Error in user exit for System menu

Hi,
I was working on the user exit for the System menu.
There was some error in the menu exit I added and then logged off.
Now when I am tryin to log in the system again and error is given without allowing me to login because the initial log on screen loads the system menu.
Can anyoone help me resolve this issue.
Edited by: Ashutosh Tripathi on Mar 26, 2008 11:16 AM

Michael,
       Thanks for the quick response,
I did check in IMG, an entry is already there, the 'primary field' is checked,
USD is assigned to the iso code USD.
Regards,
Disney.

Similar Messages

  • User exit for VL02n to trigger error message by checking PFI status

    Please help me in finding out the exact user exit for the following enhancements:
    1.When i go to VL02n transaction and try to delete the line item in the delivery for which already PFI(Profarma Invoice) is created an error message should be triggered by us stating "Proforma already created" 
    2.Error message will have relevant PFI details and instruction to user to Cancel [Complete] the PFI as the first step in case of delivery item deletion. User will be allowed to delete the item only after the PFI is set to cancelled status.
    3.An information message should be generated automatically if user tries to change the quantity in delivery document line item, if PFI is already created for the same
    4.Information message will have relevant PFI details but allows the user to change the quantity.
    How can this be done? Thro' which user exit?
    Please post your suggesstions?

    Hi,
    Use the BADI "LE_SHP_DELIVERY_PROC".  Methods "FILL_DELIVERY_ITEM",  "CHANGE_DELIVERY_ITEM", "CHECK_ITEM_DELETION" will be useful
    for your requirement.
    Regards
    Vinod

  • User Exit for TCode CJ20N to populate Project system user fields

    Hi team,
    need one support from your side..
    I am looking for User Exit for TCode CJ20N to populate Project system user fields on SAVE.
    I have found
    Enhancement        CNEX0001
    Short text         PS: User field
    which is exactly suiting my req...as it has USER Fields (USR08/USR09 )in export paramters..
    BUT it is not triggering on SAVE,,
    Any hint or is any other user exit/badi which have USER Fields in export paramters.
    Warm Regards
    Krishan

    Hi Krishnan,
    If you want a custom tab that contains User defined fields at Project level then you have to use CNEX0006 user exit. Before this you must declare your fields using the CI include CI_PROJ in the PROJ table.
    If you want a custom tab that contains User defined fields at WBS level then you have to use CNEX0007 user exit. Before this you must declare your fields using the CI include CI_PRPS in the PROJ table.
    In the PBO function module exit of these exits you must use the following statements as the first statement.
    MOVE-CORRESPONDING sap_proj_imp TO proj.
    MOVE-CORRESPONDING sap_prps_imp TO prps.
    In the PAI function module exit of these exits you must use the following statement as the last statement.
    MOVE-CORRESPONDING proj TO cnci_proj_exp.
    MOVE-CORRESPONDING prps TO cnci_prps_exp.
    The remaining programming as in the case any Screen Exit.
    Regards,
    Abijith

  • User Exits for posting delivery related FI/CO docs in another system

    My company is currently running two SAP systems.  System A takes sales orders and creates delivery documents.  System B is the corporate financial system.
    When delivery and goods issues are created in System A, we want to generate the associated FI and CO documents in System B real-time.
    What is the best approach to implement this scenario?  Should we call the Post Accounting Docs BAPIs in system B using some user exits in System A?  Or should we expose those BAPIs as web services and make web service calls?

    Hi Simon,
    I think the best way is to create an IDoc in system A when the document is created (via User exit or something), and send it to system B.
    There are some IDocs to receive this information, but you have to code the send of the IDoc (Create the IDoc and call FM MASTER_IDOC_DISTRIBUTE).
    The IDocs to do that are:
    ACC_GL_POSTING
    ACC_BILLING
    ACC_INVOICE_RECEIPT
    Regards
    PabloX

  • User Exit for CO07

    Hi All,
    I have come across one requirement:
    While creating rework order in CO07, in the Component overview screen, there are two types of line items:
    1. Component to be issued (261 movement)--- Qnty value is positive (like 150 meters)
    2. Component to be received (531 movement)--- Qnty value is negative (like -75 meters)
    There are so many line items in this screen. (some with positive values and some with negative)
    I want the system to check,
    sum of all positive values = sum of all negative values
    If there is difference, then the system should give an Error message and not allow:
    1. either the release of order
    2. or Saving of order
    I think, User Exit can be given for this effect.
    Please let me know, the exit for the above problem.
    Dinesh

    CHECK THE USER-EXITS FOR CO07:
    CCOWB001            Customer exit for modifying menu entries
    COIB0001            Customer Exit for As-Built Assignment Tool
    COZF0001            Change purchase req. for externally processed operat
    COZF0002            Change purchase req. for externally procured compone
    PPCO0001            Application development: PP orders
    PPCO0002            Check exit for setting delete mark / deletion indica
    PPCO0003            Check exit for order changes from sales order
    PPCO0004            Sort and processing exit: Mass processing orders
    PPCO0005            Storage location/backflushing when order is created
    PPCO0006            Enhancement to specify defaults for fields in order
    PPCO0007            Exit when saving production order
    PPCO0008            Enhancement in the adding and changing of components
    PPCO0009            Enhancement in goods movements for prod. process ord
    PPCO0010            Enhancement in make-to-order production - Unit of me
    PPCO0012            Production Order: Display/Change Order Header Data
    PPCO0013            Change priorities of selection crit. for batch deter
    PPCO0015            Additional check for document links from BOMs
    PPCO0016            Additional check for document links from master data
    PPCO0017            Additional check for online processing of document l
    PPCO0018            Check for changes to production order header
    PPCO0019            Checks for changes to order operations
    PPCO0021            Release Control for Automatic Batch Determination
    PPCO0022            Determination of Production Memo
    PPCO0023            Checks Changes to Order Components
    STATTEXT            Modification exit for formatting status text lines
    WITH LUCK,
    PRITAM.

  • User Exits for Inbound Process

    hi all
    can any one please give some example user exits in inbound process and explain the omportance of user exits
    Thank you,
    Swapna

    hi
    Userxits allow us to add our own functionality to SAP standard program
    without modifying it . These are implemented in the form of subroutines and hence are also known as FORM EXITs. The userexits are generally collected in includes and attached to the standard program by the SAP.
    Types of User exits
    1. Menu Exits
    2.Function exits
    3.Table exits
    4.Screen exits
    5.Keyword exits
    6.Field exits.
    also refer to the links below.. can get more info on user exits
    list of user exits
    http://www.planetsap.com/userexit_main_page.htm
    can also get the list of user exits thru..
    Tcode: CMOD -> Utilities -> SAP Enhancements -> F8 Execute
    User Exits Notes:
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/81/8c5738ee806b0ee10000009b38f889/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/bf/ec07a25db911d295ae0000e82de14a/content.htm
    below are some of the useful invound and outbound userexits
    <b>IDoc Inbound User Exits</b>
    1.     ACC_BILLING
    Accounting: Post invoice (OAG: LOAD RECEIVABLE)
    •     ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
    2.     ACC_EMPLOYEE_EXP
    FI/CO: HR posting GL (AcctngEmplyeeExenses)
    •     ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
    3.     ACC_EMPLOYEE_PAY
    FI/CO: HR posting AP (AcctngEmplyeePaybles)
    •     ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
    4.     ACC_EMPLOYEE_REC
    FI/CO: HR posting AR (AcctngEmplyeeRcvbles)
    •     ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
    5.     ACC_GL_POSTING
    Accounting: General G/L account posting
    •     ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
    6.     ACC_GOODS_MOVEMENT
    Accounting: Post goods movement (OAG: POST JOURNAL)
    •     ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
    7.     ACC_INVOICE_RECEIPT
    Accounting: Post invoice receipt (OAG: LOAD PAYABLE)
    •     ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
    8.     ACLPAY Accounting: Inbound invoice
    •     ACCID001 EXIT_SAPLACC1_031 IDoc ACLPAY: Userexit for creditor in accounting document
    •     ACCID001 EXIT_SAPLACC1_032 IDoc ACLPAY: Userexit for GL posting in accounting document
    •     ACCID001 EXIT_SAPLACC1_033 IDoc ACLPAY: Userexit for taxes in accounting document
    9.     ACLREC
    Accounting: Billing document
    •     ACCID001 EXIT_SAPLACC1_011 IDoc ACLREC: Userexit for debitor in accounting document
    •     ACCID001 EXIT_SAPLACC1_012 IDoc ACLREC: Userexit for GL posting in accounting document
    •     ACCID001 EXIT_SAPLACC1_013 IDoc ACLREC: Userexit for taxes
    10.     ACPJMM
    Posting in accounting from materials management
    •     ACCID001 EXIT_SAPLACC1_021 IDoc ACPJOU: Userexit for GL posting in accounting document
    11.     ARTMAS
    Create and change of material master (Retail)
    •     MGV00003 EXIT_SAPL1001_003 Enhancement for article master: IDoc inbound
    12.     BLAOCH
    Purchasing contract change
    •     MM06E002 EXIT_SAPLEINN_001 Customer enhancements for Idocs: contracts
    •     MM06E002 EXIT_SAPLEINN_002 Customer enhancements for Idocs: contracts
    •     MM06E002 EXIT_SAPLEINN_003 Customer enhancements for Idocs: contracts
    13.     BLAORD
    Purchasing contracts
    •     MM06E002 EXIT_SAPLEINN_001 Customer enhancements for Idocs: contracts
    •     MM06E002 EXIT_SAPLEINN_002 Customer enhancements for Idocs: contracts
    •     MM06E002 EXIT_SAPLEINN_003 Customer enhancements for Idocs: contracts
    14.     BLAREL
    Release order documentation for distributed contracts
    •     MM06E001 EXIT_SAPLEINM_004 Customer enhancements for release documentation inbound
    15.     COND_A
    Conditions: master data for price determination
    •     VKOI0001 EXIT_SAPLVKOI_001 Interchange of Conditions: Inbound Processing Modifications E1KOMG Segment
    •     VKOI0001 EXIT_SAPLVKOI_002 Interchange of Conditions: Inbound Processing Customer Segments
    16.     CREMAS
    Distribute vendor master
    •     VSV00001 EXIT_SAPLKD02_001 Inbound: Read and process vendor segments
    17.     DEBMAS
    Customer master
    •     VSV00001 EXIT_SAPLVV02_001 Inbound: Read and update additional customer master segments
    18.     DELINS
    Delivery schedule/JIT schedule
    •     VED40001 EXIT_SAPLVED4_001 Modify Warnings in Table XVBFS
    •     VED40001 EXIT_SAPLVED4_002 Copying Data to Screens for Incoming EDI Docs
    •     VED40001 EXIT_SAPLVED4_003 Customer-Specific Changes in the Workflow Parameters
    •     VED40001 EXIT_SAPLVED4_004 Determination of mail receiver during inbound processing
    19.     DESADV
    Delivery: Shipping notification
    •     LMELA010 EXIT_SAPLEINM_010 Customer enhancement shipping notification inbound: line item
    •     MM06E001 EXIT_SAPLEINM_006 Customer enhancements for shipping notification inbound
    •     V55K0001 EXIT_SAPLV55K_001 Delivery (inbound): Take data
    •     V55K0002 EXIT_SAPLV55K_002 Delivery (inbound): Prepare processing
    •     V55K0003 EXIT_SAPLV55K_003 Delivery (inbound): Evaluate result
    •     V55K0011 EXIT_SAPLV55K_011 Shipping notification (inbound): Take data
    •     V55K0012 EXIT_SAPLV55K_012 Shipping notification (inbound): Prepare processing
    •     V55K0013 EXIT_SAPLV55K_013 Shipping notification (inbound): Evaluate result
    20.     DOCMAS
    Master document
    •     CVDS0001 EXIT_SAPLCVALE_001 Userexit for ALEDVS (DOCMAS inbound)
    21.     DOLMAS
    Document-object links
    •     CVDS0001 EXIT_SAPLCVALE_003 Userexit for ALEDVS (DOLMAS inbound)
    22.     EDLNOT
    EDL delivery notes
    •     VED40001 EXIT_SAPLVED4_001 Modify Warnings in Table XVBFS
    •     VED40001 EXIT_SAPLVED4_002 Copying Data to screens for Incoming EDI Docs
    •     VED40001 EXIT_SAPLVED4_003 Customer-Specific Changes in the Workflow Parameters
    •     VED40001 EXIT_SAPLVED4_004 Determination of mail receiver during inbound processing
    23.     FIDCC1
    Send entire FI documents (user exit 003/4)
    •     F050S001 EXIT_SAPLF050_002 IDoc inbound: read user-defined IDoc segment
    •     F050S002 EXIT_SAPLF050_004 FIDCC1 IDoc inbound: Change IDoc / do not process
    •     F050S005 EXIT_SAPLF050_008 IDoc inbound: change fields in ACC structures (FI document)
    •     F050S005 EXIT_SAPLF050_009 IDoc inbound: change fields in parked documents
    24.     FIDCC2
    Send entire FI documents (user exit 005/6)
    •     F050S001 EXIT_SAPLF050_002 IDoc inbound: read user-defined IDoc segment
    •     F050S003 EXIT_SAPLF050_006 FIDCC2 IDoc inbound: Change IDoc / do not process
    •     F050S005 EXIT_SAPLF050_008 IDoc inbound: change fields in ACC structures (FI document)
    •     F050S005 EXIT_SAPLF050_009 IDoc inbound: change fields in parked documents
    25.     FIDCMT
    Sending single items for FI-GL
    •     F050S001 EXIT_SAPLF050_002 IDoc inbound: read user-defined IDoc segment
    •     F050S005 EXIT_SAPLF050_008 IDoc inbound: change fields in ACC structures (FI document)
    26.     FINSTA
    Bank Statement
    •     FEDI0005 EXIT_SAPLIEDP_201 FI-EDI: inbound - bank statement/ Lockbox - Final processing
    •     FEDI0005 EXIT_SAPLIEDP_202 FI-EDI: inbound - bank statement/ Lockbox - Processing of segments
    27.     FIROLL
    General ledger rollup for FI-GL (delta f. line items FIDCMT)
    •     F050S001 EXIT_SAPLF050_002 IDoc inbound: read user-defined IDoc segment
    28.     GSVERF
    Cred. memo procedure
    •     VED50001 EXIT_SAPLVED5_001 User Exit for Condition Value Tolerances in the Self- Billing Procedure
    •     VED50001 EXIT_SAPLVED5_005 Customer-Specific Changes in Workflow Parameters
    •     VED50001 EXIT_SAPLVED5_006 Copying Data to Screens for Incoming EDI Docs
    29.     HRMD_A
    HR: Master data and organizational data (appl. system)
    •     RHALE001 EXIT_SAPLRHA0_002 HR-CA: ALE inbound processing: Export parameter
    •     RHALE001 EXIT_SAPLRHAL_002 HR-CA: ALE inbound processing: Change info type data
    •     RHALE001 EXIT_SAPLRHAL_004 HR-CA: ALE inbound processing: conversion segment/ info type
    30.     INFREC
    Purchasing info record
    •     MMAL0004 EXIT_SAPLMEAI_004 ALE source list distribution: inbound processing userdefined data
    •     MMAL0004 EXIT_SAPLMEAI_003 ALE purchasing info record distribution: inbound processing segments
    31.     INVOIC
    Invoice / Billing document
    •     FEDI0001 EXIT_SAPLIEDI_001 FI-EDI: Invoice receipt - Determine G/L account per invoice line
    •     FEDI0001 EXIT_SAPLIEDI_002 FI-EDI: Invoice receipt - Determine add. acct assignm. per line item
    •     FEDI0001 EXIT_SAPLIEDI_003 FI-EDI: Invoice receipt - Fill the screen field 'Allocation'
    •     FEDI0001 EXIT_SAPLIEDI_004 FI-EDI: Invoice receipt - Determine the segment text
    •     FEDI0001 EXIT_SAPLIEDI_005 FI-EDI: Invoice receipt - Determine the name of the BDC session
    •     FEDI0001 EXIT_SAPLIEDI_011 MM-EDI: Invoice receipt - Determine purchase order item
    •     FEDI0001 EXIT_SAPLIEDI_101 FI-EDI: Invoice receipt INVOIC01 - additional assignment
    •     FEDI0001 EXIT_SAPLIEDI_102 FI-EDI: Invoice receipt INVOIC01 - add data
    •     FEDI0001 EXIT_SAPLIEDI_111 MM-EDI: Invoice receipt INVOIC01 - additional assignment
    •     FEDI0001 EXIT_SAPLIEDI_112 MM-EDI: Invoice receipt INVOIC01 - add data
    •     MRMH0002 EXIT_SAPLMRMH_011 Logistics Invoice Verification:inboud EDI message, company code
    •     MRMH0002 EXIT_SAPLMRMH_012 Logistics Invoice Verification:inboud EDI message, control flags
    •     MRMH0002 EXIT_SAPLMRMH_013 Logistics Invoice Verification:inboud EDI message, assignment
    •     MRMH0002 EXIT_SAPLMRMH_014 Logistics Invoice Verification:inboud EDI message, segments
    •     MRMH0002 EXIT_SAPLMRMH_015 Logistics Invoice Verification:inbound EDI message, before posting
    32.     LIKOND
    Listing conditions
    •     WSOR0001 EXIT_SAPLWSOI_001 Enhancement for assortments: inbound IDoc
    33.     MATMAS
    Material Master
    •     MGV00001 EXIT_SAPLMV02_002 Enhancement for material master IDoc: Update
    34.     MRESCR
    Create reservation
    •     SAPLMEWB EXIT_SAPLMEWB_001 Customer exit for processing of reservations via BAPIs
    35.     ORDCHG
    Purchase order/order change
    •     MM06E001 EXIT_SAPLEINM_012 MM EDI ORDERS/ ORDCHG: enhancement configuration
    •     MM06E001 EXIT_SAPLEINM_013 MM EDI ORDERS/ ORDCHG: enhancement configuration
    •     VEDB0001 EXIT_SAPLVEDB_001 SD EDI incoming change orders: read additional data from IDoc
    •     VEDB0001 EXIT_SAPLVEDB_002 SD EDI incoming change orders: additional data for dynpros
    •     VEDB0001 EXIT_SAPLVEDB_003 SD EDI incoming change orders: further activities after calling
    •     VEDB0001 EXIT_SAPLVEDB_004 SD EDI incoming change orders: closing activities per
    •     VEDB0001 EXIT_SAPLVEDB_005 SD EDI incoming change orders: closing activities by order block
    •     VEDB0001 EXIT_SAPLVEDB_006 SD EDI incoming change orders: setting order type
    •     VEDB0001 EXIT_SAPLVEDB_007 SD EDI incoming change orders: additional checks of IDoc
    •     VEDB0001 EXIT_SAPLVEDB_008 SD EDI incoming change orders: error handling
    •     VEDB0001 EXIT_SAPLVEDB_009 SD EDI incoming change orders: additional checks of IDoc segments
    •     VEDB0001 EXIT_SAPLVEDB_010 SD EDI incoming change orders: manipulation of status ecords
    •     VEDB0001 EXIT_SAPLVEDB_012 SD EDI incoming change orders: change internal table
    36.     ORDERS
    Purchase order / order
    •     MCP20008 EXIT_SAPLMCP2_008 User exit: Processing of purchase order header
    •     MCP20008 EXIT_SAPLMCP2_009 User exit: Processing of purchase order item
    37.     ORDERS
    Purchase order / order
    •     MM06E001 EXIT_SAPLEINM_012 MM EDI ORDERS/ ORDCHG: enhancement configuration
    •     MM06E001 EXIT_SAPLEINM_013 MM EDI ORDERS/ ORDCHG: enhancement configuration
    •     VEDA0001 EXIT_SAPLVEDA_001 SD EDI incoming orders: read additional data from IDoc
    •     VEDA0001 EXIT_SAPLVEDA_002 SD EDI incoming orders: additional data for dynpros
    •     VEDA0001 EXIT_SAPLVEDA_003 SD EDI incoming orders: further activities after calling
    •     VEDA0001 EXIT_SAPLVEDA_004 SD EDI incoming orders: closing activities per order
    •     VEDA0001 EXIT_SAPLVEDA_005 SD EDI incoming orders: closing activities by order block
    •     VEDA0001 EXIT_SAPLVEDA_006 SD EDI incoming orders: setting order type
    •     VEDA0001 EXIT_SAPLVEDA_007 SD EDI incoming orders: number of ordering party
    •     VEDA0001 EXIT_SAPLVEDA_008 SD EDI incoming orders: error handling
    •     VEDA0001 EXIT_SAPLVEDA_009 SD EDI incoming orders: additional checks of IDoc segments
    •     VEDA0001 EXIT_SAPLVEDA_010 SD EDI incoming orders: manipulation of status records
    •     VEDA0001 EXIT_SAPLVEDA_011 SD EDI incoming orders: change internal table
    •     WVFB0001 EXIT_SAPLWVFB_002 Customer exists for store order PO confirmationdata seg.
    38.     ORDRSP
    Purchase order / order confirmation
    •     MM06E001 EXIT_SAPLEINM_005 Customer enhancements for order confirmation inbound
    •     MM06E001 EXIT_SAPLEINM_007 Customer enhancements inbound confirmation: reading
    •     MM06E001 EXIT_SAPLEINM_008 Customer enhancements inbound confirmation: final
    •     WVMI0001 EXIT_SAPLWVMI_003 ORDRSP VMI inbound, modification before creating purchase order
    39.     PORDCR
    Create purchase order
    •     SAPLMEWP EXIT_SAPLMEWP_002 Customer exit for processing of purchase orders via BAPIs
    40.     PREQCR
    Create purchase requisition
    •     SAPLMEWQ EXIT_SAPLMEWQ_001 Customer exit for processing of requisitions via BAPIs
    41.     PROACT
    Stock and sales data
    •     WVMI0001 EXIT_SAPLWVMI_002 IDoc PROACT inbound: prior to processing
    42.     REMADV
    Payment advice
    •     FEDI0002 EXIT_SAPLIEDP_101 FI-EDI: Incoming pmnt advice - Extended allocatn of IDOC -> applicatn data
    •     FEDI0002 EXIT_SAPLIEDP_102 FI-EDI: Incoming pmnt adivce - Closing allocatn of IDOC -> applicatn data
    43.     REQOTE
    Inquiry
    •     VEDQ0001 EXIT_SAPLVEDQ_001 SD EDI inbound inquiry: read additional data from IDoc
    •     VEDQ0001 EXIT_SAPLVEDQ_002 SD EDI inbound inquiry: additional data for dynpros
    •     VEDQ0001 EXIT_SAPLVEDQ_003 SD EDI inbound inquiry: further activities after calling
    •     VEDQ0001 EXIT_SAPLVEDQ_004 SD EDI inbound inquiry: closing activities per inquiry
    •     VEDQ0001 EXIT_SAPLVEDQ_005 SD EDI inbound inquiry: closing activities by inquiry block
    •     VEDQ0001 EXIT_SAPLVEDQ_006 SD EDI inbound inquiry: setting inquiry type
    •     VEDQ0001 EXIT_SAPLVEDQ_007 SD EDI inbound inquiry: number of sold-to party
    •     VEDQ0001 EXIT_SAPLVEDQ_008 SD EDI inbound inquiry: error handling
    •     VEDQ0001 EXIT_SAPLVEDQ_009 SD EDI inbound inquiry: additional checks of IDoc segments
    •     VEDQ0001 EXIT_SAPLVEDQ_010 SD EDI inbound inquiry: manipulation of status records
    •     VEDQ0001 EXIT_SAPLVEDQ_011 SD EDI inbound inquiry: change internal table
    44.     SBINV
    Credit memo procedure with invoice creation
    •     VED50001 EXIT_SAPLVED5_002 User Exit for messages in the Self-Billing Procedure SBINV
    •     VED50001 EXIT_SAPLVED5_003 User Exit for Tolerances in the Self- Billing Procedure SBINV
    •     VED50001 EXIT_SAPLVED5_004 Customer-Function for changing invoice data SBINV
    •     VED50001 EXIT_SAPLVED5_005 Customer-Specific Changes in Workflow Parameters
    •     VED50001 EXIT_SAPLVED5_006 Copying Data to Screens for Incoming EDI Docs
    45.     SDPACK
    Packing confirmation
    •     VMDE0001 EXIT_SAPLVMDE_001 Shipping Interface: Error Handling -  Inbound IDoc
    •     VMDE0004 EXIT_SAPLVMDE_004 Shipping Interface: Message SDPACK (Packing, Inbound)
    46.     SDPICK
    Picking confirmation
    •     VMDE0001 EXIT_SAPLVMDE_001 Shipping Interface: Error Handling -  Inbound IDoc
    •     VMDE0003 EXIT_SAPLVMDE_003 Shipping Interface: Message SDPICK (Picking, Receipt)
    47.     SHP_IBDLV_CONFIRM_DECENTRAL
    Confirmation (Inbound Delivery)
    •     V50B0001 EXIT_SAPLV50I_002 User exit for BAPI Verification of Inbound Deliveries
    48.     SHP_IBDLV_SAVE_REPLICA
    BAPI Function Module for Duplication of Outbound Deliveries
    •     V50B0001 EXIT_SAPLV50I_001 User exit for BAPI Duplication of Inbound Deliveries
    49.     SHP_OBDLV_CONFIRM_DECENTRAL
    Confirmation (Customer Delivery)
    •     V50B0001 EXIT_SAPLV50I_004 User exit for BAPI Verification of Outbound Deliveries
    50.     SHP_OBDLV_SAVE_REPLICA
    BAPI Function Module for Duplication of Outbound Deliveries
    •     V50B0001 EXIT_SAPLV50I_003 User exit for BAPI Duplication of Outbound Deliveries
    51.     SHPCON
    Delivery: Shipping confirmation
    •     V55K0001 EXIT_SAPLV55K_001 Delivery (inbound): Take data
    •     V55K0002 EXIT_SAPLV55K_002 Delivery (inbound): Prepare processing
    •     V55K0003 EXIT_SAPLV55K_003 Delivery (inbound): Evaluate result
    •     V55K0011 EXIT_SAPLV55K_011 Shipping notification (inbound): Take data
    •     V55K0012 EXIT_SAPLV55K_012 Shipping notification (inbound): Prepare processing
    •     V55K0013 EXIT_SAPLV55K_013 Shipping notification (inbound): Evaluate result
    52.     SHPMNT
    Shipping outbound
    •     V55K0020 EXIT_SAPLV55K_020 IDoc SHPMNT: Modification Control/ Data before processing
    •     V55K0021 EXIT_SAPLV55K_021 Processing of segments IDoc SHPMNT
    •     V55K0022 EXIT_SAPLV55K_022 Update of user defined tables for inbound IDoc SHPMNT
    53.     SRCLST
    Source List
    •     MMAL0002 EXIT_SAPLMEAI_001 ALE source list distribution: inbound processing segments
    •     MMAL0002 EXIT_SAPLMEAI_002 ALE source list distribution: inbound processing user defined data
    54.     SRVMAS
    Master data service master
    •     BASI0001 EXIT_SAPLBASI_001 Userexit IDoc inbound service master: segment
    •     BASI0001 EXIT_SAPLBASI_002 Userexit IDoc inbound service master: database
    55.     TPSSHT
    Shipping planning system: Transfer planned shipments
    •     V56I0010 EXIT_SAPLV56I_010 IDoc TPSSHT01: Input of planned shipments: Modification of IDoc segments
    •     V56I0010 EXIT_SAPLV56I_011 IDoc TPSSHT01: Input of planned shipments: modification of transport tab, processing
    •     V56I0010 EXIT_SAPLV56I_012 IDoc TPSSHT01: Input of planned shipments: update of own tables
    56.     WHSCON
    Delivery: Stock confirmation
    •     V55K0001 EXIT_SAPLV55K_001 Delivery (inbound): Take data
    •     V55K0002 EXIT_SAPLV55K_002 Delivery (inbound): Prepare processing
    •     V55K0003 EXIT_SAPLV55K_003 Delivery (inbound): Evaluate result
    •     V55K0011 EXIT_SAPLV55K_011 Shipping notification (inbound): Take data
    •     V55K0012 EXIT_SAPLV55K_012 Shipping notification (inbound): Prepare processing
    •     V55K0013 EXIT_SAPLV55K_013 Shipping notification (inbound): Evaluate result
    57.     WMBBIN
    Block Storage Bins
    •     MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
    •     MWMIDI04 EXIT_SAPLLIDI_004 Customer enhancement for IDoc WMBBID01
    58.     WMCATO
    Reversal/Reversal request for transfer order
    •     MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
    •     MWMIDI03 EXIT_SAPLLIDI_003 Customer enhancement for IDoc WMCAI01
    59.     WMINVE
    Inventory count input
    •     MWMIDO07 EXIT_SAPLLMDE_001 Customer enhancement for error handling of inbound IDoc
    •     MWMIDO09 EXIT_SAPLLMDE_003 Customer enhancement for message WMINVE
    •     MWMIDO07 EXIT_SAPLLMDE_001 Customer enhancement for error handling of inbound IDoc
    60.     WMMBXY
    IDoc Report goods movements in IM
    •     MWMIDO08 EXIT_SAPLLMDE_002 Customer enhancement for message WMMBXY (goods movement) inbound
    61.     WMSUMO
    Move storage unit
    •     MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
    •     MWMIDI06 EXIT_SAPLLIDI_006 Customer enhancement for IDoc WMSUID01
    62.     WMTOCO
    Transfer order
    •     MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
    •     MWMIDI02 EXIT_SAPLLIDI_002 Customer enhancement for IDoc WMTCID01
    63.     WMTORD
    Transfer order
    •     MWMIDO07 EXIT_SAPLLMDE_001 Customer enhancement for error handling of inbound IDoc
    •     MWMIDO10 EXIT_SAPLLMDE_004 Customer enhancement for message WMTORD (Create TO) inbound
    •     MWMIDO11 EXIT_SAPLLMDE_005 Customer enhancement for message WMTORD (Create TO) inbound
    64.     WMTREQ
    Create/Cancel transfer order
    •     MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
    •     MWMIDI05 EXIT_SAPLLIDI_005 Customer enhancement for IDoc WMTRID01
    65.     WPUBON
    POS interface: Upload sales documents (compressed)
    •     WPUE0002 EXIT_SAPLWPUE_104 IDoc WPUBON01: prior to inbound processing
    •     WPUE0002 EXIT_SAPLWPUE_105 Check, whether transaction of IDoc WPUBON01 is compressable
    •     WPUE0002 EXIT_SAPLWPUE_106 IDoc WPUBON01: processing user segment
    •     WPUE0002 EXIT_SAPLWPUE_109 IDoc WPUBON01: after to inbound processing
    66.     WPUFIB
    POS interface: Upload Fin.Acc. interface SRS/POS
    •     WPUE0002 EXIT_SAPLWPUE_130 IDoc WPUFIB01: prior to update
    •     WPUE0002 EXIT_SAPLWPUE_131 IDoc WPUFIB01: processing user
    67.     WPUFIB
    POS interface: Upload Fin.Acc. interface SRS/POS
    •     WPUE0002 EXIT_SAPLWPUE_132 IDoc WPUFIB01: prior to inbound processing
    •     WPUE0002 EXIT_SAPLWPUE_139 IDoc WPUFIB01: after to inbound processing
    68.     WPUKSR
    POS upload cashier data
    •     WPUE0002 EXIT_SAPLWPUE_120 IDoc WPUKSR01: prior to update
    •     WPUE0002 EXIT_SAPLWPUE_122 IDoc WPUKSR01: processing user segment
    •     WPUE0002 EXIT_SAPLWPUE_123 IDoc WPUKSR01: prior to inbound processing
    •     WPUE0002 EXIT_SAPLWPUE_129 IDoc WPUKSR01: after to inbound processing
    •     WPUE0002 EXIT_SAPLWPUE_152 IDoc WPUTAB01: prior to inbound processing
    •     WPUE0002 EXIT_SAPLWPUE_159 IDoc WPUTAB01: after to inbound processing
    69.     WPUUMS
    POS interface: Upload sales data (compressed)
    •     WPUE0002 EXIT_SAPLWPUE_110 IDoc WPUUMS01: prior to update
    •     WPUE0002 EXIT_SAPLWPUE_112 IDoc WPUUMS01: prior to inbound processing
    •     WPUE0002 EXIT_SAPLWPUE_113 IDoc WPUUMS01: processing user segment
    •     WPUE0002 EXIT_SAPLWPUE_119 IDoc WPUUMS01: after to inbound processing
    70.     WPUWBW
    POS interface: Upload goods movements
    •     WPUE0002 EXIT_SAPLWPUE_140 IDoc WPUWBW01: prior to update
    •     WPUE0002 EXIT_SAPLWPUE_141 IDoc WPUWBW01: processing user segment
    •     WPUE0002 EXIT_SAPLWPUE_142 IDoc WPUWBW01: prior to inbound processing
    •     WPUE0002 EXIT_SAPLWPUE_149 IDoc WPUWBW01: after to inbound processing
    71.     WVINVE
    Store physical inventory / sales price revaluation
    •     WVFI0001 EXIT_SAPLWVFI_001 Inbound IDoc store phys. inv.: override Customizing
    •     WVFI0002 EXIT_SAPLWVFI_002 Inbound IDoc store phys. inv.: process customer segment
    <b>IDoc Outbound User Exits</b>
    72.     ACCONF
    Confirmation of IDoc processing from the application
    •     ACCID002 EXIT_SAPLACC2_040 IDOC ACCONF: Confirmation of processing in application
    73.     ACLPAY
    Accounting: Inbound invoice
    •     ACCID002 EXIT_SAPLACC2_030 IDoc ACLPAY: Userexit for header in accounting document (outbound)
    •     ACCID002 EXIT_SAPLACC2_031 IDoc ACLPAY: Userexit for creditor line (outbound) in accounting document
    •     ACCID002 EXIT_SAPLACC2_032 IDoc ACLPAY: Userexit for general line (outbound) in accounting document
    •     ACCID002 EXIT_SAPLACC2_033 IDoc ACLPAY: Userexit for tax line (outbound) in accounting document
    74.     ACPJMM
    Posting in accounting from materials management
    •     ACCID002 EXIT_SAPLACC2_020 IDoc ACPJOU: Userexit Userexit for GL posting header in accounting document
    •     ACCID002 EXIT_SAPLACC2_021 IDoc ACPJOU: Userexit Userexit for GL posting line in accounting document
    75.     ARTMAS
    Create and change of material master (Retail)
    •     MGV00003 EXIT_SAPLMV01_003 Enhancement for article master IDoc: Create
    76.     BLAORD
    Purchasing contracts
    •     MM06E001 EXIT_SAPLEINM_016 ALE distribution of contracts outbound enhancement for IDocs
    •     MM06E001 EXIT_SAPLEINM_017 ALE distribution of contracts outbound enhancement for IDocs
    77.     BLAREL
    Purchasing contracts
    •     MM06E001 EXIT_SAPLEINM_003 Customer enhancements of data segment for outbound release documentation
    78.     COND_A
    Conditions: master data for price determination
    •     VKOE0001 EXIT_SAPLVKOE_001 Condition Transmission: Derivation of Filter Object E1KOMG
    •     VKOE0001 EXIT_SAPLVKOE_002 Condition Transmission: Customer segments
    79.     CREMAS
    Distribute vendor master
    •     VSV00001 EXIT_SAPLKD01_001 Outbound: Create vendor segments
    80.     DEBMAS
    Customer master
    •     VSV00001 EXIT_SAPLVV01_001 Outbound: Create additional customer master segments
    81.     DELPKB
    KANBAN call
    •     MPKD0001 EXIT_SAPLMPKD_001 User exit for control record KANBAN, outbound
    •     MPKD0001 EXIT_SAPLMPKD_002 User exit for EDI
    82.     DIRDEB
    Preauthorized withdrawal
    •     FEDI0003 EXIT_SAPLIEDP_003 FI-EDI outgoing payments: Save PEXR segments (customer directory)
    83.     DOCMAS
    Master document
    •     CVDS0001 EXIT_SAPLCVALE_002 Userexit for ALEDVS (DOCMAS outbound)
    •     CVDS0001 EXIT_SAPLCVALE_005 Userexit for filter (ALE outbound)
    84.     DOLMAS
    Document-object links
    •     CVDS0001 EXIT_SAPLCVALE_004 Userexit for ALEDVS (DOLMAS outbound)
    •     CVDS0001 EXIT_SAPLCVALE_005 Userexit for filter (ALE outbound)
    85.     FIDCC1
    Send entire FI documents (user exit 003/4)
    •     F050S001 EXIT_SAPLF050_001 IDoc outbound: fill user-defined IDoc segment
    •     F050S002 EXIT_SAPLF050_003 FIDCC1 IDoc outbound: Change data / do not send
    •     F050S004 EXIT_SAPLF050_007 IDoc outbound: change complete IDoc / do not send
    86.     FIDCC2
    Send entire FI documents (user exit 005/6)
    •     F050S001 EXIT_SAPLF050_001 IDoc outbound: fill user-defined IDoc segment
    •     F050S003 EXIT_SAPLF050_005 FIDCC2 IDoc outbound: Change data / do not send
    •     F050S004 EXIT_SAPLF050_007 IDoc outbound: change complete IDoc / do not send
    •     F050S001 EXIT_SAPLF050_001 IDoc outbound: fill user-defined IDoc segment
    87.     FIDCMT
    Sending single items for FI-GL
    •     F050S004 EXIT_SAPLF050_007 IDoc outbound: change complete IDoc / do not send
    88.     FIPAYM
    Payment data
    •     FIPAYM01 EXIT_SAPLF11A_001 USER-EXIT: message type FIPAYM, header data, outbound
    •     FIPAYM01 EXIT_SAPLF11A_002 USER-EXIT: message type FIPAYM, reference data, outbound
    •     FIPAYM01 EXIT_SAPLF11A_003 USER-EXIT: message type FIPAYM, bank data, outbound
    •     FIPAYM01 EXIT_SAPLF11A_004 USER-EXIT: message type FIPAYM, GL data, outbound
    •     FIPAYM01 EXIT_SAPLF11A_005 USER-EXIT: message type FIPAYM, partner data, outbound
    89.     FIROLL
    General ledger rollup for FI-GL (delta f. line items FIDCMT)
    •     F050S001 EXIT_SAPLF050_001 IDoc outbound: fill user-defined IDoc segment
    90.     GSVERF
    Cred. memo procedure
    •     MRMN0001 EXIT_SAPLMRMN_001 Outbound IDoc for ERS/consignment settlement
    91.     HRMD_A
    HR: Master data and organizational data (appl. system)
    •     RHALE001 EXIT_SAPLRHA0_001 HR-CA: ALE outbound processing: Enhancement for receiver
    •     RHALE001 EXIT_SAPLRHAL_001 HR-CA: ALE outbound processing: Change IDoc
    •     RHALE001 EXIT_SAPLRHAL_003 HR-CA: ALE outbound processing: conversion info type / segment
    92.     INFREC
    Purchasing info record
    •     MMAL0003 EXIT_SAPLMEAO_002 ALE purchasing info record distribution: outbound processing
    93.     INVOIC
    Invoice / Billing document
    •     LVEDF001 EXIT_SAPLVEDF_001 User_Exit controll data IDoc_Output_Invoic
    •     LVEDF001 EXIT_SAPLVEDF_002 User_Exit customer enhancement of segments outbound invoice
    •     LVEDF001 EXIT_SAPLVEDF_003 User_Exit to avoid reading package data
    •     LVEDF001 EXIT_SAPLVEDF_004 EDI Invoice: customer enhancement for reading additional data
    94.     KANBAN
    KANBAN call
    •     MPKD0001 EXIT_SAPLMPKD_001 User exit for control record KANBAN, outbound
    •     MPKD0001 EXIT_SAPLMPKD_002 User exit for EDI
    95.     LIKOND
    Listing conditions
    •     WSOR0001 EXIT_SAPLWSOE_001 Enhancement for assortments: outbound IDoc
    96.     MATMAS
    Material Master
    •     MGV00001 EXIT_SAPLMV01_002 Enhancement for material master IDoc: Create
    97.     ORDCHG
    Purchase order/order change
    •     MM06E001 EXIT_SAPLEINM_001 Customer enhancements for control record: purchasing document, outbound
    •     MM06E001 EXIT_SAPLEINM_002 Customer enhancements to data segments, purchasing document, outbound
    •     MM06E001 EXIT_SAPLEINM_011 Final customer enhancement EDI purchase order outbound
    98.     ORDERS
    Purchase order / order
    •     MM06E001 EXIT_SAPLEINM_001 Customer enhancements for control record: purchasing document, outbound
    •     MM06E001 EXIT_SAPLEINM_002 Customer enhancements to data segments, purchasing document, outbound
    •     MM06E001 EXIT_SAPLEINM_011 Final customer enhancement EDI purchase order outbound
    99.     ORDRSP
    Purchase order / order confirmation
    •     MM06E001 EXIT_SAPLEINM_009 MM EDI ORDRSP: customer enhancements tolerances (quantities/ date/price)
    •     MM06E001 EXIT_SAPLEINM_014 MM EDI ORDRSP:enhancement price tolerances
    •     MM06E001 EXIT_SAPLEINM_015 MM EDI ORDRSP: enhancement change of vendor material
    •     SDEDI001 EXIT_SAPLVEDC_001 Customer enhancement for control record of order confirmation
    •     SDEDI001 EXIT_SAPLVEDC_002 Customer enhancement for data records of order confirmation
    •     SDEDI001 EXIT_SAPLVEDC_003 SD EDI ORDRSP: customer enhancement
    •     SDEDI001 EXIT_SAPLVEDC_004 SD EDI ORDRSP:customer enhancement for reading additional data
    •     SDEDI001 EXIT_SAPLVEDC_005 SD EDI ORDRSP: customer enhancement for configuration
    •     SDEDI001 EXIT_SAPLVEDC_006 SD EDI ORDRSP: customer enhancement for configuration structures
    •     SDEDI001 EXIT_SAPLVEDC_007 SD EDI ORDRSP: customer enhancement for header conditions
    •     SDEDI001 EXIT_SAPLVEDC_008 SD EDI ORDRSP: customer enhancement for item conditions
    •     WVFB0001 EXIT_SAPLWVFB_001 Customer exists for store order PO confirmation control seg.
    •     WVFB0001 EXIT_SAPLWVFB_003 Customer exists for store order PO confirmation data seg.
    100.     PAYEXT
    Extended payment order
    •     FEDI0003 EXIT_SAPLIEDP_002 FI-EDI outgoing payments: Save PEXR segments (external payments)
    •     FEDI0004 EXIT_SAPLIEDP_901 FI-EDI outgoing payments: New partner house bank
    •     FEDI0004 EXIT_SAPLIEDP_902 FI-EDI outgoing payments: End of IDoc payment (VBLNR)
    •     FEDI0004 EXIT_SAPLIEDP_903 FI-EDI outgoing payments: End of partner house bank
    101.     PICKSD
    Picking data confirmation to customer delivery
    •     VMDE0002 EXIT_SAPLVMDE_002 Shipping Interface: Message PICKSD (Picking, Outbound)
    102.     PRDCAT
    Product Catalog
    •     WPCI0001 EXIT_SAPLWPCI_001 User exit for Product cat. IDoc outbound
    103.     PRDPOS
    Product catalog item
    •     WPCI0001 EXIT_SAPLWPCI_001 User exit for Product cat. IDoc outbound
    104.     PRICAT
    Price list / catalog
    •     VPRE0001 EXIT_SAPLVPRE_001 PRICAT outbound processing (MAMT AUSP MAW1)
    •     VPRE0001 EXIT_SAPLVPRE_002 PRICAT outbound processing (control record)
    •     VPRE0001 EXIT_SAPLVPRE_003 PRICAT outbound processing (IDoc segments)
    105.     PROACT
    Stock and sales data
    •     WVMI0001 EXIT_SAPLWVMI_001 IDoc PROACT outbound: final action prior to sending
    106.     REMADV
    Payment advice
    •     FEDI0003 EXIT_SAPLIEDP_001 FI-EDI: Outgoing pmnt advice - Create extension of segments/ new segments
    107.     REQOTE
    Inquiry
    •     VEDE0001 EXIT_SAPLVEDE_001 Customer enhancement for control record of outbound quotation
    •     VEDE0001 EXIT_SAPLVEDE_003 SD EDI REQOTE: customer enhancement
    •     VEDE0001 EXIT_SAPLVEDE_002 Customer enhancement for data records of outbound quotation
    •     VEDE0001 EXIT_SAPLVEDE_004 SD EDI REQOTE: customer enhancement for reading additional data
    •     VEDE0001 EXIT_SAPLVEDE_005 SD EDI REQOTE: customer enhancement for configuration
    •     VEDE0001 EXIT_SAPLVEDE_006 SD EDI REQOTE: customer enhancement for configuration structures
    •     VEDE0001 EXIT_SAPLVEDE_007 SD EDI REQOTE: customer enhancement for header conditions
    •     VEDE0001 EXIT_SAPLVEDE_008 SD EDI REQOTE: customer enhancement for item conditions
    108.     SRCLST
    Source List
    •     MMAL0001 EXIT_SAPLMEAO_001 ALE source list distribution: outbound processing
    109.     SRVMAS
    Master data service master
    •     BASO0001 EXIT_SAPLBASO_001 Enhancement: service master, check standard service catalog
    •     BASO0001 EXIT_SAPLBASO_002 Userexit IDoc service master: receiver determination
    110.     SYPART
    Partner profiles
    •     SIDOC002 EXIT_SAPLEDI6_001 CA-EDI, Partner-IDoc: Exit after segment E1EDPP1
    •     SIDOC002 EXIT_SAPLEDI6_002 CA-EDI, Partner-IDoc: Exit after segment E1ADRM0
    •     SIDOC002 EXIT_SAPLEDI6_003 CA-EDI, Partner-IDoc: Final exit before sending
    •     SIDOC002 EXIT_SAPLEDI6_004 CA-EDI, Partner-IDoc: Exit after segment E1ADRP0
    •     SIDOC002 EXIT_SAPLEDI6_005 CA-EDI, Partner-IDoc: Exit after segment E1ADRE0
    •     SIDOC002 EXIT_SAPLEDI6_007 CA-EDI, Partner-IDoc: Exit after segment E1EDP13
    •     SIDOC002 EXIT_SAPLEDI6_008 CA-EDI, Partner-IDoc: Exit after segment E1EDP21
    111.     TPSDLS
    Shipping planning system: Transfer delivery
    •     V56I0001 EXIT_SAPLV56I_001 IDoc TPSDLS: Modification of delivery header group
    •     V56I0002 EXIT_SAPLV56I_002 IDoc TPSDLS: Modification of delivery item group
    •     V56I0003 EXIT_SAPLV56I_003 IDoc TPSDLS: Modification of package data group
    •     V56I0004 EXIT_SAPLV56I_004 IDoc TPSDLS: Modification of entire IDoc
    •     V56I0005 EXIT_SAPLV56I_005 IDoc TPSDLS: Modif. of delivery items relevant to shipment
    •     V56I0006 EXIT_SAPLV56I_006 IDOC TPSDLS: User-defined determ. for location substitution
    •     V56I0020 EXIT_SAPLV56I_020 IDoc control record modification in interface SD-TPS
    112.     WBBDLD
    Assortment list: Material data
    •     WBBE0001 EXIT_SAPLWBBI_001 Modification of replenishment list IDoc
    113.     WMCATO
    Reversal/Reversal request for transfer order
    •     MWMIDO02 EXIT_SAPLLIDO_002 Customer enhancement for IDoc WMCAID01
    114.     WMINVE
    Inventory count input
    •     MWMIDO04 EXIT_SAPLLIDO_004 Customer enhancement for IDoc WMIVID01
    115.     WMRREF
    Release reference number
    •     MWMIDO03 EXIT_SAPLLIDO_003 Customer enhancement for IDoc WMRRID01
    116.     WMTORD
    Transfer order
    •     MWMIDO01 EXIT_SAPLLIDO_001 Customer enhancement for IDoc WMTOID01
    117.     WP_EAN
    POS interface: Upload / Download EAN assignments
    •     WPDA0001 EXIT_SAPLWPDA_003 POS interface: Modification of IDoc data for EAN references
    118.     WP_PER
    POS interface: Upload / Download person data
    •     WPDA0001 EXIT_SAPLWPDA_008 POS interface: Modification of IDoc data for person related data
    •     WPDA0001 EXIT_SAPLWPDA_013 POS interface: Add. Change pt. Analysis for WP_PER
    119.     WP_PLU
    POS interface: Upload / Download material master
    •     WPDA0001 EXIT_SAPLWPDA_002 POS interface: Modification of IDoc data for material master
    •     WPDA0001 EXIT_SAPLWPDA_009 POS interface: Add. Change pt. Analysis for WP_PLU
    120.     WPDCUR
    POS interface: Download exchange rates
    •     WPDA0001 EXIT_SAPLWPDA_006 POS interface: Modification of IDoc data for exchange rates
    121.     WPDNAC
    POS interface: Download products
    •     WPDA0001 EXIT_SAPLWPDA_005 POS interface: Modification of IDoc data for follow-on items
    •     WPDA0001 EXIT_SAPLWPDA_011 POS interface: Add. Change pt. Analysis for WPDNAC
    122.     WPDSET
    POS interface: Download set assignments
    •     WPDA0001 EXIT_SAPLWPDA_004 POS interface: modification of IDoc data for set assignments
    123.     WPDSET
    POS interface: Download set assignments
    •     WPDA0001 EXIT_SAPLWPDA_010 POS interface: Add. Change pt. Analysis for WPDSET
    124.     WPDTAX
    POS interface: Download tax rates
    •     WPDA0001 EXIT_SAPLWPDA_007 POS interface: modification of IDoc data for taxes
    125.     WPDWGR
    POS interface: Download material group master
    •     WPDA0001 EXIT_SAPLWPDA_001 POS interface: Modification of IDoc data for material groups
    •     WPDA0001 EXIT_SAPLWPDA_012 POS interface: Add. Change pt. Analysis for WPDWGR
    126.     WPUBON
    POS interface: Upload sales documents (compressed)
    •     WPUE0002 EXIT_SAPLWPUE_102 IDoc WPUBON01: prior to update
    127.     WTADDI
    Additionals
    •     WTAD0001 EXIT_SAPLWTIP_001 Enhancements to Additionals IDoc
    128.     WTADDI_CVB1
    Additionals w/o 06
    •     WTAD0001 EXIT_SAPLWTIP_001 Enhancements to Additionals IDoc
    General IDoc User Exits
    •     ALE00001 EXIT_RBDPROSE_001 Old: exit for converting preproduction system to production
    •     ALE00001 EXIT_SAPLBD11_001 User exit for the IDOC version changer
    •     BDMO0001 EXIT_SAPLBDMO_001 Old: Enhancement to the ALE distribution reference model
    •     KKCD0001 EXIT_SAPFKCIM_001 SAP-EIS: User exit for data compression of sender records (used for IDoc conversion)
    •     KKCD0001 EXIT_SAPFKCIM_002 SAP-EIS: User exit for data summ. Of summarized records befo (used for IDoc conversion)
    ===
    User exits for Pricing.
    1.•USEREXIT_PRICING_PREPARE_TKOMK (module pool SAPLV60A, program RV60AFZZ
    2.•USEREXIT_PRICING_PREPARE_TKOMP (module pool SAPLV60A, program RV60AFZZ)
    3.•USEREXIT_FIELD_MODIFICATION
    4.•USEREXIT_FIELD_MODIFIC_KZWI
    5.•USEREXIT_FIELD_MODIFIC_KOPF
    User exits for Sales order
    1•USEREXIT_DELETE_DOCUMENT
    2•USEREXIT_FIELD_MODIFICATION
    3.•USEREXIT_MOVE_FIELD_TO_VBAK
    4.•USEREXIT_NUMBER_RANGE
    5.•USEREXIT_SAVE_DOCUMENT
    User exits for billing
    1.•USEREXIT_ACCOUNT_PREP_KOMKCV (Module pool SAPLV60A, program RV60AFZZ)
    2.•USEREXIT_ACCOUNT_PREP_KOMPCV
    3•USEREXIT_NUMBER_RANGE_INV_DATE (Module pool SAPLV60A, program RV60AFZC)
    4•USEREXIT_PRINT_ITEM (Module pool SAPLV61A, program RV61AFZB
    5.USEREXIT_PRINT_HEAD (Modulpool SAPLV61A, Programm RV61AFZB)
    ====
    Reward if USeful
    Thanx & regards
    Naren..

  • GL Account User Exit for all FI transactions

    Hi Experts,
    We  have to create a Ztable and it stores GL bank account principal amount.
    Ex: 130121 (SCB Bank) - Rs.10,00,000.00
    In SAP , for the same GL account closing balances will available in FS10N of each month.
    Ex: 130121 (SCB Bank) for Sep'09 - Rs.8,50,000.00
    Now, the requirement is..
    I want to put an User Exit for this Bank GL Account . It has to perform a check operation whenever this GL accounts comes for posting on any FI transactions, and
    it'll check each time to the GL account principal balances(from Ztable) with the posting amounts and give a popup message regarding about the bank limits exceeded, remainaing amounts and then only they can able to post the transactions.
    Ex: If they are posting in F-02 (general ledger posting) the amount showing in GL account which go for my user exit calculations everytime and the same will be for all other FI GL transactions.
    Hope u understood else pls let me know by your replies.
    Pls advise.
    thanks & regards
    sankar.

    Hi..
    In the tcode where u want to put the user exit, In the menu select System--> Status and double click on the program.
    Then click on search and give the search term as "call-customer function".. and see if there are any available user exits..
    Select one, and double click on the 3 number..if '003' ,double click on it,it will take u to the Fm..where u will find an include starting with Z.
    Here u can write the code u want.
    Regards,
    Vishwa.

  • BADI / USER-EXIT FOR DEFAULTING THE FIELD VTTK-TNDR_ACTC IN TCODE VT01N

    Hi,
    I require a BADI / USER-EXIT for defaulting the field VTTK-TNDR_ACTC(Currency of Actual Shipment costs) to 'EUR' in transaction VT01N(Shipment Transaction) .
    Please could anyone help me with this .
    Regards,
    Sushanth H.S.

    Hi!
    User Exits in Transportation
    In Transportation, there are enhancements that you can use with transaction CMOD.
    For a detailed description of the individual enhancements, see the documentation on the individual enhancements or function modules in transaction SMOD.
    You can display all enhancements that are available for the area of transportation by choosing F4 in the Enhancement field. Enter V56* in the Enhancement field and choose Execute. Enter V54* to get a list of all enhancements for the area of shipment cost processing.
    Business Add-Ins in the transports
    Business add-ins (BADIs) are predefined user exits. They enable businesses, partners, and customers to add additional softward to the SAP source code. The linkup of SAP's New Dimension Products, such as APO and BW, to the standard system is thus possible.
    Customer-specific functions can be executed before the save time and after the database update.
    The following methods are available for the BADI with the definition name 'BADI_LE_SHIPMENT':
    AT_SAVE: BADI is called up at the time of the save. Checks and return to dialog are possible.
    BEFORE:_UPDATE: BADI is called up right before the data is saved to the database, that is, when all the data is available (for example, internal ly assigned shipment number).
    IN_UPDATE: BADI is called up after the database update.
    Standard Settings
    Creating a BADI method:
    Call up transaction SE19. Enter a name of your choice. Choose "create" and in the dialog box enter the definition name 'BADI_LE_SHIPMENT'. Afterwards, enter a short text for implementation. Save the BADI.
    On the tab page 'Interface', choose the method for implementation by double-clicking on it. Now you can enter your customer-specific program code. Save and activate the code. You can acess the transmission parameters entered in the BADI definition. With the method ***_AT_SAVE you can initiate the exception ERROR_WITH_MESSAGE (description 'An error message has occurred' ) if you wish to return to the dialog.
    Afterwards, go to the heading and activate the interface.
    Regards
    Tamá

  • How to find user exits for a specific field

    hi,
        How can we find a user exit for a specific fields .
    as i know Three ways to search user-exits
    1. SE80 look includes in a packages with name user-exits
    2.  by zreport which will fetch user-exit in a T-CODE
    3. SMOD
    but what if we have to find a user-exit for particular field for e.g bupla(bussiness place) in MIRO.
    Please suggest me.
    Thanks and  Regards ,
    Rahul Singh.

    Hi Rahul,
    Here is the procedure to create field exits.
    Step by step procedure for creating Field Exits
    There are eight steps to creating a field exit:
    Step 1: Determine Data Element
    Step 2: Go To Field Exit Transaction
    Step 3: Create Field Exit
    Step 4: Create Function Module
    Step 5: Code Function Module
    Step 6: Activate Function Module
    Step 7: Assign Program/Screen
    Step 8: Activate Field Exit
    Step 1: Determine Data Element
    u2022     Before you can begin adding the functionality for a field exit, you must know the corresponding data element.
    Step 2: Go To Field Exit Transaction
    u2022     The transaction to create field exits is CMOD.
    u2022     You can use the menu path Tools -> ABAP/4 Workbench -> Utilities -> Enhancements -> Project management.
    u2022     From the initial screen of transaction CMOD, choose the Text enhancements -> Field exits menu path.
    u2022     After choosing this menu path, you will be taken to the field exits screen. From here, you can create a field exit.
    NOTE : Even though you use transaction CMOD to maintain field exits, you do not need to create a project to activate field exits.
    Step 3: Create Field Exit
    u2022     From the field exit screen of transaction CMOD, choose the Field exit -> Create menu path.
    u2022     After choosing this menu path, a dialog box will prompt you for the appropriate data element .
    u2022     Enter the data element name and click the u2018Continueu2019 pushbutton.
    u2022     Now, you will be able to create the function module associated to the data elementu2019s field exit.
    Step 4: Create Function Module
    u2022     You will automatically be taken to the Function Library (SE37) after entering a data element name and clicking the u2018Continueu2019 pushbutton.
    u2022     In the u2018Function moduleu2019 field, a function module name will be defaulted by the system based on the data element specified. This name will have the following convention:
    FIELD_EXIT_<data element>
    u2022     You can add an identifier (an underscore followed by a single character ).
    u2022     The first function module for a data elementu2019s field exit must be created without an identifier.
    u2022     To create the function module, click on the u2018Createu2019 pushbutton, choose menu path Function module -> Create, or press u2018F5u2019.
    u2022     After choosing to create the function module, you will get the warning: "Function module name is reserved for SAP". This message is just a warning so a developer does not accidentally create a function module in the field exit name range. By pressing u2018Enteru2019, you will be able to go ahead and create the function module.
    u2022     Before coding the function module, you will have to specify the function modules attributes -- function group, application, and short text.
    Step 5: Code Function Module
    u2022     From the function moduleu2019s attributes screen, click on the u2018Source codeu2019 pushbutton or choose the Goto -> Function module menu path to the code of the function module.
    u2022     Here you will add your desired functionality for the field exit.
    u2022     Remember that field exitu2019s function module will have two parameters -- one importing parameter called "INPUT" and one exporting parameter called "OUTPUT". These parameters will be set up automatically by the system.
    u2022     You must remember to assign a value to the OUTPUT field. Even if the value does not change, it must be moved from the INPUT field to the OUTPUT field.
    Step 6: Activate Function Module
    u2022     After coding the function module, you must remember to activate it.
    u2022     Use the Function module -> Activate menu path to activate the function module.
    u2022     At this point, you can return to the field exit transaction.
    u2022     You should be able to 'green arrow' back to this transaction.
    u2022     When you return to the field exit transaction, you will see an entry for the newly created field exit.
    u2022     At this point, the field exit is global. That is, it applies to all screens that use a particular data element. On any screen that uses the data element, the corresponding field exit function module will be triggered, once it is active.
    u2022     Also, the field exit will not be triggered yet because it is inactive.
    Step 7: Assign Program/Screen
    u2022     This step is only needed if you want to make a field exit local.
    u2022     To make a field exit local, select the field exit and click on the u2018Assign prog./screenu2019 pushbutton.
    u2022     In the dialog box , indicate the appropriate program name and screen number.
    This information indicates that the field exit is local to the specified screen in the specified program.
    u2022     In the dialog box, you determine which function module gets executed for the field exit by specifying the identifier in the u2018Fld. Exitu2019 field.
    u2022     If this field is left blank, the function module triggered will be 'FIELD_EXIT_<data element>'.
    u2022     If a single-character identifier is entered into the field, the function module triggered will be 'FIELD_EXIT_<data element>_<identifier>'.
    Step 8: Activate Field Exit
    u2022     The field exit must be active for it to be triggered by the system.
    u2022     Activate the field exit by choosing the Field exit -> Activate menu path.
    u2022     After assigning the field exit to a change request, its status will change to u2018Activeu2019 and it will be triggered automatically on the appropriate screen(s).
    NOTE : In order to activate the field exit the profile parameter abap/fieldexit = YES must be set on all application servers
    Execute the transaction SE38 with PROGRAM NAME - RSMODPRF
    Then give the Data Element Name for which field you want to create the exit(Just cross check with your field data element) and execute.
    then it takes you to SE37 with the function module name FIELD_EXIT_<DATA ELEMENT NAME> and then create the same function module.
    and in the coding part, You can write your logic to display the output of that field. and activate it.
    once you complete the above,
    Again execute SE38 transaction with program RSMODPRF and again click on Execute button without any Data Element Name. Now you select the data element which you have created and click on Assign prog/ Screen button and assign the program name and screen number of the filed and click on the menu Field Exit and Activate.
    Hope it helps.
    Regards
    Radhika
    Edited by: Radhika Pande on Nov 26, 2009 7:58 AM

  • User-exits for PO and MIGO

    Hello Experts
    i am having a requirement where in i will have to perform certain validations before posting PO and material document (MIGO). If these validations fail, PO or Material document should not be posted.
    i managed to find certain BADI and user-exits (MB_CF001 and MB_DOCUMENT_BADI) typically for MIGO but when tested they use to get triggered once these doucment numbers are generated.
    what i am looking at is cancel the process by giving the hard-error.
    thanks in advance.
    regards
    rajeev

    Hi,
    <b>User exits for MIGO:</b>
    MBCF0002 Customer function exit: Segment text in material doc. item
    MBCF0005 Material document item for goods receipt/issue slip
    MBCF0006 Customer function for WBS element
    MBCF0007 Customer function exit: Updating a reservation
    MBCF0009 Filling the storage location field
    MBCF0010 Customer exit: Create reservation BAPI_RESERVATION_CREATE1
    MBCF0011 Read From RESB and RKPF For Print List in MB26
    MBCFC003 Maintenance of batch master data for goods movements
    MBCFC004 Maintenance of batch specifications for goods movements
    MB_CF001 Customer Function Exit in the Case of Updating a Mat. Doc.
    <b>User eits for PO:</b>
    These are the User exit for CO01 ( Create PO)
    CCOWB001 Customer exit for modifying menu entries
    COIB0001 Customer Exit for As-Built Assignment Tool
    COZF0001 Change purchase req. for externally processed operation
    COZF0002 Change purchase req. for externally procured component
    PPCO0001 Application development: PP orders
    PPCO0002 Check exit for setting delete mark / deletion indicator
    PPCO0003 Check exit for order changes from sales order
    PPCO0004 Sort and processing exit: Mass processing orders
    PPCO0005 Storage location/backflushing when order is created
    PPCO0006 Enhancement to specify defaults for fields in order header
    PPCO0007 Exit when saving production order
    PPCO0008 Enhancement in the adding and changing of components
    PPCO0009 Enhancement in goods movements for prod. process order
    PPCO0010 Enhancement in make-to-order production - Unit of measure
    PPCO0012 Production Order: Display/Change Order Header Data
    PPCO0013 Change priorities of selection crit. for batch determination
    PPCO0015 Additional check for document links from BOMs
    PPCO0016 Additional check for document links from master data
    PPCO0017 Additional check for online processing of document links
    PPCO0018 Check for changes to production order header
    PPCO0019 Checks for changes to order operations
    PPCO0021 Release Control for Automatic Batch Determination
    PPCO0022 Determination of Production Memo
    PPCO0023 Checks Changes to Order Components
    STATTEXT Modification exit for formatting
    I am giving you the list of all user exits available for ME21N:
    AMPL0001 User subscreen for additional data on AMPL
    LMEDR001 Enhancements to print program
    LMELA002 Adopt batch no. from shipping notification when posting a GR
    LMELA010 Inbound shipping notification: Transfer item data from IDOC
    LMEQR001 User exit for source determination
    LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
    LWSUS001 Customer-Specific Source Determination in Retail
    M06B0001 Role determination for purchase requisition release
    M06B0002 Changes to comm. structure for purchase requisition release
    M06B0003 Number range and document number
    M06B0004 Number range and document number
    M06B0005 Changes to comm. structure for overall release of requisn.
    M06E0004 Changes to communication structure for release purch. doc.
    M06E0005 Role determination for release of purchasing documents
    ME590001 Grouping of requsitions for PO split in ME59
    MEETA001 Define schedule line type (backlog, immed. req., preview)
    MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
    MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
    MEQUERY1 Enhancement to Document Overview ME21N/ME51N
    MEVME001 WE default quantity calc. and over/ underdelivery tolerance
    MM06E001 User exits for EDI inbound and outbound purchasing documents
    MM06E003 Number range and document number
    MM06E004 Control import data screens in purchase order
    MM06E005 Customer fields in purchasing document
    MM06E007 Change document for requisitions upon conversion into PO
    MM06E008 Monitoring of contr. target value in case of release orders
    MM06E009 Relevant texts for "Texts exist" indicator
    MM06E010 Field selection for vendor address
    MMAL0001 ALE source list distribution: Outbound processing
    MMAL0002 ALE source list distribution: Inbound processing
    MMAL0003 ALE purcasing info record distribution: Outbound processing
    MMAL0004 ALE purchasing info record distribution: Inbound processing
    MMDA0001 Default delivery addresses
    MMFAB001 User exit for generation of release order
    MRFLB001 Control Items for Contract Release Order
    For your purpose you can probably try MM06E005. Or you can also try BADI ME_PROCESS_PO_CUST.
    You can also check this BADI available for PO:
    EXTENSION_US_TAXES Extended Tax Calculation with Additional Data
    ME_ACTV_CANCEL_PO BAdI for Activating the Cancel Function at Header Level
    ME_BAPI_PR_CHANGE_01 BAdI: Enjoy BAPIs for Purchase Requisitions (Method Chan
    ME_BAPI_PR_CHANGE_02 BAdI: Enjoy BAPIs for Purchase Requisitions (Method Chan
    ME_BAPI_PR_CREATE_01 BAdI: Enjoy BAPIs for Purchase Requisitions
    ME_BAPI_PR_CREATE_02 BAdI: Enjoy BAPIs for Purchase Requisitions (Method Crea
    ME_BSART_DET Change document type for automatically generated POs
    ME_CCP_BESWK_AUTH_CH BAdI for authorization checks for procuring plant
    ME_CCP_DEL_DURATION Calc. of Delivery Duration in CCP Process (Not in Standa
    ME_CHANGE_CHARACTER Customer-Specific Characteristics for Product Allocation
    ME_CHECK_ALL_ITEMS Run Through Items Again in the Event of Changes in EKKO
    ME_CHECK_SOURCES Additional Checks in Source Determination/Checking
    ME_CIN_LEINRF2R BADI for CIN India - Delivery charges
    ME_CIN_LEINRF2V BADI for LEINRF03 excise_invoice_details
    ME_CIN_MM06EFKO Copy PO data for use by Country version India
    ME_CIP_ALLOW_CHANGE Configuration in Purchasing: Changeability Control
    ME_COMMITMENT_STO_CH BadI for checking if commitments for STOs are active
    ME_COMMTMNT_PO_REL_C Check for Commitment-Relevance of Purchase Orders
    ME_COMMTMNT_REQ_RE_C Check of Commitment Relevance of Purchase Requisitions
    ME_DEFINE_CALCTYPE Control of Pricing Type: Additional Fields
    ME_GUI_PO_CUST Customer's Own Screens in Enjoy Purchase Order
    ME_HOLD_PO Hold Enjoy Purchase Orders: Activation/Deactivation
    ME_PO_SC_SRV BAdI: Service Tab Page for Subcontracting
    ME_PROCESS_COMP Processing of Component Default Data at Time of GR: Cust
    ME_PROCESS_PO_CUST Enhancements for Processing Enjoy Purchase Order: Custom
    ME_PROCESS_REQ_CUST Enhancements for Processing Enjoy PReqs: Customer
    ME_PURCHDOC_POSTED Purchasing Document Posted
    ME_RELEASE_CREATE BAdI: Release Creation for Sched. Agreemnts with Rel. Do
    ME_REQ_OI_EXT Commitment Update in the Case of External Requisitions
    ME_REQ_POSTED Purchase Requisition Posted
    ME_TAX_FROM_ADDRESS Tax jurisdiction code taken from address
    ME_TRIGGER_ATP Triggers New ATP for Changes in EKKO, EKPO, EKPV
    MM_EDI_DESADV_IN Supplementation of Delivery Interface from Purchase Orde
    SMOD_MRFLB001 Control Items for Contract Release Order
    Transaction codes for BADI are:
    SE18 - Business Add-ins(BADI’s): Definition transaction
    SE19 - Business Add-ins(BADI’s): Implementation transaction
    SE24 - Class Builder
    Link for all user exits in SAP:
    http://www.easymarketplace.de/userexit.php
    Pls reward helpful points.
    Regards,
    Ameet

  • PC-WQS: User exit for material valuation

    Hello,
    Currently we use data from the purchase info records to carry out material valuation of raw materials in the cost estimate. The client would like to get this data from the contracts instead of the info records since all purchase orders get information from the contracts. The second reason is that maintenance of the info record is very cumbersome and prone to errors when creating or updating the cost/ quantity.
    My question is, has anyone used the user exit COPCP005 - User exit for material valuation (strategy U) in the valuation variant and has anyone gone after the contracts to get the purchase price?
    If yes, I would like to know how you did it.
    Thanks,
    dinesh

    Can you explain a little more where you encountered the problem?
    1. Is there a Val Strategy before the Val Strat U that is probably able to find a price for costing?
    2. Is the User Exit being triggered?
    3. Can you run CK11N in the debug mode (/h) and check if the User Exit is triggered?
    4. If all of these occur, the problem probably lies in the ABAP code... check for changes in the material number range or plant codes, or the plant-specific material status - the system does not valuate if the status does not permit it to.
    If nothing works, come back with confirmation of the above and we'll go forward from there.
    Cheers.

  • BAdI: or User Exit  for Campaign Creation

    Hi all,
              we are working in CRM 5.0,
    we have a Requirement like :
          when we create the campaign it should check higher level project ID        (marketing Plan ID)
          if it is there it should permit for create campaign else it ll show error...
    Any BAdI: or User Exit  for Campaign Creation?
    I ll geive reward points....
    Rhanks & Regards,
    Ganesh

    Dear Ganesh,
    As campaign can be created and executed individually also, it will never check for higher level project ID.
    Let me check the system if we can block creation of campaign individually, without having a higher level marketing plan.

  • User Exit for Tax Determination

    Hi Friends,
    I am working on Purchase Order(PO) creation process and my client requirement is, if the vendor is based in UK and even delievery is going to abroad, system should call normal tax code instead of SAP standard (which is; sap considers it as export and apply customs duty).
    Anybody know about the User Exit in the Tax Code (Tax) determination process where I can change the Tax Code during runtime?
    Regards,
    Shabbar

    These are the user exits for the purchase order.
    V02V0001-Salesarea determination for stock transport order
    V02V0002-User exit for storage location determination
    V02V0003-User exit for gate + matl staging area determination (headr)
    V02V0004-User Exit for Staging Area Determination (Item) 
    V50PSTAT-Delivery: Item Status Calculation
    V50Q0001-Delivery Monitor: User Exits for Filling Display Fields
    V50R0001-Collective processing for delivery creation
    V50R0002-Collective processing for delivery creation
    V50R0004-Calculation of Stock for POs for Shipping Due Date List
    V50S0001-User Exits for Delivery Processing
    V53C0001-Rough workload calculation in time per item
    V53C0002-W&S: RWE enhancement - shipping material type/time slot
    V53W0001-User exits for creating picking waves
    VMDE0001-Shipping Interface: Error Handling - Inbound IDoc
    VMDE0002-Shipping Interface: Message PICKSD (Picking, Outbound)
    VMDE0003-Shipping Interface: Message SDPICK (Picking, Inbound)
    VMDE0004-Shipping Interface: Message SDPACK (Packing, Inbound)
    Award poits if this was helpful.
    Thanks and regards.

  • User exit for item level in PO

    Hi:
    Once we create a PO based on PR. I should not be able to change the net price. I need to through a ERROR MESSAGE.
    The price of PR and PO Shuold be same. Used should not change the net price, If he tries to change it, A error msg should be thrown.
    Please let me know the Correct User Exit for this.
    Thanks
    Senthil

    Hi,
    Please check sample program to find user exits available for a given transaction code.
    REPORT z_find_userexit NO STANDARD PAGE HEADING.
    *&  Enter the transaction code that you want to search through in order
    *&  to find which Standard SAP User Exits exists.
    *& Tables
    TABLES : tstc,     "SAP Transaction Codes
             tadir,    "Directory of Repository Objects
             modsapt,  "SAP Enhancements - Short Texts
             modact,   "Modifications
             trdir,    "System table TRDIR
             tfdir,    "Function Module
             enlfdir,  "Additional Attributes for Function Modules
             tstct.    "Transaction Code Texts
    *& Variables
    DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
    DATA : field1(30).
    DATA : v_devclass LIKE tadir-devclass.
    *& Selection Screen Parameters
    SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
    SELECTION-SCREEN SKIP.
    PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
    SELECTION-SCREEN SKIP.
    SELECTION-SCREEN END OF BLOCK a01.
    *& Start of main program
    START-OF-SELECTION.
    Validate Transaction Code
      SELECT SINGLE * FROM tstc
        WHERE tcode EQ p_tcode.
    Find Repository Objects for transaction code
      IF sy-subrc EQ 0.
        SELECT SINGLE * FROM tadir
           WHERE pgmid    = 'R3TR'
             AND object   = 'PROG'
             AND obj_name = tstc-pgmna.
        MOVE : tadir-devclass TO v_devclass.
        IF sy-subrc NE 0.
          SELECT SINGLE * FROM trdir
             WHERE name = tstc-pgmna.
          IF trdir-subc EQ 'F'.
            SELECT SINGLE * FROM tfdir
              WHERE pname = tstc-pgmna.
            SELECT SINGLE * FROM enlfdir
              WHERE funcname = tfdir-funcname.
            SELECT SINGLE * FROM tadir
              WHERE pgmid    = 'R3TR'
                AND object   = 'FUGR'
                AND obj_name = enlfdir-area.
            MOVE : tadir-devclass TO v_devclass.
          ENDIF.
        ENDIF.
    Find SAP Modifactions
        SELECT * FROM tadir
          INTO TABLE jtab
          WHERE pgmid    = 'R3TR'
            AND object   = 'SMOD'
            AND devclass = v_devclass.
        SELECT SINGLE * FROM tstct
          WHERE sprsl EQ sy-langu
            AND tcode EQ p_tcode.
        FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
        WRITE:/(19) 'Transaction Code - ',
        20(20) p_tcode,
        45(50) tstct-ttext.
        SKIP.
        IF NOT jtab[] IS INITIAL.
          WRITE:/(95) sy-uline.
          FORMAT COLOR COL_HEADING INTENSIFIED ON.
          WRITE:/1 sy-vline,
          2 'Exit Name',
          21 sy-vline ,
          22 'Description',
          95 sy-vline.
          WRITE:/(95) sy-uline.
          LOOP AT jtab.
            SELECT SINGLE * FROM modsapt
            WHERE sprsl = sy-langu AND
            name = jtab-obj_name.
            FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
            WRITE:/1 sy-vline,
            2 jtab-obj_name HOTSPOT ON,
            21 sy-vline ,
            22 modsapt-modtext,
            95 sy-vline.
          ENDLOOP.
          WRITE:/(95) sy-uline.
          DESCRIBE TABLE jtab.
          SKIP.
          FORMAT COLOR COL_TOTAL INTENSIFIED ON.
          WRITE:/ 'No of Exits:' , sy-tfill.
        ELSE.
          FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
          WRITE:/(95) 'No User Exit exists'.
        ENDIF.
      ELSE.
        FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
        WRITE:/(95) 'Transaction Code Does Not Exist'.
      ENDIF.
    Take the user to SMOD for the Exit that was selected.
    AT LINE-SELECTION.
      GET CURSOR FIELD field1.
      CHECK field1(4) EQ 'JTAB'.
      SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
      CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
    or
    Enhancement
    MEVME001 WE default quantity calc. and over/ underdelivery tolerance
    MM06E001 User exits for EDI inbound and outbound purchasing documents
    MM06E003 Number range and document number
    MM06E004 Control import data screens in purchase order
    MM06E005 Customer fields in purchasing document
    MM06E007 Change document for requisitions upon conversion into PO
    MM06E008 Monitoring of contr. target value in case of release orders
    MM06E009 Relevant texts for "Texts exist" indicator
    MM06E010 Field selection for vendor address
    MM06E011 Activate PReq Block
    MMAL0001 ALE source list distribution: Outbound processing
    MMAL0002 ALE source list distribution: Inbound processing
    MMAL0003 ALE purcasing info record distribution: Outbound processing
    MMAL0004 ALE purchasing info record distribution: Inbound processing
    MMDA0001 Default delivery addresses
    MMFAB001 User exit for generation of release order
    MRFLB001 Control Items for Contract Release Order
    AMPL0001 User subscreen for additional data on AMPL
    LMEDR001 Enhancements to print program
    LMELA002 Adopt batch no. from shipping notification when posting a GR
    LMELA010 Inbound shipping notification: Transfer item data from IDOC
    LMEQR001 User exit for source determination
    LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
    LWSUS001 Customer-Specific Source Determination in Retail
    M06B0001 Role determination for purchase requisition release
    M06B0002 Changes to comm. structure for purchase requisition release
    M06B0003 Number range and document number
    MEQUERY1 Enhancement to Document Overview ME21N/ME51N
    MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
    MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
    MEETA001 Define schedule line type (backlog, immed. req., preview)
    ME590001 Grouping of requsitions for PO split in ME59
    M06E0005 Role determination for release of purchasing documents
    M06E0004 Changes to communication structure for release purch. doc.
    M06B0005 Changes to comm. structure for overall release of requisn.
    M06B0004 Number range and document number
    Business Add-in
    ME_PROCESS_REQ_CUST Enhancements for Processing Enjoy PReqs: Customer
    ME_PROCESS_REQ Enhancements for Processing Enjoy PReqs: Internal
    ME_PROCESS_PO_CUST Enhancements for Processing Enjoy Purchase Order: Customer
    ME_PROCESS_PO Enhancements for Processing Enjoy Purchase Order: Intern.
    ME_PROCESS_COMP Processing of Component Default Data at Time of GR: Custome
    ME_PO_SC_SRV BAdI: Service Tab Page for Subcontracting
    ME_PO_PRICING_CUST Enhancements to Price Determination: Customer
    ME_PO_PRICING Enhancements to Price Determination: Internal
    ME_INFOREC_SEND Capture/Send Purchase Info Record Changes - Internal Use
    ME_HOLD_PO Hold Enjoy Purchase Orders: Activation/Deactivation
    ME_GUI_PO_CUST Customer's Own Screens in Enjoy Purchase Order
    ME_FIELDSTATUS_STOCK FM Account Assignment Behavior for Stock PR/PO
    ME_DP_CLEARING Clearing (Offsetting) of Down Payments and Payment Requests
    ME_PURCHDOC_POSTED Purchasing Document Posted
    SMOD_MRFLB001 Control Items for Contract Release Order
    EXTENSION_US_TAXES Extended Tax Calculation with Additional Data
    ARC_MM_EKKO_WRITE BAdI: Enhancement of Scope of Archiving (MM_EKKO)
    ARC_MM_EKKO_CHECK BAdI: Enhancement of Archivability Check (MM_EKKO)
    MM_EDI_DESADV_IN Supplementation of Delivery Interface from Purchase Order
    MM_DELIVERY_ADDR_SAP Determination of Delivery Address
    ME_WRF_STD_DNG PO Controlling Reminder: Extension to Standard Reminder
    ME_TRIGGER_ATP Triggers New ATP for Changes in EKKO, EKPO, EKPV
    ME_TRF_RULE_CUST_OFF BADI for Deactivation of Field T161V-REVFE
    ME_TAX_FROM_ADDRESS Tax jurisdiction code taken from address
    ME_REQ_POSTED Purchase Requisition Posted
    ME_REQ_OI_EXT Commitment Update in the Case of External Requisitions
    ME_RELEASE_CREATE BAdI: Release Creation for Sched.Agrmts with Release Docu.
    ME_DEFINE_CALCTYPE Control of Pricing Type: Additional Fields
    ME_CHANGE_OUTTAB Enrich ALV Output Table in Purchasing
    ME_CHANGE_CHARACTER Customer-Specific Characteristics for Product Allocation
    ME_CCP_DEL_DURATION Calc. of Delivery Duration in CCP Process (Not in Standard)
    ME_CCP_BESWK_AUTH_CH BAdI for authorization checks for procuring plant
    ME_CCP_ACTIVE_CHECK BAdI to check whether CCP process is active
    ME_BSART_DET Change document type for automatically generated POs
    ME_BAPI_PR_CREATE_02
    ME_BAPI_PR_CREATE_01
    ME_BAPI_PO_CREATE_02
    ME_BAPI_PO_CREATE_01
    ME_BADI_DISPLAY_DOC BAdI for Internal Control of Transaction to be Invoked
    ME_ACTV_CANCEL_PO BAdI for Activating the Cancel Function at Header Level
    MEGUI_LAYOUT BAdI for Enjoy Purchasing GUI
    ME_CHECK_ALL_ITEMS Run Through Items Again in the Event of Changes in EKKO
    ME_COMMTMNT_REQ_RE_C Check of Commitment Relevance of Purchase Requisitions
    ME_COMMTMNT_REQ_RELE Check of Commitment Relevance of Purchase Requisitions
    ME_COMMTMNT_PO_REL_C Check for Commitment-Relevance of Purchase Orders
    ME_COMMTMNT_PO_RELEV Check for Commitment-Relevance of Purchase Orders
    ME_COMMITMENT_STO_CH BadI for checking if commitments for STOs are active
    ME_COMMITMENT_RETURN Commitment for return item
    ME_CIP_REF_CHAR Enables Reference Characteristics in Purchasing
    ME_CIP_ALLOW_CHANGE Configuration in Purchasing: Changeability Control
    ME_CIN_MM06EFKO Copy PO data for use by Country version India
    ME_CIN_LEINRF2V BADI for LEINRF03 excise_invoice_details
    ME_CIN_LEINRF2R BADI for CIN India - Delivery charges
    ME_CHECK_SOURCES Additional Checks in Source Determination/Checking
    ME_CHECK_OA Check BAdI for Contracts
    Reward if helpful.
    Regards,
    Harini.S

  • User exit for ME22N

    Hi!
    Here's our scenario: we wanted our PO to be non-editable when it comes to price when it has already a goods receipt. But right now, the system allows it and no available system messages can suffice the requirement. Is there an available user exit for this?
    Thank you.

    Hi,
    Do one thing use the BADI ME_PROCESS_PO_CUST .....in this you have one method PROCESS_ITEM use this and try to pass error message depending on your condition(whether goods reciept happend or not)....
    Thanks,
    Shailaja Ainala.

Maybe you are looking for

  • Converted Keynote doesn't show all TextBlocks in Flash

    I have created a small Keynote Presentation with 25 pages and converted it into Flash to upload it on our Server. We are a small charity Org. with very limited budget and have seen a few nicely done websites, created with iWork and tried to do the sa

  • IMac 24inch 2.4GHz Logic Board Core 2 Duo

    I have a white 24 inch Imac 2.16 ghz computer got in 2007.Having problems with mouse cursor not showing on monitor takes 10 to 15 seconds to come back.I think it is the video card aNvidia GeForce 7300GT.Found info on google on this problem in some si

  • Safari has stopped working (common problem?)

    I can access the internet through a 4 port ethernet router via internet explorer, however, Safari fails to load home page and shows the working icon. I cannot access the preferences or any aspect of the program, have to force quit . I downloaded the

  • [urgent]online game development

    i would like to know if i hope to develop an online game, like what we play in yahoo reversi, once the user put the black peg , the oponent can see he / she put the black peg , how this would be done...any recommend site to learn the online game prog

  • Can i install 'extra audio content' after i have installed the main program?

    hello all! i need to install the 'extra audio content' that comes with Logic, as i didnt include them when installing in the first place. how do i go about doing this? i mainly need all the different presents and chanel strips, not so bothered about