Error in uploading prints

I am consistently running into errors when uploading my prints to Apple. I never used to have this problem, but now I can only load a few pictures before I get this message. It says to check my network connection? Anyone know a quick fix for this? My network connection appears fine in all other regards. I am irritated. iphoto has also begun quitting unexpectedly.

I'm experiencing the same issue using iPhoto 5.0.3 when trying to order prints. Previously, I also had no problems ordering prints.
Basically everything goes as it should for awhile and then at some point in the upload (between 10 - 40 Mb of a 48 Mb set of photos) an error will pop up and tell me there is a connection problem.
If I select "retry", then iPhoto will unexpectedly quit. If I hit cancel, then it stops and iPhoto goes on working okay.
Seems like TWO problems, one with the upload (I suspect with the server these photos are going to) and the second problem is with iPhoto's inability to cope with the first error - causing a crash.
Any insights into how to resolve this issue? I suspect that if I were to only send 5 or 10 photos instead of 20 photos, it might work - but because shipping is so expensive, and there is no way to 'combine' orders - I want to order the whole set of them at once. (20 photos should not be maxing out the capabilities of ordering prints through iPhoto, should it?)
Thanks!
Steve

Similar Messages

  • Error while uploading Template

    Error while uploading Template in Internet Procurement Catalog Administrator responsibility
    I downloaded "Item Price" and i had one item onto spread sheet and tried to upload in above responsibility.
    This is how header level is in the template and line level has item information.
    #ENCODING     Cp1252                                                  
    Language Section*     EN-US                                                  
    Catalog Section     Supplier*      Title                                             
         FEDERAL INDUSTRIES     Test Catalog     
    ***********When i looked into log file i see error message ********************
    [5/20/11 7:58:13 PM] <INFO> Session language altered to AMERICAN
    [5/20/11 7:58:13 PM] <INFO> Session territory altered to AMERICA
    [5/20/11 7:58:13 PM] <INFO> ********** Loader started **********
    [5/20/11 9:35:08 AM] <ERROR> USR:MSG:POM_CAT_MISS_LANG_SEC
    [5/20/11 9:35:08 AM] <ERROR> -> Missing Language Section.
    [5/20/11 9:35:08 AM] <INFO> *********************
    [5/20/11 9:35:08 AM] <ERROR> Failure Message is ::
    [5/20/11 9:35:08 AM] <ERROR> USR:MSG:POM_CAT_MISS_LANG_SEC
    [5/20/11 9:35:08 AM] <INFO> *********************
    [5/20/11 9:35:08 AM] <INFO> Job failed
    [5/20/11 9:35:08 AM] <INFO> ********** Loader stopped **********
    I already had language section in the template as shown above, not sure why it is giving error.
    could you please let me know how to troubleshoot
    Edited by: 855902 on May 20, 2011 5:02 PM

    Hi,
    We believe you are getting this error because of some kind of format issue in the flat file which you are loading..
    You can refer below URL:
    http://appswork.blogspot.com/2009/09/catalog-loader.html
    /S.P DASH

  • Error while uploading BITMAP image in SAP through SE78.

    Hello all,
    I am getting below error while uploading image into SAP through SE78.
    'Bitmap file: No color table available (True Color, Bitcount 32)'.
    I have tried searching for solution and got some help from below reply from a thread:
    You may do these options:
    1. Lower the resolution of the image
    2. Lower the file size of the image
    Regards,
    Reymar
    I have got a image size of 6.14 KB and resolution of 72*72 dots per inch.
    Thanks in Advance.
    - Jayant Sahu.

    Hi Daniel,
    First of all, if you dont mind, start a new thread for your question please.
    Anyways, answer to your question is --
    You need to save your picture with lower-most bits BITMAP Type. When you were saving your picture as .bmp, take care you are passing lower-most BITMAP type and not 24-bit as it may be as default.
    This way, your problem would be resolved.
    Thanks.
    Kumar Saurav.

  • Error while uploading a file using ke13 transactoin

    Hi..
    We have the following error when uploading a project plan by cost element excel upload using KE13 transaction...
    There is a z program that calls this ke13 program while uploading. The excel file is split into x files and uploaded..
    THe error is: Quantity Unit HR cannot be converted to & and error occured when generating data for planning processor...
    Any idea if someone face similar situation..
    Any clue would help us..
    Thanks,
    Kanthi.

    Hi,
        Covert quantity to char and upload the data.
    Regards
    Amole

  • Getting a Page Cannot be Displayed error while uploading a Contract Document in SAP E-sourcing for size 500mb

    Hi Guys,
    I am getting a Page can not be displayed error while uploading a COntract Document in SAP-E-soucing 7.0.
    Maximum Size set in Our SYSTEM is :9765MB.
    Approx size of the Document tried is more then 300MB.
    Appreciate your help on this.
    Regards
    Tarun

    Hi Tarun,
    Please check the below system properties using system user login
    attachments.maxSizeKB.buyers - "Maximum size in KB of a employer-attached attachment file"
    attachments.upload.enable.buyers-  " Enable/Disable uploading of attachments by internal users"
    Also Please check with other attachment, contracts related properties in the System.
    Let me know if this helps.
    Thanks,
    Raj.

  • Error while uploading Transport request

    Hi friends,
    Error while uploading transport request to the transport directory,
    we downloaded the trasnport request from one sap system which have a set of developments
    for example downloaded files are;
    control file: K900470.SAD and Data file: R900470.SAD fronm transport directory.
    we are trying to upload the transport to another Sap system
    we have
    Uploaded  the controlling file K900470.sad to the location  /usr/sap/transpad/cofiles/
    Uploaded the controlling file R900470.sad to the location  /usr/sap/transpad/data/
    we tried tro  add in the import queues using  TCODE: STMS
    and trying to import.
    During import we get
    error:
    HALT: unknown dynpro format: d021s_length() returned 0 Please contactthe SAP support.
    End with rc : 16
    Please help me with the problem.
    Thanks in advance
    Deepak

    Hi,
       Check the versions of the two sap systems you are downloading and uploading the transport requests

  • DB Connect Load - "Unknow error while uploading data from the DB Table"

    Hi Experts,
    We have our BI7 system connected to Oracle DB based third party tool. The loads are performing quite well in DEV environment.
    I would like to know, how we transport DB Connect datasources to Quality systems? Any different process to be followed for DB Connect datasources?
    At present the connections between BI Quality and the third party quality systems are established. We transported the DataSource from BI DEV system to BI quality system, but on trigerring an infopackage we are not able to perform loads. It prompts - "Unknow error while uploading data from the DB Table".
    Also on comparing the DataSources in DEV system and Quality system there are no fields in "Proposal" tab of datasource in Quality system. Also I cannot change or activate Datasource in Quality system as we dont have change access in quality.
    Please advice.
    Thanks,
    Abhijit

    Hi,
    Sorry for bumping an old thread ....
    Did this issue get ever get resolved?
    I am facing the same one. The loads work successfully in Dev. The transport for DBConnect DS also moved in successfully.
    One strange this is that DB User for dev did not automatically change to db user from quality when I transported the DBConnect datasource. DBCon DS still shows me the DB User from Dev in Quality system
    I get "Unknown Error" whenever I trigger the data package.
    Advait

  • I cannot print from Websites or my college online course. Tries to save files to desktop as an .xps document but nothing happens and I get an error message that print command did not work. Have reinstalled firefox and adobe, no help. Any suggestions?

    Cannot print anything from internet using Firefox as browser. Please advise. I have to use Firefox for internet college courses, cannot print my assignments. I do not have this problem on Mac or using Internet Explorer. Only happens when using Firefox. When I select print a message comes up to save information to desktop as .xps file. Select save, sometimes it is on the desktop but I cannot open the file or it simply does not save file and get an error message that print command failed. What is happening?

    {Ctrl + P} and select your printer in the Printer - Name box near the top of that window.
    http://kb.mozillazine.org/Problems_printing_web_pages

  • I am getting a error IO when trying to upload multiple images within wordpress using the flash uploader. I do not get the error when uploading using explorer. The error only appears if I try uploading using firefox....any ideas?

    I am getting a error IO when trying to upload multiple images within wordpress using the flash uploader. I do not get the error when uploading using explorer. The error only appears if I try uploading using firefox....any ideas?

    Logged the call with SAP who directed me to 'Define settings for attachments' in IMG and setting the 'Deactivate Java Applet' & 'Deactivate Attachment versioning' checkboxes - problem solved.

  • When I try to print from web page I get "printer not activated - error code 30", printer works on Internet Explorer

    When I try to print from web page I get a dialogue box "Printer not activated - error code 30" followed by a dialogue box "An unknown error occurred while printing". The printer works on websites when I use Internet Explorer. Also, if I copy the web page and paste it into a Word document, I can print a copy. This issue just started this week; I have not encountered this problem prior to this week. Please advise.

    What does that error message say?
    See this: http://kb.mozillazine.org/Problems_printing_web_pages

  • Error on server - printing stopped - Very First request to print any report

    vs2010 sp2
    CR13 sp1
    CR12 developed reports requested in app with no mods
    I'm getting there but I can't get the very first print request honored regardless of
    size to print on the very first request but will print when re-requested.
    A very large detailed report (+300 pages) errors as well.  The running time is
    over 1 hour from rendering to print.  The printing starts to spool but errors.
    I've caching, sessions to keep the large report alive.
    I have also increased timeout on the server.
    Thanks,
    Isaac

    Is is a website/web app
    I found the following which makes sense in relation to initial prints etc.
    Can you or someone tell me where to make this change in II6
    which we are using on the sql server 2000 box (initially I was was told it was 2003)
    ActiveX printing fails in the .NET web form viewer when IIS GZip Compression is in use. As a result, the following error message appears:
    "A Communication Error Occurred. Printing will be stopped".
    Cause
    This is a known issue with Crystal Reports .NET. This issue has been assigned Track ID ADAPT00459349. At time of writing, there are no file updates to resolve this issue.
    Resolution
    To work around this issue, do one of the two suggestions offered below:
    Disable compression for the following mime types:
    application/x-eor (end of report)
    application/x-ack (acknowledgement of printing finishing)
    application/x-epf (encapsulated page format)
    -OR-
    Use HTTPZip instead of GZip for compression.
    Thanks,
    Isaac

  • Getting error while uploading a document in a library

    Hi,
    I'm getting a weird error while uploading the document in the library. And I don't get it all the times but most of the times.
    It reads:
    The file <library name>/<file name> has been modified by i:0#.<user-id> on <datetime stamp>
    How to resolve this ? I have referred many articles on this one, but none helped.
    Thanks for your response in advance.
    Regards

    Hi Prajk,
    Based on your description, I recommend to check if there are any ItemAdded event receiver or workflows which are triggered when an item is created to update the document properties in the library.
    If there is any ItemAdded event receiver on the library, I recommend to wait for ItemAdded to finish before the ListFieldIterator control residing on EditForm.aspx loads (It’s the ListFieldIterator which displays the Item’s fields ).
    http://blogs.msdn.com/b/manuj/archive/2009/09/22/itemadded-event-on-document-library-the-file-has-been-modified-by-on-error.aspx
    If there is any workflow on the library, I recommend to add a Pause for Duration step at the beginning of the workflows.
    If above cannot work, please check ULS log for detailed error message.
    For SharePoint 2013, by default, ULS log is at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS.
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • Error message on print window for Vista--"out of paper"--I just loaded paper...?

    error message on print window for Vista--"out of paper"--I just loaded paper...?
    What can I do to get it to print?

    hi there,
    could you provide the community with a little more information to help narrow troubleshooting? Things like your printer model can help out a lot.
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Error when uploading a tif file

    Hi All,
    I want to upload a file in tif format.i am having the file with tiff format.
    when i upload through se78 /import and given the file name as c:\CCNA- Puerto Rico Region Logo.
    But it is showing the following error.
    Uploading TIFF Files to SAPscript Texts                                        1
    Load File
    c:\CCNA- Puerto Rico Region Logo
    The file contains  8,678,690  bytes
    This is a TIFF file with INTEL byte order
    First IFD offset:                                8,672,788
    Reading IFD from offset  8,672,788  Number of Tags         22
    ImageWidth:                                          2,226
    ImageLength:                                           910
    Error: BitsPerSample tag has length <> 1 or 3
    Compression:                                             1
    Photometric Interpretation:                              5
    Number of StripOffsets:                                  1
    SamplesPerPixel:                                         4
    RowsPerStrip:                                          910
    Number of StripByteCounts:                               1
    XResolution:                                     5,000,000  /     10,000
    YResolution:                                     5,000,000  /     10,000
    ResolutionUnit:                                          2
    TIFF format error: No baseline TIFF 6.0 file
    Appreciated ur valuable suggestions.
    Thanks,
    Aravinda

    Hi,
    Up loading tiff fife first activate rstxldmc program .
    excute the program give ur logo name.
    In se71 u can include that object , id, macrc or something (these are comes after excute the program give ur logo name)

  • Propagation error during upload entitlement process

    While applying entitlement we are getting this error
    queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1250031360989> <BEA-000000> <The [Upload] operation is halting due to the following failure: Posted content length of 10682519 exceeds limit of 10485760>**
    We are running on WLP 10.3. Any idea why we are getting this error since this used to work previously.
    Here is the complete log.
    ####<Aug 11, 2009 3:55:21 PM PDT> <Info> <InventoryServices> <sfrhvmportalint.prn.com> <AdminServer> <[ACTIVE] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1250031321516> <BEA-000000> <The environment name has been configured in web.xml as [Production].>
    ####<Aug 11, 2009 3:55:21 PM PDT> <Info> <InventoryServices> <sfrhvmportalint.prn.com> <AdminServer> <[ACTIVE] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1250031321517> <BEA-000000> <Verbose logging has been enabled in web.xml.>
    ####<Aug 11, 2009 3:55:21 PM PDT> <Info> <InventoryServices> <sfrhvmportalint.prn.com> <AdminServer> <[ACTIVE] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1250031321594> <BEA-000000> <Verbose logging has been disabled on the server.>
    ####<Aug 11, 2009 3:55:21 PM PDT> <Info> <InventoryServices> <sfrhvmportalint.prn.com> <AdminServer> <[ACTIVE] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1250031321595> <BEA-000000> <The propagation servlet is starting the [Mutex] operation.>
    ####<Aug 11, 2009 3:55:21 PM PDT> <Info> <InventoryServices> <sfrhvmportalint.prn.com> <AdminServer> <[ACTIVE] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1250031321595> <BEA-000000> <The mutex is currently available from the propagation servlet. >
    ####<Aug 11, 2009 3:55:21 PM PDT> <Info> <InventoryServices> <sfrhvmportalint.prn.com> <AdminServer> <[ACTIVE] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1250031321595> <BEA-000000> <The propagation servlet has finished the [Mutex] operation.>
    ####<Aug 11, 2009 3:55:21 PM PDT> <Info> <InventoryServices> <sfrhvmportalint.prn.com> <AdminServer> <[ACTIVE] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1250031321851> <BEA-000000> <Verbose logging has been disabled on the server.>
    ####<Aug 11, 2009 3:55:21 PM PDT> <Info> <InventoryServices> <sfrhvmportalint.prn.com> <AdminServer> <[ACTIVE] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1250031321852> <BEA-000000> <The propagation servlet is starting the [Maintenance Mode] operation.>
    ####<Aug 11, 2009 3:55:21 PM PDT> <Info> <InventoryServices> <sfrhvmportalint.prn.com> <AdminServer> <[ACTIVE] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1250031321949> <BEA-000000> <Maintenance mode has been enabled.>
    ####<Aug 11, 2009 3:55:21 PM PDT> <Info> <InventoryServices> <sfrhvmportalint.prn.com> <AdminServer> <[ACTIVE] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1250031321950> <BEA-000000> <The propagation servlet has finished the [Maintenance Mode] operation.>
    ####<Aug 11, 2009 3:55:22 PM PDT> <Info> <InventoryServices> <sfrhvmportalint.prn.com> <AdminServer> <[ACTIVE] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1250031322171> <BEA-000000> <Verbose logging has been disabled on the server.>
    ####<Aug 11, 2009 3:55:22 PM PDT> <Info> <InventoryServices> <sfrhvmportalint.prn.com> <AdminServer> <[ACTIVE] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1250031322172> <BEA-000000> <The propagation servlet is starting the [Download] operation.>
    ####<Aug 11, 2009 3:55:22 PM PDT> <Info> <InventoryServices> <sfrhvmportalint.prn.com> <AdminServer> <[ACTIVE] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1250031322173> <BEA-000000> <The modifier [allowMaintenanceModeDisabled] with a value of [true] will be used for this operation.>
    ####<Aug 11, 2009 3:55:22 PM PDT> <Info> <InventoryServices> <sfrhvmportalint.prn.com> <AdminServer> <[ACTIVE] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1250031322173> <BEA-000000> <The modifier [allowSecurityOutOfSync] with a value of [true] will be used for this operation.>
    ####<Aug 11, 2009 3:55:22 PM PDT> <Info> <InventoryServices> <sfrhvmportalint.prn.com> <AdminServer> <[ACTIVE] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1250031322187> <BEA-000000> <Validating that current user is in the Admin role...SUCCESS>
    ####<Aug 11, 2009 3:55:22 PM PDT> <Info> <InventoryServices> <sfrhvmportalint.prn.com> <AdminServer> <[ACTIVE] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1250031322188> <BEA-000000> <Validating that Maintenance Mode is enabled...SUCCESS>
    ####<Aug 11, 2009 3:55:30 PM PDT> <Info> <InventoryServices> <sfrhvmportalint.prn.com> <AdminServer> <[ACTIVE] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1250031330866> <BEA-000000> <Validating that LDAP and RDBMS security resources are in sync...SUCCESS>
    ####<Aug 11, 2009 3:55:30 PM PDT> <Info> <InventoryServices> <sfrhvmportalint.prn.com> <AdminServer> <[ACTIVE] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1250031330892> <BEA-000000> <The current export will overwrite any existing data in the directory [local/domains/portal_domain/servers/AdminServer/tmp/_WL_user/PortalEar/omcqtg/public/invSvcTempFolder1562360295].>
    ####<Aug 11, 2009 3:55:43 PM PDT> <Info> <InventoryServices> <sfrhvmportalint.prn.com> <AdminServer> <[ACTIVE] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1250031343259> <BEA-000000> <The user [weblogic] has initiated an export with the Propagation Tool.>
    ####<Aug 11, 2009 3:55:44 PM PDT> <Info> <InventoryServices> <sfrhvmportalint.prn.com> <AdminServer> <[ACTIVE] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1250031344417> <BEA-000000> <Validating the inventory file [local/domains/portal_domain/servers/AdminServer/tmp/_WL_user/PortalEar/omcqtg/public/invSvcTempFile868909347.zip] does not exceed the max inventory size of [4,294,967,296] bytes...SUCCESS>
    ####<Aug 11, 2009 3:55:44 PM PDT> <Info> <InventoryServices> <sfrhvmportalint.prn.com> <AdminServer> <[ACTIVE] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1250031344418> <BEA-000000> <The propagation servlet has finished the [Download] operation.>
    ####<Aug 11, 2009 3:56:00 PM PDT> <Info> <InventoryServices> <sfrhvmportalint.prn.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1250031360989> <BEA-000000> <Verbose logging has been disabled on the server.>
    ####<Aug 11, 2009 3:56:00 PM PDT> <Info> <InventoryServices> <sfrhvmportalint.prn.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1250031360989> <BEA-000000> <The propagation servlet is starting the [Upload] operation.>
    *####<Aug 11, 2009 3:56:00 PM PDT> <Error> <InventoryServices> <sfrhvmportalint.prn.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1250031360989> <BEA-000000> <The [Upload] operation is halting due to the following failure: Posted content length of 10682519 exceeds limit of 10485760>*
    ####<Aug 11, 2009 4:00:00 PM PDT> <Info> <Lease> <sfrhvmportalint.prn.com> <AdminServer> <[ACTIVE] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1250031600957> <BEA-403301> <Auto lease timer is still running for lease PortalFrameworkDotFilesLoadedLease&PortalEar&PortalWar.war.>

    I tried the last two options for Increasing the Default Upload File Size as said in the below site but it does not work out. Any other solutions for avoiding this error
    The [Upload] operation is halting due to the following failure: Posted content length of 69302451 exceeds limit of 10485760
    http://download.oracle.com/docs/cd/E13155_01/wlp/docs103/prodOps/propToolAdvanced.html#wp1070764

Maybe you are looking for

  • Can't get on to my own network

    Set it up once. I've got one computer running 10.3.9 and a laptop running 10.4.?. Both could "find" the network in their airport pulldown menus. Saw name of network in pulldown menu. Clicked on it. Didn't work. Tried "other" then found it in the pull

  • Nokia Map and Drive+ Beta on Lumina 920 Feedback

    So I took my new phone down to MD/DC area in the last few days and here are a few things that I would like to post as my feedback on what would be nice to have, fixes, etc.  [I used both my new Lumia 920 and my wife's Samsung Galaxy Note 2 as compars

  • How to search for all PDF files on my hard drive

    How can I search for all of a file type on my hard drive without getting documents that happen to have the text in them?  i.e. PDF or DOC or XLS Thank you Peg

  • SD invoice in different language

    Hi Friends, I tried to keep two versions of invoice output, one in English and the other one in Spanish. Here is what I did, 1.In Smartform,Copy English invoice_EN to generate another Invoice_SP. Then go to newly created Invoice_SP and change it's te

  • BIB-9509 Oracle OLAP did not create cursor.

    I am getting following error. How can this be resolved? BIB-9509 Oracle OLAP did not create cursor. oracle.express.ExpressServerExceptionError class: OLAPI Server error descriptions: DPR: Unable to create server cursor, Generic at TxsOqDefinitionMana