Error in uploading process catalog of Process control

Hello,
When i am trying to upload the controls through process catalog of advanced upload in process control , i get an error message as Number of columns required 40, Found 39 columns .
I have used the same format what the tool has given as a standard format but still i get the error as i mentioned earlier .
I have done all the necessary possibilities of giving a blank at the 40 th column but still it doesn't accept.
Can anyone please help me in this regard so that i can go ahead in creating the controls instead doing manually.
Regards,
Raghu
Edited by: Raghu k on Jan 29, 2008 10:40 AM

Raghu,
Carefully review your data to make sure eveything lines up and is appropriate. Then generate a new template and make sure it has all components in it even though you might not use everything. Then use the 'transfer" function to transfer the data from the existing file to the new template.
Try that. Sometimes MDUG will throw strange errors is you reuse files or copy them. Start with a clean template and this will hopefully work. This has worked for me in the past when I'd see strange, never seen before errors.
Thanks.
Matt

Similar Messages

Error in GRC process Control 2.5 login through NWBC

Hi All,
we have installed GRC Process Control 2.5 and configured as per the installation guide. when tryig to connect the same through NWBC, we are getting the following error.
"The navigation tree is empty (no entries exist for the roles you are assigned in PFCG/PCD)"
Please help me on this error.
Regards,
Gurugobinda

Hi Gurugobinda,
In PC 2.5 NWBC, the menu application is based on the role assignment of current login user.
1. T-Code PFCG: View the SAP_GRC* roles, navegate to the tab Menu, make sure the menu for this role exists. It should exist since the role is delivered by SAP. If you are customizing your own role, you may forget to copy the menu.
2. T-Code SU01: View the user you are using, make sure the role assignment is done.
3. Verify the menu from Backend: Login to the R/3 system, at the home page SAP Easy Access page, select User Menu (Ctrl+F10) in the application toolbar, the menu structure will be generated for current user based on the Menu of the roles assigned to him/her.
4. Login to NWBC via the same user, the menu hierarchy should be shown correctly.
Any problem please post later.
Thanks
Amos

Error while uploading supplier catalog

Hi,
We have CCM release 200_700 with support package SAPK-27004INCCM. While uploading supplier catalog, we get the following errors. Any suggestions please.
Value assignment not valid for characteristic /CCM/ORIG_CATALOG_ID - char. was not assigned
Value assignment not valid for characteristic /CCM/PARTNER_GUID - char. was not assigned
Value assignment not valid for characteristic /CCM/PICTURE - char. was not assigned
Value assignment not valid for characteristic /CCM/PICTURE - char. was not assigned
Value assignment not valid for characteristic /CCM/PICTURE - char. was not assigned
Value assignment not valid for characteristic /CCM/PRICE - char. was not assigned
Value assignment not valid for characteristic /CCM/PRICE_BASIS_QUANTITY - char. was not assigned
Value assignment not valid for characteristic /CCM/PRODUCT_GROUP - char. was not assigned
Value assignment not valid for characteristic /CCM/PRODUCT_ID - char. was not assigned
Value assignment not valid for characteristic /CCM/SHORT_DESCRIPTION - char. was not assigned
Value assignment not valid for characteristic /CCM/SUPPLIER_ID - char. was not assigned
Value assignment not valid for characteristic /CCM/SUPPLIER_NAME - char. was not assigned
Value assignment not valid for characteristic /CCM/SUPPLIER_PART_NO - char. was not assigned
Value assignment not valid for characteristic /CCM/BASE_UOM - char. was not assigned
Value assignment not valid for characteristic /CCM/LEAD_TIME - char. was not assigned
Value assignment not valid for characteristic /CCM/LONG_DESCRIPTION - char. was not assigned
Value assignment not valid for characteristic /CCM/MINIMUM_QUANTITY - char. was not assigned
Value assignment not valid for characteristic /CCM/MNFCTR_ID - char. was not assigned
Value assignment not valid for characteristic /CCM/MNFCTR_PART_NO - char. was not assigned
Value assignment not valid for characteristic /CCM/ORDER_UNIT - char. was not assigned
Value assignment not valid for characteristic /CCM/ORIG_CATALOG_ID - char. was not assigned
Value assignment not valid for characteristic /CCM/PARTNER_GUID - char. was not assigned
Value assignment not valid for characteristic /CCM/PICTURE - char. was not assigned
Value assignment not valid for characteristic /CCM/PICTURE - char. was not assigned
Value assignment not valid for characteristic /CCM/PICTURE - char. was not assigned
Value assignment not valid for characteristic /CCM/PRICE - char. was not assigned
Value assignment not valid for characteristic /CCM/PRICE_BASIS_QUANTITY - char. was not assigned
Value assignment not valid for characteristic /CCM/PRODUCT_GROUP - char. was not assigned
Value assignment not valid for characteristic /CCM/PRODUCT_ID - char. was not assigned
Value assignment not valid for characteristic /CCM/SHORT_DESCRIPTION - char. was not assigned
Value assignment not valid for characteristic /CCM/SUPPLIER_ID - char. was not assigned
Value assignment not valid for characteristic /CCM/SUPPLIER_NAME - char. was not assigned
Value assignment not valid for characteristic /CCM/SUPPLIER_PART_NO - char. was not assigned
Value assignment not valid for characteristic /CCM/BASE_UOM - char. was not assigned
Value assignment not valid for characteristic /CCM/LEAD_TIME - char. was not assigned
Value assignment not valid for characteristic /CCM/LONG_DESCRIPTION - char. was not assigned
Value assignment not valid for characteristic /CCM/MINIMUM_QUANTITY - char. was not assigned
Value assignment not valid for characteristic /CCM/MNFCTR_ID - char. was not assigned
Value assignment not valid for characteristic /CCM/MNFCTR_PART_NO - char. was not assigned
Value assignment not valid for characteristic /CCM/ORDER_UNIT - char. was not assigned
Value assignment not valid for characteristic /CCM/ORIG_CATALOG_ID - char. was not assigned
Value assignment not valid for characteristic /CCM/PARTNER_GUID - char. was not assigned
Value assignment not valid for characteristic /CCM/PICTURE - char. was not assigned
Value assignment not valid for characteristic /CCM/PICTURE - char. was not assigned
Value assignment not valid for characteristic /CCM/PICTURE - char. was not assigned
Value assignment not valid for characteristic /CCM/PRICE - char. was not assigned
Value assignment not valid for characteristic /CCM/PRICE_BASIS_QUANTITY - char. was not assigned
Value assignment not valid for characteristic /CCM/PRODUCT_GROUP - char. was not assigned
Value assignment not valid for characteristic /CCM/PRODUCT_ID - char. was not assigned
Value assignment not valid for characteristic /CCM/SHORT_DESCRIPTION - char. was not assigned
Value assignment not valid for characteristic /CCM/SUPPLIER_ID - char. was not assigned
Value assignment not valid for characteristic /CCM/SUPPLIER_NAME - char. was not assigned
Value assignment not valid for characteristic /CCM/SUPPLIER_PART_NO - char. was not assigned
Value assignment not valid for characteristic /CCM/BASE_UOM - char. was not assigned
Value assignment not valid for characteristic /CCM/LEAD_TIME - char. was not assigned
Value assignment not valid for characteristic /CCM/LONG_DESCRIPTION - char. was not assigned
Value assignment not valid for characteristic /CCM/MINIMUM_QUANTITY - char. was not assigned
Value assignment not valid for characteristic /CCM/MNFCTR_ID - char. was not assigned
Value assignment not valid for characteristic /CCM/MNFCTR_PART_NO - char. was not assigned
Value assignment not valid for characteristic /CCM/ORDER_UNIT - char. was not assigned
Value assignment not valid for characteristic /CCM/ORIG_CATALOG_ID - char. was not assigned
Value assignment not valid for characteristic /CCM/PARTNER_GUID - char. was not assigned
Value assignment not valid for characteristic /CCM/PICTURE - char. was not assigned
Value assignment not valid for characteristic /CCM/PICTURE - char. was not assigned
Value assignment not valid for characteristic /CCM/PICTURE - char. was not assigned
Value assignment not valid for characteristic /CCM/PRICE - char. was not assigned
Value assignment not valid for characteristic /CCM/PRICE_BASIS_QUANTITY - char. was not assigned
Value assignment not valid for characteristic /CCM/PRODUCT_GROUP - char. was not assigned
Value assignment not valid for characteristic /CCM/PRODUCT_ID - char. was not assigned
Value assignment not valid for characteristic /CCM/SHORT_DESCRIPTION - char. was not assigned
Value assignment not valid for characteristic /CCM/SUPPLIER_ID - char. was not assigned
Value assignment not valid for characteristic /CCM/SUPPLIER_NAME - char. was not assigned
Value assignment not valid for characteristic /CCM/SUPPLIER_PART_NO - char. was not assigned
Value assignment not valid for characteristic /CCM/BASE_UOM - char. was not assigned
Value assignment not valid for characteristic /CCM/LEAD_TIME - char. was not assigned
Value assignment not valid for characteristic /CCM/LONG_DESCRIPTION - char. was not assigned
Value assignment not valid for characteristic /CCM/MINIMUM_QUANTITY - char. was not assigned
Value assignment not valid for characteristic /CCM/MNFCTR_ID - char. was not assigned
Value assignment not valid for characteristic /CCM/MNFCTR_PART_NO - char. was not assigned
Value assignment not valid for characteristic /CCM/ORDER_UNIT - char. was not assigned
Value assignment not valid for characteristic /CCM/ORIG_CATALOG_ID - char. was not assigned
Value assignment not valid for characteristic /CCM/PARTNER_GUID - char. was not assigned
Value assignment not valid for characteristic /CCM/PICTURE - char. was not assigned
Value assignment not valid for characteristic /CCM/PICTURE - char. was not assigned
Value assignment not valid for characteristic /CCM/PICTURE - char. was not assigned
Value assignment not valid for characteristic /CCM/PRICE - char. was not assigned
Value assignment not valid for characteristic /CCM/PRICE_BASIS_QUANTITY - char. was not assigned
Value assignment not valid for characteristic /CCM/PRODUCT_GROUP - char. was not assigned
Value assignment not valid for characteristic /CCM/PRODUCT_ID - char. was not assigned
Value assignment not valid for characteristic /CCM/SHORT_DESCRIPTION - char. was not assigned
Value assignment not valid for characteristic /CCM/SUPPLIER_ID - char. was not assigned
Value assignment not valid for characteristic /CCM/SUPPLIER_NAME - char. was not assigned
Value assignment not valid for characteristic /CCM/SUPPLIER_PART_NO - char. was not assigned
Value assignment not valid for characteristic /CCM/BASE_UOM - char. was not assigned
Value assignment not valid for characteristic /CCM/LEAD_TIME - char. was not assigned
Value assignment not valid for characteristic /CCM/LONG_DESCRIPTION - char. was not assigned
Value assignment not valid for characteristic /CCM/MINIMUM_QUANTITY - char. was not assigned
Value assignment not valid for characteristic /CCM/MNFCTR_ID - char. was not assigned
Value assignment not valid for characteristic /CCM/MNFCTR_PART_NO - char. was not assigned
Value assignment not valid for characteristic /CCM/ORDER_UNIT - char. was not assigned
From Support team

Hi,
Any suggestions for this thread?
Regards,
Support Team

How to Debug CCM Catalog Upload Process

SRM Gurus,
Can anyone please outline the steps to debug the uploading process of the .CSV file in CCM 2.0?
The upload of my supplier catalog terminated due to an error and I'd like to debug to see what's causing the error.
Any tips would be greatly appreciated.
SN

Hi
Check for logs created in SLG1 Transaction to know, the causes of dump, if any.
Also see reports /CCM/INITALLISE_CME , SRM_EXTRACTED_CTLG.
<b>Please go through the following SAP OSS Notes below -></b>
Note 1043305 SRM_EXTRACTED_CTLG upload terminates with error.
Note 950500 Source Cat.of enriched cat.item missing
Note 858615 Lock problem for many products
Note 852622 "Category not found" termination at publication
Note 844547 Impossible to create characteristics using upload
Note 747454 Data enhancement: Error characteristic-category-relationship
Note 1024002 - Error introduced by CCM SP07
<b>Related links -></b>
Re: Unable to Edit the Charateristic?
Re: problem after uploading user defined characterstic schema in product catalo
Re: CCM 2.0
Re: Unable to run the report /CCM/initialise_cme
Do let me know.
Regards
- Atul

Error when attaching Documents during Process Control to Submit Data

Hi,
In HFM 411 the user's were able to attach documents (that were earlier uploaded to Custom Documents) in the Process Control while submitting the Data. In 931 they receive an error message that says it is unable to change the review level. However tehy are able to submit the data without attaching documents.
The security set-up seems to be fine, as the admin receives an error message as well, but this time it says "Invalid Javascript returned by the server".
Anyone any idea?
Thank you so much for your help.

Hi,
I (as administrator) manage to attach document at every step of review level process.
Can you check that MaxNumDocAttachments and MaxDocAttachmentSize are correctly set up in the metadata (application settings).
Besides HFM User Guide stands : "To attach or extract any custom documents to or from the server, you must be assigned the Manage Custom Documents security role."
Hope this is helpful.
Regards,
Lionel.

SRM 7.0 Process-Controlled (BRF) Workflow -- Error message to Shopping Cart

I am modifying a BRF Expression used to calculate approval levels. During this calculation, I may run into error conditions (e.g. Currency tranlsation not found) that I want to display to the user (in the Shopping Cart).
I have tried raising the following exceptions:
/sapsrm/CX_WF_RULE_ERROR.
/sapsrm/CX_WF_RULE_ABORT.
Raising these exceptions do result in SLG1 log entries being written, but the User is not informed of the error (ie. at top of shopping cart where other messages display).
I can probably jump out of the Webdynrpo to read logs, but thought there MUST be some standard way of passing error conditions from the BRF, back to WF, and then back to the Webdynpro Window.
Anybody raise error messages back to the online user from Process-Controlled Workflow?
Thanks,
- Tim

>
Saravanan Dharmaraj wrote:
> Hi Tim,
>
> I am not sure about your business requirement, but if you want to display custom error message while user create a SC, SAP has provided a standard BADI - BBP_DOC_CHECK_BADI. You can implement this Badi to raise a custom error,warning message. You can build your brf logic in the BADI implementation..
>
>
> Best Regards,
> Saravanan Dharmaraj.
Hi Saravanan,
I am actually modifying the Approval Limit Checks (for multi-currency translations) that you recently coded in Maryland. It can occur that errors occur in determining limits (new Currency translation I just added), or during the lookup of agents (ie user config is inconsistent).
In these cases, I can make the shopping cart Dump, by raising untrapped error messages, or assertions. However, I would like to raise exceptions that get trapped (such as the ones I identified in original post), and then make their way to the shopping cart.
Unless I am missing something, I don't think the WF BADIs, or BRF are gonna communicate errors back to the shopping cart, even though these components are called during cart creation and checks.
I realize that I can recode the Agent Determination BADIs, BRF calls, or even read BRF logs within BBP_DOC_CHECK_BADI. I mentioned this in my original posting as well.
Anyway, any help is appreciated.
Thanks,
- Tim

Problem: An error occured during the uploading process.

Hello! I've searched around but I am having difficulty finding a solution to this problem.
I am trying to upload videos through Adobe Premiere Elements 9 to YouTube, using the preset options in the share tab. This worked previously without issue, but then one day I continually ran into an error stating "Sorry, an error occured during the uploading process. Please try again later." However, it eventually started working. It is now a few weeks later, and I am having the very same issue. I am unable to upload to YouTube or any other service through the Share tab. Even loading the software itself, the opening splash screen is unable to grab my Adobe ID. It never stops "Gathering User Info..."
Steps I have tried:
Going to Edit -> Preferences -> Web Sharing and hitting the refresh button to update settings.
Checked router settings.
Enabled DMZ on router and linked it to this specific computer.
Rebooted PC and router, and tried updating the Web Sharing settings multiple times.
I honestly do not believe it to be a router issue, especially since it is currently in DMZ mode and I have had absolutely no trouble with any other software. This has continued to baffle me though, and finding help is difficult. Searches keep giving me encoding settings for YouTube videos, and few results pertain to this particular issue.
I am aware I could export the video normally and upload through YouTube that way, but on DSL, my upload speed is pretty terrible for a high quality video. The YouTube HD setting has been great for me in the past, as files are small but still look great online. I would really like to get it working again, both for ease and convenience for simple projects.
If anyone has any ideas as to what could be causing a problem, I would be greatly appreciative of any advice. In regards to the project itself, there is no real editing being done at this point, as I am trying to eliminate any possibility of error elsewhere. I opened a new project, added a video clip and went directly to upload it, resulting in the error above.
I don't believe it matters in this situation, but just in case:
Windows 7
AMD Phenom II X4 820 - 2.80 GHz
6 GB RAM
Radeon HD 5880 1GB
Connecting through a Netgear WNDR3400 router, standard DSL connection.

Sorry, not seeing where to edit my original post.
Just wanted to add, that I am able to visit both the Photoshop.com website, as well as YouTube through my browser. So I am not being blocked somehow to those particular sites. It only seems to be through the software that I cannot connect to any of the online services to upload videos to.
Additionally, the only virus software running is Microsoft Security Essentials. It has never raised a flag before with this software or caused interference in the past. I do not use Norton or any other service which are known to interfere with programs often.
Just a quick example as well, pinging Photoshop.com through the command prompt shows I am getting through just fine. As you can see in this image though, it cannot seem to ever connect and grab my user information.
http://i.imgur.com/S53xN.png

Workflow error in fork step, process control, wait event

I am using fork step in workflow which has 2 parallel branches. In 1st branch i have a user decision step followed by a task for posting PO document in case of approval. In the 2nd branch of fork step I have a wait step to wait for an event followed by the same task for posting document with a process control step after that in the end to cancel the workitem(workitem generated by user decision step in the 1st branch of fork). I created the event by using a custom BOR object.
After the fork step is triggered, i have both a wait event running and workitem generated. When i raise the wait event from SWUE by entering the event, object key etc it works fine i.e., the workitem in the other branch is set of logically deleted and workflow ends.
But if the wait event is triggered from the program i.e., using FM SWW_WI_CREATE_VIA_EVENT, both get an error message in workflow log(SWIA). The message is: Error when executing the binding between work item 000000XXXXXX and flow item 000000XXXXXX where workitem number is the workitem id of the posting document task and flow item id is the workflow parent id

hi,
message is self explanatory.
Activate the event trace SWELS, then do the event with SWUE and within your program (als please use SAP_WAPI function modules).
Now compare the 2 events in SWEL to see what the differences are .
Kind regards, Rob Dielemans

The upload has failed. An unknown server error occurred during processing. Please try again

I keep getting this message when I try to upload a folio "The upload has failed. An unknown server error occurred during processing. Please try again". It happens every time, some articles do upload but some not.

Thanks Automator21 I manage to upload most of my articles successfully by starting again the whole process. But I have 4 articles that I can't upload, all of this articles have big size videos (one 50mb, other one with 70mb, other with 4 small 30mb videos). I could upload those articles by taking the videos out, but I want those videos on my articles.
I use Adobe Media Encoder to compress the videos and they are not in high quality, for example the 70mb file is an 640x480 8 min. long video. And they are all with H.264 encoding and .mp4.
Do you know how can I fix this problem.
Thanks!

Process Control Workflow Configuration error on portal

Hi Experts,
We are using process controlled workflow for BUS2121 and activated a BC Set "/SAPSRM/C_SC_600_000_SP04" Shopping cart without approval.
For this We have created a Event and a Expression in BRF as constant for Process schema evaluation. No approval is required as of now. But when try to shop from the portal it shows a dump as:
The following error text was processed in system SRD : Dynamic type conflict when assigning references
The error occurred on the application server dl3803_SRD_40 and in the work process 2 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: INIT_BRF_TRACE of program /SAPSRM/CL_WF_BRF_MSG=========CP
Method: CONSTRUCTOR of program /SAPSRM/CL_WF_BRF_MSG=========CP
Method: INITIALIZE_BRF_MSG of program /SAPSRM/CL_WF_BRF_MSG=========CP
Method: /SAPSRM/IF_WF_RULE_CONNECTOR~EVALUATE of program /SAPSRM/CL_WF_BRF_CONNECTOR===CP
Method: /SAPSRM/IF_WF_RULE_CONNECTOR~EVALUATE of program /SAPSRM/CL_WF_SCHEME_PROVIDER=CP
Method: GET_SCHEME of program /SAPSRM/CL_WF_SCHEME_PROVIDER=CP
Method: GET_PROCESS_SCHEME of program /SAPSRM/CL_WF_CONFIGURATION===CP
Method: CREATE_PROCESS_LEVEL_SEQUENCE of program /SAPSRM/CL_WF_CONFIGURATION===CP
Method: CREATE_PROCESS_INSTANCE of program /SAPSRM/CL_WF_PROCESS_MANAGER=CP
Method: CREATE_PROCESS_FORECAST of program /SAPSRM/CL_WF_APV_FACADE======CP
Kindly help to solve this problem.

Hi Anand,
I am facing the same problem. Were you able to resolve that issue? if so, what is the solution? I don't find any relevant note for this.
Probelm: BRF is activated and when you do save/check on SC, throws short dump with error message as
"Dynamic type conflict when assigning references".
"MOVE_CAST_ERROR" "CX_SY_MOVE_CAST_ERROR"
Thanks
Akbar

Error from opmn during process control operation

This is the error I get while starting "home" instance on Windows Server 2003 SP2 32b box.
Product - AS10gR3 (10.1.3.4)
===
oracle.ias.opmn.optic.OpticControlException: Error from opmn during process control operation
     at oracle.ias.opmn.optic.AbstractOpmnEntity.runCommand(AbstractOpmnEntity.java:174)
     at oracle.ias.opmn.optic.AbstractOpmnEntity.start(AbstractOpmnEntity.java:110)
     at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:89)
     at oracle.appserver.startupconsole.control.Controller.start(Controller.java:70)
     at oracle.appserver.startupconsole.control.GroupController.doStart(GroupController.java:47)
     at oracle.appserver.startupconsole.control.Controller.start(Controller.java:70)
     at oracle.appserver.startupconsole.view.controller.ControllerAdapter.start(ControllerAdapter.java:31)
     at oracle.appserver.startupconsole.view.controller.MasterControlAdapter.run(MasterControlAdapter.java:94)
     at oracle.appserver.startupconsole.view.Runner.main(Runner.java:40)
=====
Tried - getting OPMN error while starting Oracle SOA Suite - doesnt work.
Any ideas anyone?

Hi,
Can you post the error from the begining, this is a generic exception and could be for any reason.
Also, please refer:
After Changing The HTTP Port To 80 Attempting To Start OHS Service Fails To Start Apache [ID 1104898.1]
Error During Stopping Oracle Application Server Components With "Error from opmn during process control operation" [ID 941822.1]
"oracle.appserver.startupconsole.model.ConsoleException: An unknown OPMN error" Thrown by OC4J During Startup Running OIM [ID 832025.1]
Regards,
Mithun

HTTP 404 Not Found Error in Process Control Mail

Hi All,
I am working on version 9.3.3
I have setup e-mail alerts through a SMTP server.
When I am going on Process control and starting the cycle OR promoting to any level, I am getting a Minimized window showing HTTP 404 Not Found error and Mail is not going.
Whereas My ICP mail alerts are working fine
Please suggest something to resolve.
Regards,
Jai

Hi Jai,
Check the below documents, which might be helpful to you.
Financial Management Error "Server object error ASP 0177 : 80131040" When Sending Email Alerts (Doc ID 830823.1)
Financial Management Error "HTTP 500 Internal Server Error" in Process Management E-Mail Alerting (Doc ID 855942.1)
Process Control Email Alerts Are Not Working For Certain Entities and Entity Hierarchies (Doc ID 1160594.1)
Hope this helps,
Thank you,
Charles Babu J
Edited by: CJX on Jan 30, 2012 7:08 AM

GRC Process Control Workflow error

Dear all,
After creation of Self-Assessment Test Plan, or any other plan, it gets "error" status.
At transaction SWI1 the task has status "completed" but the task wasn´t performed by any agent. So the task doesn´t appear on user's inbox. Does anyone ever got this error and have any ideia to solve?
It´s a recent installation of Process Control.
Best Regards
Edited by: Rodrigo Oliveira Nagamine on Sep 14, 2010 9:01 PM

I checked the log and I am getting the following message:
The Scheduler is inactive: the Maintenance Mode is enabled!
But I already configured the jobs on ABAP.
Any ideas?

Process Control Error in Workspace

Hello Gurus,
Please Help me in this ASAP.
we have stopped our Production servers and in the process of up and running Disaster recovery servers.
completed the following tasks.
system configurationis successful
registered the application successfully
when we are trying to access the process control in data tasks getting the follwing error message.
ERROR 1B6 Object doesn't support this property or method
please anyone advise what the problem exactly and ASAP.
Regards,

Thank you for your reply Varun.
if i am not mistaken ru taking about configuration? i have completed all the configuration.
can u guide me how to set the metadata setting and ur taking about windows client or web?
please advise i need ur help urgently.
thanks...

GRC Process Control - Case ID Error in the workflow

Hi Experts,
I am not able to trigger workflow through planner in Process Control 10.0. It shows "Error" status in Planner Monitor.
In SWI1, the error message shows as "Case "xxxxxx(Random number)" does not exist". I have attached the screen shot of the same.
Kindly let me know the missing configuration for the below issue. Thanks

Hi
Thanks for the replies..
The issue is resolved and now the workflow is getting triggered..
Solution : I have not maintained the relevant roles for WF-BATCH User in the system...
Regards,
Vinay

Error in uploading process catalog of Process control

Similar Messages

Maybe you are looking for