards,
sowjanya.

Error while uploading data from a flat file to the hierarchy

Hi guys,
after i upload data from a flat file to the hierarchy, i get a error message "Please select a valid info object" am loading data using PSA, having activated all external chars still get the problem..some help on this please..
regards
Sri

there is o relation of infoobject name in flat file and infoobjet name at BW side.
please check with the object in the BW and their lengths and type of the object and check your flat file weather u have the same type there,
now check the sequence of the objects in the transfer rules and activate them.
there u go.

Runtime Error while uploading data using a BAPI

Hi ALL,
    I am trying to upload duties for PO items using BAPI from a excel sheet.In this BAPI I am saving the data into a z table(Customizing table, maintenance only by cust., not SAP import).The data is getting saved into the table and it shows the data uploaded successfully message also,but when I scroll up I see RUN time error,althogh the data is getting saved.
        I have seen in the st22 and it shows the following information.
Internal error: Invalid page number.
What happened?
The current ABAP program had to be terminated because the
ABAP processor detected an internal system error.
The current ABAP program "ZFI_UPD_BOE_UPLOAD" had to be terminated because the
ABAP
processor discovered an invalid system state.
    My functional consultants opinion is after data getting saved it comes into me23n's condition tab.He has done it many times.But for one PO it is not showing.
    I checked the upload program.In upload program a BAPI is written which simply takes the data from a excelsheet and saves into the z table.
My query is whether we can show the data of a z table into standard tocde?

Thanks Lakshman!
           I debug the program.There is no BDC used update.In this program after taking the data from excel sheet one internal table is prepared and this internal table is directly used to insert data into z table.This is the last code which executes.
INSERT zmmpoamend FROM TABLE t_zmmpo_amend_tab.
IF sy-subrc EQ '0'.
    MESSAGE 'Data Upload Successfully completed' TYPE 'S'.
ELSE.
    ROLLBACK WORK.
    MESSAGE 'Data Upload failed ' TYPE 'E'.
ENDIF.
CLEAR t_zmmpo_amend_tab.
REFRESH t_zmmpo_amend_tab.
     Is it possible to configure z table using SPRO tcode,such that this z tables data will go to standard table and then we can see it in the standard tcode?
I am not sure but it's just a guess.

Error while uploading data in LT03?

Dear All,
I am uploading data in LT03 transaction and I am getting an error message 'System cannot find source storage bin'.
I am using BAPI 'L_TO_CREATE_DN'.
Even same error I am getting in recording.
This is happened in the case of Partial delivery not for full delivery.
Thanks and Regards
Steve

Hi,
Search SCN before posting a query...
System cannot find source storage bin
Regards
Praveen

Error while uploading data!!its urgent

Hi,
this is vijay
when iam uploading data(transactional data)through flatfile iam getting the error like
error in abap program it could not be executed
cx_sy_conversion_no_ number
the data is not loading into psa also
iam doing in developmentside.
i have download the data from production and uploading into development.
can any one explain and give some suggestions

Hi Vijay,
Check the Flat file structure is same as that of transfer structure!
Also in the transfer rule if u scroll right u will find a column Conversion and it will show you check box!
Enable the check box , activate the info source again and load the data !
Regards
Ram

Error while uploading data in SAP (me01)using LSMW

Hi All,
I am using LSMW for the first time.
I am trying to upload data to the Source List transaction (me01) using batch input recording. I created a new recording through LSMW itself. My source structure consists of 5 fields:
<b>MATNR C(18)
WERKS C(4)
VDATU N(8)
BDATU N(8)
LIFNR C(10)
EKORG C(10)</b>
Now the problem is when i try to convert the data, it gives me an error saying
"For type "C",a maximum length specification of 65535 is allowed."
I have noticed that unlike Direct Input method,
using batch input does not give any fields in "Maintain Field Mapping & Conversion Rules". So even if I have my fields in my source structure ,there are no fields to which I can map them to.
I don't know that is how it is when we go with batch input.
My file contain data in following order:
DANGEROUS GOODS,ABBY,20060801,20060831,30010,TEST
Pls help me to solve this problem.

Hi Swapna!
You get such an error message, when define a constant and forget the second ':
g_werks = '1000. "wrong
g_werks = '1000'. "correct
In general: a batch input recording can have fixed values and some variables. You need to define, which fields you like to fill with a variable. Go to the overview of the recordings, open the recording in change mode and assign some variable names to the according batch lines.
<a href="http://help.sap.com/saphelp_erp2005vp/helpdata/en/76/a05b69e8a411d1b400006094b944c8/frameset.htm">Editing batch input recordings</a>
Follow the help for the following steps of structure assignments.
Regards,
Christian

Error while uploading data to ztable from excel file

Hi,
I have a requirement where i have to upload data from excel file to ztable.I have used the fm 'ALSM_EXCEL_TO_INTERNAL_TABLE' for reading the excel file.After reading the excel file i have used INSERT zrb_hdr from table t_zrb_hdr for updating the ztable with data .
here it is giving error as the data base table zrb_hdr and the internal table t_zrb_hdr should be declared of same type .
I got this error b'coz i have changed the date and time fields in t_zrb_hdr table to char type.so the structure of zrb_hdr and t_zrb_hdr are not same.If i don't change the date and time fields,in the o/p i am not getting proper date and time formats.
now how can i upload data into ztable?

Hi,
Try this.
Data: itab type standard table of ztable,
         wa_itab type ztable.
loop at t_zrb_hdr into wa_t_zrb_hdr.
   wa_itab-date = wa_t_zrb_hdr-date.
   wa_itab-time = wa_t_zrb_hdr-time.
   like move all the fiedl to wa_itab...........
   append itab with wa_itab.
Endloop.
now insert the records from itab to the database table ztable.
Thanks,
Muthu.

Error in uploading data from DSO to Infocube in 3.5(rsa1old)

While uploading data from DSO to Infocube, I selected Initial update option
In schedule tab when I clicked start, an error occured it says:
Delete init request
REQU_D4YTAGX8PEOUQJLSKOEPH9EV before running
init. again with same selection.
Can anyone let me know how should I delete that request.
Thanks,
Soujanya.

Hi,
Go to RSRQ and enter the request then execute. This should bring you to Monitor u2013 Administration Workbench. From there you will see the InfoSource (usually has u201C8u201D as a prefix). Get the InfoSource name. Go to RSA1 to find the InfoSource. From here it gets a bit tricky. Go to the datasource and drill down to the related InfoPackage. Go to Infopackage scheduling. Then go to Scheduler Menu, the Initialization Options for Source System should be open. You can see from there the request with error. Let me know if this answers your question.
Regards,
JD Datuin

Error while uploading data into cube

I am trying to upload data into my content cube but I got an error it says"
"Time conversion from 0CALDAY to 0FISCPER (fiscal year S1 ) failed with value 20040303"
I checked the data in the PSA it's there but the first record is not green light it has red light. Could you please give me some idea how to solve this problems.
Thank you in advance
sajita

If you don't know if you want to take over all settings (especially exchange rates may be critical) the problem is probably found in the fiscal year variant. So if you just take over the fiscal year variants.
If the problem remains you could check the following things:
In SPRO -> Global Settings -> Fiscal Year Variants (or similar) check:
Does a fiscal year variant S1 exist?
Is it time dependent? If yes, is it valid for Mar 3rd 2004?
If it is a self defined variant check if there is a period defined for March 3rd 2004.
Best regards
Dirk

Data upload error during uploading data in catalogs ( CCM 2.0 )

Hi ,
I am having problem during upload of data into catalogs of CCM 2.0. I think there is some problem with my file. When i click "Upload Schema" it just upload schema not the data. But if i am removing schema from file it is giving me error.
Kindly if anyone can send me sample file for data upload in CCM 2.0 or steps to upload data correctly.
Thanks & Regards,
Kamal

Hi,
I don't understand very well, the standard characteristic for images is /CCM/PICTURE.
It's a complex characteristic composed by
/CCM/DESCRIPTION
/CCM/URL
/CCM/MIME_TYPE. (for example image/jpeg).
If your problems still exist, you can send me your file
Regards

Error when uploading data.

hi guys,
when uploading data using customer datasource 2lis_01_s001..
i got the following error.
<b>Update ( 0 new / 0 changed ) : Errors occurred
Data records for package 1 selected in PSA - 1 error(s)
Record 1 :No SID found for value 'ST ' of characteristic 0BASE_UOM</b>
tel me what can be the error...how to solve it..
got the data in PSA.
thanks ,
kevin..
Message was edited by:
kevin peterson

Hi
Go to SE38 use program RS_TRANSTRU_ACTIVATE_ALL.
fill the necessary details required like Infousource and source system name.
after filling in all the details press execute.
Now after this is successful go to DS and replicate it and try loading data once again now after deletion of prev unsuccessful req
hope it helps
thanks
puneet

Function Module Error In Uploading Data for Basic Pay Infotype

Hi All,
I'm trying to upload data into Basic Pay Infotype 0008 Using LSMW Subtype 0(Basic Contract). While we are trying to input values into ANSAL(Annual Salary) field directly using default wage type as 1000.
We are gettting a error in function module RP_ANSAL_FROM_WAGETYPES.
and eventhough we are inputting values into ANSAL field it is taking it as 0.00 by default .
Kidly suggest me solution.
Thanks,
Vasanth

Hi ..
check this
765785
673372
730976
note 1032950
http://help.sap.com/saphelp_nw2004s/helpdata/en/8d/3e4ec2462a11d189000000e8323d3a/content.htm
Message was edited by:
hari kv

Getting error while uploading data using the EXCEL( GUI_upload)

Dear Freinds,
I am uploading data from my excel sheet to my Custom table . I am using the below code
call function 'GUI_UPLOAD'
exporting
filename = l_fn
filetype = 'BIN' "'ASC'
has_field_separator = 'X'
tables
data_tab = p_i_ins_db
exceptions
others = 17.
i can see in my internal P_i_ins_db ...all the data is coming in encrypted format.
The flat given to me is the .CSV file .
Could any one please let me know how i can upload the data which is there in .csv file.
regards
syamala

Hi Syamala,
Before using the GUI_UPLOAD to upload the data from the excel file to the internal table,you can try usng the Function Module 'SAP_CONVERT_TO_TEX_FORMAT' or 'SAP_CONVERT_TO_CSV_FORMAT' as it helps n formatting the data.
In case you have any further clarifications,do let me know.
Regards,
Puneet Jhari.

Error while uploading data in table t_499s through BDC Prog

Hi
am facing problem while uploading data in table t_499s through BDC Program , if there is more than 15 records in file its not allowing to upload kindly suggest what to do
Thanx
Mukesh s

Hi,
See if you want to update only single table, which has User maintenance allowed
Use Modify statement.
EX:
LOOP AT ITAB INTO WA_TAB.
    MOVE-CORRESPONDING WA_TAB TO T499S.
    MODIFY T499S.
    CLEAR T499S.
ENDLOOP.
It will update the table, to check go to sm30 , and check in V_T499S.
Rgds
Aeda

Error in uploading data

Similar Messages

Maybe you are looking for